From a75102bbbcfd2624b59f49df7e0b6b47b4702e97 Mon Sep 17 00:00:00 2001 From: Chukun Pan Date: Tue, 13 Feb 2024 23:17:10 +0800 Subject: [PATCH] qualcommax: dts: cleanup whitespace Replace blanks with tabs, remove extra blank lines. Also add new lines as appropriate. Signed-off-by: Chukun Pan --- .../arm64/boot/dts/qcom/ipq6010-mango-dvk.dts | 1 + .../arm64/boot/dts/qcom/ipq8072-mx5300.dts | 4 +++ .../arm64/boot/dts/qcom/ipq8072-wax620.dts | 1 - .../arm64/boot/dts/qcom/ipq8072-wpq873.dts | 26 +++++++++---------- .../arm64/boot/dts/qcom/ipq8074-ac-cpu.dtsi | 1 + .../arm64/boot/dts/qcom/ipq8074-hk-cpu.dtsi | 1 + .../arm64/boot/dts/qcom/ipq8074-nbg7815.dts | 3 --- .../arm64/boot/dts/qcom/ipq8074-wax630.dts | 2 +- 8 files changed, 20 insertions(+), 19 deletions(-) diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6010-mango-dvk.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6010-mango-dvk.dts index a64a3cd6e6..ebda536f45 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6010-mango-dvk.dts +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6010-mango-dvk.dts @@ -314,6 +314,7 @@ nand-ecc-strength = <4>; nand-ecc-step-size = <512>; nand-bus-width = <8>; + partitions { compatible = "fixed-partitions"; #address-cells = <1>; diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-mx5300.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-mx5300.dts index e44731a1be..9d28f2ad0d 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-mx5300.dts +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-mx5300.dts @@ -317,21 +317,25 @@ label = "alt_rootfs"; reg = <0xac80000 0x9000000>; }; + partition@13c80000 { label = "sysdiag"; reg = <0x13c80000 0x200000>; read-only; }; + partition@13e80000 { label = "0:ethphyfw"; reg = <0x13e80000 0x80000>; read-only; }; + partition@13f00000 { label = "syscfg"; reg = <0x13f00000 0xb800000>; read-only; }; + partition@1f700000 { label = "0:wififw"; reg = <0x1f700000 0x900000>; diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-wax620.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-wax620.dts index 74dae6cbf3..ceb719d813 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-wax620.dts +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-wax620.dts @@ -106,7 +106,6 @@ label = "wlan5g:green"; gpios = <&led_gpio 5 GPIO_ACTIVE_HIGH>; }; - }; }; diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-wpq873.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-wpq873.dts index 7d7f54ea62..5b2c1d570f 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-wpq873.dts +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-wpq873.dts @@ -350,7 +350,6 @@ status = "okay"; }; - &mdio { status = "okay"; pinctrl-0 = <&mdio_pins>; @@ -384,7 +383,6 @@ reg = <28>; reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; }; - }; &switch { @@ -422,27 +420,27 @@ }; &dp2 { - status = "okay"; - phy-handle = <&qca8075_1>; - label = "lan1"; + status = "okay"; + phy-handle = <&qca8075_1>; + label = "lan1"; }; &dp3 { - status = "okay"; - phy-handle = <&qca8075_2>; - label = "lan2"; + status = "okay"; + phy-handle = <&qca8075_2>; + label = "lan2"; }; &dp4 { - status = "okay"; - phy-handle = <&qca8075_3>; - label = "lan3"; + status = "okay"; + phy-handle = <&qca8075_3>; + label = "lan3"; }; &dp6 { - status = "okay"; - phy-handle = <&qca8081>; - label = "wan"; + status = "okay"; + phy-handle = <&qca8081>; + label = "wan"; }; &pcie_qmp0 { diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-ac-cpu.dtsi b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-ac-cpu.dtsi index 057d592031..6cf8bad5b1 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-ac-cpu.dtsi +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-ac-cpu.dtsi @@ -22,6 +22,7 @@ cpu-supply = <&apc_vreg>; voltage-tolerance = <1>; }; + &cpu0_thermal { trips { cpu0_passive: cpu-passive { diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-hk-cpu.dtsi b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-hk-cpu.dtsi index 37af7bbc1f..b7d746c44e 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-hk-cpu.dtsi +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-hk-cpu.dtsi @@ -22,6 +22,7 @@ cpu-supply = <&apc_vreg>; voltage-tolerance = <1>; }; + &cpu0_thermal { trips { cpu0_passive_low: cpu-passive-low { diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-nbg7815.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-nbg7815.dts index ac3077b29d..f508ada978 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-nbg7815.dts +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-nbg7815.dts @@ -13,7 +13,6 @@ #include #include - / { model = "Zyxel NBG7815"; compatible = "zyxel,nbg7815", "qcom,ipq8074"; @@ -59,7 +58,6 @@ }; }; - &blsp1_uart3 { status = "okay"; }; @@ -105,7 +103,6 @@ status = "disabled"; }; - flash@0 { #address-cells = <1>; #size-cells = <1>; diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-wax630.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-wax630.dts index 35f0c3e220..3393efd7b5 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-wax630.dts +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-wax630.dts @@ -15,7 +15,7 @@ aliases { serial0 = &blsp1_uart5; - + ethernet0 = &dp6_syn; ethernet1 = &dp4; label-mac-device = &dp6_syn; -- 2.30.2