From a721fb9f839b3ca71da275a1c99620ef9342fb28 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Wed, 30 Mar 2022 16:05:55 +0200 Subject: [PATCH] bcm53xx: backport DT changes from 5.17 & 5.18 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki --- ...use-non-deprecated-USB-2.0-PHY-bind.patch} | 4 +- ...ts-NSP-Fixed-iProc-PCIe-MSI-sub-node.patch | 42 +++++++ ...08-ARM-dts-NSP-Rename-SATA-unit-name.patch | 25 ++++ ...-correct-RX-delay-and-enable-flow-co.patch | 45 ++++++++ ...CM5301X-define-RTL8365MB-switch-on-A.patch | 109 ++++++++++++++++++ ...-define-RTL8365MB-switch-on-Asus-RT-.patch | 103 +++++++++++++++++ ...NSP-MX6X-get-mac-address-from-eeprom.patch | 40 +++++++ ...-NSP-MX6X-correct-LED-function-types.patch | 62 ++++++++++ ...-Add-Ethernet-MAC-address-to-Luxul-X.patch | 42 +++++++ 9 files changed, 471 insertions(+), 1 deletion(-) rename target/linux/bcm53xx/patches-5.10/{130-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch => 034-v5.17-0006-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch} (89%) create mode 100644 target/linux/bcm53xx/patches-5.10/034-v5.17-0007-ARM-dts-NSP-Fixed-iProc-PCIe-MSI-sub-node.patch create mode 100644 target/linux/bcm53xx/patches-5.10/034-v5.17-0008-ARM-dts-NSP-Rename-SATA-unit-name.patch create mode 100644 target/linux/bcm53xx/patches-5.10/034-v5.17-0009-ARM-dts-BCM5301X-correct-RX-delay-and-enable-flow-co.patch create mode 100644 target/linux/bcm53xx/patches-5.10/034-v5.17-0010-Revert-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-A.patch create mode 100644 target/linux/bcm53xx/patches-5.10/035-v5.18-0001-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch create mode 100644 target/linux/bcm53xx/patches-5.10/035-v5.18-0002-ARM-dts-NSP-MX6X-get-mac-address-from-eeprom.patch create mode 100644 target/linux/bcm53xx/patches-5.10/035-v5.18-0003-ARM-dts-NSP-MX6X-correct-LED-function-types.patch create mode 100644 target/linux/bcm53xx/patches-5.10/035-v5.18-0004-ARM-dts-BCM5301X-Add-Ethernet-MAC-address-to-Luxul-X.patch diff --git a/target/linux/bcm53xx/patches-5.10/130-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0006-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch similarity index 89% rename from target/linux/bcm53xx/patches-5.10/130-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch rename to target/linux/bcm53xx/patches-5.10/034-v5.17-0006-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch index e50bcd9f2543..e01927bedfef 100644 --- a/target/linux/bcm53xx/patches-5.10/130-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch +++ b/target/linux/bcm53xx/patches-5.10/034-v5.17-0006-ARM-dts-BCM5301X-use-non-deprecated-USB-2.0-PHY-bind.patch @@ -1,5 +1,6 @@ +From 1a46061a2a4130a08841941ce6dcaa32be2ce312 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Tue, 23 Nov 2021 09:55:06 +0100 +Date: Tue, 23 Nov 2021 10:03:33 +0100 Subject: [PATCH] ARM: dts: BCM5301X: use non-deprecated USB 2.0 PHY binding MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 @@ -10,6 +11,7 @@ register. References: 55b9b741712d ("dt-bindings: phy: brcm,ns-usb2-phy: bind just a PHY block") Signed-off-by: Rafał Miłecki +Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm5301x.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/target/linux/bcm53xx/patches-5.10/034-v5.17-0007-ARM-dts-NSP-Fixed-iProc-PCIe-MSI-sub-node.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0007-ARM-dts-NSP-Fixed-iProc-PCIe-MSI-sub-node.patch new file mode 100644 index 000000000000..730b989808ab --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/034-v5.17-0007-ARM-dts-NSP-Fixed-iProc-PCIe-MSI-sub-node.patch @@ -0,0 +1,42 @@ +From 69c4e53bdd055ecc27761f6971a50c631ff9072e Mon Sep 17 00:00:00 2001 +From: Florian Fainelli +Date: Thu, 2 Dec 2021 15:16:27 -0800 +Subject: [PATCH] ARM: dts: NSP: Fixed iProc PCIe MSI sub-node + +Rename the msi controller unit name to 'msi' to avoid collisions with +the 'msi-controller' boolean property. + +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm-nsp.dtsi | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/bcm-nsp.dtsi ++++ b/arch/arm/boot/dts/bcm-nsp.dtsi +@@ -587,7 +587,7 @@ + status = "disabled"; + + msi-parent = <&msi0>; +- msi0: msi-controller { ++ msi0: msi { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; +@@ -624,7 +624,7 @@ + status = "disabled"; + + msi-parent = <&msi1>; +- msi1: msi-controller { ++ msi1: msi { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; +@@ -661,7 +661,7 @@ + status = "disabled"; + + msi-parent = <&msi2>; +- msi2: msi-controller { ++ msi2: msi { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; diff --git a/target/linux/bcm53xx/patches-5.10/034-v5.17-0008-ARM-dts-NSP-Rename-SATA-unit-name.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0008-ARM-dts-NSP-Rename-SATA-unit-name.patch new file mode 100644 index 000000000000..fd90fbf1f68a --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/034-v5.17-0008-ARM-dts-NSP-Rename-SATA-unit-name.patch @@ -0,0 +1,25 @@ +From 9a68c53f875e88edd3403c001ad85f4ac0ed3486 Mon Sep 17 00:00:00 2001 +From: Florian Fainelli +Date: Tue, 7 Dec 2021 10:19:09 -0800 +Subject: [PATCH] ARM: dts: NSP: Rename SATA unit name + +Rename the SATA controller unit name from ahci to sata in preparation +for adding the Broadcom SATA3 controller YAML binding which will bring +validation. + +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm-nsp.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/bcm-nsp.dtsi ++++ b/arch/arm/boot/dts/bcm-nsp.dtsi +@@ -534,7 +534,7 @@ + }; + }; + +- sata: ahci@41000 { ++ sata: sata@41000 { + compatible = "brcm,bcm-nsp-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0x41000 0x1000>, <0x40020 0x1c>; diff --git a/target/linux/bcm53xx/patches-5.10/034-v5.17-0009-ARM-dts-BCM5301X-correct-RX-delay-and-enable-flow-co.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0009-ARM-dts-BCM5301X-correct-RX-delay-and-enable-flow-co.patch new file mode 100644 index 000000000000..e81ec169b983 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/034-v5.17-0009-ARM-dts-BCM5301X-correct-RX-delay-and-enable-flow-co.patch @@ -0,0 +1,45 @@ +From 5e33f1c4a7cb914a003a304ab8eef705b17aabb7 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= +Date: Fri, 17 Dec 2021 00:03:19 +0800 +Subject: [PATCH] ARM: dts: BCM5301X: correct RX delay and enable flow control + on Asus RT-AC88U +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The current 'rx-internal-delay-ps' property value on the Realtek switch +node, 2000, will be divided by 300, resulting in 6.66, which will be +rounded to the closest step value, 7. Change it to 2100 to be accurate. +See ef136837aaf6 ("net: dsa: rtl8365mb: set RGMII RX delay in steps of +0.3 ns") for reference. + +Flow control needs to be enabled on both sides of the internal and +external switch. It is already enabled on the CPU port of the Realtek +switch so we also enable it on the external switch port of the Broadcom +switch as well. + +Signed-off-by: Arınç ÜNAL +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts ++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +@@ -138,7 +138,7 @@ + ethernet = <&sw0_p5>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <2000>; +- rx-internal-delay-ps = <2000>; ++ rx-internal-delay-ps = <2100>; + + fixed-link { + speed = <1000>; +@@ -213,6 +213,7 @@ + fixed-link { + speed = <1000>; + full-duplex; ++ pause; + }; + }; + diff --git a/target/linux/bcm53xx/patches-5.10/034-v5.17-0010-Revert-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-A.patch b/target/linux/bcm53xx/patches-5.10/034-v5.17-0010-Revert-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-A.patch new file mode 100644 index 000000000000..3d814b1252e1 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/034-v5.17-0010-Revert-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-A.patch @@ -0,0 +1,109 @@ +From 8b0c59c622dc4dab970ec63264fb5b152944ac80 Mon Sep 17 00:00:00 2001 +From: Arnd Bergmann +Date: Thu, 23 Dec 2021 00:17:17 +0100 +Subject: [PATCH] Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus + RT-AC88U" + +This reverts commit 3d2d52a0d1835b56f6bd67d268f6c39df0e41692, it caused +a build regression: + +arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:109.4-14: Warning (reg_format): /switch/ports:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) +arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' +arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' +arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' +arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' +arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #address-cells value +arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #size-cells value + +Reported-by: Stephen Rothwell +Signed-off-by: Arnd Bergmann +--- + arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 77 -------------------- + 1 file changed, 77 deletions(-) + +--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts ++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +@@ -93,83 +93,6 @@ + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + }; +- +- switch { +- compatible = "realtek,rtl8365mb"; +- /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */ +- mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; +- mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; +- reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; +- realtek,disable-leds; +- dsa,member = <1 0>; +- +- ports { +- #address-cells = <1>; +- #size-cells = <0>; +- reg = <0>; +- +- port@0 { +- reg = <0>; +- label = "lan5"; +- phy-handle = <ðphy0>; +- }; +- +- port@1 { +- reg = <1>; +- label = "lan6"; +- phy-handle = <ðphy1>; +- }; +- +- port@2 { +- reg = <2>; +- label = "lan7"; +- phy-handle = <ðphy2>; +- }; +- +- port@3 { +- reg = <3>; +- label = "lan8"; +- phy-handle = <ðphy3>; +- }; +- +- port@6 { +- reg = <6>; +- label = "cpu"; +- ethernet = <&sw0_p5>; +- phy-mode = "rgmii"; +- tx-internal-delay-ps = <2000>; +- rx-internal-delay-ps = <2100>; +- +- fixed-link { +- speed = <1000>; +- full-duplex; +- pause; +- }; +- }; +- }; +- +- mdio { +- compatible = "realtek,smi-mdio"; +- #address-cells = <1>; +- #size-cells = <0>; +- +- ethphy0: ethernet-phy@0 { +- reg = <0>; +- }; +- +- ethphy1: ethernet-phy@1 { +- reg = <1>; +- }; +- +- ethphy2: ethernet-phy@2 { +- reg = <2>; +- }; +- +- ethphy3: ethernet-phy@3 { +- reg = <3>; +- }; +- }; +- }; + }; + + &srab { diff --git a/target/linux/bcm53xx/patches-5.10/035-v5.18-0001-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch b/target/linux/bcm53xx/patches-5.10/035-v5.18-0001-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch new file mode 100644 index 000000000000..77d3420ff871 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/035-v5.18-0001-ARM-dts-BCM5301X-define-RTL8365MB-switch-on-Asus-RT-.patch @@ -0,0 +1,103 @@ +From 441d531ec9b766f49e01c107a3043235daa4493f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= +Date: Sun, 2 Jan 2022 23:33:04 +0300 +Subject: [PATCH] ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Define the Realtek RTL8365MB switch without interrupt support on the device +tree of Asus RT-AC88U. + +Signed-off-by: Arınç ÜNAL +Acked-by: Alvin Å ipraga +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 76 ++++++++++++++++++++ + 1 file changed, 76 insertions(+) + +--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts ++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +@@ -93,6 +93,82 @@ + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + }; ++ ++ switch { ++ compatible = "realtek,rtl8365mb"; ++ /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */ ++ mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; ++ mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; ++ reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; ++ realtek,disable-leds; ++ dsa,member = <1 0>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ label = "lan5"; ++ phy-handle = <ðphy0>; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ label = "lan6"; ++ phy-handle = <ðphy1>; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ label = "lan7"; ++ phy-handle = <ðphy2>; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ label = "lan8"; ++ phy-handle = <ðphy3>; ++ }; ++ ++ port@6 { ++ reg = <6>; ++ label = "cpu"; ++ ethernet = <&sw0_p5>; ++ phy-mode = "rgmii"; ++ tx-internal-delay-ps = <2000>; ++ rx-internal-delay-ps = <2100>; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ pause; ++ }; ++ }; ++ }; ++ ++ mdio { ++ compatible = "realtek,smi-mdio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ethphy0: ethernet-phy@0 { ++ reg = <0>; ++ }; ++ ++ ethphy1: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ ++ ethphy2: ethernet-phy@2 { ++ reg = <2>; ++ }; ++ ++ ethphy3: ethernet-phy@3 { ++ reg = <3>; ++ }; ++ }; ++ }; + }; + + &srab { diff --git a/target/linux/bcm53xx/patches-5.10/035-v5.18-0002-ARM-dts-NSP-MX6X-get-mac-address-from-eeprom.patch b/target/linux/bcm53xx/patches-5.10/035-v5.18-0002-ARM-dts-NSP-MX6X-get-mac-address-from-eeprom.patch new file mode 100644 index 000000000000..19cf1fe9523f --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/035-v5.18-0002-ARM-dts-NSP-MX6X-get-mac-address-from-eeprom.patch @@ -0,0 +1,40 @@ +From 66848aff05f669e95795b5f3a163f4762781333e Mon Sep 17 00:00:00 2001 +From: Matthew Hagan +Date: Wed, 23 Feb 2022 23:50:39 +0000 +Subject: [PATCH] ARM: dts: NSP: MX6X: get mac-address from eeprom + +The MAC address on the MX64/MX65 series is located on the AT24 EEPROM. +This is the same as other Meraki devices such as the MR32 [1]. + +[1] https://lore.kernel.org/linux-arm-kernel/fa8271d02ef74a687f365cebe5c55ec846963ab7.1631986106.git.chunkeey@gmail.com/ + +Signed-off-by: Matthew Hagan +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi ++++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi +@@ -39,6 +39,8 @@ + + &amac2 { + status = "okay"; ++ nvmem-cells = <&mac_address>; ++ nvmem-cell-names = "mac-address"; + }; + + &ehci0 { +@@ -53,6 +55,12 @@ + reg = <0x50>; + pagesize = <32>; + read-only; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ mac_address: mac-address@66 { ++ reg = <0x66 0x6>; ++ }; + }; + }; + diff --git a/target/linux/bcm53xx/patches-5.10/035-v5.18-0003-ARM-dts-NSP-MX6X-correct-LED-function-types.patch b/target/linux/bcm53xx/patches-5.10/035-v5.18-0003-ARM-dts-NSP-MX6X-correct-LED-function-types.patch new file mode 100644 index 000000000000..2da45ff9da63 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/035-v5.18-0003-ARM-dts-NSP-MX6X-correct-LED-function-types.patch @@ -0,0 +1,62 @@ +From 482c85c7fc95c572d368b2214b9e9d2c4a2e5789 Mon Sep 17 00:00:00 2001 +From: Matthew Hagan +Date: Wed, 23 Feb 2022 23:50:40 +0000 +Subject: [PATCH] ARM: dts: NSP: MX6X: correct LED function types + +Currently, the amber LED will remain always on. This is due to a +misinterpretation of the LED sub-node properties, where-by "default-state" +was used to indicate the initial state when powering on the device. When in +use, however, this resulted in the amber LED always being on. Instead change +this to only indicate a fault state. + +Assign LED_FUNCTION_POWER to the green PWM LED. + +These changes bring the MX64/65 in line with the MR32's devicetree. + +Signed-off-by: Matthew Hagan +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 3 +-- + arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi | 3 +-- + arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi | 2 +- + 3 files changed, 3 insertions(+), 5 deletions(-) + +--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi ++++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi +@@ -57,10 +57,9 @@ + + led-4 { + /* amber:power */ +- function = LED_FUNCTION_POWER; ++ function = LED_FUNCTION_FAULT; + color = ; + gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>; +- default-state = "on"; + }; + + led-5 { +--- a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi ++++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi +@@ -106,10 +106,9 @@ + + led-a { + /* amber:power */ +- function = LED_FUNCTION_POWER; ++ function = LED_FUNCTION_FAULT; + color = ; + gpios = <&gpioa 0 GPIO_ACTIVE_LOW>; +- default-state = "on"; + }; + + led-b { +--- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi ++++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi +@@ -22,7 +22,7 @@ + }; + + led-2 { +- function = LED_FUNCTION_INDICATOR; ++ function = LED_FUNCTION_POWER; + color = ; + pwms = <&pwm 2 50000>; + max-brightness = <255>; diff --git a/target/linux/bcm53xx/patches-5.10/035-v5.18-0004-ARM-dts-BCM5301X-Add-Ethernet-MAC-address-to-Luxul-X.patch b/target/linux/bcm53xx/patches-5.10/035-v5.18-0004-ARM-dts-BCM5301X-Add-Ethernet-MAC-address-to-Luxul-X.patch new file mode 100644 index 000000000000..c70fbc398bfa --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/035-v5.18-0004-ARM-dts-BCM5301X-Add-Ethernet-MAC-address-to-Luxul-X.patch @@ -0,0 +1,42 @@ +From c8442f0fb09ca3d842b9b23d1d0650f649fd10f8 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 28 Feb 2022 10:52:07 +0100 +Subject: [PATCH] ARM: dts: BCM5301X: Add Ethernet MAC address to Luxul + XWR-3150 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Luxul XWR-3150 stores MAC as NVRAM variable. Add NVMEM cell for it and +reference it in the Ethernet interface node. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +@@ -25,6 +25,9 @@ + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; ++ ++ et0macaddr: et0macaddr { ++ }; + }; + + leds { +@@ -72,6 +75,11 @@ + }; + }; + ++&gmac0 { ++ nvmem-cells = <&et0macaddr>; ++ nvmem-cell-names = "mac-address"; ++}; ++ + &usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; + }; -- 2.30.2