From a6ede8ac59c9d834ae0bb8a1a2bf682babc24b6e Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 6 Jan 2011 01:33:19 +0000 Subject: [PATCH] Drop support for older kernel versions SVN-Revision: 24915 --- target/linux/xburst/config-2.6.34 | 364 - target/linux/xburst/config-2.6.35 | 379 - target/linux/xburst/n516/config-2.6.34 | 16 - target/linux/xburst/n516/config-2.6.35 | 16 - target/linux/xburst/n526/config-2.6.34 | 4 - target/linux/xburst/n526/config-2.6.35 | 4 - .../xburst/patches-2.6.34/001-core.patch | 4412 -------- .../002-xburst-cache-quirks.patch | 339 - .../005-add-qi_lb60-board-support.patch | 594 - .../006-add-n516-board-support.patch | 702 -- .../007-add-n526-board-support.patch | 381 - .../xburst/patches-2.6.34/050-nand.patch | 547 - .../linux/xburst/patches-2.6.34/051-fb.patch | 941 -- .../linux/xburst/patches-2.6.34/052-rtc.patch | 397 - .../linux/xburst/patches-2.6.34/053-adc.patch | 498 - .../linux/xburst/patches-2.6.34/054-mmc.patch | 1087 -- .../xburst/patches-2.6.34/055-ohci.patch | 313 - .../linux/xburst/patches-2.6.34/056-udc.patch | 2636 ----- .../xburst/patches-2.6.34/060-jzcodec.patch | 602 - .../xburst/patches-2.6.34/061-asoc.patch | 1062 -- .../patches-2.6.34/065-qi_lb60-sound.patch | 231 - .../patches-2.6.34/066-n516-sound.patch | 352 - .../patches-2.6.34/067-n526-sound.patch | 219 - .../xburst/patches-2.6.34/100-battery.patch | 441 - .../linux/xburst/patches-2.6.34/101-lcm.patch | 304 - .../xburst/patches-2.6.34/103-serial.patch | 178 - .../patches-2.6.34/106-gpio-charger.patch | 266 - .../patches-2.6.34/400-spi-gpio-3wire.patch | 189 - .../420-fb-notifier-pre-post.patch | 42 - .../xburst/patches-2.6.34/440-metronome.patch | 1219 --- .../patches-2.6.34/500-modifier-keys.patch | 611 -- .../xburst/patches-2.6.34/800-n516-lpc.patch | 520 - .../xburst/patches-2.6.34/801-n526-lpc.patch | 287 - .../patches-2.6.34/900-add-openwrt-logo.patch | 9744 ----------------- .../xburst/patches-2.6.35/001-core.patch | 242 - .../002-xburst-cache-quirks.patch | 334 - .../xburst/patches-2.6.35/003-clock_api.patch | 1173 -- .../linux/xburst/patches-2.6.35/004-irq.patch | 275 - .../xburst/patches-2.6.35/005-timer.patch | 238 - .../patches-2.6.35/006-clocksource.patch | 165 - .../patches-2.6.35/007-power-management.patch | 171 - .../xburst/patches-2.6.35/008-setup.patch | 49 - .../xburst/patches-2.6.35/009-gpio.patch | 1027 -- .../linux/xburst/patches-2.6.35/010-dma.patch | 404 - .../linux/xburst/patches-2.6.35/011-pwm.patch | 197 - .../xburst/patches-2.6.35/012-serial.patch | 82 - .../xburst/patches-2.6.35/013-prom.patch | 89 - .../patches-2.6.35/014-platform-devices.patch | 352 - .../xburst/patches-2.6.35/015-kbuild.patch | 94 - .../020-add-qi_lb60-board-support.patch | 551 - .../021-add-n516-board-support.patch | 684 -- .../022-add-n526-board-support.patch | 365 - .../xburst/patches-2.6.35/050-nand.patch | 601 - .../linux/xburst/patches-2.6.35/051-fb.patch | 971 -- .../linux/xburst/patches-2.6.35/052-rtc.patch | 400 - .../linux/xburst/patches-2.6.35/053-adc.patch | 476 - .../linux/xburst/patches-2.6.35/054-mmc.patch | 1098 -- .../xburst/patches-2.6.35/055-ohci.patch | 326 - .../linux/xburst/patches-2.6.35/056-udc.patch | 2621 ----- .../xburst/patches-2.6.35/057-hwmon.patch | 283 - .../xburst/patches-2.6.35/058-battery.patch | 522 - .../xburst/patches-2.6.35/060-jzcodec.patch | 594 - .../xburst/patches-2.6.35/061-asoc.patch | 1038 -- .../patches-2.6.35/065-qi_lb60-sound.patch | 211 - .../patches-2.6.35/066-n516-sound.patch | 327 - .../patches-2.6.35/067-n526-sound.patch | 195 - .../linux/xburst/patches-2.6.35/101-lcm.patch | 295 - .../patches-2.6.35/106-gpio-charger.patch | 267 - .../patches-2.6.35/107-pwm-beeper.patch | 249 - .../patches-2.6.35/400-spi-gpio-3wire.patch | 180 - .../420-fb-notifier-pre-post.patch | 37 - .../xburst/patches-2.6.35/440-metronome.patch | 1213 -- .../patches-2.6.35/500-modifier-keys.patch | 604 - .../xburst/patches-2.6.35/800-n516-lpc.patch | 510 - .../xburst/patches-2.6.35/801-n526-lpc.patch | 277 - .../patches-2.6.35/900-add-openwrt-logo.patch | 9730 ---------------- target/linux/xburst/qi_lb60/config-2.6.34 | 16 - target/linux/xburst/qi_lb60/config-2.6.35 | 17 - 78 files changed, 59447 deletions(-) delete mode 100644 target/linux/xburst/config-2.6.34 delete mode 100644 target/linux/xburst/config-2.6.35 delete mode 100644 target/linux/xburst/n516/config-2.6.34 delete mode 100644 target/linux/xburst/n516/config-2.6.35 delete mode 100644 target/linux/xburst/n526/config-2.6.34 delete mode 100644 target/linux/xburst/n526/config-2.6.35 delete mode 100644 target/linux/xburst/patches-2.6.34/001-core.patch delete mode 100644 target/linux/xburst/patches-2.6.34/002-xburst-cache-quirks.patch delete mode 100644 target/linux/xburst/patches-2.6.34/005-add-qi_lb60-board-support.patch delete mode 100644 target/linux/xburst/patches-2.6.34/006-add-n516-board-support.patch delete mode 100644 target/linux/xburst/patches-2.6.34/007-add-n526-board-support.patch delete mode 100644 target/linux/xburst/patches-2.6.34/050-nand.patch delete mode 100644 target/linux/xburst/patches-2.6.34/051-fb.patch delete mode 100644 target/linux/xburst/patches-2.6.34/052-rtc.patch delete mode 100644 target/linux/xburst/patches-2.6.34/053-adc.patch delete mode 100644 target/linux/xburst/patches-2.6.34/054-mmc.patch delete mode 100644 target/linux/xburst/patches-2.6.34/055-ohci.patch delete mode 100644 target/linux/xburst/patches-2.6.34/056-udc.patch delete mode 100644 target/linux/xburst/patches-2.6.34/060-jzcodec.patch delete mode 100644 target/linux/xburst/patches-2.6.34/061-asoc.patch delete mode 100644 target/linux/xburst/patches-2.6.34/065-qi_lb60-sound.patch delete mode 100644 target/linux/xburst/patches-2.6.34/066-n516-sound.patch delete mode 100644 target/linux/xburst/patches-2.6.34/067-n526-sound.patch delete mode 100644 target/linux/xburst/patches-2.6.34/100-battery.patch delete mode 100644 target/linux/xburst/patches-2.6.34/101-lcm.patch delete mode 100644 target/linux/xburst/patches-2.6.34/103-serial.patch delete mode 100644 target/linux/xburst/patches-2.6.34/106-gpio-charger.patch delete mode 100644 target/linux/xburst/patches-2.6.34/400-spi-gpio-3wire.patch delete mode 100644 target/linux/xburst/patches-2.6.34/420-fb-notifier-pre-post.patch delete mode 100644 target/linux/xburst/patches-2.6.34/440-metronome.patch delete mode 100644 target/linux/xburst/patches-2.6.34/500-modifier-keys.patch delete mode 100644 target/linux/xburst/patches-2.6.34/800-n516-lpc.patch delete mode 100644 target/linux/xburst/patches-2.6.34/801-n526-lpc.patch delete mode 100644 target/linux/xburst/patches-2.6.34/900-add-openwrt-logo.patch delete mode 100644 target/linux/xburst/patches-2.6.35/001-core.patch delete mode 100644 target/linux/xburst/patches-2.6.35/002-xburst-cache-quirks.patch delete mode 100644 target/linux/xburst/patches-2.6.35/003-clock_api.patch delete mode 100644 target/linux/xburst/patches-2.6.35/004-irq.patch delete mode 100644 target/linux/xburst/patches-2.6.35/005-timer.patch delete mode 100644 target/linux/xburst/patches-2.6.35/006-clocksource.patch delete mode 100644 target/linux/xburst/patches-2.6.35/007-power-management.patch delete mode 100644 target/linux/xburst/patches-2.6.35/008-setup.patch delete mode 100644 target/linux/xburst/patches-2.6.35/009-gpio.patch delete mode 100644 target/linux/xburst/patches-2.6.35/010-dma.patch delete mode 100644 target/linux/xburst/patches-2.6.35/011-pwm.patch delete mode 100644 target/linux/xburst/patches-2.6.35/012-serial.patch delete mode 100644 target/linux/xburst/patches-2.6.35/013-prom.patch delete mode 100644 target/linux/xburst/patches-2.6.35/014-platform-devices.patch delete mode 100644 target/linux/xburst/patches-2.6.35/015-kbuild.patch delete mode 100644 target/linux/xburst/patches-2.6.35/020-add-qi_lb60-board-support.patch delete mode 100644 target/linux/xburst/patches-2.6.35/021-add-n516-board-support.patch delete mode 100644 target/linux/xburst/patches-2.6.35/022-add-n526-board-support.patch delete mode 100644 target/linux/xburst/patches-2.6.35/050-nand.patch delete mode 100644 target/linux/xburst/patches-2.6.35/051-fb.patch delete mode 100644 target/linux/xburst/patches-2.6.35/052-rtc.patch delete mode 100644 target/linux/xburst/patches-2.6.35/053-adc.patch delete mode 100644 target/linux/xburst/patches-2.6.35/054-mmc.patch delete mode 100644 target/linux/xburst/patches-2.6.35/055-ohci.patch delete mode 100644 target/linux/xburst/patches-2.6.35/056-udc.patch delete mode 100644 target/linux/xburst/patches-2.6.35/057-hwmon.patch delete mode 100644 target/linux/xburst/patches-2.6.35/058-battery.patch delete mode 100644 target/linux/xburst/patches-2.6.35/060-jzcodec.patch delete mode 100644 target/linux/xburst/patches-2.6.35/061-asoc.patch delete mode 100644 target/linux/xburst/patches-2.6.35/065-qi_lb60-sound.patch delete mode 100644 target/linux/xburst/patches-2.6.35/066-n516-sound.patch delete mode 100644 target/linux/xburst/patches-2.6.35/067-n526-sound.patch delete mode 100644 target/linux/xburst/patches-2.6.35/101-lcm.patch delete mode 100644 target/linux/xburst/patches-2.6.35/106-gpio-charger.patch delete mode 100644 target/linux/xburst/patches-2.6.35/107-pwm-beeper.patch delete mode 100644 target/linux/xburst/patches-2.6.35/400-spi-gpio-3wire.patch delete mode 100644 target/linux/xburst/patches-2.6.35/420-fb-notifier-pre-post.patch delete mode 100644 target/linux/xburst/patches-2.6.35/440-metronome.patch delete mode 100644 target/linux/xburst/patches-2.6.35/500-modifier-keys.patch delete mode 100644 target/linux/xburst/patches-2.6.35/800-n516-lpc.patch delete mode 100644 target/linux/xburst/patches-2.6.35/801-n526-lpc.patch delete mode 100644 target/linux/xburst/patches-2.6.35/900-add-openwrt-logo.patch delete mode 100644 target/linux/xburst/qi_lb60/config-2.6.34 delete mode 100644 target/linux/xburst/qi_lb60/config-2.6.35 diff --git a/target/linux/xburst/config-2.6.34 b/target/linux/xburst/config-2.6.34 deleted file mode 100644 index 95aa8ccc7c4..00000000000 --- a/target/linux/xburst/config-2.6.34 +++ /dev/null @@ -1,364 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_ALCHEMY_GPIO_INDIRECT is not set -# CONFIG_AR7 is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_ARPD is not set -# CONFIG_BACKLIGHT_CLASS_DEVICE is not set -# CONFIG_BACKLIGHT_GENERIC is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -# CONFIG_BATTERY_JZ4740 is not set -# CONFIG_BCM47XX is not set -# CONFIG_BCM63XX is not set -CONFIG_BITREVERSE=y -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_BRIDGE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set -# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set -CONFIG_CHARGER_GPIO=y -CONFIG_CONSOLE_TRANSLATIONS=y -# CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_CPU_CAVIUM_OCTEON is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_CPU_LOONGSON2E is not set -# CONFIG_CPU_LOONGSON2F is not set -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R5500 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CRC16=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_LZO=y -CONFIG_DEFAULT_AS=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DUMMY_CONSOLE=y -CONFIG_EARLY_PRINTK=y -CONFIG_ELF_CORE=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_EXT4_FS=y -CONFIG_FAT_FS=y -# CONFIG_FB_JZ4740 is not set -CONFIG_FB_SYS_COPYAREA=y -CONFIG_FB_SYS_FILLRECT=y -CONFIG_FB_SYS_IMAGEBLIT=y -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FONT_10x18 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_SUN12x22 is not set -CONFIG_FONT_SUN8x16=y -CONFIG_FONTS=y -CONFIG_FORCE_MAX_ZONEORDER=12 -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FRAMEBUFFER_CONSOLE is not set -CONFIG_FREEZER=y -CONFIG_INOTIFY_USER=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_GPIOLIB=y -# CONFIG_HAMRADIO is not set -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PWM=y -# CONFIG_HIBERNATION is not set -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_HW_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_GPIO_BUTTONS is not set -CONFIG_INPUT_KEYBOARD=y -CONFIG_INPUT=y -CONFIG_IRQ_CPU=y -CONFIG_JBD=y -# CONFIG_JZ4740_ADC is not set -# CONFIG_JZ4740_N516 is not set -# CONFIG_JZ4740_N526 is not set -# CONFIG_JZ4740_QI_LB60 is not set -CONFIG_JZRISC=y -CONFIG_JZSOC=y -CONFIG_KALLSYMS=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_GPIO is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_MATRIX is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_LCD_CLASS_DEVICE is not set -# CONFIG_LCD_GPM940B0 is not set -# CONFIG_LCD_ILI9320 is not set -# CONFIG_LCD_L4F00242T03 is not set -# CONFIG_LCD_LMS283GF05 is not set -# CONFIG_LCD_LTV350QV is not set -# CONFIG_LCD_PLATFORM is not set -# CONFIG_LCD_TDO24M is not set -# CONFIG_LCD_VGG2432A4 is not set -# CONFIG_LEDS_PWM is not set -CONFIG_LEGACY_PTY_COUNT=2 -CONFIG_LEGACY_PTYS=y -CONFIG_LOCK_KERNEL=y -# CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_OPENWRT_CLUT224 is not set -# CONFIG_LOGO is not set -CONFIG_LOONGSON_UART_BASE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -CONFIG_MACH_JZ=y -# CONFIG_MACH_LOONGSON is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_MIKROTIK_RB532 is not set -# CONFIG_MINI_FO is not set -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MIPS=y -# CONFIG_MMC_AT91 is not set -# CONFIG_MMC_ATMELMCI is not set -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_BLOCK=y -CONFIG_MMC_JZ=y -CONFIG_MMC_UNSAFE_RESUME=y -CONFIG_MMC=y -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_NAND_JZ4740=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_UBI_BEB_RESERVE=1 -# CONFIG_MTD_UBI_DEBUG is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI=y -# CONFIG_N516_LPC is not set -CONFIG_NEED_DMA_MAP_STATE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NET_ETHERNET is not set -# CONFIG_NET_SCHED is not set -# CONFIG_NETWORK_FILESYSTEMS is not set -# CONFIG_NEW_LEDS is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_CODEPAGE_1251=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=y -CONFIG_NLS_CODEPAGE_775=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_CODEPAGE_852=y -CONFIG_NLS_CODEPAGE_855=y -CONFIG_NLS_CODEPAGE_857=y -CONFIG_NLS_CODEPAGE_860=y -CONFIG_NLS_CODEPAGE_861=y -CONFIG_NLS_CODEPAGE_862=y -CONFIG_NLS_CODEPAGE_863=y -CONFIG_NLS_CODEPAGE_864=y -CONFIG_NLS_CODEPAGE_865=y -CONFIG_NLS_CODEPAGE_866=y -CONFIG_NLS_CODEPAGE_869=y -CONFIG_NLS_CODEPAGE_874=y -CONFIG_NLS_CODEPAGE_932=y -CONFIG_NLS_CODEPAGE_936=y -CONFIG_NLS_CODEPAGE_949=y -CONFIG_NLS_CODEPAGE_950=y -CONFIG_NLS_ISO8859_13=y -CONFIG_NLS_ISO8859_14=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_NLS_ISO8859_3=y -CONFIG_NLS_ISO8859_4=y -CONFIG_NLS_ISO8859_5=y -CONFIG_NLS_ISO8859_6=y -CONFIG_NLS_ISO8859_7=y -CONFIG_NLS_ISO8859_8=y -CONFIG_NLS_ISO8859_9=y -CONFIG_NLS_KOI8_R=y -CONFIG_NLS_KOI8_U=y -CONFIG_NLS_UTF8=y -CONFIG_NLS=y -# CONFIG_NO_IOPORT is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set -# CONFIG_PACKET_MMAP is not set -CONFIG_PAGEFLAGS_EXTENDED=y -# CONFIG_PCI is not set -# CONFIG_PDA_POWER is not set -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PM_DEBUG is not set -CONFIG_PM_OPS=y -# CONFIG_PM_RUNTIME is not set -CONFIG_PM_SLEEP=y -CONFIG_PM=y -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_POWERTV is not set -# CONFIG_POWER_SUPPLY_DEBUG is not set -CONFIG_POWER_SUPPLY=y -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT=y -CONFIG_PRINTK_TIME=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_CMOS is not set -CONFIG_RTC_DRV_JZ4740=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_SCSI_MOD=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SDIO_UART is not set -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SND_SOC_ALL_CODECS is not set -# CONFIG_SND_SOC_JZCODEC is not set -# CONFIG_SND_SOC_JZ4740 is not set -# CONFIG_SND_JZ4740_SOC_N516 is not set -# CONFIG_SND_JZ4740_SOC_N526 is not set -# CONFIG_SND_JZ4740_SOC_QI_LB60 is not set -CONFIG_SOC_JZ4740=y -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SQUASHFS is not set -# CONFIG_STAGING is not set -CONFIG_SUSPEND_FREEZER=y -CONFIG_SUSPEND=y -# CONFIG_SYN_COOKIES is not set -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_TRAD_SIGNALS=y -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -# CONFIG_UBIFS_FS_DEBUG is not set -CONFIG_UBIFS_FS_LZO=y -# CONFIG_UBIFS_FS_XATTR is not set -CONFIG_UBIFS_FS=y -CONFIG_UBIFS_FS_ZLIB=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_CDC_COMPOSITE is not set -# CONFIG_USB_ETH_EEM is not set -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_ETH=y -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_CI13XXX is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DEBUG_FS is not set -CONFIG_USB_GADGET_DUALSPEED=y -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_GADGET_FSL_QE is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_IMX is not set -CONFIG_USB_GADGET_JZ4740=y -# CONFIG_USB_GADGET_LANGWELL is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_R8A66597 is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_S3C_HSOTG is not set -CONFIG_USB_GADGET_SELECTED=y -CONFIG_USB_GADGET_VBUS_DRAW=2 -CONFIG_USB_GADGET=y -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_G_SERIAL is not set -CONFIG_USB_JZ4740=y -# CONFIG_USB_MIDI_GADGET is not set -CONFIG_USB_SUPPORT=y -# CONFIG_USB_ZERO is not set -CONFIG_VFAT_FS=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_VLAN_8021Q is not set -CONFIG_VT_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_VT=y -# CONFIG_WATCHDOG is not set -# CONFIG_WLAN_80211 is not set -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/xburst/config-2.6.35 b/target/linux/xburst/config-2.6.35 deleted file mode 100644 index ea088ac5f6d..00000000000 --- a/target/linux/xburst/config-2.6.35 +++ /dev/null @@ -1,379 +0,0 @@ - -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_ALCHEMY_GPIO_INDIRECT is not set -# CONFIG_AR7 is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_ARPD is not set -# CONFIG_BACKLIGHT_CLASS_DEVICE is not set -# CONFIG_BACKLIGHT_GENERIC is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -# CONFIG_BATTERY_JZ4740 is not set -# CONFIG_BCM47XX is not set -# CONFIG_BCM63XX is not set -CONFIG_BITREVERSE=y -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_BRIDGE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set -# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set -CONFIG_CHARGER_GPIO=y -CONFIG_CONSOLE_TRANSLATIONS=y -# CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_CPU_CAVIUM_OCTEON is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_CPU_LOONGSON2E is not set -# CONFIG_CPU_LOONGSON2F is not set -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R5500 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CRC16=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_LZO=y -CONFIG_DEFAULT_AS=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DUMMY_CONSOLE=y -CONFIG_EARLY_PRINTK=y -CONFIG_ELF_CORE=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_EXT4_FS=y -CONFIG_FAT_FS=y -# CONFIG_FB_JZ4740 is not set -CONFIG_FB_SYS_COPYAREA=y -CONFIG_FB_SYS_FILLRECT=y -CONFIG_FB_SYS_IMAGEBLIT=y -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -CONFIG_FONTS=y -# CONFIG_FONT_10x18 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_SUN12x22 is not set -CONFIG_FONT_SUN8x16=y -CONFIG_FORCE_MAX_ZONEORDER=12 -# CONFIG_FRAMEBUFFER_CONSOLE is not set -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FREEZER=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_GPIOLIB=y -# CONFIG_HAMRADIO is not set -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PWM=y -# CONFIG_HIBERNATION is not set -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_HW_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_INLINE_READ_UNLOCK is not set -# CONFIG_INLINE_READ_UNLOCK_IRQ is not set -# CONFIG_INLINE_SPIN_UNLOCK is not set -# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set -# CONFIG_INLINE_WRITE_UNLOCK is not set -# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set -CONFIG_INOTIFY_USER=y -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_GPIO_BUTTONS is not set -CONFIG_INPUT_KEYBOARD=y -# CONFIG_INPUT_PWM_BEEPER is not set -CONFIG_INPUT=y -CONFIG_IRQ_CPU=y -CONFIG_JBD=y -# CONFIG_JZ4740_ADC is not set -# CONFIG_JZ4740_N516 is not set -# CONFIG_JZ4740_N526 is not set -# CONFIG_JZ4740_QI_LB60 is not set -CONFIG_KALLSYMS=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_GPIO is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_MATRIX is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_LCD_CLASS_DEVICE is not set -# CONFIG_LCD_GPM940B0 is not set -# CONFIG_LCD_ILI9320 is not set -# CONFIG_LCD_L4F00242T03 is not set -# CONFIG_LCD_LMS283GF05 is not set -# CONFIG_LCD_LTV350QV is not set -# CONFIG_LCD_PLATFORM is not set -# CONFIG_LCD_TDO24M is not set -# CONFIG_LCD_VGG2432A4 is not set -# CONFIG_LEDS_PWM is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=2 -CONFIG_LOCK_KERNEL=y -# CONFIG_LOGO is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_OPENWRT_CLUT224 is not set -# CONFIG_LOONGSON_MC146818 is not set -CONFIG_LOONGSON_UART_BASE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -CONFIG_MACH_JZ4740=y -# CONFIG_MACH_LOONGSON is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_MFD_JZ4740_ADC is not set -# CONFIG_MIKROTIK_RB532 is not set -# CONFIG_MINI_FO is not set -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MIPS=y -# CONFIG_MMC_AT91 is not set -# CONFIG_MMC_ATMELMCI is not set -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_BLOCK=y -CONFIG_MMC_JZ4740=y -CONFIG_MMC_UNSAFE_RESUME=y -CONFIG_MMC=y -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_NAND_JZ4740=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -# CONFIG_MTD_SM_COMMON is not set -CONFIG_MTD_UBI_BEB_RESERVE=1 -# CONFIG_MTD_UBI_DEBUG is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI=y -# CONFIG_N516_LPC is not set -CONFIG_NEED_DMA_MAP_STATE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETWORK_FILESYSTEMS is not set -# CONFIG_NET_ETHERNET is not set -# CONFIG_NET_SCHED is not set -# CONFIG_NEW_LEDS is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_CODEPAGE_1251=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=y -CONFIG_NLS_CODEPAGE_775=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_CODEPAGE_852=y -CONFIG_NLS_CODEPAGE_855=y -CONFIG_NLS_CODEPAGE_857=y -CONFIG_NLS_CODEPAGE_860=y -CONFIG_NLS_CODEPAGE_861=y -CONFIG_NLS_CODEPAGE_862=y -CONFIG_NLS_CODEPAGE_863=y -CONFIG_NLS_CODEPAGE_864=y -CONFIG_NLS_CODEPAGE_865=y -CONFIG_NLS_CODEPAGE_866=y -CONFIG_NLS_CODEPAGE_869=y -CONFIG_NLS_CODEPAGE_874=y -CONFIG_NLS_CODEPAGE_932=y -CONFIG_NLS_CODEPAGE_936=y -CONFIG_NLS_CODEPAGE_949=y -CONFIG_NLS_CODEPAGE_950=y -CONFIG_NLS_ISO8859_13=y -CONFIG_NLS_ISO8859_14=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_NLS_ISO8859_3=y -CONFIG_NLS_ISO8859_4=y -CONFIG_NLS_ISO8859_5=y -CONFIG_NLS_ISO8859_6=y -CONFIG_NLS_ISO8859_7=y -CONFIG_NLS_ISO8859_8=y -CONFIG_NLS_ISO8859_9=y -CONFIG_NLS_KOI8_R=y -CONFIG_NLS_KOI8_U=y -CONFIG_NLS_UTF8=y -CONFIG_NLS=y -# CONFIG_NO_IOPORT is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set -# CONFIG_PACKET_MMAP is not set -CONFIG_PAGEFLAGS_EXTENDED=y -# CONFIG_PCI is not set -# CONFIG_PDA_POWER is not set -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PM_DEBUG is not set -CONFIG_PM_OPS=y -# CONFIG_PM_RUNTIME is not set -CONFIG_PM_SLEEP=y -CONFIG_PM=y -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_POWERTV is not set -# CONFIG_POWER_SUPPLY_DEBUG is not set -CONFIG_POWER_SUPPLY=y -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT=y -CONFIG_PRINTK_TIME=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_CMOS is not set -CONFIG_RTC_DRV_JZ4740=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_DMA is not set -CONFIG_SCSI_MOD=y -# CONFIG_SDIO_UART is not set -# CONFIG_SENSORS_JZ4740 is not set -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SND_JZ4740_SOC_N516 is not set -# CONFIG_SND_JZ4740_SOC_N526 is not set -# CONFIG_SND_JZ4740_SOC_QI_LB60 is not set -# CONFIG_SND_SOC_ALL_CODECS is not set -# CONFIG_SND_SOC_JZ4740 is not set -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SQUASHFS is not set -# CONFIG_STAGING is not set -CONFIG_SUSPEND_FREEZER=y -CONFIG_SUSPEND_NVS=y -CONFIG_SUSPEND=y -# CONFIG_SYN_COOKIES is not set -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -# CONFIG_TEST_POWER is not set -CONFIG_TRAD_SIGNALS=y -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -# CONFIG_UBIFS_FS_DEBUG is not set -CONFIG_UBIFS_FS_LZO=y -# CONFIG_UBIFS_FS_XATTR is not set -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UBIFS_FS=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_CDC_COMPOSITE is not set -# CONFIG_USB_ETH_EEM is not set -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_ETH=y -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_FUNCTIONFS is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_CI13XXX is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DEBUG_FS is not set -CONFIG_USB_GADGET_DUALSPEED=y -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_FSL_QE is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_IMX is not set -CONFIG_USB_GADGET_JZ4740=y -# CONFIG_USB_GADGET_LANGWELL is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_R8A66597 is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_S3C_HSOTG is not set -CONFIG_USB_GADGET_SELECTED=y -CONFIG_USB_GADGET_VBUS_DRAW=2 -CONFIG_USB_GADGET=y -# CONFIG_USB_G_HID is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_G_WEBCAM is not set -CONFIG_USB_JZ4740=y -# CONFIG_USB_MIDI_GADGET is not set -CONFIG_USB_SUPPORT=y -# CONFIG_USB_ZERO is not set -CONFIG_VFAT_FS=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_VLAN_8021Q is not set -CONFIG_VT_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_VT=y -# CONFIG_WATCHDOG is not set -# CONFIG_WLAN_80211 is not set -CONFIG_ZONE_DMA_FLAG=0 - diff --git a/target/linux/xburst/n516/config-2.6.34 b/target/linux/xburst/n516/config-2.6.34 deleted file mode 100644 index 1a7251d2e35..00000000000 --- a/target/linux/xburst/n516/config-2.6.34 +++ /dev/null @@ -1,16 +0,0 @@ -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_JZ4740=y -CONFIG_FB_METRONOME=m -CONFIG_FB_SYS_FOPS=m -CONFIG_HWMON=y -# CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_I2C=y -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_GPIO=y -CONFIG_JZ4740_N516=y -CONFIG_LEDS_GPIO=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_N516_LPC=y -CONFIG_NEW_LEDS=y -CONFIG_SENSORS_LM75=y diff --git a/target/linux/xburst/n516/config-2.6.35 b/target/linux/xburst/n516/config-2.6.35 deleted file mode 100644 index 1a7251d2e35..00000000000 --- a/target/linux/xburst/n516/config-2.6.35 +++ /dev/null @@ -1,16 +0,0 @@ -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_JZ4740=y -CONFIG_FB_METRONOME=m -CONFIG_FB_SYS_FOPS=m -CONFIG_HWMON=y -# CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_I2C=y -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_GPIO=y -CONFIG_JZ4740_N516=y -CONFIG_LEDS_GPIO=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_N516_LPC=y -CONFIG_NEW_LEDS=y -CONFIG_SENSORS_LM75=y diff --git a/target/linux/xburst/n526/config-2.6.34 b/target/linux/xburst/n526/config-2.6.34 deleted file mode 100644 index 916ee8dc8d0..00000000000 --- a/target/linux/xburst/n526/config-2.6.34 +++ /dev/null @@ -1,4 +0,0 @@ -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -CONFIG_JZ4740_N516=y diff --git a/target/linux/xburst/n526/config-2.6.35 b/target/linux/xburst/n526/config-2.6.35 deleted file mode 100644 index 916ee8dc8d0..00000000000 --- a/target/linux/xburst/n526/config-2.6.35 +++ /dev/null @@ -1,4 +0,0 @@ -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -CONFIG_JZ4740_N516=y diff --git a/target/linux/xburst/patches-2.6.34/001-core.patch b/target/linux/xburst/patches-2.6.34/001-core.patch deleted file mode 100644 index ea77457434d..00000000000 --- a/target/linux/xburst/patches-2.6.34/001-core.patch +++ /dev/null @@ -1,4412 +0,0 @@ -From e1828438bbdd0623cf7f9c6672f2fe65b1349aa6 Mon Sep 17 00:00:00 2001 -From: Lars-Peter Clausen -Date: Sat, 24 Apr 2010 17:35:05 +0200 -Subject: [PATCH] Add JZ4740 SoC core support - ---- - arch/mips/Kconfig | 4 + - arch/mips/Makefile | 6 + - arch/mips/include/asm/bootinfo.h | 6 + - arch/mips/include/asm/cpu.h | 13 +- - arch/mips/include/asm/mach-jz4740/base.h | 28 + - arch/mips/include/asm/mach-jz4740/clock.h | 28 + - arch/mips/include/asm/mach-jz4740/dma.h | 90 +++ - arch/mips/include/asm/mach-jz4740/gpio.h | 398 +++++++++++ - arch/mips/include/asm/mach-jz4740/irq.h | 55 ++ - arch/mips/include/asm/mach-jz4740/platform.h | 34 + - arch/mips/include/asm/mach-jz4740/serial.h | 30 + - arch/mips/include/asm/mach-jz4740/timer.h | 22 + - arch/mips/include/asm/mach-jz4740/war.h | 25 + - arch/mips/jz4740/Kconfig | 29 + - arch/mips/jz4740/Makefile | 18 + - arch/mips/jz4740/clock-debugfs.c | 109 +++ - arch/mips/jz4740/clock.c | 935 ++++++++++++++++++++++++++ - arch/mips/jz4740/clock.h | 75 ++ - arch/mips/jz4740/dma.c | 336 +++++++++ - arch/mips/jz4740/gpio.c | 598 ++++++++++++++++ - arch/mips/jz4740/irq.c | 170 +++++ - arch/mips/jz4740/irq.h | 21 + - arch/mips/jz4740/platform.c | 246 +++++++ - arch/mips/jz4740/pm.c | 59 ++ - arch/mips/jz4740/prom.c | 69 ++ - arch/mips/jz4740/pwm.c | 167 +++++ - arch/mips/jz4740/reset.c | 81 +++ - arch/mips/jz4740/reset.h | 7 + - arch/mips/jz4740/setup.c | 64 ++ - arch/mips/jz4740/time.c | 144 ++++ - arch/mips/jz4740/timer.c | 48 ++ - arch/mips/jz4740/timer.h | 130 ++++ - arch/mips/kernel/cpu-probe.c | 20 + - arch/mips/mm/tlbex.c | 5 + - 34 files changed, 4069 insertions(+), 1 deletions(-) - create mode 100644 arch/mips/include/asm/mach-jz4740/base.h - create mode 100644 arch/mips/include/asm/mach-jz4740/clock.h - create mode 100644 arch/mips/include/asm/mach-jz4740/dma.h - create mode 100644 arch/mips/include/asm/mach-jz4740/gpio.h - create mode 100644 arch/mips/include/asm/mach-jz4740/irq.h - create mode 100644 arch/mips/include/asm/mach-jz4740/platform.h - create mode 100644 arch/mips/include/asm/mach-jz4740/serial.h - create mode 100644 arch/mips/include/asm/mach-jz4740/timer.h - create mode 100644 arch/mips/include/asm/mach-jz4740/war.h - create mode 100644 arch/mips/jz4740/Kconfig - create mode 100644 arch/mips/jz4740/Makefile - create mode 100644 arch/mips/jz4740/clock-debugfs.c - create mode 100644 arch/mips/jz4740/clock.c - create mode 100644 arch/mips/jz4740/clock.h - create mode 100644 arch/mips/jz4740/dma.c - create mode 100644 arch/mips/jz4740/gpio.c - create mode 100644 arch/mips/jz4740/irq.c - create mode 100644 arch/mips/jz4740/irq.h - create mode 100644 arch/mips/jz4740/platform.c - create mode 100644 arch/mips/jz4740/pm.c - create mode 100644 arch/mips/jz4740/prom.c - create mode 100644 arch/mips/jz4740/pwm.c - create mode 100644 arch/mips/jz4740/reset.c - create mode 100644 arch/mips/jz4740/reset.h - create mode 100644 arch/mips/jz4740/setup.c - create mode 100644 arch/mips/jz4740/time.c - create mode 100644 arch/mips/jz4740/timer.c - create mode 100644 arch/mips/jz4740/timer.h - -diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig -index 7e6fd1c..e902f02 100644 ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -162,6 +162,9 @@ config MACH_JAZZ - Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and - Olivetti M700-10 workstations. - -+config MACH_JZ -+ bool "Ingenic JZ4720/JZ4740 based machines" -+ - config LASAT - bool "LASAT Networks platforms" - select CEVT_R4K -@@ -686,6 +689,7 @@ endchoice - source "arch/mips/alchemy/Kconfig" - source "arch/mips/bcm63xx/Kconfig" - source "arch/mips/jazz/Kconfig" -+source "arch/mips/jz4740/Kconfig" - source "arch/mips/lasat/Kconfig" - source "arch/mips/pmc-sierra/Kconfig" - source "arch/mips/powertv/Kconfig" -diff --git a/arch/mips/Makefile b/arch/mips/Makefile -index 0b9c01a..007a82e 100644 ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -659,6 +659,12 @@ else - load-$(CONFIG_CPU_CAVIUM_OCTEON) += 0xffffffff81100000 - endif - -+# Ingenic JZ4740 -+# -+core-$(CONFIG_SOC_JZ4740) += arch/mips/jz4740/ -+cflags-$(CONFIG_SOC_JZ4740) += -I$(srctree)/arch/mips/include/asm/mach-jz4740 -+load-$(CONFIG_SOC_JZ4740) += 0xffffffff80010000 -+ - cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic - drivers-$(CONFIG_PCI) += arch/mips/pci/ - -diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h -index 09eee09..15a8ef0 100644 ---- a/arch/mips/include/asm/bootinfo.h -+++ b/arch/mips/include/asm/bootinfo.h -@@ -71,6 +71,12 @@ - #define MACH_LEMOTE_LL2F 7 - #define MACH_LOONGSON_END 8 - -+/* -+ * Valid machtype for group INGENIC -+ */ -+#define MACH_INGENIC_JZ4730 0 /* JZ4730 SOC */ -+#define MACH_INGENIC_JZ4740 1 /* JZ4740 SOC */ -+ - extern char *system_type; - const char *get_system_type(void); - -diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h -index a5acda4..e67aebb 100644 ---- a/arch/mips/include/asm/cpu.h -+++ b/arch/mips/include/asm/cpu.h -@@ -34,7 +34,7 @@ - #define PRID_COMP_LSI 0x080000 - #define PRID_COMP_LEXRA 0x0b0000 - #define PRID_COMP_CAVIUM 0x0d0000 -- -+#define PRID_COMP_INGENIC 0xd00000 - - /* - * Assigned values for the product ID register. In order to detect a -@@ -133,6 +133,12 @@ - #define PRID_IMP_CAVIUM_CN52XX 0x0700 - - /* -+ * These are the PRID's for when 23:16 == PRID_COMP_INGENIC -+ */ -+ -+#define PRID_IMP_JZRISC 0x0200 -+ -+/* - * Definitions for 7:0 on legacy processors - */ - -@@ -226,6 +232,11 @@ enum cpu_type_enum { - CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2, - CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, - -+ /* -+ * Ingenic class processors -+ */ -+ CPU_JZRISC, CPU_XBURST, -+ - CPU_LAST - }; - -diff --git a/arch/mips/include/asm/mach-jz4740/base.h b/arch/mips/include/asm/mach-jz4740/base.h -new file mode 100644 -index 0000000..a281972 ---- /dev/null -+++ b/arch/mips/include/asm/mach-jz4740/base.h -@@ -0,0 +1,28 @@ -+#ifndef __JZ4740_BASE_ADDR_H__ -+#define __JZ4740_BASE_ADDR_H__ -+ -+#define JZ4740_CPM_BASE_ADDR 0xb0000000 -+#define JZ4740_INTC_BASE_ADDR 0xb0001000 -+#define JZ4740_TCU_BASE_ADDR 0xb0002000 -+#define JZ4740_WDT_BASE_ADDR 0xb0002000 -+#define JZ4740_RTC_BASE_ADDR 0xb0003000 -+#define JZ4740_GPIO_BASE_ADDR 0xb0010000 -+#define JZ4740_AIC_BASE_ADDR 0xb0020000 -+#define JZ4740_ICDC_BASE_ADDR 0xb0020000 -+#define JZ4740_MSC_BASE_ADDR 0xb0021000 -+#define JZ4740_UART0_BASE_ADDR 0xb0030000 -+#define JZ4740_UART1_BASE_ADDR 0xb0031000 -+#define JZ4740_I2C_BASE_ADDR 0xb0042000 -+#define JZ4740_SSI_BASE_ADDR 0xb0043000 -+#define JZ4740_SADC_BASE_ADDR 0xb0070000 -+#define JZ4740_EMC_BASE_ADDR 0xb3010000 -+#define JZ4740_DMAC_BASE_ADDR 0xb3020000 -+#define JZ4740_UHC_BASE_ADDR 0xb3030000 -+#define JZ4740_UDC_BASE_ADDR 0xb3040000 -+#define JZ4740_LCD_BASE_ADDR 0xb3050000 -+#define JZ4740_SLCD_BASE_ADDR 0xb3050000 -+#define JZ4740_CIM_BASE_ADDR 0xb3060000 -+#define JZ4740_IPU_BASE_ADDR 0xb3080000 -+#define JZ4740_ETH_BASE_ADDR 0xb3100000 -+ -+#endif -diff --git a/arch/mips/include/asm/mach-jz4740/clock.h b/arch/mips/include/asm/mach-jz4740/clock.h -new file mode 100644 -index 0000000..9069727 ---- /dev/null -+++ b/arch/mips/include/asm/mach-jz4740/clock.h -@@ -0,0 +1,28 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#ifndef __ASM_JZ4740_CLOCK_H__ -+#define __ASM_JZ4740_CLOCK_H__ -+ -+enum jz4740_wait_mode { -+ JZ4740_WAIT_MODE_IDLE, -+ JZ4740_WAIT_MODE_SLEEP, -+}; -+ -+void jz4740_clock_set_wait_mode(enum jz4740_wait_mode mode); -+ -+void jz4740_clock_udc_enable_auto_suspend(void); -+void jz4740_clock_udc_disable_auto_suspend(void); -+ -+#endif -diff --git a/arch/mips/include/asm/mach-jz4740/dma.h b/arch/mips/include/asm/mach-jz4740/dma.h -new file mode 100644 -index 0000000..bb7fc1e ---- /dev/null -+++ b/arch/mips/include/asm/mach-jz4740/dma.h -@@ -0,0 +1,90 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * JZ7420/JZ4740 DMA definitions -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#ifndef __ASM_MACH_JZ4740_DMA_H__ -+#define __ASM_MACH_JZ4740_DMA_H__ -+ -+struct jz4740_dma_chan; -+ -+enum jz4740_dma_request_type { -+ JZ4740_DMA_TYPE_AUTO_REQUEST = 8, -+ JZ4740_DMA_TYPE_UART_TRANSMIT = 20, -+ JZ4740_DMA_TYPE_UART_RECEIVE = 21, -+ JZ4740_DMA_TYPE_SPI_TRANSMIT = 22, -+ JZ4740_DMA_TYPE_SPI_RECEIVE = 23, -+ JZ4740_DMA_TYPE_AIC_TRANSMIT = 24, -+ JZ4740_DMA_TYPE_AIC_RECEIVE = 25, -+ JZ4740_DMA_TYPE_MMC_TRANSMIT = 26, -+ JZ4740_DMA_TYPE_MMC_RECEIVE = 27, -+ JZ4740_DMA_TYPE_TCU = 28, -+ JZ4740_DMA_TYPE_SADC = 29, -+ JZ4740_DMA_TYPE_SLCD = 30, -+}; -+ -+enum jz4740_dma_width { -+ JZ4740_DMA_WIDTH_32BIT = 0, -+ JZ4740_DMA_WIDTH_8BIT = 1, -+ JZ4740_DMA_WIDTH_16BIT = 2, -+}; -+ -+enum jz4740_dma_transfer_size { -+ JZ4740_DMA_TRANSFER_SIZE_4BYTE = 0, -+ JZ4740_DMA_TRANSFER_SIZE_1BYTE = 1, -+ JZ4740_DMA_TRANSFER_SIZE_2BYTE = 2, -+ JZ4740_DMA_TRANSFER_SIZE_16BYTE = 3, -+ JZ4740_DMA_TRANSFER_SIZE_32BYTE = 4, -+}; -+ -+enum jz4740_dma_flags { -+ JZ4740_DMA_SRC_AUTOINC = 0x2, -+ JZ4740_DMA_DST_AUTOINC = 0x1, -+}; -+ -+enum jz4740_dma_mode { -+ JZ4740_DMA_MODE_SINGLE = 0, -+ JZ4740_DMA_MODE_BLOCK = 1, -+}; -+ -+struct jz4740_dma_config { -+ enum jz4740_dma_width src_width; -+ enum jz4740_dma_width dst_width; -+ enum jz4740_dma_transfer_size transfer_size; -+ enum jz4740_dma_request_type request_type; -+ enum jz4740_dma_flags flags; -+ enum jz4740_dma_mode mode; -+}; -+ -+typedef void (*jz4740_dma_complete_callback_t)(struct jz4740_dma_chan *, int, void *); -+ -+struct jz4740_dma_chan *jz4740_dma_request(void *dev, const char *name); -+void jz4740_dma_free(struct jz4740_dma_chan *dma); -+ -+void jz4740_dma_configure(struct jz4740_dma_chan *dma, -+ const struct jz4740_dma_config *config); -+ -+ -+void jz4740_dma_enable(struct jz4740_dma_chan *dma); -+void jz4740_dma_disable(struct jz4740_dma_chan *dma); -+ -+void jz4740_dma_set_src_addr(struct jz4740_dma_chan *dma, dma_addr_t src); -+void jz4740_dma_set_dst_addr(struct jz4740_dma_chan *dma, dma_addr_t dst); -+void jz4740_dma_set_transfer_count(struct jz4740_dma_chan *dma, uint32_t count); -+ -+uint32_t jz4740_dma_get_residue(const struct jz4740_dma_chan *dma); -+ -+void jz4740_dma_set_complete_cb(struct jz4740_dma_chan *dma, -+ jz4740_dma_complete_callback_t cb); -+ -+#endif /* __ASM_JZ4740_DMA_H__ */ -diff --git a/arch/mips/include/asm/mach-jz4740/gpio.h b/arch/mips/include/asm/mach-jz4740/gpio.h -new file mode 100644 -index 0000000..5f175d7 ---- /dev/null -+++ b/arch/mips/include/asm/mach-jz4740/gpio.h -@@ -0,0 +1,398 @@ -+/* -+ * Copyright (C) 2009, Lars-Peter Clausen -+ * JZ7420/JZ4740 GPIO pin definitions -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#ifndef _JZ_GPIO_H -+#define _JZ_GPIO_H -+ -+#include -+ -+enum jz_gpio_function { -+ JZ_GPIO_FUNC_NONE, -+ JZ_GPIO_FUNC1, -+ JZ_GPIO_FUNC2, -+ JZ_GPIO_FUNC3, -+}; -+ -+ -+/* -+ Usually a driver for a SoC component has to request several gpio pins and -+ configure them as funcion pins. -+ jz_gpio_bulk_request can be used to ease this process. -+ Usually one would do something like: -+ -+ const static struct jz_gpio_bulk_request i2c_pins[] = { -+ JZ_GPIO_BULK_PIN(I2C_SDA), -+ JZ_GPIO_BULK_PIN(I2C_SCK), -+ }; -+ -+ inside the probe function: -+ -+ ret = jz_gpio_bulk_request(i2c_pins, ARRAY_SIZE(i2c_pins)); -+ if (ret) { -+ ... -+ -+ inside the remove function: -+ -+ jz_gpio_bulk_free(i2c_pins, ARRAY_SIZE(i2c_pins)); -+ -+ -+*/ -+struct jz_gpio_bulk_request { -+ int gpio; -+ const char *name; -+ enum jz_gpio_function function; -+}; -+ -+#define JZ_GPIO_BULK_PIN(pin) { \ -+ .gpio = JZ_GPIO_ ## pin, \ -+ .name = #pin, \ -+ .function = JZ_GPIO_FUNC_ ## pin \ -+} -+ -+int jz_gpio_bulk_request(const struct jz_gpio_bulk_request *request, size_t num); -+void jz_gpio_bulk_free(const struct jz_gpio_bulk_request *request, size_t num); -+void jz_gpio_bulk_suspend(const struct jz_gpio_bulk_request *request, size_t num); -+void jz_gpio_bulk_resume(const struct jz_gpio_bulk_request *request, size_t num); -+void jz_gpio_enable_pullup(unsigned gpio); -+void jz_gpio_disable_pullup(unsigned gpio); -+int jz_gpio_set_function(int gpio, enum jz_gpio_function function); -+ -+int jz_gpio_port_direction_input(int port, uint32_t mask); -+int jz_gpio_port_direction_output(int port, uint32_t mask); -+void jz_gpio_port_set_value(int port, uint32_t value, uint32_t mask); -+uint32_t jz_gpio_port_get_value(int port, uint32_t mask); -+ -+#include -+ -+#define JZ_GPIO_PORTA(x) ((x) + 32 * 0) -+#define JZ_GPIO_PORTB(x) ((x) + 32 * 1) -+#define JZ_GPIO_PORTC(x) ((x) + 32 * 2) -+#define JZ_GPIO_PORTD(x) ((x) + 32 * 3) -+ -+/* Port A function pins */ -+#define JZ_GPIO_MEM_DATA0 JZ_GPIO_PORTA(0) -+#define JZ_GPIO_MEM_DATA1 JZ_GPIO_PORTA(1) -+#define JZ_GPIO_MEM_DATA2 JZ_GPIO_PORTA(2) -+#define JZ_GPIO_MEM_DATA3 JZ_GPIO_PORTA(3) -+#define JZ_GPIO_MEM_DATA4 JZ_GPIO_PORTA(4) -+#define JZ_GPIO_MEM_DATA5 JZ_GPIO_PORTA(5) -+#define JZ_GPIO_MEM_DATA6 JZ_GPIO_PORTA(6) -+#define JZ_GPIO_MEM_DATA7 JZ_GPIO_PORTA(7) -+#define JZ_GPIO_MEM_DATA8 JZ_GPIO_PORTA(8) -+#define JZ_GPIO_MEM_DATA9 JZ_GPIO_PORTA(9) -+#define JZ_GPIO_MEM_DATA10 JZ_GPIO_PORTA(10) -+#define JZ_GPIO_MEM_DATA11 JZ_GPIO_PORTA(11) -+#define JZ_GPIO_MEM_DATA12 JZ_GPIO_PORTA(12) -+#define JZ_GPIO_MEM_DATA13 JZ_GPIO_PORTA(13) -+#define JZ_GPIO_MEM_DATA14 JZ_GPIO_PORTA(14) -+#define JZ_GPIO_MEM_DATA15 JZ_GPIO_PORTA(15) -+#define JZ_GPIO_MEM_DATA16 JZ_GPIO_PORTA(16) -+#define JZ_GPIO_MEM_DATA17 JZ_GPIO_PORTA(17) -+#define JZ_GPIO_MEM_DATA18 JZ_GPIO_PORTA(18) -+#define JZ_GPIO_MEM_DATA19 JZ_GPIO_PORTA(19) -+#define JZ_GPIO_MEM_DATA20 JZ_GPIO_PORTA(20) -+#define JZ_GPIO_MEM_DATA21 JZ_GPIO_PORTA(21) -+#define JZ_GPIO_MEM_DATA22 JZ_GPIO_PORTA(22) -+#define JZ_GPIO_MEM_DATA23 JZ_GPIO_PORTA(23) -+#define JZ_GPIO_MEM_DATA24 JZ_GPIO_PORTA(24) -+#define JZ_GPIO_MEM_DATA25 JZ_GPIO_PORTA(25) -+#define JZ_GPIO_MEM_DATA26 JZ_GPIO_PORTA(26) -+#define JZ_GPIO_MEM_DATA27 JZ_GPIO_PORTA(27) -+#define JZ_GPIO_MEM_DATA28 JZ_GPIO_PORTA(28) -+#define JZ_GPIO_MEM_DATA29 JZ_GPIO_PORTA(29) -+#define JZ_GPIO_MEM_DATA30 JZ_GPIO_PORTA(30) -+#define JZ_GPIO_MEM_DATA31 JZ_GPIO_PORTA(31) -+ -+#define JZ_GPIO_FUNC_MEM_DATA0 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA1 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA2 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA3 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA4 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA5 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA6 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA7 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA8 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA9 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA10 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA11 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA12 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA13 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA14 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA15 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA16 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA17 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA18 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA19 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA20 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA21 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA22 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA23 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA24 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA25 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA26 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA27 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA28 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA29 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA30 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DATA31 JZ_GPIO_FUNC1 -+ -+/* Port B function pins */ -+#define JZ_GPIO_MEM_ADDR0 JZ_GPIO_PORTB(0) -+#define JZ_GPIO_MEM_ADDR1 JZ_GPIO_PORTB(1) -+#define JZ_GPIO_MEM_ADDR2 JZ_GPIO_PORTB(2) -+#define JZ_GPIO_MEM_ADDR3 JZ_GPIO_PORTB(3) -+#define JZ_GPIO_MEM_ADDR4 JZ_GPIO_PORTB(4) -+#define JZ_GPIO_MEM_ADDR5 JZ_GPIO_PORTB(5) -+#define JZ_GPIO_MEM_ADDR6 JZ_GPIO_PORTB(6) -+#define JZ_GPIO_MEM_ADDR7 JZ_GPIO_PORTB(7) -+#define JZ_GPIO_MEM_ADDR8 JZ_GPIO_PORTB(8) -+#define JZ_GPIO_MEM_ADDR9 JZ_GPIO_PORTB(9) -+#define JZ_GPIO_MEM_ADDR10 JZ_GPIO_PORTB(10) -+#define JZ_GPIO_MEM_ADDR11 JZ_GPIO_PORTB(11) -+#define JZ_GPIO_MEM_ADDR12 JZ_GPIO_PORTB(12) -+#define JZ_GPIO_MEM_ADDR13 JZ_GPIO_PORTB(13) -+#define JZ_GPIO_MEM_ADDR14 JZ_GPIO_PORTB(14) -+#define JZ_GPIO_MEM_ADDR15 JZ_GPIO_PORTB(15) -+#define JZ_GPIO_MEM_ADDR16 JZ_GPIO_PORTB(16) -+#define JZ_GPIO_MEM_CLS JZ_GPIO_PORTB(17) -+#define JZ_GPIO_MEM_SPL JZ_GPIO_PORTB(18) -+#define JZ_GPIO_MEM_DCS JZ_GPIO_PORTB(19) -+#define JZ_GPIO_MEM_RAS JZ_GPIO_PORTB(20) -+#define JZ_GPIO_MEM_CAS JZ_GPIO_PORTB(21) -+#define JZ_GPIO_MEM_SDWE JZ_GPIO_PORTB(22) -+#define JZ_GPIO_MEM_CKE JZ_GPIO_PORTB(23) -+#define JZ_GPIO_MEM_CKO JZ_GPIO_PORTB(24) -+#define JZ_GPIO_MEM_CS0 JZ_GPIO_PORTB(25) -+#define JZ_GPIO_MEM_CS1 JZ_GPIO_PORTB(26) -+#define JZ_GPIO_MEM_CS2 JZ_GPIO_PORTB(27) -+#define JZ_GPIO_MEM_CS3 JZ_GPIO_PORTB(28) -+#define JZ_GPIO_MEM_RD JZ_GPIO_PORTB(29) -+#define JZ_GPIO_MEM_WR JZ_GPIO_PORTB(30) -+#define JZ_GPIO_MEM_WE0 JZ_GPIO_PORTB(31) -+ -+#define JZ_GPIO_FUNC_MEM_ADDR0 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_ADDR1 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_ADDR2 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_ADDR3 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_ADDR4 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_ADDR5 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_ADDR6 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_ADDR7 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_ADDR8 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_ADDR9 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_ADDR10 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_ADDR11 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_ADDR12 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_ADDR13 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_ADDR14 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_ADDR15 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_ADDR16 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_CLS JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_SPL JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_DCS JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_RAS JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_CAS JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_SDWE JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_CKE JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_CKO JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_CS0 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_CS1 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_CS2 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_CS3 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_RD JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_WR JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_WE0 JZ_GPIO_FUNC1 -+ -+ -+#define JZ_GPIO_MEM_ADDR21 JZ_GPIO_PORTB(17) -+#define JZ_GPIO_MEM_ADDR22 JZ_GPIO_PORTB(18) -+ -+#define JZ_GPIO_FUNC_MEM_ADDR21 JZ_GPIO_FUNC2 -+#define JZ_GPIO_FUNC_MEM_ADDR22 JZ_GPIO_FUNC2 -+ -+/* Port C function pins */ -+#define JZ_GPIO_LCD_DATA0 JZ_GPIO_PORTC(0) -+#define JZ_GPIO_LCD_DATA1 JZ_GPIO_PORTC(1) -+#define JZ_GPIO_LCD_DATA2 JZ_GPIO_PORTC(2) -+#define JZ_GPIO_LCD_DATA3 JZ_GPIO_PORTC(3) -+#define JZ_GPIO_LCD_DATA4 JZ_GPIO_PORTC(4) -+#define JZ_GPIO_LCD_DATA5 JZ_GPIO_PORTC(5) -+#define JZ_GPIO_LCD_DATA6 JZ_GPIO_PORTC(6) -+#define JZ_GPIO_LCD_DATA7 JZ_GPIO_PORTC(7) -+#define JZ_GPIO_LCD_DATA8 JZ_GPIO_PORTC(8) -+#define JZ_GPIO_LCD_DATA9 JZ_GPIO_PORTC(9) -+#define JZ_GPIO_LCD_DATA10 JZ_GPIO_PORTC(10) -+#define JZ_GPIO_LCD_DATA11 JZ_GPIO_PORTC(11) -+#define JZ_GPIO_LCD_DATA12 JZ_GPIO_PORTC(12) -+#define JZ_GPIO_LCD_DATA13 JZ_GPIO_PORTC(13) -+#define JZ_GPIO_LCD_DATA14 JZ_GPIO_PORTC(14) -+#define JZ_GPIO_LCD_DATA15 JZ_GPIO_PORTC(15) -+#define JZ_GPIO_LCD_DATA16 JZ_GPIO_PORTC(16) -+#define JZ_GPIO_LCD_DATA17 JZ_GPIO_PORTC(17) -+#define JZ_GPIO_LCD_PCLK JZ_GPIO_PORTC(18) -+#define JZ_GPIO_LCD_HSYNC JZ_GPIO_PORTC(19) -+#define JZ_GPIO_LCD_VSYNC JZ_GPIO_PORTC(20) -+#define JZ_GPIO_LCD_DE JZ_GPIO_PORTC(21) -+#define JZ_GPIO_LCD_PS JZ_GPIO_PORTC(22) -+#define JZ_GPIO_LCD_REV JZ_GPIO_PORTC(23) -+#define JZ_GPIO_MEM_WE1 JZ_GPIO_PORTC(24) -+#define JZ_GPIO_MEM_WE2 JZ_GPIO_PORTC(25) -+#define JZ_GPIO_MEM_WE3 JZ_GPIO_PORTC(26) -+#define JZ_GPIO_MEM_WAIT JZ_GPIO_PORTC(27) -+#define JZ_GPIO_MEM_FRE JZ_GPIO_PORTC(28) -+#define JZ_GPIO_MEM_FWE JZ_GPIO_PORTC(29) -+ -+#define JZ_GPIO_FUNC_LCD_DATA0 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA1 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA2 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA3 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA4 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA5 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA6 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA7 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA8 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA9 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA10 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA11 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA12 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA13 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA14 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA15 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA16 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DATA17 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_PCLK JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_VSYNC JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_HSYNC JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_DE JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_PS JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_LCD_REV JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_WE1 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_WE2 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_WE3 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_WAIT JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_FRE JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MEM_FWE JZ_GPIO_FUNC1 -+ -+ -+#define JZ_GPIO_MEM_ADDR19 JZ_GPIO_PORTB(22) -+#define JZ_GPIO_MEM_ADDR20 JZ_GPIO_PORTB(23) -+ -+#define JZ_GPIO_FUNC_MEM_ADDR19 JZ_GPIO_FUNC2 -+#define JZ_GPIO_FUNC_MEM_ADDR20 JZ_GPIO_FUNC2 -+ -+/* Port D function pins */ -+#define JZ_GPIO_CIM_DATA0 JZ_GPIO_PORTD(0) -+#define JZ_GPIO_CIM_DATA1 JZ_GPIO_PORTD(1) -+#define JZ_GPIO_CIM_DATA2 JZ_GPIO_PORTD(2) -+#define JZ_GPIO_CIM_DATA3 JZ_GPIO_PORTD(3) -+#define JZ_GPIO_CIM_DATA4 JZ_GPIO_PORTD(4) -+#define JZ_GPIO_CIM_DATA5 JZ_GPIO_PORTD(5) -+#define JZ_GPIO_CIM_DATA6 JZ_GPIO_PORTD(6) -+#define JZ_GPIO_CIM_DATA7 JZ_GPIO_PORTD(7) -+#define JZ_GPIO_MSC_CMD JZ_GPIO_PORTD(8) -+#define JZ_GPIO_MSC_CLK JZ_GPIO_PORTD(9) -+#define JZ_GPIO_MSC_DATA0 JZ_GPIO_PORTD(10) -+#define JZ_GPIO_MSC_DATA1 JZ_GPIO_PORTD(11) -+#define JZ_GPIO_MSC_DATA2 JZ_GPIO_PORTD(12) -+#define JZ_GPIO_MSC_DATA3 JZ_GPIO_PORTD(13) -+#define JZ_GPIO_CIM_MCLK JZ_GPIO_PORTD(14) -+#define JZ_GPIO_CIM_PCLK JZ_GPIO_PORTD(15) -+#define JZ_GPIO_CIM_VSYNC JZ_GPIO_PORTD(16) -+#define JZ_GPIO_CIM_HSYNC JZ_GPIO_PORTD(17) -+#define JZ_GPIO_SPI_CLK JZ_GPIO_PORTD(18) -+#define JZ_GPIO_SPI_CE0 JZ_GPIO_PORTD(19) -+#define JZ_GPIO_SPI_DT JZ_GPIO_PORTD(20) -+#define JZ_GPIO_SPI_DR JZ_GPIO_PORTD(21) -+#define JZ_GPIO_SPI_CE1 JZ_GPIO_PORTD(22) -+#define JZ_GPIO_PWM0 JZ_GPIO_PORTD(23) -+#define JZ_GPIO_PWM1 JZ_GPIO_PORTD(24) -+#define JZ_GPIO_PWM2 JZ_GPIO_PORTD(25) -+#define JZ_GPIO_PWM3 JZ_GPIO_PORTD(26) -+#define JZ_GPIO_PWM4 JZ_GPIO_PORTD(27) -+#define JZ_GPIO_PWM5 JZ_GPIO_PORTD(28) -+#define JZ_GPIO_PWM6 JZ_GPIO_PORTD(30) -+#define JZ_GPIO_PWM7 JZ_GPIO_PORTD(31) -+ -+#define JZ_GPIO_FUNC_CIM_DATA JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_CIM_DATA0 JZ_GPIO_FUNC_CIM_DATA -+#define JZ_GPIO_FUNC_CIM_DATA1 JZ_GPIO_FUNC_CIM_DATA -+#define JZ_GPIO_FUNC_CIM_DATA2 JZ_GPIO_FUNC_CIM_DATA -+#define JZ_GPIO_FUNC_CIM_DATA3 JZ_GPIO_FUNC_CIM_DATA -+#define JZ_GPIO_FUNC_CIM_DATA4 JZ_GPIO_FUNC_CIM_DATA -+#define JZ_GPIO_FUNC_CIM_DATA5 JZ_GPIO_FUNC_CIM_DATA -+#define JZ_GPIO_FUNC_CIM_DATA6 JZ_GPIO_FUNC_CIM_DATA -+#define JZ_GPIO_FUNC_CIM_DATA7 JZ_GPIO_FUNC_CIM_DATA -+#define JZ_GPIO_FUNC_MSC_CMD JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MSC_CLK JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MSC_DATA JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_MSC_DATA0 JZ_GPIO_FUNC_MSC_DATA -+#define JZ_GPIO_FUNC_MSC_DATA1 JZ_GPIO_FUNC_MSC_DATA -+#define JZ_GPIO_FUNC_MSC_DATA2 JZ_GPIO_FUNC_MSC_DATA -+#define JZ_GPIO_FUNC_MSC_DATA3 JZ_GPIO_FUNC_MSC_DATA -+#define JZ_GPIO_FUNC_CIM_MCLK JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_CIM_PCLK JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_CIM_VSYNC JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_CIM_HSYNC JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_SPI_CLK JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_SPI_CE0 JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_SPI_DT JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_SPI_DR JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_SPI_CE1 JZ_GPIO_FUNC1 -+ -+#define JZ_GPIO_FUNC_PWM JZ_GPIO_FUNC1 -+#define JZ_GPIO_FUNC_PWM0 JZ_GPIO_FUNC_PWM -+#define JZ_GPIO_FUNC_PWM1 JZ_GPIO_FUNC_PWM -+#define JZ_GPIO_FUNC_PWM2 JZ_GPIO_FUNC_PWM -+#define JZ_GPIO_FUNC_PWM3 JZ_GPIO_FUNC_PWM -+#define JZ_GPIO_FUNC_PWM4 JZ_GPIO_FUNC_PWM -+#define JZ_GPIO_FUNC_PWM5 JZ_GPIO_FUNC_PWM -+#define JZ_GPIO_FUNC_PWM6 JZ_GPIO_FUNC_PWM -+#define JZ_GPIO_FUNC_PWM7 JZ_GPIO_FUNC_PWM -+ -+#define JZ_GPIO_MEM_SCLK_RSTN JZ_GPIO_PORTD(18) -+#define JZ_GPIO_MEM_BCLK JZ_GPIO_PORTD(19) -+#define JZ_GPIO_MEM_SDATO JZ_GPIO_PORTD(20) -+#define JZ_GPIO_MEM_SDATI JZ_GPIO_PORTD(21) -+#define JZ_GPIO_MEM_SYNC JZ_GPIO_PORTD(22) -+#define JZ_GPIO_I2C_SDA JZ_GPIO_PORTD(23) -+#define JZ_GPIO_I2C_SCK JZ_GPIO_PORTD(24) -+#define JZ_GPIO_UART0_TXD JZ_GPIO_PORTD(25) -+#define JZ_GPIO_UART0_RXD JZ_GPIO_PORTD(26) -+#define JZ_GPIO_MEM_ADDR17 JZ_GPIO_PORTD(27) -+#define JZ_GPIO_MEM_ADDR18 JZ_GPIO_PORTD(28) -+#define JZ_GPIO_UART0_CTS JZ_GPIO_PORTD(30) -+#define JZ_GPIO_UART0_RTS JZ_GPIO_PORTD(31) -+ -+#define JZ_GPIO_FUNC_MEM_SCLK_RSTN JZ_GPIO_FUNC2 -+#define JZ_GPIO_FUNC_MEM_BCLK JZ_GPIO_FUNC2 -+#define JZ_GPIO_FUNC_MEM_SDATO JZ_GPIO_FUNC2 -+#define JZ_GPIO_FUNC_MEM_SDATI JZ_GPIO_FUNC2 -+#define JZ_GPIO_FUNC_MEM_SYNC JZ_GPIO_FUNC2 -+#define JZ_GPIO_FUNC_I2C_SDA JZ_GPIO_FUNC2 -+#define JZ_GPIO_FUNC_I2C_SCK JZ_GPIO_FUNC2 -+#define JZ_GPIO_FUNC_UART0_TXD JZ_GPIO_FUNC2 -+#define JZ_GPIO_FUNC_UART0_RXD JZ_GPIO_FUNC2 -+#define JZ_GPIO_FUNC_MEM_ADDR17 JZ_GPIO_FUNC2 -+#define JZ_GPIO_FUNC_MEM_ADDR18 JZ_GPIO_FUNC2 -+#define JZ_GPIO_FUNC_UART0_CTS JZ_GPIO_FUNC2 -+#define JZ_GPIO_FUNC_UART0_RTS JZ_GPIO_FUNC2 -+ -+#define JZ_GPIO_UART1_RXD JZ_GPIO_PORTD(30) -+#define JZ_GPIO_UART1_TXD JZ_GPIO_PORTD(31) -+ -+#define JZ_GPIO_FUNC_UART1_RXD JZ_GPIO_FUNC3 -+#define JZ_GPIO_FUNC_UART1_TXD JZ_GPIO_FUNC3 -+ -+#endif -diff --git a/arch/mips/include/asm/mach-jz4740/irq.h b/arch/mips/include/asm/mach-jz4740/irq.h -new file mode 100644 -index 0000000..5e27b78 ---- /dev/null -+++ b/arch/mips/include/asm/mach-jz4740/irq.h -@@ -0,0 +1,55 @@ -+/* -+ * Copyright (C) 2009-2010, Lars-Peter Clausen -+ * JZ7420/JZ4740 IRQ definitions -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#ifndef __ASM_MACH_JZ4740_IRQ_H__ -+#define __ASM_MACH_JZ4740_IRQ_H__ -+ -+#define MIPS_CPU_IRQ_BASE 0 -+#define JZ4740_IRQ_BASE 8 -+ -+/* 1st-level interrupts */ -+#define JZ4740_IRQ(x) (JZ4740_IRQ_BASE + (x)) -+#define JZ4740_IRQ_I2C JZ4740_IRQ(1) -+#define JZ4740_IRQ_UHC JZ4740_IRQ(3) -+#define JZ4740_IRQ_UART1 JZ4740_IRQ(8) -+#define JZ4740_IRQ_UART0 JZ4740_IRQ(9) -+#define JZ4740_IRQ_SADC JZ4740_IRQ(12) -+#define JZ4740_IRQ_MSC JZ4740_IRQ(14) -+#define JZ4740_IRQ_RTC JZ4740_IRQ(15) -+#define JZ4740_IRQ_SSI JZ4740_IRQ(16) -+#define JZ4740_IRQ_CIM JZ4740_IRQ(17) -+#define JZ4740_IRQ_AIC JZ4740_IRQ(18) -+#define JZ4740_IRQ_ETH JZ4740_IRQ(19) -+#define JZ4740_IRQ_DMAC JZ4740_IRQ(20) -+#define JZ4740_IRQ_TCU2 JZ4740_IRQ(21) -+#define JZ4740_IRQ_TCU1 JZ4740_IRQ(22) -+#define JZ4740_IRQ_TCU0 JZ4740_IRQ(23) -+#define JZ4740_IRQ_UDC JZ4740_IRQ(24) -+#define JZ4740_IRQ_GPIO3 JZ4740_IRQ(25) -+#define JZ4740_IRQ_GPIO2 JZ4740_IRQ(26) -+#define JZ4740_IRQ_GPIO1 JZ4740_IRQ(27) -+#define JZ4740_IRQ_GPIO0 JZ4740_IRQ(28) -+#define JZ4740_IRQ_IPU JZ4740_IRQ(29) -+#define JZ4740_IRQ_LCD JZ4740_IRQ(30) -+ -+/* 2nd-level interrupts */ -+#define JZ4740_IRQ_DMA(x) ((x) + JZ4740_IRQ(32)) -+ -+#define JZ4740_IRQ_INTC_GPIO(x) (JZ4740_IRQ_GPIO0 - (x)) -+#define JZ4740_IRQ_GPIO(x) (JZ4740_IRQ(48) + (x)) -+ -+#define NR_IRQS (JZ4740_IRQ_GPIO(127) + 1) -+ -+#endif -diff --git a/arch/mips/include/asm/mach-jz4740/platform.h b/arch/mips/include/asm/mach-jz4740/platform.h -new file mode 100644 -index 0000000..a2e2871 ---- /dev/null -+++ b/arch/mips/include/asm/mach-jz4740/platform.h -@@ -0,0 +1,34 @@ -+/* -+ * Copyright (C) 2009, Lars-Peter Clausen -+ * JZ7420/JZ4740 platform device definitions -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+ -+#ifndef __JZ4740_PLATFORM_H -+#define __JZ4740_PLATFORM_H -+ -+#include -+ -+extern struct platform_device jz4740_usb_ohci_device; -+extern struct platform_device jz4740_usb_gdt_device; -+extern struct platform_device jz4740_mmc_device; -+extern struct platform_device jz4740_rtc_device; -+extern struct platform_device jz4740_i2c_device; -+extern struct platform_device jz4740_nand_device; -+extern struct platform_device jz4740_framebuffer_device; -+extern struct platform_device jz4740_i2s_device; -+extern struct platform_device jz4740_codec_device; -+extern struct platform_device jz4740_adc_device; -+extern struct platform_device jz4740_battery_device; -+ -+#endif -diff --git a/arch/mips/include/asm/mach-jz4740/serial.h b/arch/mips/include/asm/mach-jz4740/serial.h -new file mode 100644 -index 0000000..c4819b9 ---- /dev/null -+++ b/arch/mips/include/asm/mach-jz4740/serial.h -@@ -0,0 +1,30 @@ -+/* -+ * linux/include/asm-mips/mach-jz4740/serial.h -+ * -+ * Ingenic's JZ4740 common include. -+ * -+ * Copyright (C) 2006 - 2007 Ingenic Semiconductor Inc. -+ * -+ * Author: -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#ifndef __ASM_BOARD_SERIAL_H__ -+#define __ASM_BOARD_SERIAL_H__ -+ -+#ifndef CONFIG_SERIAL_MANY_PORTS -+#undef RS_TABLE_SIZE -+#define RS_TABLE_SIZE 1 -+#endif -+ -+#define JZ_BASE_BAUD (12000000/16) -+ -+#define JZ_SERIAL_PORT_DEFNS \ -+ { .baud_base = JZ_BASE_BAUD, .irq = IRQ_UART0, \ -+ .flags = STD_COM_FLAGS, .iomem_base = (u8 *)UART0_BASE, \ -+ .iomem_reg_shift = 2, .io_type = SERIAL_IO_MEM }, -+ -+#endif /* __ASM_BORAD_SERIAL_H__ */ -diff --git a/arch/mips/include/asm/mach-jz4740/timer.h b/arch/mips/include/asm/mach-jz4740/timer.h -new file mode 100644 -index 0000000..30153ff ---- /dev/null -+++ b/arch/mips/include/asm/mach-jz4740/timer.h -@@ -0,0 +1,22 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * JZ4740 platform timer support -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#ifndef __ASM_MACH_JZ4740_TIMER -+#define __ASM_MACH_JZ4740_TIMER -+ -+void jz4740_timer_enable_watchdog(void); -+void jz4740_timer_disable_watchdog(void); -+ -+#endif -diff --git a/arch/mips/include/asm/mach-jz4740/war.h b/arch/mips/include/asm/mach-jz4740/war.h -new file mode 100644 -index 0000000..3a5bc17 ---- /dev/null -+++ b/arch/mips/include/asm/mach-jz4740/war.h -@@ -0,0 +1,25 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle -+ */ -+#ifndef __ASM_MIPS_MACH_JZ4740_WAR_H -+#define __ASM_MIPS_MACH_JZ4740_WAR_H -+ -+#define R4600_V1_INDEX_ICACHEOP_WAR 0 -+#define R4600_V1_HIT_CACHEOP_WAR 0 -+#define R4600_V2_HIT_CACHEOP_WAR 0 -+#define R5432_CP0_INTERRUPT_WAR 0 -+#define BCM1250_M3_WAR 0 -+#define SIBYTE_1956_WAR 0 -+#define MIPS4K_ICACHE_REFILL_WAR 0 -+#define MIPS_CACHE_SYNC_WAR 0 -+#define TX49XX_ICACHE_INDEX_INV_WAR 0 -+#define RM9000_CDEX_SMP_WAR 0 -+#define ICACHE_REFILLS_WORKAROUND_WAR 0 -+#define R10000_LLSC_WAR 0 -+#define MIPS34K_MISSED_ITLB_WAR 0 -+ -+#endif /* __ASM_MIPS_MACH_JZ4740_WAR_H */ -diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig -new file mode 100644 -index 0000000..b959769 ---- /dev/null -+++ b/arch/mips/jz4740/Kconfig -@@ -0,0 +1,29 @@ -+choice -+ prompt "Machine type" -+ depends on MACH_JZ -+ default JZ4740_QI_LB60 -+ -+endchoice -+ -+config HAVE_PWM -+ bool -+ -+config SOC_JZ4740 -+ bool -+ select JZSOC -+ select GENERIC_GPIO -+ select ARCH_REQUIRE_GPIOLIB -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select IRQ_CPU -+ select DMA_NONCOHERENT -+ select HAVE_PWM -+ -+config JZSOC -+ bool -+ select JZRISC -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ -+config JZRISC -+ bool -diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile -new file mode 100644 -index 0000000..398ee91 ---- /dev/null -+++ b/arch/mips/jz4740/Makefile -@@ -0,0 +1,18 @@ -+# -+# Makefile for the Ingenic JZ4740. -+# -+ -+# Object file lists. -+ -+obj-y += prom.o irq.o time.o reset.o setup.o dma.o \ -+ gpio.o clock.o platform.o timer.o pwm.o -+ -+obj-$(CONFIG_DEBUG_FS) += clock-debugfs.o -+ -+# board specific support -+ -+# PM support -+ -+obj-$(CONFIG_PM) += pm.o -+ -+EXTRA_CFLAGS += -Werror -Wall -diff --git a/arch/mips/jz4740/clock-debugfs.c b/arch/mips/jz4740/clock-debugfs.c -new file mode 100644 -index 0000000..993b91b ---- /dev/null -+++ b/arch/mips/jz4740/clock-debugfs.c -@@ -0,0 +1,109 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * JZ4740 SoC clock support debugfs entries -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+#include "clock.h" -+ -+static struct dentry *jz4740_clock_debugfs; -+ -+static int jz4740_clock_debugfs_show_enabled(void *data, uint64_t *value) -+{ -+ struct clk *clk = data; -+ *value = clk_is_enabled(clk); -+ -+ return 0; -+} -+ -+static int jz4740_clock_debugfs_set_enabled(void *data, uint64_t value) -+{ -+ struct clk *clk = data; -+ -+ if (value) -+ return clk_enable(clk); -+ else -+ clk_disable(clk); -+ -+ return 0; -+} -+ -+DEFINE_SIMPLE_ATTRIBUTE(jz4740_clock_debugfs_ops_enabled, -+ jz4740_clock_debugfs_show_enabled, -+ jz4740_clock_debugfs_set_enabled, -+ "%llu\n"); -+ -+static int jz4740_clock_debugfs_show_rate(void *data, uint64_t *value) -+{ -+ struct clk *clk = data; -+ *value = clk_get_rate(clk); -+ -+ return 0; -+} -+ -+DEFINE_SIMPLE_ATTRIBUTE(jz4740_clock_debugfs_ops_rate, -+ jz4740_clock_debugfs_show_rate, -+ NULL, -+ "%llu\n"); -+ -+void jz4740_clock_debugfs_add_clk(struct clk *clk) -+{ -+ if (!jz4740_clock_debugfs) -+ return; -+ -+ clk->debugfs_entry = debugfs_create_dir(clk->name, jz4740_clock_debugfs); -+ debugfs_create_file("rate", S_IWUGO | S_IRUGO, clk->debugfs_entry, clk, -+ &jz4740_clock_debugfs_ops_rate); -+ debugfs_create_file("enabled", S_IRUGO, clk->debugfs_entry, clk, -+ &jz4740_clock_debugfs_ops_enabled); -+ -+ if (clk->parent) { -+ char parent_path[100]; -+ snprintf(parent_path, 100, "../%s", clk->parent->name); -+ clk->debugfs_parent_entry = debugfs_create_symlink("parent", -+ clk->debugfs_entry, -+ parent_path); -+ } -+} -+ -+/* TODO: Locking */ -+void jz4740_clock_debugfs_update_parent(struct clk *clk) -+{ -+ if (clk->debugfs_parent_entry) -+ debugfs_remove(clk->debugfs_parent_entry); -+ -+ if (clk->parent) { -+ char parent_path[100]; -+ snprintf(parent_path, 100, "../%s", clk->parent->name); -+ clk->debugfs_parent_entry = debugfs_create_symlink("parent", -+ clk->debugfs_entry, -+ parent_path); -+ } else { -+ clk->debugfs_parent_entry = NULL; -+ } -+} -+ -+void jz4740_clock_debugfs_init(void) -+{ -+ jz4740_clock_debugfs = debugfs_create_dir("jz4740-clock", NULL); -+ if (IS_ERR(jz4740_clock_debugfs)) -+ jz4740_clock_debugfs = NULL; -+} -diff --git a/arch/mips/jz4740/clock.c b/arch/mips/jz4740/clock.c -new file mode 100644 -index 0000000..df0d6d3 ---- /dev/null -+++ b/arch/mips/jz4740/clock.c -@@ -0,0 +1,935 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * JZ4740 SoC clock support -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include "clock.h" -+ -+#define JZ_REG_CLOCK_CTRL 0x00 -+#define JZ_REG_CLOCK_LOW_POWER 0x04 -+#define JZ_REG_CLOCK_PLL 0x10 -+#define JZ_REG_CLOCK_GATE 0x20 -+#define JZ_REG_CLOCK_SLEEP_CTRL 0x24 -+#define JZ_REG_CLOCK_I2S 0x60 -+#define JZ_REG_CLOCK_LCD 0x64 -+#define JZ_REG_CLOCK_MMC 0x68 -+#define JZ_REG_CLOCK_UHC 0x6C -+#define JZ_REG_CLOCK_SPI 0x74 -+ -+#define JZ_CLOCK_CTRL_I2S_SRC_PLL BIT(31) -+#define JZ_CLOCK_CTRL_KO_ENABLE BIT(30) -+#define JZ_CLOCK_CTRL_UDC_SRC_PLL BIT(29) -+#define JZ_CLOCK_CTRL_UDIV_MASK 0x1f800000 -+#define JZ_CLOCK_CTRL_CHANGE_ENABLE BIT(22) -+#define JZ_CLOCK_CTRL_PLL_HALF BIT(21) -+#define JZ_CLOCK_CTRL_LDIV_MASK 0x001f0000 -+#define JZ_CLOCK_CTRL_UDIV_OFFSET 23 -+#define JZ_CLOCK_CTRL_LDIV_OFFSET 16 -+#define JZ_CLOCK_CTRL_MDIV_OFFSET 12 -+#define JZ_CLOCK_CTRL_PDIV_OFFSET 8 -+#define JZ_CLOCK_CTRL_HDIV_OFFSET 4 -+#define JZ_CLOCK_CTRL_CDIV_OFFSET 0 -+ -+#define JZ_CLOCK_GATE_UART0 BIT(0) -+#define JZ_CLOCK_GATE_TCU BIT(1) -+#define JZ_CLOCK_GATE_RTC BIT(2) -+#define JZ_CLOCK_GATE_I2C BIT(3) -+#define JZ_CLOCK_GATE_SPI BIT(4) -+#define JZ_CLOCK_GATE_AIC BIT(5) -+#define JZ_CLOCK_GATE_I2S BIT(6) -+#define JZ_CLOCK_GATE_MMC BIT(7) -+#define JZ_CLOCK_GATE_ADC BIT(8) -+#define JZ_CLOCK_GATE_CIM BIT(9) -+#define JZ_CLOCK_GATE_LCD BIT(10) -+#define JZ_CLOCK_GATE_UDC BIT(11) -+#define JZ_CLOCK_GATE_DMAC BIT(12) -+#define JZ_CLOCK_GATE_IPU BIT(13) -+#define JZ_CLOCK_GATE_UHC BIT(14) -+#define JZ_CLOCK_GATE_UART1 BIT(15) -+ -+#define JZ_CLOCK_I2S_DIV_MASK 0x01ff -+ -+#define JZ_CLOCK_LCD_DIV_MASK 0x01ff -+ -+#define JZ_CLOCK_MMC_DIV_MASK 0x001f -+ -+#define JZ_CLOCK_UHC_DIV_MASK 0x000f -+ -+#define JZ_CLOCK_SPI_SRC_PLL BIT(31) -+#define JZ_CLOCK_SPI_DIV_MASK 0x000f -+ -+#define JZ_CLOCK_PLL_M_MASK 0x01ff -+#define JZ_CLOCK_PLL_N_MASK 0x001f -+#define JZ_CLOCK_PLL_OD_MASK 0x0003 -+#define JZ_CLOCK_PLL_STABLE BIT(10) -+#define JZ_CLOCK_PLL_BYPASS BIT(9) -+#define JZ_CLOCK_PLL_ENABLED BIT(8) -+#define JZ_CLOCK_PLL_STABLIZE_MASK 0x000f -+#define JZ_CLOCK_PLL_M_OFFSET 23 -+#define JZ_CLOCK_PLL_N_OFFSET 18 -+#define JZ_CLOCK_PLL_OD_OFFSET 16 -+ -+#define JZ_CLOCK_LOW_POWER_MODE_DOZE BIT(2) -+#define JZ_CLOCK_LOW_POWER_MODE_SLEEP BIT(0) -+ -+#define JZ_CLOCK_SLEEP_CTRL_SUSPEND_UHC BIT(7) -+#define JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC BIT(6) -+ -+static void __iomem *jz_clock_base; -+static spinlock_t jz_clock_lock; -+static LIST_HEAD(jz_clocks); -+ -+struct main_clk { -+ struct clk clk; -+ uint32_t div_offset; -+}; -+ -+struct divided_clk { -+ struct clk clk; -+ uint32_t reg; -+ uint32_t mask; -+}; -+ -+struct static_clk { -+ struct clk clk; -+ unsigned long rate; -+}; -+ -+static uint32_t jz_clk_reg_read(int reg) -+{ -+ return readl(jz_clock_base + reg); -+} -+ -+static void jz_clk_reg_write_mask(int reg, uint32_t val, uint32_t mask) -+{ -+ uint32_t val2; -+ -+ spin_lock(&jz_clock_lock); -+ val2 = readl(jz_clock_base + reg); -+ val2 &= ~mask; -+ val2 |= val; -+ writel(val2, jz_clock_base + reg); -+ spin_unlock(&jz_clock_lock); -+} -+ -+static void jz_clk_reg_set_bits(int reg, uint32_t mask) -+{ -+ uint32_t val; -+ -+ spin_lock(&jz_clock_lock); -+ val = readl(jz_clock_base + reg); -+ val |= mask; -+ writel(val, jz_clock_base + reg); -+ spin_unlock(&jz_clock_lock); -+} -+ -+static void jz_clk_reg_clear_bits(int reg, uint32_t mask) -+{ -+ uint32_t val; -+ -+ spin_lock(&jz_clock_lock); -+ val = readl(jz_clock_base + reg); -+ val &= ~mask; -+ writel(val, jz_clock_base + reg); -+ spin_unlock(&jz_clock_lock); -+} -+ -+static int jz_clk_enable_gating(struct clk *clk) -+{ -+ if (clk->gate_bit == JZ4740_CLK_NOT_GATED) -+ return -EINVAL; -+ -+ jz_clk_reg_clear_bits(JZ_REG_CLOCK_GATE, clk->gate_bit); -+ return 0; -+} -+ -+static int jz_clk_disable_gating(struct clk *clk) -+{ -+ if (clk->gate_bit == JZ4740_CLK_NOT_GATED) -+ return -EINVAL; -+ -+ jz_clk_reg_set_bits(JZ_REG_CLOCK_GATE, clk->gate_bit); -+ return 0; -+} -+ -+static int jz_clk_is_enabled_gating(struct clk *clk) -+{ -+ if (clk->gate_bit == JZ4740_CLK_NOT_GATED) -+ return 1; -+ -+ return !(jz_clk_reg_read(JZ_REG_CLOCK_GATE) & clk->gate_bit); -+} -+ -+static unsigned long jz_clk_static_get_rate(struct clk *clk) -+{ -+ return ((struct static_clk *)clk)->rate; -+} -+ -+static int jz_clk_ko_enable(struct clk *clk) -+{ -+ jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_KO_ENABLE); -+ return 0; -+} -+ -+static int jz_clk_ko_disable(struct clk *clk) -+{ -+ jz_clk_reg_clear_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_KO_ENABLE); -+ return 0; -+} -+ -+static int jz_clk_ko_is_enabled(struct clk *clk) -+{ -+ return !!(jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_KO_ENABLE); -+} -+ -+static const int pllno[] = {1, 2, 2, 4}; -+ -+static unsigned long jz_clk_pll_get_rate(struct clk *clk) -+{ -+ uint32_t val; -+ int m; -+ int n; -+ int od; -+ -+ val = jz_clk_reg_read(JZ_REG_CLOCK_PLL); -+ -+ if (val & JZ_CLOCK_PLL_BYPASS) -+ return clk_get_rate(clk->parent); -+ -+ m = ((val >> 23) & 0x1ff) + 2; -+ n = ((val >> 18) & 0x1f) + 2; -+ od = (val >> 16) & 0x3; -+ -+ return clk_get_rate(clk->parent) * (m / n) / pllno[od]; -+} -+ -+static unsigned long jz_clk_pll_half_get_rate(struct clk *clk) -+{ -+ uint32_t reg; -+ -+ reg = jz_clk_reg_read(JZ_REG_CLOCK_CTRL); -+ if (reg & JZ_CLOCK_CTRL_PLL_HALF) -+ return jz_clk_pll_get_rate(clk->parent); -+ return jz_clk_pll_get_rate(clk->parent) >> 1; -+} -+ -+static const int jz_clk_main_divs[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32}; -+ -+static unsigned long jz_clk_main_round_rate(struct clk *clk, unsigned long rate) -+{ -+ unsigned long parent_rate = jz_clk_pll_get_rate(clk->parent); -+ int div; -+ -+ div = parent_rate / rate; -+ if (div > 32) -+ return parent_rate / 32; -+ else if (div < 1) -+ return parent_rate; -+ -+ div &= (0x3 << (ffs(div) - 1)); -+ -+ return parent_rate / div; -+} -+ -+static unsigned long jz_clk_main_get_rate(struct clk *clk) -+{ -+ struct main_clk *mclk = (struct main_clk *)clk; -+ uint32_t div; -+ -+ div = jz_clk_reg_read(JZ_REG_CLOCK_CTRL); -+ -+ div >>= mclk->div_offset; -+ div &= 0xf; -+ -+ if (div >= ARRAY_SIZE(jz_clk_main_divs)) -+ div = ARRAY_SIZE(jz_clk_main_divs) - 1; -+ -+ return jz_clk_pll_get_rate(clk->parent) / jz_clk_main_divs[div]; -+} -+ -+static int jz_clk_main_set_rate(struct clk *clk, unsigned long rate) -+{ -+ struct main_clk *mclk = (struct main_clk *)clk; -+ int i; -+ int div; -+ unsigned long parent_rate = jz_clk_pll_get_rate(clk->parent); -+ -+ rate = jz_clk_main_round_rate(clk, rate); -+ -+ div = parent_rate / rate; -+ -+ i = (ffs(div) - 1) << 1; -+ if (i > 0 && !(div & BIT(i-1))) -+ i -= 1; -+ -+ jz_clk_reg_write_mask(JZ_REG_CLOCK_CTRL, i << mclk->div_offset, -+ 0xf << mclk->div_offset); -+ -+ return 0; -+} -+ -+static struct clk_ops jz_clk_static_ops = { -+ .get_rate = jz_clk_static_get_rate, -+ .enable = jz_clk_enable_gating, -+ .disable = jz_clk_disable_gating, -+ .is_enabled = jz_clk_is_enabled_gating, -+}; -+ -+static struct static_clk jz_clk_ext = { -+ .clk = { -+ .name = "ext", -+ .gate_bit = JZ4740_CLK_NOT_GATED, -+ .ops = &jz_clk_static_ops, -+ }, -+}; -+ -+static struct clk_ops jz_clk_pll_ops = { -+ .get_rate = jz_clk_static_get_rate, -+}; -+ -+static struct clk jz_clk_pll = { -+ .name = "pll", -+ .parent = &jz_clk_ext.clk, -+ .ops = &jz_clk_pll_ops, -+}; -+ -+static struct clk_ops jz_clk_pll_half_ops = { -+ .get_rate = jz_clk_pll_half_get_rate, -+}; -+ -+static struct clk jz_clk_pll_half = { -+ .name = "pll half", -+ .parent = &jz_clk_pll, -+ .ops = &jz_clk_pll_half_ops, -+}; -+ -+static const struct clk_ops jz_clk_main_ops = { -+ .get_rate = jz_clk_main_get_rate, -+ .set_rate = jz_clk_main_set_rate, -+ .round_rate = jz_clk_main_round_rate, -+}; -+ -+static struct main_clk jz_clk_cpu = { -+ .clk = { -+ .name = "cclk", -+ .parent = &jz_clk_pll, -+ .ops = &jz_clk_main_ops, -+ }, -+ .div_offset = JZ_CLOCK_CTRL_CDIV_OFFSET, -+}; -+ -+static struct main_clk jz_clk_memory = { -+ .clk = { -+ .name = "mclk", -+ .parent = &jz_clk_pll, -+ .ops = &jz_clk_main_ops, -+ }, -+ .div_offset = JZ_CLOCK_CTRL_MDIV_OFFSET, -+}; -+ -+static struct main_clk jz_clk_high_speed_peripheral = { -+ .clk = { -+ .name = "hclk", -+ .parent = &jz_clk_pll, -+ .ops = &jz_clk_main_ops, -+ }, -+ .div_offset = JZ_CLOCK_CTRL_HDIV_OFFSET, -+}; -+ -+ -+static struct main_clk jz_clk_low_speed_peripheral = { -+ .clk = { -+ .name = "pclk", -+ .parent = &jz_clk_pll, -+ .ops = &jz_clk_main_ops, -+ }, -+ .div_offset = JZ_CLOCK_CTRL_PDIV_OFFSET, -+}; -+ -+static const struct clk_ops jz_clk_ko_ops = { -+ .enable = jz_clk_ko_enable, -+ .disable = jz_clk_ko_disable, -+ .is_enabled = jz_clk_ko_is_enabled, -+}; -+ -+static struct clk jz_clk_ko = { -+ .name = "cko", -+ .parent = &jz_clk_memory.clk, -+ .ops = &jz_clk_ko_ops, -+}; -+ -+static int jz_clk_spi_set_parent(struct clk *clk, struct clk *parent) -+{ -+ if (parent == &jz_clk_pll) -+ jz_clk_reg_set_bits(JZ_CLOCK_SPI_SRC_PLL, JZ_REG_CLOCK_SPI); -+ else if (parent == &jz_clk_ext.clk) -+ jz_clk_reg_clear_bits(JZ_CLOCK_SPI_SRC_PLL, JZ_REG_CLOCK_SPI); -+ else -+ return -EINVAL; -+ -+ clk->parent = parent; -+ -+ return 0; -+} -+ -+static int jz_clk_i2s_set_parent(struct clk *clk, struct clk *parent) -+{ -+ if (parent == &jz_clk_pll_half) -+ jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_I2S_SRC_PLL); -+ else if (parent == &jz_clk_ext.clk) -+ jz_clk_reg_clear_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_I2S_SRC_PLL); -+ else -+ return -EINVAL; -+ -+ clk->parent = parent; -+ -+ return 0; -+} -+ -+static int jz_clk_udc_enable(struct clk *clk) -+{ -+ jz_clk_reg_set_bits(JZ_REG_CLOCK_SLEEP_CTRL, -+ JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC); -+ -+ return 0; -+} -+ -+static int jz_clk_udc_disable(struct clk *clk) -+{ -+ jz_clk_reg_clear_bits(JZ_REG_CLOCK_SLEEP_CTRL, -+ JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC); -+ -+ return 0; -+} -+ -+static int jz_clk_udc_is_enabled(struct clk *clk) -+{ -+ return !!(jz_clk_reg_read(JZ_REG_CLOCK_SLEEP_CTRL) & -+ JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC); -+} -+static int jz_clk_udc_set_parent(struct clk *clk, struct clk *parent) -+{ -+ if (parent == &jz_clk_pll_half) -+ jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_UDC_SRC_PLL); -+ else if (parent == &jz_clk_ext.clk) -+ jz_clk_reg_clear_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_UDC_SRC_PLL); -+ else -+ return -EINVAL; -+ -+ clk->parent = parent; -+ -+ return 0; -+} -+ -+static int jz_clk_udc_set_rate(struct clk *clk, unsigned long rate) -+{ -+ int div; -+ -+ if (clk->parent == &jz_clk_ext.clk) -+ return -EINVAL; -+ -+ div = clk_get_rate(clk->parent) / rate - 1; -+ -+ if (div < 0) -+ div = 0; -+ else if (div > 63) -+ div = 63; -+ -+ jz_clk_reg_write_mask(JZ_REG_CLOCK_CTRL, div << JZ_CLOCK_CTRL_UDIV_OFFSET, -+ JZ_CLOCK_CTRL_UDIV_MASK); -+ return 0; -+} -+ -+static unsigned long jz_clk_udc_get_rate(struct clk *clk) -+{ -+ int div; -+ -+ if (clk->parent == &jz_clk_ext.clk) -+ return clk_get_rate(clk->parent); -+ -+ div = (jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_UDIV_MASK); -+ div >>= JZ_CLOCK_CTRL_UDIV_OFFSET; -+ div += 1; -+ -+ return clk_get_rate(clk->parent) / div; -+} -+ -+static unsigned long jz_clk_divided_get_rate(struct clk *clk) -+{ -+ struct divided_clk *dclk = (struct divided_clk *)clk; -+ int div; -+ -+ if (clk->parent == &jz_clk_ext.clk) -+ return clk_get_rate(clk->parent); -+ -+ div = (jz_clk_reg_read(dclk->reg) & dclk->mask) + 1; -+ -+ return clk_get_rate(clk->parent) / div; -+} -+ -+static int jz_clk_divided_set_rate(struct clk *clk, unsigned long rate) -+{ -+ struct divided_clk *dclk = (struct divided_clk *)clk; -+ int div; -+ -+ if (clk->parent == &jz_clk_ext.clk) -+ return -EINVAL; -+ -+ div = clk_get_rate(clk->parent) / rate - 1; -+ -+ if (div < 0) -+ div = 0; -+ else if (div > dclk->mask) -+ div = dclk->mask; -+ -+ jz_clk_reg_write_mask(dclk->reg, div, dclk->mask); -+ -+ return 0; -+} -+ -+static unsigned long jz_clk_ldclk_round_rate(struct clk *clk, unsigned long rate) -+{ -+ int div; -+ unsigned long parent_rate = jz_clk_pll_half_get_rate(clk->parent); -+ -+ if (rate > 150000000) -+ return 150000000; -+ -+ div = parent_rate / rate; -+ if (div < 1) -+ div = 1; -+ else if (div > 32) -+ div = 32; -+ -+ return parent_rate / div; -+} -+ -+static int jz_clk_ldclk_set_rate(struct clk *clk, unsigned long rate) -+{ -+ int div; -+ -+ if (rate > 150000000) -+ return -EINVAL; -+ -+ div = jz_clk_pll_half_get_rate(clk->parent) / rate - 1; -+ if (div < 0) -+ div = 0; -+ else if (div > 31) -+ div = 31; -+ -+ jz_clk_reg_write_mask(JZ_REG_CLOCK_CTRL, div << JZ_CLOCK_CTRL_LDIV_OFFSET, -+ JZ_CLOCK_CTRL_LDIV_MASK); -+ -+ return 0; -+} -+ -+static unsigned long jz_clk_ldclk_get_rate(struct clk *clk) -+{ -+ int div; -+ -+ div = jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_LDIV_MASK; -+ div >>= JZ_CLOCK_CTRL_LDIV_OFFSET; -+ -+ return jz_clk_pll_half_get_rate(clk->parent) / (div + 1); -+} -+ -+static const struct clk_ops jz_clk_ops_ld = { -+ .set_rate = jz_clk_ldclk_set_rate, -+ .get_rate = jz_clk_ldclk_get_rate, -+ .round_rate = jz_clk_ldclk_round_rate, -+ .enable = jz_clk_enable_gating, -+ .disable = jz_clk_disable_gating, -+ .is_enabled = jz_clk_is_enabled_gating, -+}; -+ -+static struct clk jz_clk_ld = { -+ .name = "lcd", -+ .gate_bit = JZ_CLOCK_GATE_LCD, -+ .parent = &jz_clk_pll_half, -+ .ops = &jz_clk_ops_ld, -+}; -+ -+/* TODO: ops!!! */ -+static struct clk jz_clk_cim_mclk = { -+ .name = "cim_mclk", -+ .parent = &jz_clk_high_speed_peripheral.clk, -+}; -+ -+static struct static_clk jz_clk_cim_pclk = { -+ .clk = { -+ .name = "cim_pclk", -+ .gate_bit = JZ_CLOCK_GATE_CIM, -+ .ops = &jz_clk_static_ops, -+ }, -+}; -+ -+static const struct clk_ops jz_clk_i2s_ops = { -+ .set_rate = jz_clk_divided_set_rate, -+ .get_rate = jz_clk_divided_get_rate, -+ .enable = jz_clk_enable_gating, -+ .disable = jz_clk_disable_gating, -+ .is_enabled = jz_clk_is_enabled_gating, -+ .set_parent = jz_clk_i2s_set_parent, -+}; -+ -+static const struct clk_ops jz_clk_spi_ops = { -+ .set_rate = jz_clk_divided_set_rate, -+ .get_rate = jz_clk_divided_get_rate, -+ .enable = jz_clk_enable_gating, -+ .disable = jz_clk_disable_gating, -+ .is_enabled = jz_clk_is_enabled_gating, -+ .set_parent = jz_clk_spi_set_parent, -+}; -+ -+static const struct clk_ops jz_clk_divided_ops = { -+ .set_rate = jz_clk_divided_set_rate, -+ .get_rate = jz_clk_divided_get_rate, -+ .enable = jz_clk_enable_gating, -+ .disable = jz_clk_disable_gating, -+ .is_enabled = jz_clk_is_enabled_gating, -+}; -+ -+static struct divided_clk jz4740_clock_divided_clks[] = { -+ { -+ .clk = { -+ .name = "lcd_pclk", -+ .parent = &jz_clk_pll_half, -+ .gate_bit = JZ4740_CLK_NOT_GATED, -+ .ops = &jz_clk_divided_ops, -+ }, -+ .reg = JZ_REG_CLOCK_LCD, -+ .mask = JZ_CLOCK_LCD_DIV_MASK, -+ }, -+ { -+ .clk = { -+ .name = "i2s", -+ .parent = &jz_clk_ext.clk, -+ .gate_bit = JZ_CLOCK_GATE_I2S, -+ .ops = &jz_clk_i2s_ops, -+ }, -+ .reg = JZ_REG_CLOCK_I2S, -+ .mask = JZ_CLOCK_I2S_DIV_MASK, -+ }, -+ { -+ .clk = { -+ .name = "spi", -+ .parent = &jz_clk_ext.clk, -+ .gate_bit = JZ_CLOCK_GATE_SPI, -+ .ops = &jz_clk_spi_ops, -+ }, -+ .reg = JZ_REG_CLOCK_SPI, -+ .mask = JZ_CLOCK_SPI_DIV_MASK, -+ }, -+ { -+ .clk = { -+ .name = "mmc", -+ .parent = &jz_clk_pll_half, -+ .gate_bit = JZ_CLOCK_GATE_MMC, -+ .ops = &jz_clk_divided_ops, -+ }, -+ .reg = JZ_REG_CLOCK_MMC, -+ .mask = JZ_CLOCK_MMC_DIV_MASK, -+ }, -+ { -+ .clk = { -+ .name = "uhc", -+ .parent = &jz_clk_pll_half, -+ .gate_bit = JZ_CLOCK_GATE_UHC, -+ .ops = &jz_clk_divided_ops, -+ }, -+ .reg = JZ_REG_CLOCK_UHC, -+ .mask = JZ_CLOCK_UHC_DIV_MASK, -+ }, -+}; -+ -+static const struct clk_ops jz_clk_udc_ops = { -+ .set_parent = jz_clk_udc_set_parent, -+ .set_rate = jz_clk_udc_set_rate, -+ .get_rate = jz_clk_udc_get_rate, -+ .enable = jz_clk_udc_enable, -+ .disable = jz_clk_udc_disable, -+ .is_enabled = jz_clk_udc_is_enabled, -+}; -+ -+static const struct clk_ops jz_clk_simple_ops = { -+ .enable = jz_clk_enable_gating, -+ .disable = jz_clk_disable_gating, -+ .is_enabled = jz_clk_is_enabled_gating, -+}; -+ -+static struct clk jz4740_clock_simple_clks[] = { -+ { -+ .name = "udc", -+ .parent = &jz_clk_ext.clk, -+ .ops = &jz_clk_udc_ops, -+ }, -+ { -+ .name = "uart0", -+ .parent = &jz_clk_ext.clk, -+ .gate_bit = JZ_CLOCK_GATE_UART0, -+ .ops = &jz_clk_simple_ops, -+ }, -+ { -+ .name = "uart1", -+ .parent = &jz_clk_ext.clk, -+ .gate_bit = JZ_CLOCK_GATE_UART1, -+ .ops = &jz_clk_simple_ops, -+ }, -+ { -+ .name = "dma", -+ .parent = &jz_clk_high_speed_peripheral.clk, -+ .gate_bit = JZ_CLOCK_GATE_UART0, -+ .ops = &jz_clk_simple_ops, -+ }, -+ { -+ .name = "ipu", -+ .parent = &jz_clk_high_speed_peripheral.clk, -+ .gate_bit = JZ_CLOCK_GATE_IPU, -+ .ops = &jz_clk_simple_ops, -+ }, -+ { -+ .name = "adc", -+ .parent = &jz_clk_ext.clk, -+ .gate_bit = JZ_CLOCK_GATE_ADC, -+ .ops = &jz_clk_simple_ops, -+ }, -+ { -+ .name = "i2c", -+ .parent = &jz_clk_ext.clk, -+ .gate_bit = JZ_CLOCK_GATE_I2C, -+ .ops = &jz_clk_simple_ops, -+ }, -+ { -+ .name = "aic", -+ .parent = &jz_clk_ext.clk, -+ .gate_bit = JZ_CLOCK_GATE_AIC, -+ .ops = &jz_clk_simple_ops, -+ }, -+}; -+ -+static struct static_clk jz_clk_rtc = { -+ .clk = { -+ .name = "rtc", -+ .gate_bit = JZ_CLOCK_GATE_RTC, -+ .ops = &jz_clk_static_ops, -+ }, -+ .rate = 32768, -+}; -+ -+int clk_enable(struct clk *clk) -+{ -+ if (!clk->ops->enable) -+ return -EINVAL; -+ -+ return clk->ops->enable(clk); -+} -+EXPORT_SYMBOL_GPL(clk_enable); -+ -+void clk_disable(struct clk *clk) -+{ -+ if (clk->ops->disable) -+ clk->ops->disable(clk); -+} -+EXPORT_SYMBOL_GPL(clk_disable); -+ -+int clk_is_enabled(struct clk *clk) -+{ -+ if (clk->ops->is_enabled) -+ return clk->ops->is_enabled(clk); -+ -+ return 1; -+} -+ -+unsigned long clk_get_rate(struct clk *clk) -+{ -+ if (clk->ops->get_rate) -+ return clk->ops->get_rate(clk); -+ if (clk->parent) -+ return clk_get_rate(clk->parent); -+ -+ return -EINVAL; -+} -+EXPORT_SYMBOL_GPL(clk_get_rate); -+ -+int clk_set_rate(struct clk *clk, unsigned long rate) -+{ -+ if (!clk->ops->set_rate) -+ return -EINVAL; -+ return clk->ops->set_rate(clk, rate); -+} -+EXPORT_SYMBOL_GPL(clk_set_rate); -+ -+long clk_round_rate(struct clk *clk, unsigned long rate) -+{ -+ if (clk->ops->round_rate) -+ return clk->ops->round_rate(clk, rate); -+ -+ return -EINVAL; -+} -+EXPORT_SYMBOL_GPL(clk_round_rate); -+ -+int clk_set_parent(struct clk *clk, struct clk *parent) -+{ -+ int ret; -+ -+ if (!clk->ops->set_parent) -+ return -EINVAL; -+ -+ clk_disable(clk); -+ ret = clk->ops->set_parent(clk, parent); -+ clk_enable(clk); -+ -+ jz4740_clock_debugfs_update_parent(clk); -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(clk_set_parent); -+ -+struct clk *clk_get(struct device *dev, const char *name) -+{ -+ struct clk *clk; -+ -+ list_for_each_entry(clk, &jz_clocks, list) { -+ if (strcmp(clk->name, name) == 0) -+ return clk; -+ } -+ return ERR_PTR(-ENOENT); -+} -+EXPORT_SYMBOL_GPL(clk_get); -+ -+void clk_put(struct clk *clk) -+{ -+} -+EXPORT_SYMBOL_GPL(clk_put); -+ -+ -+static inline void clk_add(struct clk *clk) -+{ -+ list_add_tail(&clk->list, &jz_clocks); -+ -+ jz4740_clock_debugfs_add_clk(clk); -+} -+ -+static void clk_register_clks(void) -+{ -+ size_t i; -+ -+ clk_add(&jz_clk_ext.clk); -+ clk_add(&jz_clk_pll); -+ clk_add(&jz_clk_pll_half); -+ clk_add(&jz_clk_cpu.clk); -+ clk_add(&jz_clk_high_speed_peripheral.clk); -+ clk_add(&jz_clk_low_speed_peripheral.clk); -+ clk_add(&jz_clk_ko); -+ clk_add(&jz_clk_ld); -+ clk_add(&jz_clk_cim_mclk); -+ clk_add(&jz_clk_cim_pclk.clk); -+ clk_add(&jz_clk_rtc.clk); -+ -+ for (i = 0; i < ARRAY_SIZE(jz4740_clock_divided_clks); ++i) -+ clk_add(&jz4740_clock_divided_clks[i].clk); -+ -+ for (i = 0; i < ARRAY_SIZE(jz4740_clock_simple_clks); ++i) -+ clk_add(&jz4740_clock_simple_clks[i]); -+} -+ -+void jz4740_clock_set_wait_mode(enum jz4740_wait_mode mode) -+{ -+ switch (mode) { -+ case JZ4740_WAIT_MODE_IDLE: -+ jz_clk_reg_clear_bits(JZ_REG_CLOCK_LOW_POWER, JZ_CLOCK_LOW_POWER_MODE_SLEEP); -+ break; -+ case JZ4740_WAIT_MODE_SLEEP: -+ jz_clk_reg_set_bits(JZ_REG_CLOCK_LOW_POWER, JZ_CLOCK_LOW_POWER_MODE_SLEEP); -+ break; -+ } -+} -+ -+void jz4740_clock_udc_disable_auto_suspend(void) -+{ -+ jz_clk_reg_clear_bits(JZ_REG_CLOCK_GATE, JZ_CLOCK_GATE_UDC); -+} -+EXPORT_SYMBOL_GPL(jz4740_clock_udc_disable_auto_suspend); -+ -+void jz4740_clock_udc_enable_auto_suspend(void) -+{ -+ jz_clk_reg_set_bits(JZ_REG_CLOCK_GATE, JZ_CLOCK_GATE_UDC); -+} -+EXPORT_SYMBOL_GPL(jz4740_clock_udc_enable_auto_suspend); -+ -+void jz4740_clock_suspend(void) -+{ -+ jz_clk_reg_set_bits(JZ_REG_CLOCK_GATE, -+ JZ_CLOCK_GATE_TCU | JZ_CLOCK_GATE_DMAC | JZ_CLOCK_GATE_UART0); -+ -+ jz_clk_reg_clear_bits(JZ_REG_CLOCK_PLL, JZ_CLOCK_PLL_ENABLED); -+} -+ -+void jz4740_clock_resume(void) -+{ -+ uint32_t pll; -+ -+ jz_clk_reg_set_bits(JZ_REG_CLOCK_PLL, JZ_CLOCK_PLL_ENABLED); -+ -+ do { -+ pll = jz_clk_reg_read(JZ_REG_CLOCK_PLL); -+ } while (!(pll & JZ_CLOCK_PLL_STABLE)); -+ -+ jz_clk_reg_clear_bits(JZ_REG_CLOCK_GATE, -+ JZ_CLOCK_GATE_TCU | JZ_CLOCK_GATE_DMAC | JZ_CLOCK_GATE_UART0); -+} -+ -+int jz4740_clock_init(void) -+{ -+ uint32_t val; -+ -+ jz_clock_base = ioremap(CPHYSADDR(JZ4740_CPM_BASE_ADDR), 0x100); -+ if (!jz_clock_base) -+ return -EBUSY; -+ -+ spin_lock_init(&jz_clock_lock); -+ -+ jz_clk_ext.rate = jz4740_clock_bdata.ext_rate; -+ jz_clk_rtc.rate = jz4740_clock_bdata.rtc_rate; -+ -+ val = jz_clk_reg_read(JZ_REG_CLOCK_SPI); -+ -+ if (val & JZ_CLOCK_SPI_SRC_PLL) -+ jz4740_clock_divided_clks[1].clk.parent = &jz_clk_pll_half; -+ -+ val = jz_clk_reg_read(JZ_REG_CLOCK_CTRL); -+ -+ if (val & JZ_CLOCK_CTRL_I2S_SRC_PLL) -+ jz4740_clock_divided_clks[0].clk.parent = &jz_clk_pll_half; -+ -+ if (val & JZ_CLOCK_CTRL_UDC_SRC_PLL) -+ jz4740_clock_simple_clks[0].parent = &jz_clk_pll_half; -+ -+ jz4740_clock_debugfs_init(); -+ -+ clk_register_clks(); -+ -+ return 0; -+} -diff --git a/arch/mips/jz4740/clock.h b/arch/mips/jz4740/clock.h -new file mode 100644 -index 0000000..96010a4 ---- /dev/null -+++ b/arch/mips/jz4740/clock.h -@@ -0,0 +1,75 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * JZ4740 SoC clock support -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#ifndef __JZ4740_CLOCK_H__ -+#define __JZ4740_CLOCK_H__ -+ -+struct jz4740_clock_board_data { -+ unsigned long ext_rate; -+ unsigned long rtc_rate; -+}; -+ -+extern struct jz4740_clock_board_data jz4740_clock_bdata; -+ -+int jz4740_clock_init(void); -+void jz4740_clock_suspend(void); -+void jz4740_clock_resume(void); -+ -+struct clk; -+ -+struct clk_ops { -+ unsigned long (*get_rate)(struct clk *clk); -+ unsigned long (*round_rate)(struct clk *clk, unsigned long rate); -+ int (*set_rate)(struct clk *clk, unsigned long rate); -+ int (*enable)(struct clk *clk); -+ int (*disable)(struct clk *clk); -+ int (*is_enabled)(struct clk *clk); -+ -+ int (*set_parent)(struct clk *clk, struct clk *parent); -+ -+}; -+ -+struct clk { -+ const char *name; -+ struct clk *parent; -+ -+ uint32_t gate_bit; -+ -+ const struct clk_ops *ops; -+ -+ struct list_head list; -+ -+#ifdef CONFIG_DEBUG_FS -+ struct dentry *debugfs_entry; -+ struct dentry *debugfs_parent_entry; -+#endif -+ -+}; -+ -+#define JZ4740_CLK_NOT_GATED ((uint32_t)-1) -+ -+int clk_is_enabled(struct clk *clk); -+ -+#ifdef CONFIG_DEBUG_FS -+void jz4740_clock_debugfs_init(void); -+void jz4740_clock_debugfs_add_clk(struct clk *clk); -+void jz4740_clock_debugfs_update_parent(struct clk *clk); -+#else -+static inline void jz4740_clock_debugfs_init(void) {}; -+static inline void jz4740_clock_debugfs_add_clk(struct clk *clk) {}; -+static inline void jz4740_clock_debugfs_update_parent(struct clk *clk) {}; -+#endif -+ -+#endif -diff --git a/arch/mips/jz4740/dma.c b/arch/mips/jz4740/dma.c -new file mode 100644 -index 0000000..b712afc ---- /dev/null -+++ b/arch/mips/jz4740/dma.c -@@ -0,0 +1,336 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * JZ4740 SoC DMA support -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#define JZ_REG_DMA_SRC_ADDR(x) (0x00 + (x) * 0x20) -+#define JZ_REG_DMA_DST_ADDR(x) (0x04 + (x) * 0x20) -+#define JZ_REG_DMA_TRANSFER_COUNT(x) (0x08 + (x) * 0x20) -+#define JZ_REG_DMA_REQ_TYPE(x) (0x0C + (x) * 0x20) -+#define JZ_REG_DMA_STATUS_CTRL(x) (0x10 + (x) * 0x20) -+#define JZ_REG_DMA_CMD(x) (0x14 + (x) * 0x20) -+#define JZ_REG_DMA_DESC_ADDR(x) (0x18 + (x) * 0x20) -+ -+#define JZ_REG_DMA_CTRL 0x300 -+#define JZ_REG_DMA_IRQ 0x304 -+#define JZ_REG_DMA_DOORBELL 0x308 -+#define JZ_REG_DMA_DOORBELL_SET 0x30C -+ -+#define JZ_DMA_STATUS_CTRL_NO_DESC BIT(31) -+#define JZ_DMA_STATUS_CTRL_DESC_INV BIT(6) -+#define JZ_DMA_STATUS_CTRL_ADDR_ERR BIT(4) -+#define JZ_DMA_STATUS_CTRL_TRANSFER_DONE BIT(3) -+#define JZ_DMA_STATUS_CTRL_HALT BIT(2) -+#define JZ_DMA_STATUS_CTRL_COUNT_TERMINATE BIT(1) -+#define JZ_DMA_STATUS_CTRL_ENABLE BIT(0) -+ -+#define JZ_DMA_CMD_SRC_INC BIT(23) -+#define JZ_DMA_CMD_DST_INC BIT(22) -+#define JZ_DMA_CMD_RDIL_MASK (0xf << 16) -+#define JZ_DMA_CMD_SRC_WIDTH_MASK (0x3 << 14) -+#define JZ_DMA_CMD_DST_WIDTH_MASK (0x3 << 12) -+#define JZ_DMA_CMD_INTERVAL_LENGTH_MASK (0x7 << 8) -+#define JZ_DMA_CMD_BLOCK_MODE BIT(7) -+#define JZ_DMA_CMD_DESC_VALID BIT(4) -+#define JZ_DMA_CMD_DESC_VALID_MODE BIT(3) -+#define JZ_DMA_CMD_VALID_IRQ_ENABLE BIT(2) -+#define JZ_DMA_CMD_TRANSFER_IRQ_ENABLE BIT(1) -+#define JZ_DMA_CMD_LINK_ENABLE BIT(0) -+ -+#define JZ_DMA_CMD_FLAGS_OFFSET 22 -+#define JZ_DMA_CMD_RDIL_OFFSET 16 -+#define JZ_DMA_CMD_SRC_WIDTH_OFFSET 14 -+#define JZ_DMA_CMD_DST_WIDTH_OFFSET 12 -+#define JZ_DMA_CMD_TRANSFER_SIZE_OFFSET 8 -+#define JZ_DMA_CMD_MODE_OFFSET 7 -+ -+#define JZ_DMA_CTRL_PRIORITY_MASK (0x3 << 8) -+#define JZ_DMA_CTRL_HALT BIT(3) -+#define JZ_DMA_CTRL_ADDRESS_ERROR BIT(2) -+#define JZ_DMA_CTRL_ENABLE BIT(0) -+ -+ -+static void __iomem *jz4740_dma_base; -+static spinlock_t jz4740_dma_lock; -+ -+static inline uint32_t jz4740_dma_read(size_t reg) -+{ -+ return readl(jz4740_dma_base + reg); -+} -+ -+static inline void jz4740_dma_write(size_t reg, uint32_t val) -+{ -+ writel(val, jz4740_dma_base + reg); -+} -+ -+static inline void jz4740_dma_write_mask(size_t reg, uint32_t val, uint32_t mask) -+{ -+ uint32_t val2; -+ val2 = jz4740_dma_read(reg); -+ val2 &= ~mask; -+ val2 |= val; -+ jz4740_dma_write(reg, val2); -+} -+ -+struct jz4740_dma_chan { -+ unsigned int id; -+ void *dev; -+ const char *name; -+ -+ enum jz4740_dma_flags flags; -+ uint32_t transfer_shift; -+ -+ jz4740_dma_complete_callback_t complete_cb; -+ -+ unsigned used:1; -+}; -+ -+#define JZ4740_DMA_CHANNEL(_id) { .id = _id } -+ -+struct jz4740_dma_chan jz4740_dma_channels[] = { -+ JZ4740_DMA_CHANNEL(0), -+ JZ4740_DMA_CHANNEL(1), -+ JZ4740_DMA_CHANNEL(2), -+ JZ4740_DMA_CHANNEL(3), -+ JZ4740_DMA_CHANNEL(4), -+ JZ4740_DMA_CHANNEL(5), -+}; -+ -+struct jz4740_dma_chan *jz4740_dma_request(void *dev, const char *name) -+{ -+ unsigned int i; -+ struct jz4740_dma_chan *dma = NULL; -+ -+ spin_lock(&jz4740_dma_lock); -+ -+ for (i = 0; i < ARRAY_SIZE(jz4740_dma_channels); ++i) { -+ if (!jz4740_dma_channels[i].used) { -+ dma = &jz4740_dma_channels[i]; -+ dma->used = 1; -+ break; -+ } -+ } -+ -+ spin_unlock(&jz4740_dma_lock); -+ -+ if (!dma) -+ return NULL; -+ -+ dma->dev = dev; -+ dma->name = name; -+ -+ return dma; -+} -+EXPORT_SYMBOL_GPL(jz4740_dma_request); -+ -+void jz4740_dma_configure(struct jz4740_dma_chan *dma, -+ const struct jz4740_dma_config *config) -+{ -+ uint32_t cmd; -+ -+ switch (config->transfer_size) { -+ case JZ4740_DMA_TRANSFER_SIZE_2BYTE: -+ dma->transfer_shift = 1; -+ break; -+ case JZ4740_DMA_TRANSFER_SIZE_4BYTE: -+ dma->transfer_shift = 2; -+ break; -+ case JZ4740_DMA_TRANSFER_SIZE_16BYTE: -+ dma->transfer_shift = 4; -+ break; -+ case JZ4740_DMA_TRANSFER_SIZE_32BYTE: -+ dma->transfer_shift = 5; -+ break; -+ default: -+ dma->transfer_shift = 0; -+ break; -+ } -+ -+ cmd = config->flags << JZ_DMA_CMD_FLAGS_OFFSET; -+ cmd |= config->src_width << JZ_DMA_CMD_SRC_WIDTH_OFFSET; -+ cmd |= config->dst_width << JZ_DMA_CMD_DST_WIDTH_OFFSET; -+ cmd |= config->transfer_size << JZ_DMA_CMD_TRANSFER_SIZE_OFFSET; -+ cmd |= config->mode << JZ_DMA_CMD_MODE_OFFSET; -+ cmd |= JZ_DMA_CMD_TRANSFER_IRQ_ENABLE; -+ -+ jz4740_dma_write(JZ_REG_DMA_CMD(dma->id), cmd); -+ jz4740_dma_write(JZ_REG_DMA_STATUS_CTRL(dma->id), 0); -+ jz4740_dma_write(JZ_REG_DMA_REQ_TYPE(dma->id), config->request_type); -+} -+EXPORT_SYMBOL_GPL(jz4740_dma_configure); -+ -+void jz4740_dma_set_src_addr(struct jz4740_dma_chan *dma, dma_addr_t src) -+{ -+ jz4740_dma_write(JZ_REG_DMA_SRC_ADDR(dma->id), src); -+} -+EXPORT_SYMBOL_GPL(jz4740_dma_set_src_addr); -+ -+void jz4740_dma_set_dst_addr(struct jz4740_dma_chan *dma, dma_addr_t dst) -+{ -+ jz4740_dma_write(JZ_REG_DMA_DST_ADDR(dma->id), dst); -+} -+EXPORT_SYMBOL_GPL(jz4740_dma_set_dst_addr); -+ -+void jz4740_dma_set_transfer_count(struct jz4740_dma_chan *dma, uint32_t count) -+{ -+ count >>= dma->transfer_shift; -+ jz4740_dma_write(JZ_REG_DMA_TRANSFER_COUNT(dma->id), count); -+} -+EXPORT_SYMBOL_GPL(jz4740_dma_set_transfer_count); -+ -+void jz4740_dma_set_complete_cb(struct jz4740_dma_chan *dma, -+ jz4740_dma_complete_callback_t cb) -+{ -+ dma->complete_cb = cb; -+} -+EXPORT_SYMBOL_GPL(jz4740_dma_set_complete_cb); -+ -+void jz4740_dma_free(struct jz4740_dma_chan *dma) -+{ -+ dma->dev = NULL; -+ dma->complete_cb = NULL; -+ dma->used = 0; -+} -+EXPORT_SYMBOL_GPL(jz4740_dma_free); -+ -+void jz4740_dma_enable(struct jz4740_dma_chan *dma) -+{ -+ jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), -+ JZ_DMA_STATUS_CTRL_NO_DESC | JZ_DMA_STATUS_CTRL_ENABLE, -+ JZ_DMA_STATUS_CTRL_HALT | JZ_DMA_STATUS_CTRL_NO_DESC | -+ JZ_DMA_STATUS_CTRL_ENABLE); -+ -+ jz4740_dma_write_mask(JZ_REG_DMA_CTRL, -+ JZ_DMA_CTRL_ENABLE, -+ JZ_DMA_CTRL_HALT | JZ_DMA_CTRL_ENABLE); -+} -+EXPORT_SYMBOL_GPL(jz4740_dma_enable); -+ -+void jz4740_dma_disable(struct jz4740_dma_chan *dma) -+{ -+ jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0, -+ JZ_DMA_STATUS_CTRL_ENABLE); -+} -+EXPORT_SYMBOL_GPL(jz4740_dma_disable); -+ -+uint32_t jz4740_dma_get_residue(const struct jz4740_dma_chan *dma) -+{ -+ uint32_t residue; -+ residue = jz4740_dma_read(JZ_REG_DMA_TRANSFER_COUNT(dma->id)); -+ return residue << dma->transfer_shift; -+} -+EXPORT_SYMBOL_GPL(jz4740_dma_get_residue); -+ -+static void jz4740_dma_chan_irq(struct jz4740_dma_chan *dma) -+{ -+ uint32_t status; -+ -+ status = jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id)); -+ -+ jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0, -+ JZ_DMA_STATUS_CTRL_ENABLE | JZ_DMA_STATUS_CTRL_TRANSFER_DONE); -+ -+ if (dma->complete_cb) -+ dma->complete_cb(dma, 0, dma->dev); -+} -+ -+static irqreturn_t jz4740_dma_irq(int irq, void *dev_id) -+{ -+ uint32_t irq_status; -+ unsigned int i; -+ -+ irq_status = readl(jz4740_dma_base + JZ_REG_DMA_IRQ); -+ -+ for (i = 0; i < 6; ++i) { -+ if (irq_status & (1 << i)) -+ jz4740_dma_chan_irq(&jz4740_dma_channels[i]); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+#if 0 -+static struct jz4740_dma_config dma_test_config = { -+ .src_width = JZ4740_DMA_WIDTH_32BIT, -+ .dst_width = JZ4740_DMA_WIDTH_32BIT, -+ .transfer_size = JZ4740_DMA_TRANSFER_SIZE_4BYTE, -+ .request_type = JZ4740_DMA_TYPE_AUTO_REQUEST, -+ .flags = JZ4740_DMA_SRC_AUTOINC | JZ4740_DMA_DST_AUTOINC, -+ .mode = JZ4740_DMA_MODE_BLOCK, -+}; -+ -+static void jz4740_dma_test(void) -+{ -+ uint32_t *buf1, *buf2; -+ dma_addr_t addr1, addr2; -+ struct jz4740_dma_chan *dma = jz4740_dma_request(NULL, "dma test"); -+ int i; -+ -+ printk("STARTING DMA TEST\n"); -+ -+ buf1 = dma_alloc_coherent(NULL, -+ 0x1000, -+ &addr1, GFP_KERNEL); -+ buf2 = dma_alloc_coherent(NULL, -+ 0x1000, -+ &addr2, GFP_KERNEL); -+ -+ for (i = 0; i < 0x400; ++i) -+ buf1[i] = i; -+ -+ -+ jz4740_dma_configure(dma, &dma_test_config); -+ jz4740_dma_set_src_addr(dma, addr1); -+ jz4740_dma_set_dst_addr(dma, addr2); -+ jz4740_dma_set_transfer_count(dma, 0x1000); -+ -+ jz4740_dma_enable(dma); -+ mdelay(2000); -+ -+ for (i = 0; i < 0x400; ++i) { -+ if (buf2[i] != i) -+ printk("OH MY GOD: %x %x\n", i, buf2[i]); -+ } -+ -+ printk("DMA TEST DONE\n"); -+} -+#endif -+ -+static int jz4740_dma_init(void) -+{ -+ unsigned int ret; -+ -+ jz4740_dma_base = ioremap(CPHYSADDR(JZ4740_DMAC_BASE_ADDR), 0x400); -+ -+ if (!jz4740_dma_base) -+ return -EBUSY; -+ -+ spin_lock_init(&jz4740_dma_lock); -+ -+ ret = request_irq(JZ4740_IRQ_DMAC, jz4740_dma_irq, 0, "DMA", NULL); -+ -+ if (ret) -+ printk(KERN_ERR "JZ4740 DMA: Failed to request irq: %d\n", ret); -+ -+ return ret; -+} -+arch_initcall(jz4740_dma_init); -diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c -new file mode 100644 -index 0000000..84f4ef9 ---- /dev/null -+++ b/arch/mips/jz4740/gpio.c -@@ -0,0 +1,598 @@ -+/* -+ * Copyright (C) 2009-2010, Lars-Peter Clausen -+ * JZ4740 platform GPIO support -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+ -+#define JZ4740_GPIO_BASE_A (32*0) -+#define JZ4740_GPIO_BASE_B (32*1) -+#define JZ4740_GPIO_BASE_C (32*2) -+#define JZ4740_GPIO_BASE_D (32*3) -+ -+#define JZ4740_GPIO_NUM_A 32 -+#define JZ4740_GPIO_NUM_B 32 -+#define JZ4740_GPIO_NUM_C 31 -+#define JZ4740_GPIO_NUM_D 32 -+ -+#define JZ4740_IRQ_GPIO_BASE_A (JZ4740_IRQ_GPIO(0) + JZ4740_GPIO_BASE_A) -+#define JZ4740_IRQ_GPIO_BASE_B (JZ4740_IRQ_GPIO(0) + JZ4740_GPIO_BASE_B) -+#define JZ4740_IRQ_GPIO_BASE_C (JZ4740_IRQ_GPIO(0) + JZ4740_GPIO_BASE_C) -+#define JZ4740_IRQ_GPIO_BASE_D (JZ4740_IRQ_GPIO(0) + JZ4740_GPIO_BASE_D) -+ -+#define JZ4740_IRQ_GPIO_A(num) (JZ4740_IRQ_GPIO_BASE_A + num) -+#define JZ4740_IRQ_GPIO_B(num) (JZ4740_IRQ_GPIO_BASE_B + num) -+#define JZ4740_IRQ_GPIO_C(num) (JZ4740_IRQ_GPIO_BASE_C + num) -+#define JZ4740_IRQ_GPIO_D(num) (JZ4740_IRQ_GPIO_BASE_D + num) -+ -+#define JZ_REG_GPIO_PIN 0x00 -+#define JZ_REG_GPIO_DATA 0x10 -+#define JZ_REG_GPIO_DATA_SET 0x14 -+#define JZ_REG_GPIO_DATA_CLEAR 0x18 -+#define JZ_REG_GPIO_MASK 0x20 -+#define JZ_REG_GPIO_MASK_SET 0x24 -+#define JZ_REG_GPIO_MASK_CLEAR 0x28 -+#define JZ_REG_GPIO_PULL 0x30 -+#define JZ_REG_GPIO_PULL_SET 0x34 -+#define JZ_REG_GPIO_PULL_CLEAR 0x38 -+#define JZ_REG_GPIO_FUNC 0x40 -+#define JZ_REG_GPIO_FUNC_SET 0x44 -+#define JZ_REG_GPIO_FUNC_CLEAR 0x48 -+#define JZ_REG_GPIO_SELECT 0x50 -+#define JZ_REG_GPIO_SELECT_SET 0x54 -+#define JZ_REG_GPIO_SELECT_CLEAR 0x58 -+#define JZ_REG_GPIO_DIRECTION 0x60 -+#define JZ_REG_GPIO_DIRECTION_SET 0x64 -+#define JZ_REG_GPIO_DIRECTION_CLEAR 0x68 -+#define JZ_REG_GPIO_TRIGGER 0x70 -+#define JZ_REG_GPIO_TRIGGER_SET 0x74 -+#define JZ_REG_GPIO_TRIGGER_CLEAR 0x78 -+#define JZ_REG_GPIO_FLAG 0x80 -+#define JZ_REG_GPIO_FLAG_CLEAR 0x14 -+ -+ -+#define GPIO_TO_BIT(gpio) BIT(gpio & 0x1f) -+#define GPIO_TO_REG(gpio, reg) (gpio_to_jz_gpio_chip(gpio)->base + (reg)) -+#define CHIP_TO_REG(chip, reg) (gpio_chip_to_jz_gpio_chip(chip)->base + (reg)) -+ -+struct jz_gpio_chip { -+ unsigned int irq; -+ unsigned int irq_base; -+ uint32_t wakeup; -+ uint32_t suspend_mask; -+ uint32_t edge_trigger_both; -+ -+ void __iomem *base; -+ -+ spinlock_t lock; -+ -+ struct gpio_chip gpio_chip; -+ struct irq_chip irq_chip; -+ struct sys_device sysdev; -+}; -+ -+ -+static struct jz_gpio_chip jz4740_gpio_chips[]; -+ -+static inline struct jz_gpio_chip *gpio_to_jz_gpio_chip(unsigned int gpio) -+{ -+ return &jz4740_gpio_chips[gpio >> 5]; -+} -+ -+static inline struct jz_gpio_chip *gpio_chip_to_jz_gpio_chip(struct gpio_chip *gpio_chip) -+{ -+ return container_of(gpio_chip, struct jz_gpio_chip, gpio_chip); -+} -+ -+static inline struct jz_gpio_chip *irq_to_jz_gpio_chip(unsigned int irq) -+{ -+ return get_irq_chip_data(irq); -+} -+ -+static inline void jz_gpio_write_bit(unsigned int gpio, unsigned int reg) -+{ -+ writel(GPIO_TO_BIT(gpio), GPIO_TO_REG(gpio, reg)); -+} -+ -+int jz_gpio_set_function(int gpio, enum jz_gpio_function function) -+{ -+ if (function == JZ_GPIO_FUNC_NONE) { -+ jz_gpio_write_bit(gpio, JZ_REG_GPIO_FUNC_CLEAR); -+ jz_gpio_write_bit(gpio, JZ_REG_GPIO_SELECT_CLEAR); -+ jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_CLEAR); -+ } else { -+ jz_gpio_write_bit(gpio, JZ_REG_GPIO_FUNC_SET); -+ jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_CLEAR); -+ switch (function) { -+ case JZ_GPIO_FUNC1: -+ jz_gpio_write_bit(gpio, JZ_REG_GPIO_SELECT_CLEAR); -+ break; -+ case JZ_GPIO_FUNC3: -+ jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_SET); -+ case JZ_GPIO_FUNC2: /* Falltrough */ -+ jz_gpio_write_bit(gpio, JZ_REG_GPIO_SELECT_SET); -+ break; -+ default: -+ BUG(); -+ break; -+ } -+ } -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(jz_gpio_set_function); -+ -+int jz_gpio_bulk_request(const struct jz_gpio_bulk_request *request, size_t num) -+{ -+ size_t i; -+ int ret; -+ -+ for (i = 0; i < num; ++i, ++request) { -+ ret = gpio_request(request->gpio, request->name); -+ if (ret) -+ goto err; -+ jz_gpio_set_function(request->gpio, request->function); -+ } -+ -+ return 0; -+ -+err: -+ for (--request; i > 0; --i, --request) { -+ gpio_free(request->gpio); -+ jz_gpio_set_function(request->gpio, JZ_GPIO_FUNC_NONE); -+ } -+ -+ return ret; -+} -+EXPORT_SYMBOL_GPL(jz_gpio_bulk_request); -+ -+void jz_gpio_bulk_free(const struct jz_gpio_bulk_request *request, size_t num) -+{ -+ size_t i; -+ -+ for (i = 0; i < num; ++i, ++request) { -+ gpio_free(request->gpio); -+ jz_gpio_set_function(request->gpio, JZ_GPIO_FUNC_NONE); -+ } -+ -+} -+EXPORT_SYMBOL_GPL(jz_gpio_bulk_free); -+ -+void jz_gpio_bulk_suspend(const struct jz_gpio_bulk_request *request, size_t num) -+{ -+ size_t i; -+ -+ for (i = 0; i < num; ++i, ++request) { -+ jz_gpio_set_function(request->gpio, JZ_GPIO_FUNC_NONE); -+ jz_gpio_write_bit(request->gpio, JZ_REG_GPIO_DIRECTION_CLEAR); -+ jz_gpio_write_bit(request->gpio, JZ_REG_GPIO_PULL_SET); -+ } -+} -+EXPORT_SYMBOL_GPL(jz_gpio_bulk_suspend); -+ -+void jz_gpio_bulk_resume(const struct jz_gpio_bulk_request *request, size_t num) -+{ -+ size_t i; -+ -+ for (i = 0; i < num; ++i, ++request) -+ jz_gpio_set_function(request->gpio, request->function); -+} -+EXPORT_SYMBOL_GPL(jz_gpio_bulk_resume); -+ -+void jz_gpio_enable_pullup(unsigned gpio) -+{ -+ jz_gpio_write_bit(gpio, JZ_REG_GPIO_PULL_CLEAR); -+} -+EXPORT_SYMBOL_GPL(jz_gpio_enable_pullup); -+ -+void jz_gpio_disable_pullup(unsigned gpio) -+{ -+ jz_gpio_write_bit(gpio, JZ_REG_GPIO_PULL_SET); -+} -+EXPORT_SYMBOL_GPL(jz_gpio_disable_pullup); -+ -+static int jz_gpio_get_value(struct gpio_chip *chip, unsigned gpio) -+{ -+ return !!(readl(CHIP_TO_REG(chip, JZ_REG_GPIO_PIN)) & BIT(gpio)); -+} -+ -+static void jz_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value) -+{ -+ uint32_t __iomem *reg = CHIP_TO_REG(chip, JZ_REG_GPIO_DATA_SET); -+ reg += !value; -+ writel(BIT(gpio), reg); -+} -+ -+static int jz_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, -+ int value) -+{ -+ writel(BIT(gpio), CHIP_TO_REG(chip, JZ_REG_GPIO_DIRECTION_SET)); -+ jz_gpio_set_value(chip, gpio, value); -+ -+ return 0; -+} -+ -+static int jz_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) -+{ -+ writel(BIT(gpio), CHIP_TO_REG(chip, JZ_REG_GPIO_DIRECTION_CLEAR)); -+ -+ return 0; -+} -+ -+int jz_gpio_port_direction_input(int port, uint32_t mask) -+{ -+ writel(mask, GPIO_TO_REG(port, JZ_REG_GPIO_DIRECTION_CLEAR)); -+ -+ return 0; -+} -+EXPORT_SYMBOL(jz_gpio_port_direction_input); -+ -+int jz_gpio_port_direction_output(int port, uint32_t mask) -+{ -+ writel(mask, GPIO_TO_REG(port, JZ_REG_GPIO_DIRECTION_SET)); -+ -+ return 0; -+} -+EXPORT_SYMBOL(jz_gpio_port_direction_output); -+ -+void jz_gpio_port_set_value(int port, uint32_t value, uint32_t mask) -+{ -+ writel(~value & mask, GPIO_TO_REG(port, JZ_REG_GPIO_DATA_CLEAR)); -+ writel(value & mask, GPIO_TO_REG(port, JZ_REG_GPIO_DATA_SET)); -+} -+EXPORT_SYMBOL(jz_gpio_port_set_value); -+ -+uint32_t jz_gpio_port_get_value(int port, uint32_t mask) -+{ -+ uint32_t value = readl(GPIO_TO_REG(port, JZ_REG_GPIO_PIN)); -+ -+ return value & mask; -+} -+EXPORT_SYMBOL(jz_gpio_port_get_value); -+ -+ -+#define IRQ_TO_GPIO(irq) (irq - JZ4740_IRQ_GPIO(0)) -+#define IRQ_TO_BIT(irq) BIT(IRQ_TO_GPIO(irq) & 0x1f) -+ -+#define IRQ_TO_REG(irq, reg) GPIO_TO_REG(IRQ_TO_GPIO(irq), reg) -+ -+static void jz_gpio_irq_demux_handler(unsigned int irq, struct irq_desc *desc) -+{ -+ uint32_t flag; -+ unsigned int gpio_irq; -+ unsigned int gpio_bank; -+ struct jz_gpio_chip *chip = get_irq_desc_data(desc); -+ -+ gpio_bank = JZ4740_IRQ_GPIO0 - irq; -+ -+ flag = readl(chip->base + JZ_REG_GPIO_FLAG); -+ -+ gpio_irq = ffs(flag) - 1; -+ -+ if (chip->edge_trigger_both & BIT(gpio_irq)) { -+ uint32_t value = readl(chip->base + JZ_REG_GPIO_PIN); -+ if (value & BIT(gpio_irq)) { -+ writel(BIT(gpio_irq), -+ chip->base + JZ_REG_GPIO_DIRECTION_CLEAR); -+ } else { -+ writel(BIT(gpio_irq), -+ chip->base + JZ_REG_GPIO_DIRECTION_SET); -+ } -+ } -+ -+ gpio_irq += (gpio_bank << 5) + JZ4740_IRQ_GPIO(0); -+ -+ generic_handle_irq(gpio_irq); -+}; -+ -+static inline void jz_gpio_set_irq_bit(unsigned int irq, unsigned int reg) -+{ -+ writel(IRQ_TO_BIT(irq), IRQ_TO_REG(irq, reg)); -+} -+ -+static void jz_gpio_irq_mask(unsigned int irq) -+{ -+ jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_MASK_SET); -+}; -+ -+static void jz_gpio_irq_unmask(unsigned int irq) -+{ -+ jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_MASK_CLEAR); -+}; -+ -+ -+/* TODO: Check if function is gpio */ -+static unsigned int jz_gpio_irq_startup(unsigned int irq) -+{ -+ struct irq_desc *desc = irq_to_desc(irq); -+ -+ jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_SELECT_SET); -+ -+ desc->status &= ~IRQ_MASKED; -+ jz_gpio_irq_unmask(irq); -+ -+ return 0; -+} -+ -+static void jz_gpio_irq_shutdown(unsigned int irq) -+{ -+ struct irq_desc *desc = irq_to_desc(irq); -+ -+ jz_gpio_irq_mask(irq); -+ desc->status |= IRQ_MASKED; -+ -+ /* Set direction to input */ -+ jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_DIRECTION_CLEAR); -+ jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_SELECT_CLEAR); -+} -+ -+static void jz_gpio_irq_ack(unsigned int irq) -+{ -+ jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_FLAG_CLEAR); -+}; -+ -+static int jz_gpio_irq_set_type(unsigned int irq, unsigned int flow_type) -+{ -+ struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(irq); -+ struct irq_desc *desc = irq_to_desc(irq); -+ -+ jz_gpio_irq_mask(irq); -+ -+ if (flow_type == IRQ_TYPE_EDGE_BOTH) { -+ uint32_t value = readl(IRQ_TO_REG(irq, JZ_REG_GPIO_PIN)); -+ if (value & IRQ_TO_BIT(irq)) -+ flow_type = IRQ_TYPE_EDGE_FALLING; -+ else -+ flow_type = IRQ_TYPE_EDGE_RISING; -+ chip->edge_trigger_both |= IRQ_TO_BIT(irq); -+ } else { -+ chip->edge_trigger_both &= ~IRQ_TO_BIT(irq); -+ } -+ -+ switch (flow_type) { -+ case IRQ_TYPE_EDGE_RISING: -+ jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_DIRECTION_SET); -+ jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_TRIGGER_SET); -+ break; -+ case IRQ_TYPE_EDGE_FALLING: -+ jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_DIRECTION_CLEAR); -+ jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_TRIGGER_SET); -+ break; -+ case IRQ_TYPE_LEVEL_HIGH: -+ jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_DIRECTION_SET); -+ jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_TRIGGER_CLEAR); -+ break; -+ case IRQ_TYPE_LEVEL_LOW: -+ jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_DIRECTION_CLEAR); -+ jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_TRIGGER_CLEAR); -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ if (!(desc->status & IRQ_MASKED)) -+ jz_gpio_irq_unmask(irq); -+ -+ return 0; -+} -+ -+static int jz_gpio_irq_set_wake(unsigned int irq, unsigned int on) -+{ -+ struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(irq); -+ spin_lock(&chip->lock); -+ if (on) -+ chip->wakeup |= IRQ_TO_BIT(irq); -+ else -+ chip->wakeup &= ~IRQ_TO_BIT(irq); -+ spin_unlock(&chip->lock); -+ -+ set_irq_wake(chip->irq, on); -+ return 0; -+} -+ -+int gpio_to_irq(unsigned gpio) -+{ -+ return JZ4740_IRQ_GPIO(0) + gpio; -+} -+EXPORT_SYMBOL_GPL(gpio_to_irq); -+ -+int irq_to_gpio(unsigned gpio) -+{ -+ return IRQ_TO_GPIO(gpio); -+} -+EXPORT_SYMBOL_GPL(irq_to_gpio); -+ -+/* -+ * This lock class tells lockdep that GPIO irqs are in a different -+ * category than their parents, so it won't report false recursion. -+ */ -+static struct lock_class_key gpio_lock_class; -+ -+#define JZ4740_GPIO_CHIP(_bank) { \ -+ .irq_base = JZ4740_IRQ_GPIO_BASE_ ## _bank, \ -+ .gpio_chip = { \ -+ .label = "Bank " # _bank, \ -+ .owner = THIS_MODULE, \ -+ .set = jz_gpio_set_value, \ -+ .get = jz_gpio_get_value, \ -+ .direction_output = jz_gpio_direction_output, \ -+ .direction_input = jz_gpio_direction_input, \ -+ .base = JZ4740_GPIO_BASE_ ## _bank, \ -+ .ngpio = JZ4740_GPIO_NUM_ ## _bank, \ -+ }, \ -+ .irq_chip = { \ -+ .name = "GPIO Bank " # _bank, \ -+ .mask = jz_gpio_irq_mask, \ -+ .unmask = jz_gpio_irq_unmask, \ -+ .ack = jz_gpio_irq_ack, \ -+ .startup = jz_gpio_irq_startup, \ -+ .shutdown = jz_gpio_irq_shutdown, \ -+ .set_type = jz_gpio_irq_set_type, \ -+ .set_wake = jz_gpio_irq_set_wake, \ -+ }, \ -+} -+ -+static struct jz_gpio_chip jz4740_gpio_chips[] = { -+ JZ4740_GPIO_CHIP(A), -+ JZ4740_GPIO_CHIP(B), -+ JZ4740_GPIO_CHIP(C), -+ JZ4740_GPIO_CHIP(D), -+}; -+ -+static inline struct jz_gpio_chip *sysdev_to_chip(struct sys_device *dev) -+{ -+ return container_of(dev, struct jz_gpio_chip, sysdev); -+} -+ -+static int jz4740_gpio_suspend(struct sys_device *dev, pm_message_t state) -+{ -+ struct jz_gpio_chip *chip = sysdev_to_chip(dev); -+ -+ chip->suspend_mask = readl(chip->base + JZ_REG_GPIO_MASK); -+ writel(~(chip->wakeup), chip->base + JZ_REG_GPIO_MASK_SET); -+ writel(chip->wakeup, chip->base + JZ_REG_GPIO_MASK_CLEAR); -+ -+ return 0; -+} -+ -+static int jz4740_gpio_resume(struct sys_device *dev) -+{ -+ struct jz_gpio_chip *chip = sysdev_to_chip(dev); -+ uint32_t mask = chip->suspend_mask; -+ -+ writel(~mask, chip->base + JZ_REG_GPIO_MASK_CLEAR); -+ writel(mask, chip->base + JZ_REG_GPIO_MASK_SET); -+ -+ return 0; -+} -+ -+static struct sysdev_class jz4740_gpio_sysdev_class = { -+ .name = "gpio", -+ .suspend = jz4740_gpio_suspend, -+ .resume = jz4740_gpio_resume, -+}; -+ -+static int jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id) -+{ -+ int ret, irq; -+ -+ chip->sysdev.id = id; -+ chip->sysdev.cls = &jz4740_gpio_sysdev_class; -+ ret = sysdev_register(&chip->sysdev); -+ -+ if (ret) -+ return ret; -+ -+ spin_lock_init(&chip->lock); -+ -+ chip->base = ioremap(CPHYSADDR(JZ4740_GPIO_BASE_ADDR) + (id * 0x100), 0x100); -+ -+ gpiochip_add(&chip->gpio_chip); -+ -+ chip->irq = JZ4740_IRQ_INTC_GPIO(id); -+ set_irq_data(chip->irq, chip); -+ set_irq_chained_handler(chip->irq, jz_gpio_irq_demux_handler); -+ -+ for (irq = chip->irq_base; irq < chip->irq_base + chip->gpio_chip.ngpio; ++irq) { -+ lockdep_set_class(&irq_desc[irq].lock, &gpio_lock_class); -+ set_irq_chip_and_handler(irq, &chip->irq_chip, handle_level_irq); -+ set_irq_chip_data(irq, chip); -+ } -+ -+ return 0; -+} -+ -+int __init jz_gpiolib_init(void) -+{ -+ unsigned int i; -+ int ret; -+ -+ ret = sysdev_class_register(&jz4740_gpio_sysdev_class); -+ if (ret) -+ return ret; -+ -+ for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i) { -+ jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i); -+ } -+ -+ printk(KERN_INFO "JZ4740 GPIO initalized\n"); -+ -+ return 0; -+} -+ -+#ifdef CONFIG_DEBUG_FS -+ -+static inline void gpio_seq_reg(struct seq_file *s, struct jz_gpio_chip *chip, -+ const char *name, unsigned int reg) -+{ -+ seq_printf(s, "\t%s: %08x\n", name, readl(chip->base + reg)); -+} -+ -+ -+static int gpio_regs_show(struct seq_file *s, void *unused) -+{ -+ struct jz_gpio_chip *chip = jz4740_gpio_chips; -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i, ++chip) { -+ seq_printf(s, "GPIO %d: \n", i); -+ gpio_seq_reg(s, chip, "Pin", JZ_REG_GPIO_PIN); -+ gpio_seq_reg(s, chip, "Data", JZ_REG_GPIO_DATA); -+ gpio_seq_reg(s, chip, "Mask", JZ_REG_GPIO_MASK); -+ gpio_seq_reg(s, chip, "Pull", JZ_REG_GPIO_PULL); -+ gpio_seq_reg(s, chip, "Func", JZ_REG_GPIO_FUNC); -+ gpio_seq_reg(s, chip, "Select", JZ_REG_GPIO_SELECT); -+ gpio_seq_reg(s, chip, "Direction", JZ_REG_GPIO_DIRECTION); -+ gpio_seq_reg(s, chip, "Trigger", JZ_REG_GPIO_TRIGGER); -+ gpio_seq_reg(s, chip, "Flag", JZ_REG_GPIO_FLAG); -+ } -+ -+ return 0; -+} -+ -+static int gpio_regs_open(struct inode *inode, struct file *file) -+{ -+ return single_open(file, gpio_regs_show, NULL); -+} -+ -+static const struct file_operations gpio_regs_operations = { -+ .open = gpio_regs_open, -+ .read = seq_read, -+ .llseek = seq_lseek, -+ .release = single_release, -+}; -+ -+static int __init gpio_debugfs_init(void) -+{ -+ (void) debugfs_create_file("jz_regs_gpio", S_IFREG | S_IRUGO, -+ NULL, NULL, &gpio_regs_operations); -+ return 0; -+} -+subsys_initcall(gpio_debugfs_init); -+ -+#endif -diff --git a/arch/mips/jz4740/irq.c b/arch/mips/jz4740/irq.c -new file mode 100644 -index 0000000..46a03ee ---- /dev/null -+++ b/arch/mips/jz4740/irq.c -@@ -0,0 +1,170 @@ -+/* -+ * Copyright (C) 2009-2010, Lars-Peter Clausen -+ * JZ4740 platform IRQ support -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+ -+static void __iomem *jz_intc_base; -+static uint32_t jz_intc_wakeup; -+static uint32_t jz_intc_saved; -+ -+#define JZ_REG_INTC_STATUS 0x00 -+#define JZ_REG_INTC_MASK 0x04 -+#define JZ_REG_INTC_SET_MASK 0x08 -+#define JZ_REG_INTC_CLEAR_MASK 0x0c -+#define JZ_REG_INTC_PENDING 0x10 -+ -+#define IRQ_BIT(x) BIT((x) - JZ4740_IRQ_BASE) -+ -+static void intc_irq_unmask(unsigned int irq) -+{ -+ writel(IRQ_BIT(irq), jz_intc_base + JZ_REG_INTC_CLEAR_MASK); -+} -+ -+static void intc_irq_mask(unsigned int irq) -+{ -+ writel(IRQ_BIT(irq), jz_intc_base + JZ_REG_INTC_SET_MASK); -+} -+ -+static int intc_irq_set_wake(unsigned int irq, unsigned int on) -+{ -+ if (on) -+ jz_intc_wakeup |= IRQ_BIT(irq); -+ else -+ jz_intc_wakeup &= ~IRQ_BIT(irq); -+ -+ return 0; -+} -+ -+static struct irq_chip intc_irq_type = { -+ .name = "INTC", -+ .mask = intc_irq_mask, -+ .mask_ack = intc_irq_mask, -+ .unmask = intc_irq_unmask, -+ .set_wake = intc_irq_set_wake, -+}; -+ -+static irqreturn_t jz4740_cascade(int irq, void *data) -+{ -+ uint32_t irq_reg; -+ int intc_irq; -+ -+ irq_reg = readl(jz_intc_base + JZ_REG_INTC_PENDING); -+ -+ intc_irq = ffs(irq_reg); -+ if (intc_irq) -+ generic_handle_irq(intc_irq - 1 + JZ4740_IRQ_BASE); -+ -+ return IRQ_HANDLED; -+} -+ -+static struct irqaction jz4740_cascade_action = { -+ .handler = jz4740_cascade, -+ .name = "JZ4740 cascade interrupt", -+ .flags = IRQF_DISABLED, -+}; -+ -+void __init arch_init_irq(void) -+{ -+ int i; -+ mips_cpu_irq_init(); -+ -+ jz_intc_base = ioremap(CPHYSADDR(JZ4740_INTC_BASE_ADDR), 0x14); -+ -+ for (i = JZ4740_IRQ_BASE; i < JZ4740_IRQ_BASE + 32; i++) { -+ intc_irq_mask(i); -+ set_irq_chip_and_handler(i, &intc_irq_type, handle_level_irq); -+ } -+ -+ setup_irq(2, &jz4740_cascade_action); -+} -+ -+asmlinkage void plat_irq_dispatch(void) -+{ -+ unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; -+ if (pending & STATUSF_IP2) -+ do_IRQ(2); -+ else if (pending & STATUSF_IP3) -+ do_IRQ(3); -+ else -+ spurious_interrupt(); -+} -+ -+void jz4740_intc_suspend(void) -+{ -+ jz_intc_saved = readl(jz_intc_base + JZ_REG_INTC_MASK); -+ writel(~jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_SET_MASK); -+ writel(jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_CLEAR_MASK); -+} -+ -+void jz4740_intc_resume(void) -+{ -+ writel(~jz_intc_saved, jz_intc_base + JZ_REG_INTC_CLEAR_MASK); -+ writel(jz_intc_saved, jz_intc_base + JZ_REG_INTC_SET_MASK); -+} -+ -+#ifdef CONFIG_DEBUG_FS -+ -+static inline void intc_seq_reg(struct seq_file *s, const char *name, -+ unsigned int reg) -+{ -+ seq_printf(s, "%s:\t\t%08x\n", name, readl(jz_intc_base + reg)); -+} -+ -+static int intc_regs_show(struct seq_file *s, void *unused) -+{ -+ intc_seq_reg(s, "Status", JZ_REG_INTC_STATUS); -+ intc_seq_reg(s, "Mask", JZ_REG_INTC_MASK); -+ intc_seq_reg(s, "Pending", JZ_REG_INTC_PENDING); -+ -+ return 0; -+} -+ -+static int intc_regs_open(struct inode *inode, struct file *file) -+{ -+ return single_open(file, intc_regs_show, NULL); -+} -+ -+static const struct file_operations intc_regs_operations = { -+ .open = intc_regs_open, -+ .read = seq_read, -+ .llseek = seq_lseek, -+ .release = single_release, -+}; -+ -+static int __init intc_debugfs_init(void) -+{ -+ (void) debugfs_create_file("jz_regs_intc", S_IFREG | S_IRUGO, -+ NULL, NULL, &intc_regs_operations); -+ return 0; -+} -+subsys_initcall(intc_debugfs_init); -+ -+#endif -diff --git a/arch/mips/jz4740/irq.h b/arch/mips/jz4740/irq.h -new file mode 100644 -index 0000000..dadbd5f ---- /dev/null -+++ b/arch/mips/jz4740/irq.h -@@ -0,0 +1,21 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#ifndef __MIPS_JZ4740_IRQ_H__ -+#define __MIPS_JZ4740_IRQ_H__ -+ -+extern void jz4740_intc_suspend(void); -+extern void jz4740_intc_resume(void); -+ -+#endif -diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c -new file mode 100644 -index 0000000..6bb0778 ---- /dev/null -+++ b/arch/mips/jz4740/platform.c -@@ -0,0 +1,246 @@ -+/* -+ * Copyright (C) 2009-2010, Lars-Peter Clausen -+ * JZ4740 platform devices -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+/* OHCI (USB full speed host controller) */ -+static struct resource jz4740_usb_ohci_resources[] = { -+ [0] = { -+ .start = CPHYSADDR(JZ4740_UHC_BASE_ADDR), -+ .end = CPHYSADDR(JZ4740_UHC_BASE_ADDR) + 0x10000 - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = JZ4740_IRQ_UHC, -+ .end = JZ4740_IRQ_UHC, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+/* The dmamask must be set for OHCI to work */ -+static u64 ohci_dmamask = ~(u32)0; -+ -+struct platform_device jz4740_usb_ohci_device = { -+ .name = "jz4740-ohci", -+ .id = -1, -+ .dev = { -+ .dma_mask = &ohci_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+ .num_resources = ARRAY_SIZE(jz4740_usb_ohci_resources), -+ .resource = jz4740_usb_ohci_resources, -+}; -+ -+/* UDC (USB gadget controller) */ -+static struct resource jz4740_usb_gdt_resources[] = { -+ [0] = { -+ .start = CPHYSADDR(JZ4740_UDC_BASE_ADDR), -+ .end = CPHYSADDR(JZ4740_UDC_BASE_ADDR) + 0x10000 - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = JZ4740_IRQ_UDC, -+ .end = JZ4740_IRQ_UDC, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 jz4740_udc_dmamask = ~(u32)0; -+ -+struct platform_device jz4740_usb_gdt_device = { -+ .name = "jz-udc", -+ .id = -1, -+ .dev = { -+ .dma_mask = &jz4740_udc_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+ .num_resources = ARRAY_SIZE(jz4740_usb_gdt_resources), -+ .resource = jz4740_usb_gdt_resources, -+}; -+ -+/** MMC/SD controller **/ -+static struct resource jz4740_mmc_resources[] = { -+ [0] = { -+ .start = CPHYSADDR(JZ4740_MSC_BASE_ADDR), -+ .end = CPHYSADDR(JZ4740_MSC_BASE_ADDR) + 0x10000 - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = JZ4740_IRQ_MSC, -+ .end = JZ4740_IRQ_MSC, -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ -+static u64 jz4740_mmc_dmamask = ~(u32)0; -+ -+struct platform_device jz4740_mmc_device = { -+ .name = "jz4740-mmc", -+ .id = 0, -+ .dev = { -+ .dma_mask = &jz4740_mmc_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+ .num_resources = ARRAY_SIZE(jz4740_mmc_resources), -+ .resource = jz4740_mmc_resources, -+}; -+ -+static struct resource jz4740_rtc_resources[] = { -+ [0] = { -+ .start = CPHYSADDR(JZ4740_RTC_BASE_ADDR), -+ .end = CPHYSADDR(JZ4740_RTC_BASE_ADDR) + 0x38 - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = JZ4740_IRQ_RTC, -+ .end = JZ4740_IRQ_RTC, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+struct platform_device jz4740_rtc_device = { -+ .name = "jz4740-rtc", -+ .id = -1, -+ .num_resources = ARRAY_SIZE(jz4740_rtc_resources), -+ .resource = jz4740_rtc_resources, -+}; -+ -+/** I2C controller **/ -+static struct resource jz4740_i2c_resources[] = { -+ [0] = { -+ .start = CPHYSADDR(JZ4740_I2C_BASE_ADDR), -+ .end = CPHYSADDR(JZ4740_I2C_BASE_ADDR) + 0x10000 - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = JZ4740_IRQ_I2C, -+ .end = JZ4740_IRQ_I2C, -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ -+static u64 jz4740_i2c_dmamask = ~(u32)0; -+ -+struct platform_device jz4740_i2c_device = { -+ .name = "jz_i2c", -+ .id = 0, -+ .dev = { -+ .dma_mask = &jz4740_i2c_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+ .num_resources = ARRAY_SIZE(jz4740_i2c_resources), -+ .resource = jz4740_i2c_resources, -+}; -+ -+static struct resource jz4740_nand_resources[] = { -+ [0] = { -+ .start = CPHYSADDR(JZ4740_EMC_BASE_ADDR), -+ .end = CPHYSADDR(JZ4740_EMC_BASE_ADDR) + 0x10000 - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+struct platform_device jz4740_nand_device = { -+ .name = "jz4740-nand", -+ .num_resources = ARRAY_SIZE(jz4740_nand_resources), -+ .resource = jz4740_nand_resources, -+}; -+ -+static struct resource jz4740_framebuffer_resources[] = { -+ [0] = { -+ .start = CPHYSADDR(JZ4740_LCD_BASE_ADDR), -+ .end = CPHYSADDR(JZ4740_LCD_BASE_ADDR) + 0x10000 - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+static u64 jz4740_fb_dmamask = ~(u32)0; -+ -+struct platform_device jz4740_framebuffer_device = { -+ .name = "jz4740-fb", -+ .id = -1, -+ .num_resources = ARRAY_SIZE(jz4740_framebuffer_resources), -+ .resource = jz4740_framebuffer_resources, -+ .dev = { -+ .dma_mask = &jz4740_fb_dmamask, -+ .coherent_dma_mask = 0xffffffff, -+ }, -+}; -+ -+static struct resource jz4740_i2s_resources[] = { -+ [0] = { -+ .start = CPHYSADDR(JZ4740_AIC_BASE_ADDR), -+ .end = CPHYSADDR(JZ4740_AIC_BASE_ADDR) + 0x38 - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+struct platform_device jz4740_i2s_device = { -+ .name = "jz4740-i2s", -+ .id = -1, -+ .num_resources = ARRAY_SIZE(jz4740_i2s_resources), -+ .resource = jz4740_i2s_resources, -+}; -+ -+static struct resource jz4740_codec_resources[] = { -+ [0] = { -+ .start = CPHYSADDR(JZ4740_AIC_BASE_ADDR) + 0x80, -+ .end = CPHYSADDR(JZ4740_AIC_BASE_ADDR) + 0x88 - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+struct platform_device jz4740_codec_device = { -+ .name = "jz4740-codec", -+ .id = -1, -+ .num_resources = ARRAY_SIZE(jz4740_codec_resources), -+ .resource = jz4740_codec_resources, -+}; -+ -+static struct resource jz4740_adc_resources[] = { -+ [0] = { -+ .start = CPHYSADDR(JZ4740_SADC_BASE_ADDR), -+ .end = CPHYSADDR(JZ4740_SADC_BASE_ADDR) + 0x30, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = JZ4740_IRQ_SADC, -+ .end = JZ4740_IRQ_SADC, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+struct platform_device jz4740_adc_device = { -+ .name = "jz4740-adc", -+ .id = -1, -+ .num_resources = ARRAY_SIZE(jz4740_adc_resources), -+ .resource = jz4740_adc_resources, -+}; -+ -+struct platform_device jz4740_battery_device = { -+ .name = "jz4740-battery", -+ .id = -1, -+ .dev = { -+ .parent = &jz4740_adc_device.dev -+ }, -+}; -diff --git a/arch/mips/jz4740/pm.c b/arch/mips/jz4740/pm.c -new file mode 100644 -index 0000000..4ca3156 ---- /dev/null -+++ b/arch/mips/jz4740/pm.c -@@ -0,0 +1,59 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * JZ4740 SoC power management support -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include "clock.h" -+#include "irq.h" -+ -+static int jz_pm_enter(suspend_state_t state) -+{ -+ jz4740_intc_suspend(); -+ jz4740_clock_suspend(); -+ -+ jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_SLEEP); -+ -+ __asm__(".set\tmips3\n\t" -+ "wait\n\t" -+ ".set\tmips0"); -+ -+ jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_IDLE); -+ -+ jz4740_clock_resume(); -+ jz4740_intc_resume(); -+ -+ return 0; -+} -+ -+static struct platform_suspend_ops jz_pm_ops = { -+ .valid = suspend_valid_only_mem, -+ .enter = jz_pm_enter, -+}; -+ -+/* -+ * Initialize power interface -+ */ -+int __init jz_pm_init(void) -+{ -+ suspend_set_ops(&jz_pm_ops); -+ return 0; -+ -+} -+late_initcall(jz_pm_init); -diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c -new file mode 100644 -index 0000000..4f99ea3 ---- /dev/null -+++ b/arch/mips/jz4740/prom.c -@@ -0,0 +1,69 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * JZ4740 SoC prom code -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+ -+#include -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+ -+void jz4740_init_cmdline(int argc, char *argv[]) -+{ -+ unsigned int count = COMMAND_LINE_SIZE - 1; -+ int i; -+ char *dst = &(arcs_cmdline[0]); -+ char *src; -+ -+ for (i = 1; i < argc && count; ++i) { -+ src = argv[i]; -+ while (*src && count) { -+ *dst++ = *src++; -+ --count; -+ } -+ *dst++ = ' '; -+ } -+ if (i > 1) -+ --dst; -+ -+ *dst = 0; -+} -+ -+void __init prom_init(void) -+{ -+ jz4740_init_cmdline((int)fw_arg0, (char **)fw_arg1); -+ mips_machtype = MACH_INGENIC_JZ4740; -+} -+ -+void __init prom_free_prom_memory(void) -+{ -+} -+ -+#define UART_REG(offset) ((void __iomem*)(JZ4740_UART0_BASE_ADDR + (offset << 2))) -+ -+void prom_putchar(char c) -+{ -+ uint8_t lsr; -+ -+ do { -+ lsr = readb(UART_REG(UART_LSR)); -+ } while ((lsr & UART_LSR_TEMT) == 0); -+ -+ writeb(c, UART_REG(UART_TX)); -+} -diff --git a/arch/mips/jz4740/pwm.c b/arch/mips/jz4740/pwm.c -new file mode 100644 -index 0000000..0ff8c1d ---- /dev/null -+++ b/arch/mips/jz4740/pwm.c -@@ -0,0 +1,167 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * JZ4740 platform PWM support -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+ -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include "timer.h" -+ -+static struct clk *jz4740_pwm_clk; -+ -+DEFINE_MUTEX(jz4740_pwm_mutex); -+ -+struct pwm_device { -+ unsigned int id; -+ unsigned int gpio; -+ bool used; -+}; -+ -+static struct pwm_device jz4740_pwm_list[] = { -+ { 2, JZ_GPIO_PWM2, false }, -+ { 3, JZ_GPIO_PWM3, false }, -+ { 4, JZ_GPIO_PWM4, false }, -+ { 5, JZ_GPIO_PWM5, false }, -+ { 6, JZ_GPIO_PWM6, false }, -+ { 7, JZ_GPIO_PWM7, false }, -+}; -+ -+struct pwm_device *pwm_request(int id, const char *label) -+{ -+ int ret = 0; -+ struct pwm_device *pwm; -+ -+ if (!jz4740_pwm_clk) { -+ jz4740_pwm_clk = clk_get(NULL, "pclk"); -+ -+ if (IS_ERR(jz4740_pwm_clk)) -+ return ERR_PTR(PTR_ERR(jz4740_pwm_clk)); -+ } -+ -+ if (id < 2 || id > 7) { -+ return ERR_PTR(-ENOENT); -+ } -+ -+ mutex_lock(&jz4740_pwm_mutex); -+ -+ pwm = &jz4740_pwm_list[id - 2]; -+ if (pwm->used) -+ ret = -EBUSY; -+ else -+ pwm->used = true; -+ -+ mutex_unlock(&jz4740_pwm_mutex); -+ -+ if (ret) { -+ return ERR_PTR(ret); -+ } -+ -+ ret = gpio_request(pwm->gpio, label); -+ -+ if (ret) { -+ printk("Failed to request pwm gpio: %d\n", ret); -+ pwm->used = false; -+ return ERR_PTR(ret); -+ } -+ -+ jz_gpio_set_function(pwm->gpio, JZ_GPIO_FUNC_PWM); -+ -+ jz4740_timer_start(id); -+ -+ return pwm; -+} -+ -+void pwm_free(struct pwm_device *pwm) -+{ -+ pwm_disable(pwm); -+ jz4740_timer_set_ctrl(pwm->id, 0); -+ -+ jz_gpio_set_function(pwm->gpio, JZ_GPIO_FUNC_NONE); -+ gpio_free(pwm->gpio); -+ -+ jz4740_timer_stop(pwm->id); -+ -+ pwm->used = false; -+ -+} -+ -+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) -+{ -+ unsigned long long tmp; -+ unsigned long period, duty; -+ unsigned int prescaler = 0; -+ unsigned int id = pwm->id; -+ uint16_t ctrl; -+ bool is_enabled; -+ -+ if (duty_ns < 0 || duty_ns > period_ns) -+ return -EINVAL; -+ -+ tmp = (unsigned long long)clk_get_rate(jz4740_pwm_clk) * period_ns; -+ -+ do_div(tmp, 1000000000); -+ -+ period = tmp; -+ -+ while (period > 0xffff && prescaler < 6) { -+ period >>= 2; -+ ++prescaler; -+ } -+ -+ if (prescaler == 6) -+ return -EINVAL; -+ -+ -+ tmp = (unsigned long long)period * duty_ns; -+ do_div(tmp, period_ns); -+ duty = tmp; -+ -+ if (duty >= period) -+ duty = period - 1; -+ -+ is_enabled = jz4740_timer_is_enabled(id); -+ jz4740_timer_disable(id); -+ -+ jz4740_timer_set_count(id, 0); -+ jz4740_timer_set_duty(id, duty); -+ jz4740_timer_set_period(id, period); -+ -+ ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_PWM_ENABLE | -+ JZ_TIMER_CTRL_SRC_PCLK; -+ -+ jz4740_timer_set_ctrl(id, ctrl); -+ -+ if (is_enabled) -+ jz4740_timer_enable(id); -+ -+ return 0; -+} -+ -+int pwm_enable(struct pwm_device *pwm) -+{ -+ jz4740_timer_enable(pwm->id); -+ -+ return 0; -+} -+ -+void pwm_disable(struct pwm_device *pwm) -+{ -+ jz4740_timer_disable(pwm->id); -+} -diff --git a/arch/mips/jz4740/reset.c b/arch/mips/jz4740/reset.c -new file mode 100644 -index 0000000..448a7da ---- /dev/null -+++ b/arch/mips/jz4740/reset.c -@@ -0,0 +1,81 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#include -+#include -+#include -+ -+#include -+ -+#include -+ -+#include -+#include -+ -+static void jz4740_halt(void) -+{ -+ while (1) { -+ __asm__(".set push;\n" -+ ".set mips3;\n" -+ "wait;\n" -+ ".set pop;\n" -+ ); -+ } -+} -+ -+#define JZ_REG_WDT_DATA 0x00 -+#define JZ_REG_WDT_COUNTER_ENABLE 0x04 -+#define JZ_REG_WDT_COUNTER 0x08 -+#define JZ_REG_WDT_CTRL 0x0c -+ -+static void jz4740_restart(char *command) -+{ -+ void __iomem *wdt_base = ioremap(CPHYSADDR(JZ4740_WDT_BASE_ADDR), 0x0f); -+ -+ jz4740_timer_enable_watchdog(); -+ -+ writeb(0, wdt_base + JZ_REG_WDT_COUNTER_ENABLE); -+ -+ writew(0, wdt_base + JZ_REG_WDT_COUNTER); -+ writew(0, wdt_base + JZ_REG_WDT_DATA); -+ writew(BIT(2), wdt_base + JZ_REG_WDT_CTRL); -+ -+ writeb(1, wdt_base + JZ_REG_WDT_COUNTER_ENABLE); -+ jz4740_halt(); -+} -+ -+#define JZ_REG_RTC_CTRL 0x00 -+#define JZ_REG_RTC_HIBERNATE 0x20 -+ -+#define JZ_RTC_CTRL_WRDY BIT(7) -+ -+static void jz4740_power_off(void) -+{ -+ void __iomem *rtc_base = ioremap(CPHYSADDR(JZ4740_RTC_BASE_ADDR), 0x24); -+ uint32_t ctrl; -+ -+ do { -+ ctrl = readl(rtc_base + JZ_REG_RTC_CTRL); -+ } while (!(ctrl & JZ_RTC_CTRL_WRDY)); -+ -+ writel(1, rtc_base + JZ_REG_RTC_HIBERNATE); -+ jz4740_halt(); -+} -+ -+void jz4740_reset_init(void) -+{ -+ _machine_restart = jz4740_restart; -+ _machine_halt = jz4740_halt; -+ pm_power_off = jz4740_power_off; -+} -diff --git a/arch/mips/jz4740/reset.h b/arch/mips/jz4740/reset.h -new file mode 100644 -index 0000000..c57a829 ---- /dev/null -+++ b/arch/mips/jz4740/reset.h -@@ -0,0 +1,7 @@ -+#ifndef __MIPS_JZ4740_RESET_H__ -+#define __MIPS_JZ4740_RESET_H__ -+ -+extern void jz4740_reset_init(void); -+ -+#endif -+ -diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c -new file mode 100644 -index 0000000..a6628f4 ---- /dev/null -+++ b/arch/mips/jz4740/setup.c -@@ -0,0 +1,64 @@ -+/* -+ * Copyright (C) 2009-2010, Lars-Peter Clausen -+ * JZ4740 setup code -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include "reset.h" -+#include "clock.h" -+ -+static void __init jz4740_serial_setup(void) -+{ -+#ifdef CONFIG_SERIAL_8250 -+ struct uart_port s; -+ memset(&s, 0, sizeof(s)); -+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; -+ s.iotype = SERIAL_IO_MEM; -+ s.regshift = 2; -+ s.uartclk = jz4740_clock_bdata.ext_rate; -+ -+ s.line = 0; -+ s.membase = (u8 *)JZ4740_UART0_BASE_ADDR; -+ s.irq = JZ4740_IRQ_UART0; -+ if (early_serial_setup(&s) != 0) { -+ printk(KERN_ERR "Serial ttyS0 setup failed!\n"); -+ } -+ -+ s.line = 1; -+ s.membase = (u8 *)JZ4740_UART1_BASE_ADDR; -+ s.irq = JZ4740_IRQ_UART1; -+ if (early_serial_setup(&s) != 0) { -+ printk(KERN_ERR "Serial ttyS1 setup failed!\n"); -+ } -+#endif -+} -+void __init plat_mem_setup(void) -+{ -+ jz4740_reset_init(); -+ jz4740_serial_setup(); -+} -+ -+const char *get_system_type(void) -+{ -+ return "JZ4740"; -+} -diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c -new file mode 100644 -index 0000000..da8183f ---- /dev/null -+++ b/arch/mips/jz4740/time.c -@@ -0,0 +1,144 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * JZ4740 platform time support -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#include -+#include -+#include -+ -+#include -+ -+#include -+#include -+ -+#include "clock.h" -+#include "timer.h" -+ -+#define TIMER_CLOCKEVENT 0 -+#define TIMER_CLOCKSOURCE 1 -+ -+static uint16_t jz4740_jiffies_per_tick; -+ -+static cycle_t jz4740_clocksource_read(struct clocksource *cs) -+{ -+ return jz4740_timer_get_count(TIMER_CLOCKSOURCE); -+} -+ -+static struct clocksource jz4740_clocksource = { -+ .name = "jz4740-timer", -+ .rating = 200, -+ .read = jz4740_clocksource_read, -+ .mask = CLOCKSOURCE_MASK(16), -+ .flags = CLOCK_SOURCE_IS_CONTINUOUS, -+}; -+ -+static irqreturn_t jz4740_clockevent_irq(int irq, void *devid) -+{ -+ struct clock_event_device *cd = devid; -+ -+ jz4740_timer_ack_full(TIMER_CLOCKEVENT); -+ -+ if (cd->mode != CLOCK_EVT_MODE_PERIODIC) -+ jz4740_timer_disable(TIMER_CLOCKEVENT); -+ -+ cd->event_handler(cd); -+ -+ return IRQ_HANDLED; -+} -+ -+static void jz4740_clockevent_set_mode(enum clock_event_mode mode, -+ struct clock_event_device *cd) -+{ -+ switch (mode) { -+ case CLOCK_EVT_MODE_PERIODIC: -+ jz4740_timer_set_count(TIMER_CLOCKEVENT, 0); -+ jz4740_timer_set_period(TIMER_CLOCKEVENT, jz4740_jiffies_per_tick); -+ case CLOCK_EVT_MODE_RESUME: -+ jz4740_timer_irq_full_enable(TIMER_CLOCKEVENT); -+ jz4740_timer_enable(TIMER_CLOCKEVENT); -+ break; -+ case CLOCK_EVT_MODE_ONESHOT: -+ case CLOCK_EVT_MODE_SHUTDOWN: -+ jz4740_timer_disable(TIMER_CLOCKEVENT); -+ break; -+ default: -+ break; -+ } -+} -+ -+static int jz4740_clockevent_set_next(unsigned long evt, -+ struct clock_event_device *cd) -+{ -+ jz4740_timer_set_count(TIMER_CLOCKEVENT, 0); -+ jz4740_timer_set_period(TIMER_CLOCKEVENT, evt); -+ jz4740_timer_enable(TIMER_CLOCKEVENT); -+ -+ return 0; -+} -+ -+static struct clock_event_device jz4740_clockevent = { -+ .name = "jz4740-timer", -+ .features = CLOCK_EVT_FEAT_PERIODIC, -+ .set_next_event = jz4740_clockevent_set_next, -+ .set_mode = jz4740_clockevent_set_mode, -+ .rating = 200, -+ .irq = JZ4740_IRQ_TCU0, -+}; -+ -+static struct irqaction timer_irqaction = { -+ .handler = jz4740_clockevent_irq, -+ .flags = IRQF_PERCPU | IRQF_TIMER | IRQF_DISABLED, -+ .name = "jz4740-timerirq", -+ .dev_id = &jz4740_clockevent, -+}; -+ -+void __init plat_time_init(void) -+{ -+ int ret; -+ uint32_t clk_rate; -+ uint16_t ctrl; -+ -+ jz4740_timer_init(); -+ -+ clk_rate = jz4740_clock_bdata.ext_rate >> 4; -+ jz4740_jiffies_per_tick = DIV_ROUND_CLOSEST(clk_rate, HZ); -+ -+ clockevent_set_clock(&jz4740_clockevent, clk_rate); -+ jz4740_clockevent.min_delta_ns = clockevent_delta2ns(100, &jz4740_clockevent); -+ jz4740_clockevent.max_delta_ns = clockevent_delta2ns(0xffff, &jz4740_clockevent); -+ jz4740_clockevent.cpumask = cpumask_of(0); -+ -+ clockevents_register_device(&jz4740_clockevent); -+ -+ clocksource_set_clock(&jz4740_clocksource, clk_rate); -+ ret = clocksource_register(&jz4740_clocksource); -+ -+ if (ret) -+ printk(KERN_ERR "Failed to register clocksource: %d\n", ret); -+ -+ setup_irq(JZ4740_IRQ_TCU0, &timer_irqaction); -+ -+ ctrl = JZ_TIMER_CTRL_PRESCALE_16 | JZ_TIMER_CTRL_SRC_EXT; -+ -+ jz4740_timer_set_ctrl(TIMER_CLOCKEVENT, ctrl); -+ jz4740_timer_set_ctrl(TIMER_CLOCKSOURCE, ctrl); -+ -+ jz4740_timer_set_period(TIMER_CLOCKEVENT, jz4740_jiffies_per_tick); -+ jz4740_timer_irq_full_enable(TIMER_CLOCKEVENT); -+ -+ jz4740_timer_set_period(TIMER_CLOCKSOURCE, 0xffff); -+ -+ jz4740_timer_enable(TIMER_CLOCKEVENT); -+ jz4740_timer_enable(TIMER_CLOCKSOURCE); -+} -diff --git a/arch/mips/jz4740/timer.c b/arch/mips/jz4740/timer.c -new file mode 100644 -index 0000000..6e09cae ---- /dev/null -+++ b/arch/mips/jz4740/timer.c -@@ -0,0 +1,48 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * JZ4740 platform timer support -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#include -+#include -+#include -+ -+#include "timer.h" -+ -+#include -+ -+void __iomem *jz4740_timer_base; -+ -+void jz4740_timer_enable_watchdog(void) -+{ -+ writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR); -+} -+ -+void jz4740_timer_disable_watchdog(void) -+{ -+ writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_SET); -+} -+ -+void __init jz4740_timer_init(void) -+{ -+ jz4740_timer_base = ioremap(CPHYSADDR(JZ4740_TCU_BASE_ADDR), 0x100); -+ -+ if (!jz4740_timer_base) -+ panic("Failed to ioremap timer registers"); -+ -+ /* Disable all timer clocks except for those used as system timers */ -+ writel(0x000100fc, jz4740_timer_base + JZ_REG_TIMER_STOP_SET); -+ -+ /* Timer irqs are unmasked by default, mask them */ -+ writel(0x00ff00ff, jz4740_timer_base + JZ_REG_TIMER_MASK_SET); -+} -diff --git a/arch/mips/jz4740/timer.h b/arch/mips/jz4740/timer.h -new file mode 100644 -index 0000000..77d748c ---- /dev/null -+++ b/arch/mips/jz4740/timer.h -@@ -0,0 +1,130 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * JZ4740 platform timer support -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#ifndef __MIPS_JZ4740_TIMER_H__ -+#define __MIPS_JZ4740_TIMER_H__ -+ -+#include -+#include -+ -+#define JZ_REG_TIMER_STOP 0x1C -+#define JZ_REG_TIMER_STOP_SET 0x2C -+#define JZ_REG_TIMER_STOP_CLEAR 0x3C -+#define JZ_REG_TIMER_ENABLE 0x10 -+#define JZ_REG_TIMER_ENABLE_SET 0x14 -+#define JZ_REG_TIMER_ENABLE_CLEAR 0x18 -+#define JZ_REG_TIMER_FLAG 0x20 -+#define JZ_REG_TIMER_FLAG_SET 0x24 -+#define JZ_REG_TIMER_FLAG_CLEAR 0x28 -+#define JZ_REG_TIMER_MASK 0x30 -+#define JZ_REG_TIMER_MASK_SET 0x34 -+#define JZ_REG_TIMER_MASK_CLEAR 0x38 -+ -+#define JZ_REG_TIMER_DFR(x) (((x) * 0x10) + 0x40) -+#define JZ_REG_TIMER_DHR(x) (((x) * 0x10) + 0x44) -+#define JZ_REG_TIMER_CNT(x) (((x) * 0x10) + 0x48) -+#define JZ_REG_TIMER_CTRL(x) (((x) * 0x10) + 0x4C) -+ -+#define JZ_TIMER_IRQ_HALF(x) BIT((x) + 0x10) -+#define JZ_TIMER_IRQ_FULL(x) BIT(x) -+ -+#define JZ_TIMER_CTRL_PWM_ACTIVE_LOW BIT(8) -+#define JZ_TIMER_CTRL_PWM_ENABLE BIT(7) -+#define JZ_TIMER_CTRL_PRESCALE_MASK 0x1c -+#define JZ_TIMER_CTRL_PRESCALE_OFFSET 0x3 -+#define JZ_TIMER_CTRL_PRESCALE_1 (0 << 3) -+#define JZ_TIMER_CTRL_PRESCALE_4 (1 << 3) -+#define JZ_TIMER_CTRL_PRESCALE_16 (2 << 3) -+#define JZ_TIMER_CTRL_PRESCALE_64 (3 << 3) -+#define JZ_TIMER_CTRL_PRESCALE_256 (4 << 3) -+#define JZ_TIMER_CTRL_PRESCALE_1024 (5 << 3) -+ -+#define JZ_TIMER_CTRL_PRESCALER(x) ((x) << JZ_TIMER_CTRL_PRESCALE_OFFSET) -+ -+#define JZ_TIMER_CTRL_SRC_EXT BIT(2) -+#define JZ_TIMER_CTRL_SRC_RTC BIT(1) -+#define JZ_TIMER_CTRL_SRC_PCLK BIT(0) -+ -+extern void __iomem *jz4740_timer_base; -+void __init jz4740_timer_init(void); -+ -+static inline void jz4740_timer_stop(unsigned int timer) -+{ -+ writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_SET); -+} -+ -+static inline void jz4740_timer_start(unsigned int timer) -+{ -+ writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR); -+} -+ -+static inline bool jz4740_timer_is_enabled(unsigned int timer) -+{ -+ return readb(jz4740_timer_base + JZ_REG_TIMER_ENABLE) & BIT(timer); -+} -+ -+static inline void jz4740_timer_enable(unsigned int timer) -+{ -+ writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_SET); -+} -+ -+static inline void jz4740_timer_disable(unsigned int timer) -+{ -+ writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_CLEAR); -+} -+ -+ -+static inline void jz4740_timer_set_period(unsigned int timer, uint16_t period) -+{ -+ writew(period, jz4740_timer_base + JZ_REG_TIMER_DFR(timer)); -+} -+ -+static inline void jz4740_timer_set_duty(unsigned int timer, uint16_t duty) -+{ -+ writew(duty, jz4740_timer_base + JZ_REG_TIMER_DHR(timer)); -+} -+ -+static inline void jz4740_timer_set_count(unsigned int timer, uint16_t count) -+{ -+ writew(count, jz4740_timer_base + JZ_REG_TIMER_CNT(timer)); -+} -+ -+static inline uint16_t jz4740_timer_get_count(unsigned int timer) -+{ -+ return readw(jz4740_timer_base + JZ_REG_TIMER_CNT(timer)); -+} -+ -+static inline void jz4740_timer_ack_full(unsigned int timer) -+{ -+ writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR); -+} -+ -+static inline void jz4740_timer_irq_full_enable(unsigned int timer) -+{ -+ writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR); -+ writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_CLEAR); -+} -+ -+static inline void jz4740_timer_irq_full_disable(unsigned int timer) -+{ -+ writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_SET); -+} -+ -+static inline void jz4740_timer_set_ctrl(unsigned int timer, uint16_t ctrl) -+{ -+ writew(ctrl, jz4740_timer_base + JZ_REG_TIMER_CTRL(timer)); -+} -+ -+#endif -diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c -index be5bb16..926c260 100644 ---- a/arch/mips/kernel/cpu-probe.c -+++ b/arch/mips/kernel/cpu-probe.c -@@ -163,6 +163,7 @@ void __init check_wait(void) - case CPU_BCM6358: - case CPU_CAVIUM_OCTEON: - case CPU_CAVIUM_OCTEON_PLUS: -+ case CPU_JZRISC: - cpu_wait = r4k_wait; - break; - -@@ -932,6 +933,22 @@ platform: - } - } - -+static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu) -+{ -+ decode_configs(c); -+ /* JZRISC does not implement the CP0 counter. */ -+ c->options &= ~MIPS_CPU_COUNTER; -+ switch (c->processor_id & 0xff00) { -+ case PRID_IMP_JZRISC: -+ c->cputype = CPU_JZRISC; -+ __cpu_name[cpu] = "Ingenic JZRISC"; -+ break; -+ default: -+ panic("Unknown Ingenic Processor ID!"); -+ break; -+ } -+} -+ - const char *__cpu_name[NR_CPUS]; - const char *__elf_platform; - -@@ -970,6 +987,9 @@ __cpuinit void cpu_probe(void) - case PRID_COMP_CAVIUM: - cpu_probe_cavium(c, cpu); - break; -+ case PRID_COMP_INGENIC: -+ cpu_probe_ingenic(c, cpu); -+ break; - } - - BUG_ON(!__cpu_name[cpu]); -diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c -index 86f004d..4510e61 100644 ---- a/arch/mips/mm/tlbex.c -+++ b/arch/mips/mm/tlbex.c -@@ -409,6 +409,11 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, - tlbw(p); - break; - -+ case CPU_JZRISC: -+ tlbw(p); -+ uasm_i_nop(p); -+ break; -+ - default: - panic("No TLB refill handler yet (CPU type: %d)", - current_cpu_data.cputype); --- -1.5.6.5 - diff --git a/target/linux/xburst/patches-2.6.34/002-xburst-cache-quirks.patch b/target/linux/xburst/patches-2.6.34/002-xburst-cache-quirks.patch deleted file mode 100644 index f07df44f385..00000000000 --- a/target/linux/xburst/patches-2.6.34/002-xburst-cache-quirks.patch +++ /dev/null @@ -1,339 +0,0 @@ -From 3d317cc06fce61787e4429b98d6073e69a6b6cd7 Mon Sep 17 00:00:00 2001 -From: Lars-Peter Clausen -Date: Sat, 24 Apr 2010 17:34:29 +0200 -Subject: [PATCH] JZ4740 cache quirks - ---- - arch/mips/include/asm/r4kcache.h | 231 ++++++++++++++++++++++++++++++++++++++ - 1 files changed, 231 insertions(+), 0 deletions(-) - -diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h -index 387bf59..b500056 100644 ---- a/arch/mips/include/asm/r4kcache.h -+++ b/arch/mips/include/asm/r4kcache.h -@@ -17,6 +17,58 @@ - #include - #include - -+#ifdef CONFIG_JZRISC -+ -+#define K0_TO_K1() \ -+do { \ -+ unsigned long __k0_addr; \ -+ \ -+ __asm__ __volatile__( \ -+ "la %0, 1f\n\t" \ -+ "or %0, %0, %1\n\t" \ -+ "jr %0\n\t" \ -+ "nop\n\t" \ -+ "1: nop\n" \ -+ : "=&r"(__k0_addr) \ -+ : "r" (0x20000000) ); \ -+} while(0) -+ -+#define K1_TO_K0() \ -+do { \ -+ unsigned long __k0_addr; \ -+ __asm__ __volatile__( \ -+ "nop;nop;nop;nop;nop;nop;nop\n\t" \ -+ "la %0, 1f\n\t" \ -+ "jr %0\n\t" \ -+ "nop\n\t" \ -+ "1: nop\n" \ -+ : "=&r" (__k0_addr)); \ -+} while (0) -+ -+#define INVALIDATE_BTB() \ -+do { \ -+ unsigned long tmp; \ -+ __asm__ __volatile__( \ -+ ".set mips32\n\t" \ -+ "mfc0 %0, $16, 7\n\t" \ -+ "nop\n\t" \ -+ "ori %0, 2\n\t" \ -+ "mtc0 %0, $16, 7\n\t" \ -+ "nop\n\t" \ -+ : "=&r" (tmp)); \ -+} while (0) -+ -+#define SYNC_WB() __asm__ __volatile__ ("sync") -+ -+#else /* CONFIG_JZRISC */ -+ -+#define K0_TO_K1() do { } while (0) -+#define K1_TO_K0() do { } while (0) -+#define INVALIDATE_BTB() do { } while (0) -+#define SYNC_WB() do { } while (0) -+ -+#endif /* CONFIG_JZRISC */ -+ - /* - * This macro return a properly sign-extended address suitable as base address - * for indexed cache operations. Two issues here: -@@ -144,6 +196,7 @@ static inline void flush_icache_line_indexed(unsigned long addr) - { - __iflush_prologue - cache_op(Index_Invalidate_I, addr); -+ INVALIDATE_BTB(); - __iflush_epilogue - } - -@@ -151,6 +204,7 @@ static inline void flush_dcache_line_indexed(unsigned long addr) - { - __dflush_prologue - cache_op(Index_Writeback_Inv_D, addr); -+ SYNC_WB(); - __dflush_epilogue - } - -@@ -163,6 +217,7 @@ static inline void flush_icache_line(unsigned long addr) - { - __iflush_prologue - cache_op(Hit_Invalidate_I, addr); -+ INVALIDATE_BTB(); - __iflush_epilogue - } - -@@ -170,6 +225,7 @@ static inline void flush_dcache_line(unsigned long addr) - { - __dflush_prologue - cache_op(Hit_Writeback_Inv_D, addr); -+ SYNC_WB(); - __dflush_epilogue - } - -@@ -177,6 +233,7 @@ static inline void invalidate_dcache_line(unsigned long addr) - { - __dflush_prologue - cache_op(Hit_Invalidate_D, addr); -+ SYNC_WB(); - __dflush_epilogue - } - -@@ -209,6 +266,7 @@ static inline void flush_scache_line(unsigned long addr) - static inline void protected_flush_icache_line(unsigned long addr) - { - protected_cache_op(Hit_Invalidate_I, addr); -+ INVALIDATE_BTB(); - } - - /* -@@ -220,6 +278,7 @@ static inline void protected_flush_icache_line(unsigned long addr) - static inline void protected_writeback_dcache_line(unsigned long addr) - { - protected_cache_op(Hit_Writeback_Inv_D, addr); -+ SYNC_WB(); - } - - static inline void protected_writeback_scache_line(unsigned long addr) -@@ -396,8 +455,10 @@ static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page) - __BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16) - __BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16) - __BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16) -+#ifndef CONFIG_JZRISC - __BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32) - __BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32) -+#endif - __BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32) - __BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64) - __BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64) -@@ -405,12 +466,122 @@ __BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64) - __BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128) - - __BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16) -+#ifndef CONFIG_JZRISC - __BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32) -+#endif - __BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16) - __BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32) - __BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64) - __BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128) - -+#ifdef CONFIG_JZRISC -+ -+static inline void blast_dcache32(void) -+{ -+ unsigned long start = INDEX_BASE; -+ unsigned long end = start + current_cpu_data.dcache.waysize; -+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit; -+ unsigned long ws_end = current_cpu_data.dcache.ways << -+ current_cpu_data.dcache.waybit; -+ unsigned long ws, addr; -+ -+ for (ws = 0; ws < ws_end; ws += ws_inc) -+ for (addr = start; addr < end; addr += 0x400) -+ cache32_unroll32(addr|ws,Index_Writeback_Inv_D); -+ -+ SYNC_WB(); -+} -+ -+static inline void blast_dcache32_page(unsigned long page) -+{ -+ unsigned long start = page; -+ unsigned long end = page + PAGE_SIZE; -+ -+ do { -+ cache32_unroll32(start,Hit_Writeback_Inv_D); -+ start += 0x400; -+ } while (start < end); -+ -+ SYNC_WB(); -+} -+ -+static inline void blast_dcache32_page_indexed(unsigned long page) -+{ -+ unsigned long indexmask = current_cpu_data.dcache.waysize - 1; -+ unsigned long start = INDEX_BASE + (page & indexmask); -+ unsigned long end = start + PAGE_SIZE; -+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit; -+ unsigned long ws_end = current_cpu_data.dcache.ways << -+ current_cpu_data.dcache.waybit; -+ unsigned long ws, addr; -+ -+ for (ws = 0; ws < ws_end; ws += ws_inc) -+ for (addr = start; addr < end; addr += 0x400) -+ cache32_unroll32(addr|ws,Index_Writeback_Inv_D); -+ -+ SYNC_WB(); -+} -+ -+static inline void blast_icache32(void) -+{ -+ unsigned long start = INDEX_BASE; -+ unsigned long end = start + current_cpu_data.icache.waysize; -+ unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit; -+ unsigned long ws_end = current_cpu_data.icache.ways << -+ current_cpu_data.icache.waybit; -+ unsigned long ws, addr; -+ -+ K0_TO_K1(); -+ -+ for (ws = 0; ws < ws_end; ws += ws_inc) -+ for (addr = start; addr < end; addr += 0x400) -+ cache32_unroll32(addr|ws,Index_Invalidate_I); -+ -+ INVALIDATE_BTB(); -+ -+ K1_TO_K0(); -+} -+ -+static inline void blast_icache32_page(unsigned long page) -+{ -+ unsigned long start = page; -+ unsigned long end = page + PAGE_SIZE; -+ -+ K0_TO_K1(); -+ -+ do { -+ cache32_unroll32(start,Hit_Invalidate_I); -+ start += 0x400; -+ } while (start < end); -+ -+ INVALIDATE_BTB(); -+ -+ K1_TO_K0(); -+} -+ -+static inline void blast_icache32_page_indexed(unsigned long page) -+{ -+ unsigned long indexmask = current_cpu_data.icache.waysize - 1; -+ unsigned long start = INDEX_BASE + (page & indexmask); -+ unsigned long end = start + PAGE_SIZE; -+ unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit; -+ unsigned long ws_end = current_cpu_data.icache.ways << -+ current_cpu_data.icache.waybit; -+ unsigned long ws, addr; -+ -+ K0_TO_K1(); -+ -+ for (ws = 0; ws < ws_end; ws += ws_inc) -+ for (addr = start; addr < end; addr += 0x400) -+ cache32_unroll32(addr|ws,Index_Invalidate_I); -+ -+ INVALIDATE_BTB(); -+ -+ K1_TO_K0(); -+} -+ -+#endif /* CONFIG_JZRISC */ -+ - /* build blast_xxx_range, protected_blast_xxx_range */ - #define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \ - static inline void prot##blast_##pfx##cache##_range(unsigned long start, \ -@@ -432,13 +603,73 @@ static inline void prot##blast_##pfx##cache##_range(unsigned long start, \ - __##pfx##flush_epilogue \ - } - -+#ifndef CONFIG_JZRISC - __BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_) -+#endif - __BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_) -+#ifndef CONFIG_JZRISC - __BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_) - __BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, ) -+#endif - __BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, ) - /* blast_inv_dcache_range */ - __BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, ) - __BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, ) - -+#ifdef CONFIG_JZRISC -+ -+static inline void protected_blast_dcache_range(unsigned long start, -+ unsigned long end) -+{ -+ unsigned long lsize = cpu_dcache_line_size(); -+ unsigned long addr = start & ~(lsize - 1); -+ unsigned long aend = (end - 1) & ~(lsize - 1); -+ -+ while (1) { -+ protected_cache_op(Hit_Writeback_Inv_D, addr); -+ if (addr == aend) -+ break; -+ addr += lsize; -+ } -+ SYNC_WB(); -+} -+ -+static inline void protected_blast_icache_range(unsigned long start, -+ unsigned long end) -+{ -+ unsigned long lsize = cpu_icache_line_size(); -+ unsigned long addr = start & ~(lsize - 1); -+ unsigned long aend = (end - 1) & ~(lsize - 1); -+ -+ K0_TO_K1(); -+ -+ while (1) { -+ protected_cache_op(Hit_Invalidate_I, addr); -+ if (addr == aend) -+ break; -+ addr += lsize; -+ } -+ INVALIDATE_BTB(); -+ -+ K1_TO_K0(); -+} -+ -+static inline void blast_dcache_range(unsigned long start, -+ unsigned long end) -+{ -+ unsigned long lsize = cpu_dcache_line_size(); -+ unsigned long addr = start & ~(lsize - 1); -+ unsigned long aend = (end - 1) & ~(lsize - 1); -+ -+ while (1) { -+ cache_op(Hit_Writeback_Inv_D, addr); -+ if (addr == aend) -+ break; -+ addr += lsize; -+ } -+ SYNC_WB(); -+} -+ -+#endif /* CONFIG_JZRISC */ -+ - #endif /* _ASM_R4KCACHE_H */ --- -1.5.6.5 - diff --git a/target/linux/xburst/patches-2.6.34/005-add-qi_lb60-board-support.patch b/target/linux/xburst/patches-2.6.34/005-add-qi_lb60-board-support.patch deleted file mode 100644 index fa40d411c44..00000000000 --- a/target/linux/xburst/patches-2.6.34/005-add-qi_lb60-board-support.patch +++ /dev/null @@ -1,594 +0,0 @@ -From eb15b4f5046dbb1a530ec3e6134b1b68753e1f31 Mon Sep 17 00:00:00 2001 -From: Lars-Peter Clausen -Date: Sat, 24 Apr 2010 17:24:26 +0200 -Subject: [PATCH] Add qi_lb60 board support - ---- - arch/mips/include/asm/mach-jz4740/board-qi_lb60.h | 51 +++ - arch/mips/jz4740/Kconfig | 4 + - arch/mips/jz4740/Makefile | 2 + - arch/mips/jz4740/board-qi_lb60.c | 486 +++++++++++++++++++++ - 4 files changed, 543 insertions(+), 0 deletions(-) - create mode 100644 arch/mips/include/asm/mach-jz4740/board-qi_lb60.h - create mode 100644 arch/mips/jz4740/board-qi_lb60.c - -diff --git a/arch/mips/include/asm/mach-jz4740/board-qi_lb60.h b/arch/mips/include/asm/mach-jz4740/board-qi_lb60.h -new file mode 100644 -index 0000000..cfbf073 ---- /dev/null -+++ b/arch/mips/include/asm/mach-jz4740/board-qi_lb60.h -@@ -0,0 +1,51 @@ -+/* -+ * Copyright (c) 2009 Qi Hardware Inc., -+ * Author: Xiangfu Liu -+ * -+ * This program is free software: you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation, either version 3 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . -+ */ -+ -+#ifndef __ASM_JZ4740_QI_LB60_H__ -+#define __ASM_JZ4740_QI_LB60_H__ -+ -+#include -+ -+/* -+ * GPIO -+ */ -+#define GPIO_DC_DETE_N JZ_GPIO_PORTC(26) -+#define GPIO_CHARG_STAT_N JZ_GPIO_PORTC(27) -+#define GPIO_LED_EN JZ_GPIO_PORTC(28) -+#define GPIO_LCD_CS JZ_GPIO_PORTC(21) -+#define GPIO_DISP_OFF_N JZ_GPIO_PORTD(21) -+#define GPIO_PWM JZ_GPIO_PORTD(27) -+#define GPIO_WAKEUP_N JZ_GPIO_PORTD(29) -+ -+#define GPIO_AMP_EN JZ_GPIO_PORTD(4) -+ -+#define GPIO_SD_CD_N JZ_GPIO_PORTD(0) -+#define GPIO_SD_VCC_EN_N JZ_GPIO_PORTD(2) -+ -+#define GPIO_USB_DETE JZ_GPIO_PORTD(28) -+#define GPIO_BUZZ_PWM JZ_GPIO_PORTD(27) -+#define GPIO_UDC_HOTPLUG GPIO_USB_DETE -+ -+#define GPIO_AUDIO_POP JZ_GPIO_PORTB(29) -+#define GPIO_COB_TEST JZ_GPIO_PORTB(30) -+ -+#define GPIO_KEYOUT_BASE JZ_GPIO_PORTC(10) -+#define GPIO_KEYIN_BASE JZ_GPIO_PORTD(18) -+#define GPIO_KEYIN_8 JZ_GPIO_PORTD(26) -+ -+#endif /* __ASM_JZ4740_QI_LB60_H__ */ -diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig -index b959769..a255c1a 100644 ---- a/arch/mips/jz4740/Kconfig -+++ b/arch/mips/jz4740/Kconfig -@@ -3,6 +3,10 @@ choice - depends on MACH_JZ - default JZ4740_QI_LB60 - -+config JZ4740_QI_LB60 -+ bool "Qi Hardware Ben NanoNote" -+ select SOC_JZ4740 -+ - endchoice - - config HAVE_PWM -diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile -index 398ee91..dd27b49 100644 ---- a/arch/mips/jz4740/Makefile -+++ b/arch/mips/jz4740/Makefile -@@ -11,6 +11,8 @@ obj-$(CONFIG_DEBUG_FS) += clock-debugfs.o - - # board specific support - -+obj-$(CONFIG_JZ4740_QI_LB60) += board-qi_lb60.o -+ - # PM support - - obj-$(CONFIG_PM) += pm.o -diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c -new file mode 100644 -index 0000000..b3cc308 ---- /dev/null -+++ b/arch/mips/jz4740/board-qi_lb60.c -@@ -0,0 +1,486 @@ -+/* -+ * linux/arch/mips/jz4740/board-qi_lb60.c -+ * -+ * QI_LB60 setup routines. -+ * -+ * Copyright (c) 2009 Qi Hardware inc., -+ * Author: Xiangfu Liu -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 or later -+ * as published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+ -+#include "clock.h" -+ -+static bool is_avt2; -+ -+/* NAND */ -+static struct nand_ecclayout qi_lb60_ecclayout_1gb = { -+ .eccbytes = 36, -+ .eccpos = { -+ 6, 7, 8, 9, 10, 11, 12, 13, -+ 14, 15, 16, 17, 18, 19, 20, 21, -+ 22, 23, 24, 25, 26, 27, 28, 29, -+ 30, 31, 32, 33, 34, 35, 36, 37, -+ 38, 39, 40, 41}, -+ .oobfree = { -+ {.offset = 2, -+ .length = 4}, -+ {.offset = 42, -+ .length = 22}} -+}; -+ -+static struct mtd_partition qi_lb60_partitions_1gb[] = { -+ { .name = "NAND BOOT partition", -+ .offset = 0 * 0x100000, -+ .size = 4 * 0x100000, -+ }, -+ { .name = "NAND KERNEL partition", -+ .offset = 4 * 0x100000, -+ .size = 4 * 0x100000, -+ }, -+ { .name = "NAND ROOTFS partition", -+ .offset = 8 * 0x100000, -+ .size = (504 + 512) * 0x100000, -+ }, -+}; -+ -+static struct nand_ecclayout qi_lb60_ecclayout_2gb = { -+ .eccbytes = 72, -+ .eccpos = { -+ 12, 13, 14, 15, 16, 17, 18, 19, -+ 20, 21, 22, 23, 24, 25, 26, 27, -+ 28, 29, 30, 31, 32, 33, 34, 35, -+ 36, 37, 38, 39, 40, 41, 42, 43, -+ 44, 45, 46, 47, 48, 49, 50, 51, -+ 52, 53, 54, 55, 56, 57, 58, 59, -+ 60, 61, 62, 63, 64, 65, 66, 67, -+ 68, 69, 70, 71, 72, 73, 74, 75, -+ 76, 77, 78, 79, 80, 81, 82, 83}, -+ .oobfree = { -+ { .offset = 2, .length = 10}, -+ { .offset = 84, .length = 44}, -+ }, -+}; -+ -+static struct mtd_partition qi_lb60_partitions_2gb[] = { -+ { .name = "NAND BOOT partition", -+ .offset = 0 * 0x100000, -+ .size = 4 * 0x100000, -+ }, -+ { .name = "NAND KERNEL partition", -+ .offset = 4 * 0x100000, -+ .size = 4 * 0x100000, -+ }, -+ { .name = "NAND ROOTFS partition", -+ .offset = 8 * 0x100000, -+ .size = (504 + 512 + 1024) * 0x100000, -+ }, -+}; -+ -+static void qi_lb60_nand_ident(struct platform_device *pdev, -+ struct nand_chip *chip, struct mtd_partition **partitions, -+ int *num_partitions) -+{ -+ if (chip->page_shift == 12) { -+ chip->ecc.layout = &qi_lb60_ecclayout_2gb; -+ *partitions = qi_lb60_partitions_2gb; -+ *num_partitions = ARRAY_SIZE(qi_lb60_partitions_2gb); -+ } else { -+ chip->ecc.layout = &qi_lb60_ecclayout_1gb; -+ *partitions = qi_lb60_partitions_1gb; -+ *num_partitions = ARRAY_SIZE(qi_lb60_partitions_1gb); -+ } -+} -+ -+static struct jz_nand_platform_data qi_lb60_nand_pdata = { -+ .ident_callback = qi_lb60_nand_ident, -+ .busy_gpio = 94, -+}; -+ -+/* Keyboard*/ -+ -+/* #define KEEP_UART_ALIVE -+ * don't define this. the keyboard and keyboard both work -+ */ -+ -+#define KEY_QI_QI KEY_F13 -+#define KEY_QI_UPRED KEY_RIGHTALT -+#define KEY_QI_VOLUP KEY_VOLUMEUP -+#define KEY_QI_VOLDOWN KEY_VOLUMEDOWN -+#define KEY_QI_FN KEY_LEFTCTRL -+ -+static const uint32_t qi_lb60_keymap[] = { -+ KEY(0, 0, KEY_F1), /* S2 */ -+ KEY(0, 1, KEY_F2), /* S3 */ -+ KEY(0, 2, KEY_F3), /* S4 */ -+ KEY(0, 3, KEY_F4), /* S5 */ -+ KEY(0, 4, KEY_F5), /* S6 */ -+ KEY(0, 5, KEY_F6), /* S7 */ -+ KEY(0, 6, KEY_F7), /* S8 */ -+ -+ KEY(1, 0, KEY_Q), /* S10 */ -+ KEY(1, 1, KEY_W), /* S11 */ -+ KEY(1, 2, KEY_E), /* S12 */ -+ KEY(1, 3, KEY_R), /* S13 */ -+ KEY(1, 4, KEY_T), /* S14 */ -+ KEY(1, 5, KEY_Y), /* S15 */ -+ KEY(1, 6, KEY_U), /* S16 */ -+ KEY(1, 7, KEY_I), /* S17 */ -+ KEY(2, 0, KEY_A), /* S18 */ -+ KEY(2, 1, KEY_S), /* S19 */ -+ KEY(2, 2, KEY_D), /* S20 */ -+ KEY(2, 3, KEY_F), /* S21 */ -+ KEY(2, 4, KEY_G), /* S22 */ -+ KEY(2, 5, KEY_H), /* S23 */ -+ KEY(2, 6, KEY_J), /* S24 */ -+ KEY(2, 7, KEY_K), /* S25 */ -+ KEY(3, 0, KEY_ESC), /* S26 */ -+ KEY(3, 1, KEY_Z), /* S27 */ -+ KEY(3, 2, KEY_X), /* S28 */ -+ KEY(3, 3, KEY_C), /* S29 */ -+ KEY(3, 4, KEY_V), /* S30 */ -+ KEY(3, 5, KEY_B), /* S31 */ -+ KEY(3, 6, KEY_N), /* S32 */ -+ KEY(3, 7, KEY_M), /* S33 */ -+ KEY(4, 0, KEY_TAB), /* S34 */ -+ KEY(4, 1, KEY_CAPSLOCK), /* S35 */ -+ KEY(4, 2, KEY_BACKSLASH), /* S36 */ -+ KEY(4, 3, KEY_APOSTROPHE), /* S37 */ -+ KEY(4, 4, KEY_COMMA), /* S38 */ -+ KEY(4, 5, KEY_DOT), /* S39 */ -+ KEY(4, 6, KEY_SLASH), /* S40 */ -+ KEY(4, 7, KEY_UP), /* S41 */ -+ KEY(5, 0, KEY_O), /* S42 */ -+ KEY(5, 1, KEY_L), /* S43 */ -+ KEY(5, 2, KEY_EQUAL), /* S44 */ -+ KEY(5, 3, KEY_QI_UPRED), /* S45 */ -+ KEY(5, 4, KEY_SPACE), /* S46 */ -+ KEY(5, 5, KEY_QI_QI), /* S47 */ -+ KEY(5, 6, KEY_RIGHTCTRL), /* S48 */ -+ KEY(5, 7, KEY_LEFT), /* S49 */ -+ KEY(6, 0, KEY_F8), /* S50 */ -+ KEY(6, 1, KEY_P), /* S51 */ -+ KEY(6, 2, KEY_BACKSPACE),/* S52 */ -+ KEY(6, 3, KEY_ENTER), /* S53 */ -+ KEY(6, 4, KEY_QI_VOLUP), /* S54 */ -+ KEY(6, 5, KEY_QI_VOLDOWN), /* S55 */ -+ KEY(6, 6, KEY_DOWN), /* S56 */ -+ KEY(6, 7, KEY_RIGHT), /* S57 */ -+ -+#ifndef KEEP_UART_ALIVE -+ KEY(7, 0, KEY_LEFTSHIFT), /* S58 */ -+ KEY(7, 1, KEY_LEFTALT), /* S59 */ -+ KEY(7, 2, KEY_QI_FN), /* S60 */ -+#endif -+}; -+ -+static const struct matrix_keymap_data qi_lb60_keymap_data = { -+ .keymap = qi_lb60_keymap, -+ .keymap_size = ARRAY_SIZE(qi_lb60_keymap), -+}; -+ -+static const unsigned int qi_lb60_keypad_cols[] = { -+ 74, 75, 76, 77, 78, 79, 80, 81, -+}; -+ -+static const unsigned int qi_lb60_keypad_rows[] = { -+ 114, 115, 116, 117, 118, 119, 120, -+#ifndef KEEP_UART_ALIVE -+ 122, -+#endif -+}; -+ -+static struct matrix_keypad_platform_data qi_lb60_pdata = { -+ .keymap_data = &qi_lb60_keymap_data, -+ .col_gpios = qi_lb60_keypad_cols, -+ .row_gpios = qi_lb60_keypad_rows, -+ .num_col_gpios = ARRAY_SIZE(qi_lb60_keypad_cols), -+ .num_row_gpios = ARRAY_SIZE(qi_lb60_keypad_rows), -+ .col_scan_delay_us = 10, -+ .debounce_ms = 10, -+ .wakeup = 1, -+ .active_low = 1, -+}; -+ -+static struct platform_device qi_lb60_keypad = { -+ .name = "matrix-keypad", -+ .id = -1, -+ .dev = { -+ .platform_data = &qi_lb60_pdata, -+ }, -+}; -+ -+/* Display */ -+static struct fb_videomode qi_lb60_video_modes[] = { -+ { -+ .name = "320x240", -+ .xres = 320, -+ .yres = 240, -+ .refresh = 30, -+ .left_margin = 140, -+ .right_margin = 273, -+ .upper_margin = 20, -+ .lower_margin = 2, -+ .hsync_len = 1, -+ .vsync_len = 1, -+ .sync = 0, -+ .vmode = FB_VMODE_NONINTERLACED, -+ }, -+}; -+ -+static struct jz4740_fb_platform_data qi_lb60_fb_pdata = { -+ .width = 60, -+ .height = 45, -+ .num_modes = ARRAY_SIZE(qi_lb60_video_modes), -+ .modes = qi_lb60_video_modes, -+ .bpp = 24, -+ .lcd_type = JZ_LCD_TYPE_8BIT_SERIAL, -+ .pixclk_falling_edge = 1, -+}; -+ -+ -+struct spi_gpio_platform_data spigpio_platform_data = { -+ .sck = JZ_GPIO_PORTC(23), -+ .mosi = JZ_GPIO_PORTC(22), -+ .miso = -1, -+ .num_chipselect = 1, -+}; -+ -+static struct platform_device spigpio_device = { -+ .name = "spi_gpio", -+ .id = 1, -+ .dev = { -+ .platform_data = &spigpio_platform_data, -+ }, -+}; -+ -+static struct spi_board_info qi_lb60_spi_board_info[] = { -+ { -+ .modalias = "gpm940b0", -+ .controller_data = (void *)JZ_GPIO_PORTC(21), -+ .chip_select = 0, -+ .bus_num = 1, -+ .max_speed_hz = 30 * 1000, -+ .mode = SPI_3WIRE, -+ }, -+}; -+ -+/* Battery */ -+static struct jz_battery_platform_data qi_lb60_battery_pdata = { -+ .gpio_charge = GPIO_CHARG_STAT_N, -+ .gpio_charge_active_low = 1, -+ .info = { -+ .name = "battery", -+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, -+ .voltage_max_design = 4200000, -+ .voltage_min_design = 3600000, -+ }, -+}; -+ -+static char *qi_lb60_batteries[] = { -+ "battery", -+}; -+ -+static struct gpio_charger_platform_data qi_lb60_charger_pdata = { -+ .name = "USB", -+ .type = POWER_SUPPLY_TYPE_USB, -+ .gpio = GPIO_USB_DETE, -+ .gpio_active_low = 1, -+ .batteries = qi_lb60_batteries, -+ .num_batteries = ARRAY_SIZE(qi_lb60_batteries), -+}; -+ -+static struct platform_device qi_lb60_charger_device = { -+ .name = "gpio-charger", -+ .dev = { -+ .platform_data = &qi_lb60_charger_pdata, -+ }, -+}; -+ -+/* GPIO Key: power */ -+static struct gpio_keys_button qi_lb60_gpio_keys_buttons[] = { -+ [0] = { -+ .code = KEY_POWER, -+ .gpio = GPIO_WAKEUP_N, -+ .active_low = 1, -+ .desc = "Power", -+ .wakeup = 1, -+ }, -+}; -+ -+static struct gpio_keys_platform_data qi_lb60_gpio_keys_data = { -+ .nbuttons = ARRAY_SIZE(qi_lb60_gpio_keys_buttons), -+ .buttons = qi_lb60_gpio_keys_buttons, -+}; -+ -+static struct platform_device qi_lb60_gpio_keys = { -+ .name = "gpio-keys", -+ .id = -1, -+ .dev = { -+ .platform_data = &qi_lb60_gpio_keys_data, -+ } -+}; -+ -+static struct jz4740_mmc_platform_data qi_lb60_mmc_pdata = { -+ .gpio_card_detect = JZ_GPIO_PORTD(0), -+ .gpio_read_only = -1, -+ .gpio_power = JZ_GPIO_PORTD(2), -+ .power_active_low = 1, -+}; -+ -+static struct regulator_consumer_supply avt2_usb_regulator_consumer = -+ REGULATOR_SUPPLY("vbus", "jz4740-ohci"); -+ -+static struct regulator_init_data avt2_usb_regulator_init_data = { -+ .num_consumer_supplies = 1, -+ .consumer_supplies = &avt2_usb_regulator_consumer, -+ .constraints = { -+ .name = "USB power", -+ .min_uV = 5000000, -+ .max_uV = 5000000, -+ .valid_modes_mask = REGULATOR_MODE_NORMAL, -+ .valid_ops_mask = REGULATOR_CHANGE_STATUS, -+ }, -+}; -+ -+static struct fixed_voltage_config avt2_usb_regulator_data = { -+ .supply_name = "USB power", -+ .microvolts = 5000000, -+ .gpio = JZ_GPIO_PORTB(17), -+ .init_data = &avt2_usb_regulator_init_data, -+}; -+ -+static struct platform_device avt2_usb_regulator_device = { -+ .name = "reg-fixed-voltage", -+ .id = -1, -+ .dev = { -+ .platform_data = &avt2_usb_regulator_data, -+ } -+}; -+ -+static struct led_pwm qi_lb60_pizo_led = { -+ .name = "nanonote::pizo", -+ .pwm_id = 4, -+ .max_brightness = 255, -+ .pwm_period_ns = 1000000, -+}; -+ -+static struct led_pwm_platform_data qi_lb60_pizo_data = { -+ .num_leds = 1, -+ .leds = &qi_lb60_pizo_led, -+}; -+ -+static struct platform_device qi_lb60_pizo_device = { -+ .name = "leds_pwm", -+ .id = -1, -+ .dev = { -+ .platform_data = &qi_lb60_pizo_data, -+ } -+}; -+ -+static struct platform_device *jz_platform_devices[] __initdata = { -+ &jz4740_usb_gdt_device, -+ &jz4740_mmc_device, -+ &jz4740_nand_device, -+ &qi_lb60_keypad, -+ &spigpio_device, -+ &jz4740_framebuffer_device, -+ &jz4740_i2s_device, -+ &jz4740_codec_device, -+ &jz4740_rtc_device, -+ &jz4740_adc_device, -+ &jz4740_battery_device, -+ &qi_lb60_gpio_keys, -+ &qi_lb60_charger_device, -+ &qi_lb60_pizo_device, -+}; -+ -+static void __init board_gpio_setup(void) -+{ -+ /* We only need to enable/disable pullup here for pins used in generic -+ * drivers. Everything else is done by the drivers themselfs. */ -+ jz_gpio_disable_pullup(GPIO_SD_VCC_EN_N); -+ jz_gpio_disable_pullup(GPIO_SD_CD_N); -+} -+ -+static int __init qi_lb60_init_platform_devices(void) -+{ -+ jz4740_framebuffer_device.dev.platform_data = &qi_lb60_fb_pdata; -+ jz4740_nand_device.dev.platform_data = &qi_lb60_nand_pdata; -+ jz4740_battery_device.dev.platform_data = &qi_lb60_battery_pdata; -+ jz4740_mmc_device.dev.platform_data = &qi_lb60_mmc_pdata; -+ -+ spi_register_board_info(qi_lb60_spi_board_info, -+ ARRAY_SIZE(qi_lb60_spi_board_info)); -+ -+ if (is_avt2) { -+ platform_device_register(&avt2_usb_regulator_device); -+ platform_device_register(&jz4740_usb_ohci_device); -+ } -+ -+ return platform_add_devices(jz_platform_devices, -+ ARRAY_SIZE(jz_platform_devices)); -+ -+} -+ -+struct jz4740_clock_board_data jz4740_clock_bdata = { -+ .ext_rate = 12000000, -+ .rtc_rate = 32768, -+}; -+ -+extern int jz_gpiolib_init(void); -+ -+static __init int board_avt2(char *str) -+{ -+ qi_lb60_mmc_pdata.card_detect_active_low = 1; -+ qi_lb60_mmc_pdata.power_active_low = 1; -+ is_avt2 = true; -+ -+ return 1; -+} -+ -+__setup("avt2", board_avt2); -+ -+static int __init qi_lb60_board_setup(void) -+{ -+ printk(KERN_INFO "Qi Hardware JZ4740 QI_LB60 setup\n"); -+ if (jz_gpiolib_init()) -+ panic("Failed to initalize jz gpio\n"); -+ -+ jz4740_clock_init(); -+ board_gpio_setup(); -+ -+ if (qi_lb60_init_platform_devices()) -+ panic("Failed to initalize platform devices\n"); -+ -+ return 0; -+} -+ -+arch_initcall(qi_lb60_board_setup); --- -1.5.6.5 - diff --git a/target/linux/xburst/patches-2.6.34/006-add-n516-board-support.patch b/target/linux/xburst/patches-2.6.34/006-add-n516-board-support.patch deleted file mode 100644 index 5f845d3324b..00000000000 --- a/target/linux/xburst/patches-2.6.34/006-add-n516-board-support.patch +++ /dev/null @@ -1,702 +0,0 @@ -From 49f148f79887cec83c4b051c104072d770a6a9af Mon Sep 17 00:00:00 2001 -From: Lars-Peter Clausen -Date: Sat, 24 Apr 2010 17:25:01 +0200 -Subject: [PATCH] Add n516 board support - ---- - arch/mips/include/asm/mach-jz4740/board-n516.h | 39 +++ - arch/mips/jz4740/Kconfig | 4 + - arch/mips/jz4740/Makefile | 1 + - arch/mips/jz4740/board-n516-display.c | 393 ++++++++++++++++++++++++ - arch/mips/jz4740/board-n516.c | 206 +++++++++++++ - 5 files changed, 643 insertions(+), 0 deletions(-) - create mode 100644 arch/mips/include/asm/mach-jz4740/board-n516.h - create mode 100644 arch/mips/jz4740/board-n516-display.c - create mode 100644 arch/mips/jz4740/board-n516.c - -diff --git a/arch/mips/include/asm/mach-jz4740/board-n516.h b/arch/mips/include/asm/mach-jz4740/board-n516.h -new file mode 100644 -index 0000000..f3f1e0a ---- /dev/null -+++ b/arch/mips/include/asm/mach-jz4740/board-n516.h -@@ -0,0 +1,39 @@ -+/* -+ * linux/include/asm-mips/mach-jz4740/board-n516.h -+ * -+ * JZ4730-based N516 board definition. -+ * -+ * Copyright (C) 2009, Yauhen Kharuzhy -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef __ASM_JZ4740_N516_H__ -+#define __ASM_JZ4740_N516_H__ -+ -+#include -+ -+/* -+ * GPIO -+ */ -+#define GPIO_SD_VCC_EN_N JZ_GPIO_PORTD(17) -+#define GPIO_SD_CD_N JZ_GPIO_PORTD(7) -+#define GPIO_SD_WP JZ_GPIO_PORTD(15) -+#define GPIO_USB_DETECT JZ_GPIO_PORTD(19) -+#define GPIO_CHARG_STAT_N JZ_GPIO_PORTD(16) -+#define GPIO_LED_ENABLE JZ_GPIO_PORTD(28) -+#define GPIO_LPC_INT JZ_GPIO_PORTD(14) -+#define GPIO_HPHONE_DETECT JZ_GPIO_PORTD(20) -+#define GPIO_SPEAKER_ENABLE JZ_GPIO_PORTD(21) -+ -+/* Display */ -+#define GPIO_DISPLAY_RST_L JZ_GPIO_PORTB(18) -+#define GPIO_DISPLAY_RDY JZ_GPIO_PORTB(17) -+#define GPIO_DISPLAY_STBY JZ_GPIO_PORTC(22) -+#define GPIO_DISPLAY_ERR JZ_GPIO_PORTC(23) -+#define GPIO_DISPLAY_OFF JZ_GPIO_PORTD(1) -+ -+#endif /* __ASM_JZ4740_N516_H__ */ -diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig -index 3de3b99..b987c27 100644 ---- a/arch/mips/jz4740/Kconfig -+++ b/arch/mips/jz4740/Kconfig -@@ -7,6 +7,10 @@ config JZ4740_QI_LB60 - bool "Qi Hardware Ben NanoNote" - select SOC_JZ4740 - -+config JZ4740_N516 -+ bool "Hanvon n516 eBook reader" -+ select SOC_JZ4740 -+ - endchoice - - config HAVE_PWM -diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile -index deca88e..9ed5e5b 100644 ---- a/arch/mips/jz4740/Makefile -+++ b/arch/mips/jz4740/Makefile -@@ -12,6 +12,7 @@ obj-$(CONFIG_DEBUG_FS) += clock-debugfs.o - # board specific support - - obj-$(CONFIG_JZ4740_QI_LB60) += board-qi_lb60.o -+obj-$(CONFIG_JZ4740_N516) += board-n516.o board-n516-display.o - - # PM support - -diff --git a/arch/mips/jz4740/board-n516-display.c b/arch/mips/jz4740/board-n516-display.c -new file mode 100644 -index 0000000..44d8237 ---- /dev/null -+++ b/arch/mips/jz4740/board-n516-display.c -@@ -0,0 +1,393 @@ -+/* -+ * board-n516-display.c -- Platform device for N516 display -+ * -+ * Copyright (C) 2009, Yauhen Kharuzhy -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file COPYING in the main directory of this archive for -+ * more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include