From a4d450380cb544fbdb292f7dcc5f4db39bbcdbc5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 4 May 2015 11:22:56 -0300 Subject: [PATCH] mx6cuboxi: Pull down PAD_ENET_RXD0/RXD1 Configure PAD_ENET_RXD0/RXD1 pads as pull down because these pads are directly connected to the Atheros 8035/8030 although they should be functional only in the RMII mode - 8030. Signed-off-by: Rabeeh Khoury Signed-off-by: Fabio Estevam Reviewed-by: Stefano Babic Reviewed-by: Tom Rini Tested-By: Vagrant Cascadian --- board/solidrun/mx6cuboxi/mx6cuboxi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c index e83d2fe7dc..d15c726a01 100644 --- a/board/solidrun/mx6cuboxi/mx6cuboxi.c +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c @@ -134,6 +134,8 @@ static iomux_v3_cfg_t const enet_pads[] = { IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)), IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)), IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)), + IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)), + IOMUX_PADS(PAD_ENET_RXD1__GPIO1_IO26 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)), }; static void setup_iomux_enet(void) -- 2.30.2