From a4a73e1f0283850edc143d28502c1c517c6ab49c Mon Sep 17 00:00:00 2001 From: "Antonino A. Daplas" Date: Mon, 26 Jun 2006 00:27:07 -0700 Subject: [PATCH] [PATCH] Detaching fbcon: update documentation Update Documentation/fb/fbcon.txt on the following: 1. sysfs attributes are now located in class/graphics/fbcon 2. instructions on how to attach, detach and/or unload fbcon Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/fb/fbcon.txt | 104 +++++++++++++++++++++++++++++++++++-- 1 file changed, 100 insertions(+), 4 deletions(-) diff --git a/Documentation/fb/fbcon.txt b/Documentation/fb/fbcon.txt index 08dce0f631bf..f3a3be087707 100644 --- a/Documentation/fb/fbcon.txt +++ b/Documentation/fb/fbcon.txt @@ -135,10 +135,10 @@ C. Boot options The angle can be changed anytime afterwards by 'echoing' the same numbers to any one of the 2 attributes found in - /sys/class/graphics/fb{x} + /sys/class/graphics/fbcon - con_rotate - rotate the display of the active console - con_rotate_all - rotate the display of all consoles + rotate - rotate the display of the active console + rotate_all - rotate the display of all consoles Console rotation will only become available if Console Rotation Support is compiled in your kernel. @@ -148,5 +148,101 @@ C. Boot options Actually, the underlying fb driver is totally ignorant of console rotation. ---- +C. Attaching, Detaching and Unloading + +It's possible to detach/attach the framebuffer console from the vt layer by +echoing anything to the following sysfs attributes found +/sys/class/graphics/fbcon. + + attach - attach framebuffer console to vt layer + detach - detach framebuffer console to vt layer + +If fbcon is detached from the vt layer, your boot console driver (which is +usually VGA text mode) will take over. A few drivers (rivafb and i810fb) will +restore VGA text mode for you. With the rest, before detaching fbcon, you +must take a few additional steps to make sure that your VGA text mode is +restored properly. The following is one of the several methods that you can do: + +1. Download or install vbetool. This utility is included with most + distributions nowadays, and is usually part of the suspend/resume tool. + +2. In your kernel configuration, ensure that CONFIG_FRAMEBUFFER_CONSOLE is set + to 'y' or 'm'. Enable one or more of your favorite framebuffer drivers. + +3. Boot into text mode and as root run: + + vbetool vbestate save > + + The above command saves the register contents of your graphics + hardware to . You need to do this step only once as + the state file can be reused. + +4. If fbcon is compiled as a module, load fbcon by doing: + + modprobe fbcon + +5. Now to detach fbcon: + + vbetool vbestate restore < && \ + echo 1 > /sys/class/graphics/fbcon/detach + +6. That's it, you're back to VGA mode. And if you compiled your drivers as + modules, you can unload them at will. So if you want to change your driver + from xxxfb to yyyfb, you can do this: + + detach fbcon + rmmod xxxfb + modprobe yyyfb + + Of course, con2fbmap can do the same thing but will not work if xxxfb + and yyyfb are not compatible (ie, cannot be loaded at the same time). + +7. To reattach fbcon: + + echo 1 > /sys/class/graphics/fbcon/attach + +8. Once the framebuffer console is detached, and if it is compiled as a module, +the module can be unloaded with 'rmmod fbcon'. This feature is great for +developers. + +Notes for vesafb users: +======================= + +Unfortunately, if your bootline includes a vga=xxx parameter that sets the +hardware in graphics mode, such as when loading vesafb, vgacon will not load. +Instead, vgacon will replace the default boot console with dummycon, and you +won't get any display after detaching fbcon. Your machine is still alive, so +you can reattach vesafb. However, to reattach vesafb, you need to do one of +the following: + +Variation 1: + + a. Before detaching fbcon, do + + vbetool vbemode save > # do once for each vesafb mode, + # the file can be reused + + b. Detach fbcon as in step 5. + + c. Attach fbcon + + vbetool vbestate restore < && \ + echo 1 > /sys/class/graphics/fbcon/attach + +Variation 2: + + a. Before detaching fbcon, do: + + vbetool vbemode get + + b. Take note of the mode number + + b. Detach fbcon as in step 5. + + c. Attach fbcon: + + vbetool vbemode set && \ + echo 1 > /sys/class/graphics/fbcon/attach + +-- Antonino Daplas -- 2.30.2