From a283bd37d00e92e8874ca6325ae071691d4db388 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 24 May 2005 12:06:38 -0500 Subject: [PATCH] [SCSI] Add target alloc/destroy callbacks to the host template This gives the HBA driver notice when a target is created and destroyed to allow it to manage its own target based allocations accordingly. This is a much reduced verson of the original patch sent in by James.Smart@Emulex.com Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 24 +++++++++++++++++++++--- include/scsi/scsi_device.h | 4 +++- include/scsi/scsi_host.h | 25 +++++++++++++++++++++++++ 3 files changed, 49 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 588611568d14..4d273ceb1d09 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -293,6 +293,10 @@ static void scsi_target_dev_release(struct device *dev) { struct device *parent = dev->parent; struct scsi_target *starget = to_scsi_target(dev); + struct Scsi_Host *shost = dev_to_shost(parent); + + if (shost->hostt->target_destroy) + shost->hostt->target_destroy(starget); kfree(starget); put_device(parent); } @@ -360,9 +364,23 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, list_add_tail(&starget->siblings, &shost->__targets); spin_unlock_irqrestore(shost->host_lock, flags); /* allocate and add */ - transport_setup_device(&starget->dev); - device_add(&starget->dev); - transport_add_device(&starget->dev); + transport_setup_device(dev); + device_add(dev); + transport_add_device(dev); + if (shost->hostt->target_alloc) { + int error = shost->hostt->target_alloc(starget); + + if(error) { + dev_printk(KERN_ERR, dev, "target allocation failed, error %d\n", error); + /* don't want scsi_target_reap to do the final + * put because it will be under the host lock */ + get_device(dev); + scsi_target_reap(starget); + put_device(dev); + return NULL; + } + } + return starget; found: diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index c018020d9160..63c91dd85ca1 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -154,7 +154,9 @@ struct scsi_target { unsigned int id; /* target id ... replace * scsi_device.id eventually */ unsigned long create:1; /* signal that it needs to be added */ - unsigned long starget_data[0]; + void *hostdata; /* available to low-level driver */ + unsigned long starget_data[0]; /* for the transport */ + /* starget_data must be the last element!!!! */ } __attribute__((aligned(sizeof(unsigned long)))); #define to_scsi_target(d) container_of(d, struct scsi_target, dev) diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index 1cee1e100943..db9914adeac9 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -10,6 +10,7 @@ struct block_device; struct module; struct scsi_cmnd; struct scsi_device; +struct scsi_target; struct Scsi_Host; struct scsi_host_cmd_pool; struct scsi_transport_template; @@ -227,6 +228,30 @@ struct scsi_host_template { */ void (* slave_destroy)(struct scsi_device *); + /* + * Before the mid layer attempts to scan for a new device attached + * to a target where no target currently exists, it will call this + * entry in your driver. Should your driver need to allocate any + * structs or perform any other init items in order to send commands + * to a currently unused target, then this is where you can perform + * those allocations. + * + * Return values: 0 on success, non-0 on failure + * + * Status: OPTIONAL + */ + int (* target_alloc)(struct scsi_target *); + + /* + * Immediately prior to deallocating the target structure, and + * after all activity to attached scsi devices has ceased, the + * midlayer calls this point so that the driver may deallocate + * and terminate any references to the target. + * + * Status: OPTIONAL + */ + void (* target_destroy)(struct scsi_target *); + /* * fill in this function to allow the queue depth of this host * to be changeable (on a per device basis). returns either -- 2.30.2