From a2358783875580fc7ad5e1554cb1a74a79360df6 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Sun, 4 Jan 2015 17:07:14 +0800 Subject: [PATCH] spi:fsl-quadspi support bank register read write To support bigger than 16MB size qspi flashes, spi framework uses bank switch to access higher bank or lower bank. In this patch, QSPI_CMD_BRRD, QSPI_CMD_BRWR, QSPI_CMD_WREAR, QSPI_CMD_RDEAR is initialized in LUT register with related pad and length configuration. qspi_op_pp is originally for page programming, this patch reuses this function for bank register switch and renamed it with qspi_op_write. Since bank or EAR register is only 1 byte length, however original qspi_op_pp or now renamed qspi_op_write only support 4 bytes lenght as the access unit, this will trigger data abort exception when access EAR or bank register. This is because upper framework passes a 1 bytes pointer to qspi_op_write, however qspi_op_write treat it as an int pointer. This patch fixes this for accessing EAR or bank register. Signed-off-by: Peng Fan Reviewed-by: Jagannadha Sutradharudu Teki --- drivers/spi/fsl_qspi.c | 160 +++++++++++++++++++++++++++++++++++++---- 1 file changed, 145 insertions(+), 15 deletions(-) diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c index d12f4201d6..ad4f4ced17 100644 --- a/drivers/spi/fsl_qspi.c +++ b/drivers/spi/fsl_qspi.c @@ -33,6 +33,12 @@ #define SEQID_PP 6 #define SEQID_RDID 7 #define SEQID_BE_4K 8 +#ifdef CONFIG_SPI_FLASH_BAR +#define SEQID_BRRD 9 +#define SEQID_BRWR 10 +#define SEQID_RDEAR 11 +#define SEQID_WREAR 12 +#endif /* QSPI CMD */ #define QSPI_CMD_PP 0x02 /* Page program (up to 256 bytes) */ @@ -44,6 +50,14 @@ #define QSPI_CMD_SE 0xd8 /* Sector erase (usually 64KiB) */ #define QSPI_CMD_RDID 0x9f /* Read JEDEC ID */ +/* Used for Micron, winbond and Macronix flashes */ +#define QSPI_CMD_WREAR 0xc5 /* EAR register write */ +#define QSPI_CMD_RDEAR 0xc8 /* EAR reigster read */ + +/* Used for Spansion flashes only. */ +#define QSPI_CMD_BRRD 0x16 /* Bank register read */ +#define QSPI_CMD_BRWR 0x17 /* Bank register write */ + /* 4-byte address QSPI CMD - used on Spansion and some Macronix flashes */ #define QSPI_CMD_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */ #define QSPI_CMD_PP_4B 0x12 /* Page program (up to 256 bytes) */ @@ -114,6 +128,11 @@ static void qspi_set_lut(struct fsl_qspi *qspi) /* Fast Read */ lut_base = SEQID_FAST_READ * 4; +#ifdef CONFIG_SPI_FLASH_BAR + qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_FAST_READ) | + PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | + PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); +#else if (FSL_QSPI_FLASH_SIZE <= SZ_16M) qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_FAST_READ) | PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | @@ -124,6 +143,7 @@ static void qspi_set_lut(struct fsl_qspi *qspi) PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) | PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); +#endif qspi_write32(®s->lut[lut_base + 1], OPRND0(8) | PAD0(LUT_PAD1) | INSTR0(LUT_DUMMY) | OPRND1(RX_BUFFER_SIZE) | PAD1(LUT_PAD1) | INSTR1(LUT_READ)); @@ -141,6 +161,11 @@ static void qspi_set_lut(struct fsl_qspi *qspi) /* Erase a sector */ lut_base = SEQID_SE * 4; +#ifdef CONFIG_SPI_FLASH_BAR + qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_SE) | + PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | + PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); +#else if (FSL_QSPI_FLASH_SIZE <= SZ_16M) qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_SE) | PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | @@ -149,6 +174,7 @@ static void qspi_set_lut(struct fsl_qspi *qspi) qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_SE_4B) | PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) | PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); +#endif qspi_write32(®s->lut[lut_base + 1], 0); qspi_write32(®s->lut[lut_base + 2], 0); qspi_write32(®s->lut[lut_base + 3], 0); @@ -163,6 +189,11 @@ static void qspi_set_lut(struct fsl_qspi *qspi) /* Page Program */ lut_base = SEQID_PP * 4; +#ifdef CONFIG_SPI_FLASH_BAR + qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_PP) | + PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | + PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); +#else if (FSL_QSPI_FLASH_SIZE <= SZ_16M) qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_PP) | PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | @@ -171,6 +202,7 @@ static void qspi_set_lut(struct fsl_qspi *qspi) qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_PP_4B) | PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) | PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); +#endif #ifdef CONFIG_MX6SX /* * To MX6SX, OPRND0(TX_BUFFER_SIZE) can not work correctly. @@ -200,6 +232,32 @@ static void qspi_set_lut(struct fsl_qspi *qspi) PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); +#ifdef CONFIG_SPI_FLASH_BAR + /* + * BRRD BRWR RDEAR WREAR are all supported, because it is hard to + * dynamically check whether to set BRRD BRWR or RDEAR WREAR during + * initialization. + */ + lut_base = SEQID_BRRD * 4; + qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_BRRD) | + PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) | + PAD1(LUT_PAD1) | INSTR1(LUT_READ)); + + lut_base = SEQID_BRWR * 4; + qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_BRWR) | + PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) | + PAD1(LUT_PAD1) | INSTR1(LUT_WRITE)); + + lut_base = SEQID_RDEAR * 4; + qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_RDEAR) | + PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) | + PAD1(LUT_PAD1) | INSTR1(LUT_READ)); + + lut_base = SEQID_WREAR * 4; + qspi_write32(®s->lut[lut_base], OPRND0(QSPI_CMD_WREAR) | + PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) | + PAD1(LUT_PAD1) | INSTR1(LUT_WRITE)); +#endif /* Lock the LUT */ qspi_write32(®s->lutkey, LUT_KEY_VALUE); qspi_write32(®s->lckcr, QSPI_LCKCR_LOCK); @@ -293,6 +351,47 @@ int spi_claim_bus(struct spi_slave *slave) return 0; } +#ifdef CONFIG_SPI_FLASH_BAR +/* Bank register read/write, EAR register read/write */ +static void qspi_op_rdbank(struct fsl_qspi *qspi, u8 *rxbuf, u32 len) +{ + struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)qspi->reg_base; + u32 reg, mcr_reg, data, seqid; + + mcr_reg = qspi_read32(®s->mcr); + qspi_write32(®s->mcr, QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK | + QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE); + qspi_write32(®s->rbct, QSPI_RBCT_RXBRD_USEIPS); + + qspi_write32(®s->sfar, qspi->amba_base); + + if (qspi->cur_seqid == QSPI_CMD_BRRD) + seqid = SEQID_BRRD; + else + seqid = SEQID_RDEAR; + + qspi_write32(®s->ipcr, (seqid << QSPI_IPCR_SEQID_SHIFT) | len); + + /* Wait previous command complete */ + while (qspi_read32(®s->sr) & QSPI_SR_BUSY_MASK) + ; + + while (1) { + reg = qspi_read32(®s->rbsr); + if (reg & QSPI_RBSR_RDBFL_MASK) { + data = qspi_read32(®s->rbdr[0]); + data = qspi_endian_xchg(data); + memcpy(rxbuf, &data, len); + qspi_write32(®s->mcr, qspi_read32(®s->mcr) | + QSPI_MCR_CLR_RXF_MASK); + break; + } + } + + qspi_write32(®s->mcr, mcr_reg); +} +#endif + static void qspi_op_rdid(struct fsl_qspi *qspi, u32 *rxbuf, u32 len) { struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)qspi->reg_base; @@ -371,10 +470,10 @@ static void qspi_op_read(struct fsl_qspi *qspi, u32 *rxbuf, u32 len) qspi_write32(®s->mcr, mcr_reg); } -static void qspi_op_pp(struct fsl_qspi *qspi, u32 *txbuf, u32 len) +static void qspi_op_write(struct fsl_qspi *qspi, u8 *txbuf, u32 len) { struct fsl_qspi_regs *regs = (struct fsl_qspi_regs *)qspi->reg_base; - u32 mcr_reg, data, reg, status_reg; + u32 mcr_reg, data, reg, status_reg, seqid; int i, size, tx_size; u32 to_or_from = 0; @@ -404,22 +503,39 @@ static void qspi_op_pp(struct fsl_qspi *qspi, u32 *txbuf, u32 len) qspi_read32(®s->mcr) | QSPI_MCR_CLR_RXF_MASK); } + /* Default is page programming */ + seqid = SEQID_PP; +#ifdef CONFIG_SPI_FLASH_BAR + if (qspi->cur_seqid == QSPI_CMD_BRWR) + seqid = SEQID_BRWR; + else if (qspi->cur_seqid == QSPI_CMD_WREAR) + seqid = SEQID_WREAR; +#endif + to_or_from = qspi->sf_addr + qspi->amba_base; + qspi_write32(®s->sfar, to_or_from); tx_size = (len > TX_BUFFER_SIZE) ? TX_BUFFER_SIZE : len; - size = (tx_size + 3) / 4; - + size = tx_size / 4; for (i = 0; i < size; i++) { - data = qspi_endian_xchg(*txbuf); + memcpy(&data, txbuf, 4); + data = qspi_endian_xchg(data); qspi_write32(®s->tbdr, data); - txbuf++; + txbuf += 4; } - qspi_write32(®s->ipcr, - (SEQID_PP << QSPI_IPCR_SEQID_SHIFT) | tx_size); + size = tx_size % 4; + if (size) { + data = 0; + memcpy(&data, txbuf, size); + data = qspi_endian_xchg(data); + qspi_write32(®s->tbdr, data); + } + + qspi_write32(®s->ipcr, (seqid << QSPI_IPCR_SEQID_SHIFT) | tx_size); while (qspi_read32(®s->sr) & QSPI_SR_BUSY_MASK) ; @@ -495,16 +611,18 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, { struct fsl_qspi *qspi = to_qspi_spi(slave); u32 bytes = DIV_ROUND_UP(bitlen, 8); - static u32 pp_sfaddr; + static u32 wr_sfaddr; u32 txbuf; if (dout) { - memcpy(&txbuf, dout, 4); - qspi->cur_seqid = *(u8 *)dout; + if (flags & SPI_XFER_BEGIN) { + qspi->cur_seqid = *(u8 *)dout; + memcpy(&txbuf, dout, 4); + } if (flags == SPI_XFER_END) { - qspi->sf_addr = pp_sfaddr; - qspi_op_pp(qspi, (u32 *)dout, bytes); + qspi->sf_addr = wr_sfaddr; + qspi_op_write(qspi, (u8 *)dout, bytes); return 0; } @@ -514,9 +632,14 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, (qspi->cur_seqid == QSPI_CMD_BE_4K)) { qspi->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK; qspi_op_erase(qspi); - } else if (qspi->cur_seqid == QSPI_CMD_PP) { - pp_sfaddr = swab32(txbuf) & OFFSET_BITS_MASK; + } else if (qspi->cur_seqid == QSPI_CMD_PP) + wr_sfaddr = swab32(txbuf) & OFFSET_BITS_MASK; +#ifdef CONFIG_SPI_FLASH_BAR + else if ((qspi->cur_seqid == QSPI_CMD_BRWR) || + (qspi->cur_seqid == QSPI_CMD_WREAR)) { + wr_sfaddr = 0; } +#endif } if (din) { @@ -526,6 +649,13 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, qspi_op_rdid(qspi, din, bytes); else if (qspi->cur_seqid == QSPI_CMD_RDSR) qspi_op_rdsr(qspi, din); +#ifdef CONFIG_SPI_FLASH_BAR + else if ((qspi->cur_seqid == QSPI_CMD_BRRD) || + (qspi->cur_seqid == QSPI_CMD_RDEAR)) { + qspi->sf_addr = 0; + qspi_op_rdbank(qspi, din, bytes); + } +#endif } return 0; -- 2.30.2