From a20616863d32d91163043b6657a63c836bd9c5ba Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 26 Nov 2016 01:01:15 +0100 Subject: [PATCH] lantiq: use ath9k device tree bindings binding/owl-loader This moves the extraction of the eeprom/calibration data to a hotplug firmware script. Additionally it modifies all .dts to configure ath9k directly from within the .dts. The owl-loader approach enables support on devices with exotic eeprom data locations (such as unaligned positions on the flash or data inside an UBI volume). Signed-off-by: Martin Blumenstingl [add ath9k caldata mac address patcher] [fixes DGN3500 wifi mac] [fixes BTHOMEHUBV3A wifi mac] [set invalid mac for BTHOMEHUB2B, FRITZ3370, FRITZ7320 & FRITZ7360SL to restore previous random mac behavior] Signed-off-by: Mathias Kresin --- .../etc/hotplug.d/firmware/12-ath9k-eeprom | 140 ++++++++++++++++++ target/linux/lantiq/dts/ARV7518PW.dts | 31 ++-- target/linux/lantiq/dts/ARV8539PW22.dts | 26 ++-- target/linux/lantiq/dts/BTHOMEHUBV2B.dts | 23 ++- target/linux/lantiq/dts/BTHOMEHUBV3A.dts | 22 ++- target/linux/lantiq/dts/BTHOMEHUBV5A.dts | 27 ++-- target/linux/lantiq/dts/DGN3500.dtsi | 24 ++- target/linux/lantiq/dts/FRITZ3370.dts | 25 +++- target/linux/lantiq/dts/FRITZ7320.dts | 26 ++-- target/linux/lantiq/dts/FRITZ7360SL.dts | 24 ++- target/linux/lantiq/dts/TDW8980.dts | 4 - target/linux/lantiq/dts/TDW89X0.dtsi | 41 +++-- target/linux/lantiq/image/Makefile | 31 ++-- target/linux/lantiq/image/tp-link.mk | 2 +- 14 files changed, 305 insertions(+), 141 deletions(-) create mode 100644 target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom new file mode 100644 index 0000000000..8185bf1949 --- /dev/null +++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -0,0 +1,140 @@ +#!/bin/sh +# Based on ar71xx 10-ath9k-eeprom + +[ -e /lib/firmware/$FIRMWARE ] && exit 0 + +. /lib/functions.sh +. /lib/functions/system.sh +. /lib/functions/lantiq.sh +. /lib/upgrade/nand.sh + +# xor multiple hex values of the same length +xor() { + local val + local ret="0x$1" + local retlen=${#1} + + shift + while [ -n "$1" ]; do + val="0x$1" + ret=$((ret ^ val)) + shift + done + + printf "%0${retlen}x" "$ret" +} + +ath9k_eeprom_die() { + echo "ath9k eeprom: $*" + exit 1 +} + +ath9k_eeprom_extract_raw() { + local source=$1 + local offset=$2 + local size=4096 + + dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$size 2>/dev/null || \ + ath9k_eeprom_die "failed to extract from $mtd" +} + +ath9k_eeprom_extract() { + local part=$1 + local offset=$2 + local mtd + + mtd=$(find_mtd_chardev $part) + [ -n "$mtd" ] || \ + ath9k_eeprom_die "no mtd device found for partition $part" + + ath9k_eeprom_extract_raw $mtd $offset +} + +ath9k_ubi_eeprom_extract() { + local part=$1 + local offset=$2 + local ubidev=$(nand_find_ubi $CI_UBIPART) + local ubi + + ubi=$(nand_find_volume $ubidev $part) + [ -n "$ubi" ] || \ + ath9k_eeprom_die "no UBI volume found for $part" + + ath9k_eeprom_extract_raw /dev/$ubi $offset +} + +ath9k_patch_firmware_mac() { + local mac=$1 + local mac_offset=$2 + local swap=$3 + local chksum_offset=$4 + local xor_mac + local xor_fw_mac + local xor_fw_chksum + + [ -z "$mac" -o -z "$mac_offset" ] && return + + [ $swap -gt 0 ] && mac="${mac:3:2}:${mac:0:2}:${mac:9:2}:${mac:6:2}:${mac:15:2}:${mac:12:2}" + + [ -n "$chksum_offset" ] && { + xor_mac=${mac//:/} + xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}" + + xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE) + xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}" + + xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE) + xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac) + + printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \ + dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2 + } + + macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$mac_offset count=6 +} + +case "$FIRMWARE" in + "ath9k-eeprom-pci-0000:00:0e.0.bin" | \ + "ath9k-eeprom-pci-0000:01:00.0.bin" | \ + "ath9k-eeprom-pci-0000:02:00.0.bin") + board=$(lantiq_board_name) + + case "$board" in + ARV7518PW) + ath9k_eeprom_extract "boardconfig" 1024 + ;; + ARV8539PW22) + ath9k_eeprom_extract "art" 1024 + ;; + BTHOMEHUBV2B) + ath9k_eeprom_extract "art" 0 + ath9k_patch_firmware_mac "00:00:00:00:00:00" 524 1 514 + ;; + BTHOMEHUBV3A) + ath9k_eeprom_extract "art-copy" 0 + ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 268 1 258 + ;; + BTHOMEHUBV5A) + ath9k_eeprom_extract "caldata" 4096 + ;; + DGN3500*) + ath9k_eeprom_extract "calibration" 61440 + ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 524 0 514 + ;; + FRITZ3370) + ath9k_eeprom_extract "urlader" 2437 + ath9k_patch_firmware_mac "00:00:00:00:00:00" 2 0 + ;; + FRITZ7320|FRITZ7360SL) + ath9k_eeprom_extract "urlader" 2437 + ath9k_patch_firmware_mac "00:00:00:00:00:00" 268 0 258 + ;; + TDW8970|TDW8980) + ath9k_eeprom_extract "boardconfig" 135168 + ;; + *) + ath9k_eeprom_die "board $board is not supported yet" + ;; + esac + ;; +esac diff --git a/target/linux/lantiq/dts/ARV7518PW.dts b/target/linux/lantiq/dts/ARV7518PW.dts index 8a6b620eb7..3b5d38d719 100644 --- a/target/linux/lantiq/dts/ARV7518PW.dts +++ b/target/linux/lantiq/dts/ARV7518PW.dts @@ -79,15 +79,6 @@ gpio-controller; lantiq,shadow = <0x0>; }; - - ath9k_eep { - compatible = "ath9k,eeprom"; - ath,eep-flash = <&boardconfig 0x400>; - ath,mac-offset = <0x16>; - ath,mac-increment = <1>; - ath,pci-slot = <14>; - ath,eep-endian; - }; }; gpio: pinmux@E100B10 { @@ -139,13 +130,6 @@ status = "okay"; gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; }; - - pci@E105400 { - status = "okay"; - lantiq,external-clock; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0xf>; - }; }; /* @@ -230,3 +214,18 @@ }; }; }; + +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + lantiq,external-clock; + req-mask = <0xf>; + + wifi@168c,0029 { + compatible = "pci168c,0029"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + mtd-mac-address = <&boardconfig 0x16>; + mtd-mac-address-increment = <1>; + }; +}; diff --git a/target/linux/lantiq/dts/ARV8539PW22.dts b/target/linux/lantiq/dts/ARV8539PW22.dts index 7365cbe5cf..2b82a321e0 100644 --- a/target/linux/lantiq/dts/ARV8539PW22.dts +++ b/target/linux/lantiq/dts/ARV8539PW22.dts @@ -66,15 +66,6 @@ }; }; }; - - ath9k_eep { - compatible = "ath9k,eeprom"; - ath,eep-flash = <&art 0x400>; - ath,mac-offset = <0x16>; - ath,mac-increment = <1>; - ath,pci-slot = <14>; - ath,eep-endian; - }; }; gpio: pinmux@E100B10 { @@ -111,11 +102,6 @@ mtd-mac-address = <&art 0x16>; }; - pci@E105400 { - status = "okay"; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - }; - ifxhcd@E101000 { status = "okay"; gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; @@ -175,3 +161,15 @@ }; }; +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@168c,0029 { + compatible = "pci168c,0029"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + mtd-mac-address = <&art 0x16>; + mtd-mac-address-increment = <1>; + }; +}; diff --git a/target/linux/lantiq/dts/BTHOMEHUBV2B.dts b/target/linux/lantiq/dts/BTHOMEHUBV2B.dts index 28bda1a78d..948267d121 100644 --- a/target/linux/lantiq/dts/BTHOMEHUBV2B.dts +++ b/target/linux/lantiq/dts/BTHOMEHUBV2B.dts @@ -104,14 +104,6 @@ }; }; }; - - ath9k_eep { - compatible = "ath9k,eeprom"; - ath,eep-flash = <&ath9k_cal 0x0000>; - ath,mac-increment = <1>; - ath,pci-slot = <14>; - ath,eep-endian; - }; }; gpio: pinmux@E100B10 { @@ -177,11 +169,6 @@ gpios: stp@E100BB0 { status = "okay"; }; - - pci@E105400 { - status = "okay"; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - }; }; gpio-keys-polled { @@ -262,3 +249,13 @@ }; }; +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@168c,0027 { + compatible = "pci168c,0027"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + }; +}; diff --git a/target/linux/lantiq/dts/BTHOMEHUBV3A.dts b/target/linux/lantiq/dts/BTHOMEHUBV3A.dts index 55b47ecc02..600334feb5 100644 --- a/target/linux/lantiq/dts/BTHOMEHUBV3A.dts +++ b/target/linux/lantiq/dts/BTHOMEHUBV3A.dts @@ -75,13 +75,6 @@ }; }; }; - - ath9k_eep { - compatible = "ath9k,eeprom"; - ath,eep-flash = <&ath9k_cal 0x0000>; - ath,pci-slot = <14>; - ath,eep-endian; - }; }; gpio: pinmux@E100B10 { @@ -134,11 +127,6 @@ status = "okay"; gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; }; - - pci@E105400 { - status = "okay"; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - }; }; gpio-keys-polled { @@ -207,3 +195,13 @@ }; }; }; + +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + ath9k@7000 { + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + }; +}; diff --git a/target/linux/lantiq/dts/BTHOMEHUBV5A.dts b/target/linux/lantiq/dts/BTHOMEHUBV5A.dts index f99d32e071..2dea927095 100644 --- a/target/linux/lantiq/dts/BTHOMEHUBV5A.dts +++ b/target/linux/lantiq/dts/BTHOMEHUBV5A.dts @@ -111,11 +111,6 @@ status = "okay"; gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; }; - - pci@E105400 { - status = "okay"; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - }; }; gphy-xrx200 { @@ -125,14 +120,6 @@ phys = [ 00 01 ]; }; - ath9k_eep { - compatible = "ath9k,eeprom"; - ath,eep-flash = <&caldata 0x1000>; - ath,mac-offset = <0x110c>; - ath,mac-increment = <2>; - ath,pci-slot = <0xe>; /* 14 */ - }; - gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; @@ -211,6 +198,20 @@ }; }; +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@168c,002d { + compatible = "pci168c,002d"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + qca,disable-5ghz; + mtd-mac-address = <&caldata 0x110c>; + mtd-mac-address-increment = <2>; + }; +}; + ð0 { lan: interface@0 { compatible = "lantiq,xrx200-pdi"; diff --git a/target/linux/lantiq/dts/DGN3500.dtsi b/target/linux/lantiq/dts/DGN3500.dtsi index 1d0d71cdae..5528d5994b 100644 --- a/target/linux/lantiq/dts/DGN3500.dtsi +++ b/target/linux/lantiq/dts/DGN3500.dtsi @@ -69,19 +69,6 @@ ifxhcd@E101000 { status = "okay"; }; - - pci@E105400 { - status = "okay"; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - }; - }; - - ath9k_eep { - compatible = "ath9k,eeprom"; - ath,eep-flash = <&ath9k_cal 0xf000>; - ath,pci-slot = <14>; - ath,eep-endian; - ath,eep-swap; }; rtl8366rb { @@ -153,6 +140,17 @@ }; }; +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@168c,0029 { + compatible = "pci168c,0029"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + }; +}; + &spi { pinctrl-names = "default"; pinctrl-0 = <&pins_spi_default>; diff --git a/target/linux/lantiq/dts/FRITZ3370.dts b/target/linux/lantiq/dts/FRITZ3370.dts index 2580674ba9..1e2e90ca1b 100644 --- a/target/linux/lantiq/dts/FRITZ3370.dts +++ b/target/linux/lantiq/dts/FRITZ3370.dts @@ -118,13 +118,6 @@ }; }; - ath9k_eep { - compatible = "ath9k,eeprom"; - ath,eep-flash = <&ath9k_cal 0x985>; - ath,eep-endian; - ath,eep-swap; - }; - gphy-xrx200 { compatible = "lantiq,phy-xrx200"; firmware = "lantiq/vr9_phy11g_a1x.bin"; @@ -196,7 +189,7 @@ reg = <4 0>; spi-max-frequency = <1000000>; - ath9k_cal: partition@0 { + partition@0 { reg = <0x0 0x20000>; label = "urlader"; read-only; @@ -275,3 +268,19 @@ }; }; }; + +&pcie0 { + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + + wifi@0,0 { + compatible = "pci0,0"; + reg = <0 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */ + }; + }; +}; diff --git a/target/linux/lantiq/dts/FRITZ7320.dts b/target/linux/lantiq/dts/FRITZ7320.dts index 4cc4915312..4eb5fc4fe3 100644 --- a/target/linux/lantiq/dts/FRITZ7320.dts +++ b/target/linux/lantiq/dts/FRITZ7320.dts @@ -65,14 +65,6 @@ }; }; - ath9k_eep { - compatible = "ath9k,eeprom"; - ath,eep-flash = <&ath9k_cal 0x985>; - ath,device-id = /bits/ 16 <0xff1d 0x2d>; - ath,eep-endian; - ath,eep-swap; - }; - gpio: pinmux@E100B10 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -103,12 +95,6 @@ ifxhcd@E101000 { status = "okay"; }; - - pci@E105400 { - status = "okay"; - req-mask = <0xf>; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - }; }; gpio-keys-polled { @@ -158,3 +144,15 @@ }; }; }; + +&pci0 { + status = "okay"; + req-mask = <0xf>; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@0,0 { + compatible = "pci0,0"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + }; +}; diff --git a/target/linux/lantiq/dts/FRITZ7360SL.dts b/target/linux/lantiq/dts/FRITZ7360SL.dts index 2a90a7f8c2..e54b0e27ab 100644 --- a/target/linux/lantiq/dts/FRITZ7360SL.dts +++ b/target/linux/lantiq/dts/FRITZ7360SL.dts @@ -96,14 +96,6 @@ }; }; - ath9k_eep { - compatible = "ath9k,eeprom"; - ath,eep-flash = <&urlader 0x985>; - ath,eep-endian; - ath,eep-swap; - ath,pci-slot = <0>; - }; - gphy-xrx200 { compatible = "lantiq,phy-xrx200"; firmware = "lantiq/vr9_phy11g_a2x.bin"; @@ -217,3 +209,19 @@ }; }; }; + +&pcie0 { + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + + wifi@168c,002e { + compatible = "pci168c,002e"; + reg = <0 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */ + }; + }; +}; diff --git a/target/linux/lantiq/dts/TDW8980.dts b/target/linux/lantiq/dts/TDW8980.dts index 95eec58508..0796b2b234 100644 --- a/target/linux/lantiq/dts/TDW8980.dts +++ b/target/linux/lantiq/dts/TDW8980.dts @@ -25,10 +25,6 @@ }; }; - ath9k_eep { - ath,pci-slot = <0>; - }; - gpio-leds { wifi2 { label = "tdw8980:green:wlan5ghz"; diff --git a/target/linux/lantiq/dts/TDW89X0.dtsi b/target/linux/lantiq/dts/TDW89X0.dtsi index 6447451d18..153d96eff8 100644 --- a/target/linux/lantiq/dts/TDW89X0.dtsi +++ b/target/linux/lantiq/dts/TDW89X0.dtsi @@ -14,6 +14,7 @@ led-dsl = &dsl; led-internet = &internet; + led-wifi = &wifi; led-usb = &usb0; led-usb2 = &usb2; }; @@ -83,16 +84,6 @@ phys = [ 00 01 ]; }; - ath9k_eep { - compatible = "ath9k,eeprom"; - ath,eep-flash = <&ath9k_cal 0x21000>; - ath,mac-offset = <0xf100>; - ath,mac-increment = <2>; - ath,led-pin = <0>; - ath,disable-5ghz; - ath,led-active-high; - }; - gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; @@ -144,6 +135,15 @@ gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; }; }; + + wifi-leds { + compatible = "gpio-leds"; + + wifi: wifi { + label = "tdw89x0:green:wifi"; + gpios = <&ath9k 0 GPIO_ACTIVE_HIGH>; + }; + }; }; &spi { @@ -249,3 +249,24 @@ }; }; }; + +&pcie0 { + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + + ath9k: wifi@168c,002e { + compatible = "pci168c,002e"; + reg = <0 0 0 0 0>; + #gpio-cells = <2>; + gpio-controller; + qca,no-eeprom; + qca,disable-5ghz; + mtd-mac-address = <&ath9k_cal 0xf100>; + mtd-mac-address-increment = <2>; + }; + }; +}; diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile index 490bd543e0..fe0221ff51 100644 --- a/target/linux/lantiq/image/Makefile +++ b/target/linux/lantiq/image/Makefile @@ -176,7 +176,7 @@ define Device/BTHOMEHUBV2B kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \ kmod-ltq-deu-danube \ ltq-adsl-app ppp-mod-pppoa \ - kmod-ath9k wpad-mini + kmod-ath9k kmod-owl-loader wpad-mini endef TARGET_DEVICES += BTHOMEHUBV2B @@ -258,7 +258,7 @@ define Device/ARV7518PW kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \ ltq-adsl-app ppp-mod-pppoa \ - kmod-ath9k wpad-mini + kmod-ath9k kmod-owl-loader wpad-mini endef TARGET_DEVICES += ARV7518PW @@ -304,7 +304,7 @@ define Device/ARV8539PW22 kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \ ltq-adsl-app ppp-mod-pppoa \ - kmod-ath9k wpad-mini + kmod-ath9k kmod-owl-loader wpad-mini endef TARGET_DEVICES += ARV8539PW22 @@ -330,7 +330,8 @@ define Device/BTHOMEHUBV3A kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \ kmod-ltq-deu-ar9 \ ltq-adsl-app ppp-mod-pppoa \ - kmod-ath9k wpad-mini uboot-envtools + kmod-ath9k kmod-owl-loader wpad-mini \ + uboot-envtools endef TARGET_DEVICES += BTHOMEHUBV3A @@ -357,7 +358,7 @@ define Device/DGN3500 check-size 16320k | pad-to 16384k DEVICE_TITLE := Netgear DGN3500 DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \ - kmod-ath9k wpad-mini \ + kmod-ath9k kmod-owl-loader wpad-mini \ kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \ kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \ ltq-adsl-app ppp-mod-pppoa \ @@ -377,7 +378,7 @@ define Device/DGN3500B check-size 16320k | pad-to 16384k DEVICE_TITLE := Netgear DGN3500B DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \ - kmod-ath9k wpad-mini \ + kmod-ath9k kmod-owl-loader wpad-mini \ kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \ kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \ ltq-adsl-app ppp-mod-pppoa \ @@ -393,7 +394,7 @@ define Device/WBMRA kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \ kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \ ltq-adsl-app ppp-mod-pppoa \ - kmod-ath9k wpad-mini + kmod-ath9k kmod-owl-loader wpad-mini endef TARGET_DEVICES += WBMRA @@ -405,7 +406,7 @@ define Device/WBMRB kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \ kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \ ltq-adsl-app ppp-mod-pppoa \ - kmod-ath9k wpad-mini + kmod-ath9k kmod-owl-loader wpad-mini endef TARGET_DEVICES += WBMRB @@ -413,12 +414,11 @@ define Device/FRITZ7320 $(Device/AVM) IMAGE_SIZE := 15744k DEVICE_TITLE := 1&1 HomeServer - FRITZ7320 - DEVICE_PACKAGES := kmod-ath9k wpad-mini \ + DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini \ kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \ kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \ ltq-adsl-app ppp-mod-pppoa \ - kmod-ltq-deu-ar9 kmod-usb-dwc2 \ - kmod-ath9k wpad-mini -swconfig + kmod-ltq-deu-ar9 kmod-usb-dwc2 -swconfig endef TARGET_DEVICES += FRITZ7320 @@ -477,7 +477,8 @@ TARGET_DEVICES += ARV7519RW22 define Device/BTHOMEHUBV5A $(Device/NAND) DEVICE_TITLE := BT Home Hub 5A - DEVICE_PACKAGES := kmod-ath9k kmod-ath10k ath10k-firmware-qca988x wpad-mini kmod-usb-dwc2 + DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader \ + kmod-ath10k ath10k-firmware-qca988x wpad-mini kmod-usb-dwc2 endef TARGET_DEVICES += BTHOMEHUBV5A @@ -485,14 +486,14 @@ define Device/EASY80920NAND $(Device/lantiqFullImage) IMAGE_SIZE := 64512k DEVICE_TITLE := Lantiq VR9 - EASY80920NAND - DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport + DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport endef TARGET_DEVICES += EASY80920NAND define Device/EASY80920NOR IMAGE_SIZE := 7936k DEVICE_TITLE := Lantiq VR9 - EASY80920NOR - DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport + DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport endef TARGET_DEVICES += EASY80920NOR @@ -508,7 +509,7 @@ define Device/FRITZ7360SL $(Device/AVM) IMAGE_SIZE := 15744k DEVICE_TITLE := 1&1 HomeServer - FRITZ7360SL - DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-usb-dwc2 + DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2 endef TARGET_DEVICES += FRITZ7360SL diff --git a/target/linux/lantiq/image/tp-link.mk b/target/linux/lantiq/image/tp-link.mk index 97d9e836f4..49c4bc10e1 100644 --- a/target/linux/lantiq/image/tp-link.mk +++ b/target/linux/lantiq/image/tp-link.mk @@ -33,7 +33,7 @@ define Device/TDW8980 BOARD_ID := TD-W8980v1 IMAGE_SIZE := 7680k DEVICE_TITLE := TP-LINK TD-W8980 - DEVICE_PACKAGES:= kmod-ath9k wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport + DEVICE_PACKAGES:= kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport endef define Device/VR200v -- 2.30.2