From a1c49c434e15050b5dafe3b6f5cc732d4f02d657 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Sun, 2 Jun 2019 08:02:48 +0800 Subject: [PATCH] Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices This adds the support of enabling MT7668U Bluetooth function running on the top of btusb driver. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0e8d ProdID=7668 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=160mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Sean Wang Signed-off-by: Marcel Holtmann --- drivers/bluetooth/Kconfig | 11 + drivers/bluetooth/btusb.c | 576 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 587 insertions(+) diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index a3fafd781aa1..aae665a3a254 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -52,6 +52,17 @@ config BT_HCIBTUSB_BCM Say Y here to compile support for Broadcom protocol. +config BT_HCIBTUSB_MTK + bool "MediaTek protocol support" + depends on BT_HCIBTUSB + default n + help + The MediaTek protocol support enables firmware download + support and chip initialization for MediaTek Bluetooth + USB controllers. + + Say Y here to compile support for MediaTek protocol. + config BT_HCIBTUSB_RTL bool "Realtek protocol support" depends on BT_HCIBTUSB diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index c550a8e7c336..0c58fd1a5b0f 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -55,6 +56,7 @@ static struct usb_driver btusb_driver; #define BTUSB_BCM2045 0x40000 #define BTUSB_IFNUM_2 0x80000 #define BTUSB_CW6622 0x100000 +#define BTUSB_MEDIATEK 0x200000 static const struct usb_device_id btusb_table[] = { /* Generic Bluetooth USB device */ @@ -348,6 +350,10 @@ static const struct usb_device_id blacklist_table[] = { { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01), .driver_info = BTUSB_REALTEK }, + /* MediaTek Bluetooth devices */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0e8d, 0xe0, 0x01, 0x01), + .driver_info = BTUSB_MEDIATEK }, + /* Additional Realtek 8723AE Bluetooth devices */ { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK }, { USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK }, @@ -428,6 +434,7 @@ static const struct dmi_system_id btusb_needs_reset_resume_table[] = { #define BTUSB_DIAG_RUNNING 10 #define BTUSB_OOB_WAKE_ENABLED 11 #define BTUSB_HW_RESET_ACTIVE 12 +#define BTUSB_TX_WAIT_VND_EVT 13 struct btusb_data { struct hci_dev *hdev; @@ -451,6 +458,7 @@ struct btusb_data { struct usb_anchor bulk_anchor; struct usb_anchor isoc_anchor; struct usb_anchor diag_anchor; + struct usb_anchor ctrl_anchor; spinlock_t rxlock; struct sk_buff *evt_skb; @@ -1204,6 +1212,7 @@ static void btusb_stop_traffic(struct btusb_data *data) usb_kill_anchored_urbs(&data->bulk_anchor); usb_kill_anchored_urbs(&data->isoc_anchor); usb_kill_anchored_urbs(&data->diag_anchor); + usb_kill_anchored_urbs(&data->ctrl_anchor); } static int btusb_close(struct hci_dev *hdev) @@ -2439,6 +2448,563 @@ static int btusb_shutdown_intel_new(struct hci_dev *hdev) return 0; } +#ifdef CONFIG_BT_HCIBTUSB_MTK + +#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin" + +#define HCI_WMT_MAX_EVENT_SIZE 64 + +enum { + BTMTK_WMT_PATCH_DWNLD = 0x1, + BTMTK_WMT_FUNC_CTRL = 0x6, + BTMTK_WMT_RST = 0x7, + BTMTK_WMT_SEMAPHORE = 0x17, +}; + +enum { + BTMTK_WMT_INVALID, + BTMTK_WMT_PATCH_UNDONE, + BTMTK_WMT_PATCH_DONE, + BTMTK_WMT_ON_UNDONE, + BTMTK_WMT_ON_DONE, + BTMTK_WMT_ON_PROGRESS, +}; + +struct btmtk_wmt_hdr { + u8 dir; + u8 op; + __le16 dlen; + u8 flag; +} __packed; + +struct btmtk_hci_wmt_cmd { + struct btmtk_wmt_hdr hdr; + u8 data[256]; +} __packed; + +struct btmtk_hci_wmt_evt { + struct hci_event_hdr hhdr; + struct btmtk_wmt_hdr whdr; +} __packed; + +struct btmtk_hci_wmt_evt_funcc { + struct btmtk_hci_wmt_evt hwhdr; + __be16 status; +} __packed; + +struct btmtk_tci_sleep { + u8 mode; + __le16 duration; + __le16 host_duration; + u8 host_wakeup_pin; + u8 time_compensation; +} __packed; + +struct btmtk_hci_wmt_params { + u8 op; + u8 flag; + u16 dlen; + const void *data; + u32 *status; +}; + +static void btusb_mtk_wmt_recv(struct urb *urb) +{ + struct hci_dev *hdev = urb->context; + struct btusb_data *data = hci_get_drvdata(hdev); + struct hci_event_hdr *hdr; + struct sk_buff *skb; + int err; + + if (urb->status == 0 && urb->actual_length > 0) { + hdev->stat.byte_rx += urb->actual_length; + + /* WMT event shouldn't be fragmented and the size should be + * less than HCI_WMT_MAX_EVENT_SIZE. + */ + skb = bt_skb_alloc(HCI_WMT_MAX_EVENT_SIZE, GFP_ATOMIC); + if (!skb) { + hdev->stat.err_rx++; + goto err_out; + } + + hci_skb_pkt_type(skb) = HCI_EVENT_PKT; + skb_put_data(skb, urb->transfer_buffer, urb->actual_length); + + hdr = (void *)skb->data; + /* Fix up the vendor event id with 0xff for vendor specific + * instead of 0xe4 so that event send via monitoring socket can + * be parsed properly. + */ + hdr->evt = 0xff; + + /* When someone waits for the WMT event, the skb is being cloned + * and being processed the events from there then. + */ + if (test_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags)) { + data->evt_skb = skb_clone(skb, GFP_KERNEL); + if (!data->evt_skb) + goto err_out; + } + + err = hci_recv_frame(hdev, skb); + if (err < 0) + goto err_free_skb; + + if (test_and_clear_bit(BTUSB_TX_WAIT_VND_EVT, + &data->flags)) { + /* Barrier to sync with other CPUs */ + smp_mb__after_atomic(); + wake_up_bit(&data->flags, + BTUSB_TX_WAIT_VND_EVT); + } +err_out: + return; +err_free_skb: + kfree_skb(data->evt_skb); + data->evt_skb = NULL; + return; + } else if (urb->status == -ENOENT) { + /* Avoid suspend failed when usb_kill_urb */ + return; + } + + usb_mark_last_busy(data->udev); + + /* The URB complete handler is still called with urb->actual_length = 0 + * when the event is not available, so we should keep re-submitting + * URB until WMT event returns, Also, It's necessary to wait some time + * between the two consecutive control URBs to relax the target device + * to generate the event. Otherwise, the WMT event cannot return from + * the device successfully. + */ + udelay(100); + + usb_anchor_urb(urb, &data->ctrl_anchor); + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) { + /* -EPERM: urb is being killed; + * -ENODEV: device got disconnected + */ + if (err != -EPERM && err != -ENODEV) + bt_dev_err(hdev, "urb %p failed to resubmit (%d)", + urb, -err); + usb_unanchor_urb(urb); + } +} + +static int btusb_mtk_submit_wmt_recv_urb(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct usb_ctrlrequest *dr; + unsigned char *buf; + int err, size = 64; + unsigned int pipe; + struct urb *urb; + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + return -ENOMEM; + + dr = kmalloc(sizeof(*dr), GFP_KERNEL); + if (!dr) { + usb_free_urb(urb); + return -ENOMEM; + } + + dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_IN; + dr->bRequest = 1; + dr->wIndex = cpu_to_le16(0); + dr->wValue = cpu_to_le16(48); + dr->wLength = cpu_to_le16(size); + + buf = kmalloc(size, GFP_KERNEL); + if (!buf) { + kfree(dr); + return -ENOMEM; + } + + pipe = usb_rcvctrlpipe(data->udev, 0); + + usb_fill_control_urb(urb, data->udev, pipe, (void *)dr, + buf, size, btusb_mtk_wmt_recv, hdev); + + urb->transfer_flags |= URB_FREE_BUFFER; + + usb_anchor_urb(urb, &data->ctrl_anchor); + err = usb_submit_urb(urb, GFP_KERNEL); + if (err < 0) { + if (err != -EPERM && err != -ENODEV) + bt_dev_err(hdev, "urb %p submission failed (%d)", + urb, -err); + usb_unanchor_urb(urb); + } + + usb_free_urb(urb); + + return err; +} + +static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev, + struct btmtk_hci_wmt_params *wmt_params) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc; + u32 hlen, status = BTMTK_WMT_INVALID; + struct btmtk_hci_wmt_evt *wmt_evt; + struct btmtk_hci_wmt_cmd wc; + struct btmtk_wmt_hdr *hdr; + int err; + + /* Submit control IN URB on demand to process the WMT event */ + err = btusb_mtk_submit_wmt_recv_urb(hdev); + if (err < 0) + return err; + + /* Send the WMT command and wait until the WMT event returns */ + hlen = sizeof(*hdr) + wmt_params->dlen; + if (hlen > 255) + return -EINVAL; + + hdr = (struct btmtk_wmt_hdr *)&wc; + hdr->dir = 1; + hdr->op = wmt_params->op; + hdr->dlen = cpu_to_le16(wmt_params->dlen + 1); + hdr->flag = wmt_params->flag; + memcpy(wc.data, wmt_params->data, wmt_params->dlen); + + set_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags); + + err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc); + + if (err < 0) { + clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags); + return err; + } + + /* The vendor specific WMT commands are all answered by a vendor + * specific event and will have the Command Status or Command + * Complete as with usual HCI command flow control. + * + * After sending the command, wait for BTUSB_TX_WAIT_VND_EVT + * state to be cleared. The driver specific event receive routine + * will clear that state and with that indicate completion of the + * WMT command. + */ + err = wait_on_bit_timeout(&data->flags, BTUSB_TX_WAIT_VND_EVT, + TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT); + if (err == -EINTR) { + bt_dev_err(hdev, "Execution of wmt command interrupted"); + clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags); + return err; + } + + if (err) { + bt_dev_err(hdev, "Execution of wmt command timed out"); + clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags); + return -ETIMEDOUT; + } + + /* Parse and handle the return WMT event */ + wmt_evt = (struct btmtk_hci_wmt_evt *)data->evt_skb->data; + if (wmt_evt->whdr.op != hdr->op) { + bt_dev_err(hdev, "Wrong op received %d expected %d", + wmt_evt->whdr.op, hdr->op); + err = -EIO; + goto err_free_skb; + } + + switch (wmt_evt->whdr.op) { + case BTMTK_WMT_SEMAPHORE: + if (wmt_evt->whdr.flag == 2) + status = BTMTK_WMT_PATCH_UNDONE; + else + status = BTMTK_WMT_PATCH_DONE; + break; + case BTMTK_WMT_FUNC_CTRL: + wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt; + if (be16_to_cpu(wmt_evt_funcc->status) == 0x404) + status = BTMTK_WMT_ON_DONE; + else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420) + status = BTMTK_WMT_ON_PROGRESS; + else + status = BTMTK_WMT_ON_UNDONE; + break; + } + + if (wmt_params->status) + *wmt_params->status = status; + +err_free_skb: + kfree_skb(data->evt_skb); + data->evt_skb = NULL; + + return err; +} + +static int btusb_mtk_setup_firmware(struct hci_dev *hdev, const char *fwname) +{ + struct btmtk_hci_wmt_params wmt_params; + const struct firmware *fw; + const u8 *fw_ptr; + size_t fw_size; + int err, dlen; + u8 flag; + + err = request_firmware(&fw, fwname, &hdev->dev); + if (err < 0) { + bt_dev_err(hdev, "Failed to load firmware file (%d)", err); + return err; + } + + fw_ptr = fw->data; + fw_size = fw->size; + + /* The size of patch header is 30 bytes, should be skip */ + if (fw_size < 30) + goto err_release_fw; + + fw_size -= 30; + fw_ptr += 30; + flag = 1; + + wmt_params.op = BTMTK_WMT_PATCH_DWNLD; + wmt_params.status = NULL; + + while (fw_size > 0) { + dlen = min_t(int, 250, fw_size); + + /* Tell deivice the position in sequence */ + if (fw_size - dlen <= 0) + flag = 3; + else if (fw_size < fw->size - 30) + flag = 2; + + wmt_params.flag = flag; + wmt_params.dlen = dlen; + wmt_params.data = fw_ptr; + + err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params); + if (err < 0) { + bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)", + err); + goto err_release_fw; + } + + fw_size -= dlen; + fw_ptr += dlen; + } + + wmt_params.op = BTMTK_WMT_RST; + wmt_params.flag = 4; + wmt_params.dlen = 0; + wmt_params.data = NULL; + wmt_params.status = NULL; + + /* Activate funciton the firmware providing to */ + err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params); + if (err < 0) { + bt_dev_err(hdev, "Failed to send wmt rst (%d)", err); + return err; + } + + /* Wait a few moments for firmware activation done */ + usleep_range(10000, 12000); + +err_release_fw: + release_firmware(fw); + + return err; +} + +static int btusb_mtk_func_query(struct hci_dev *hdev) +{ + struct btmtk_hci_wmt_params wmt_params; + int status, err; + u8 param = 0; + + /* Query whether the function is enabled */ + wmt_params.op = BTMTK_WMT_FUNC_CTRL; + wmt_params.flag = 4; + wmt_params.dlen = sizeof(param); + wmt_params.data = ¶m; + wmt_params.status = &status; + + err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params); + if (err < 0) { + bt_dev_err(hdev, "Failed to query function status (%d)", err); + return err; + } + + return status; +} + +static int btusb_mtk_reg_read(struct btusb_data *data, u32 reg, u32 *val) +{ + int pipe, err, size = sizeof(u32); + void *buf; + + buf = kzalloc(size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + pipe = usb_rcvctrlpipe(data->udev, 0); + err = usb_control_msg(data->udev, pipe, 0x63, + USB_TYPE_VENDOR | USB_DIR_IN, + reg >> 16, reg & 0xffff, + buf, size, USB_CTRL_SET_TIMEOUT); + if (err < 0) + goto err_free_buf; + + *val = get_unaligned_le32(buf); + +err_free_buf: + kfree(buf); + + return err; +} + +static int btusb_mtk_id_get(struct btusb_data *data, u32 *id) +{ + return btusb_mtk_reg_read(data, 0x80000008, id); +} + +static int btusb_mtk_setup(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct btmtk_hci_wmt_params wmt_params; + ktime_t calltime, delta, rettime; + struct btmtk_tci_sleep tci_sleep; + unsigned long long duration; + struct sk_buff *skb; + const char *fwname; + int err, status; + u32 dev_id; + u8 param; + + calltime = ktime_get(); + + err = btusb_mtk_id_get(data, &dev_id); + if (err < 0) { + bt_dev_err(hdev, "Failed to get device id (%d)", err); + return err; + } + + switch (dev_id) { + case 0x7668: + fwname = FIRMWARE_MT7668; + break; + default: + bt_dev_err(hdev, "Unsupported support hardware variant (%08x)", + dev_id); + return -ENODEV; + } + + /* Query whether the firmware is already download */ + wmt_params.op = BTMTK_WMT_SEMAPHORE; + wmt_params.flag = 1; + wmt_params.dlen = 0; + wmt_params.data = NULL; + wmt_params.status = &status; + + err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params); + if (err < 0) { + bt_dev_err(hdev, "Failed to query firmware status (%d)", err); + return err; + } + + if (status == BTMTK_WMT_PATCH_DONE) { + bt_dev_info(hdev, "firmware already downloaded"); + goto ignore_setup_fw; + } + + /* Setup a firmware which the device definitely requires */ + err = btusb_mtk_setup_firmware(hdev, fwname); + if (err < 0) + return err; + +ignore_setup_fw: + err = readx_poll_timeout(btusb_mtk_func_query, hdev, status, + status < 0 || status != BTMTK_WMT_ON_PROGRESS, + 2000, 5000000); + /* -ETIMEDOUT happens */ + if (err < 0) + return err; + + /* The other errors happen in btusb_mtk_func_query */ + if (status < 0) + return status; + + if (status == BTMTK_WMT_ON_DONE) { + bt_dev_info(hdev, "function already on"); + goto ignore_func_on; + } + + /* Enable Bluetooth protocol */ + param = 1; + wmt_params.op = BTMTK_WMT_FUNC_CTRL; + wmt_params.flag = 0; + wmt_params.dlen = sizeof(param); + wmt_params.data = ¶m; + wmt_params.status = NULL; + + err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params); + if (err < 0) { + bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); + return err; + } + +ignore_func_on: + /* Apply the low power environment setup */ + tci_sleep.mode = 0x5; + tci_sleep.duration = cpu_to_le16(0x640); + tci_sleep.host_duration = cpu_to_le16(0x640); + tci_sleep.host_wakeup_pin = 0; + tci_sleep.time_compensation = 0; + + skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + bt_dev_err(hdev, "Failed to apply low power setting (%d)", err); + return err; + } + kfree_skb(skb); + + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long)ktime_to_ns(delta) >> 10; + + bt_dev_info(hdev, "Device setup in %llu usecs", duration); + + return 0; +} + +static int btusb_mtk_shutdown(struct hci_dev *hdev) +{ + struct btmtk_hci_wmt_params wmt_params; + u8 param = 0; + int err; + + /* Disable the device */ + wmt_params.op = BTMTK_WMT_FUNC_CTRL; + wmt_params.flag = 0; + wmt_params.dlen = sizeof(param); + wmt_params.data = ¶m; + wmt_params.status = NULL; + + err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params); + if (err < 0) { + bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); + return err; + } + + return 0; +} + +MODULE_FIRMWARE(FIRMWARE_MT7668); +#endif + #ifdef CONFIG_PM /* Configure an out-of-band gpio as wake-up pin, if specified in device tree */ static int marvell_config_oob_wake(struct hci_dev *hdev) @@ -3046,6 +3612,7 @@ static int btusb_probe(struct usb_interface *intf, init_usb_anchor(&data->bulk_anchor); init_usb_anchor(&data->isoc_anchor); init_usb_anchor(&data->diag_anchor); + init_usb_anchor(&data->ctrl_anchor); spin_lock_init(&data->rxlock); if (id->driver_info & BTUSB_INTEL_NEW) { @@ -3159,6 +3726,15 @@ static int btusb_probe(struct usb_interface *intf, if (id->driver_info & BTUSB_MARVELL) hdev->set_bdaddr = btusb_set_bdaddr_marvell; +#ifdef CONFIG_BT_HCIBTUSB_MTK + if (id->driver_info & BTUSB_MEDIATEK) { + hdev->setup = btusb_mtk_setup; + hdev->shutdown = btusb_mtk_shutdown; + hdev->manufacturer = 70; + set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks); + } +#endif + if (id->driver_info & BTUSB_SWAVE) { set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks); set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks); -- 2.30.2