From a1a8cd82829daa02390c7fb8d9c1076073a6ac33 Mon Sep 17 00:00:00 2001 From: Alan Luck Date: Wed, 10 Jul 2024 21:57:11 +1000 Subject: [PATCH] ramips: Add support for D-Link DIR-2150-R1 Hardware Specification: SoC: Mediatek MT7621DAT (MIPS1004Kc 880 MHz, dual core) RAM: 128 MB Storage: 128 MB NAND flash Ethernet: 5x 10/100/1000 Mbps LAN1,LAN2,LAN3,LAN4 & WAN Wireless: 2.4GHz: Mediatek MT7603EN up to 300Mbps (802.11b/g/n MIMO 2x2) Wireless: 5GHz: Mediatek MT7615N up to 1733Mbps (802.11n/ac MU-MIMO 4x4) LEDs: Power (white & amber), Internet (white & amber) LEDs: 2.4G (White), 5Ghz (White) Buttons: WPS, Reset USB: Front V3.0 & Rear V2.0 MAC Table Label xx:xx:xx:xx:xx:38 LAN xx:xx:xx:xx:xx:39 2.4Ghz xx:xx:xx:xx:xx:3A 5Ghz xx:xx:xx:xx:xx:3C WAN xx:xx:xx:xx:xx:38 Flash Instructions: D-Link normal OEM firmware update page 1. upload OpenWRT factory.bin like any D-Link upgrade image D-Link Fail Safe GUI: 1. Push and hold reset button (on the bottom of the device) until power led starts flashing (about 10 secs or so) while plugging in the power cable. 2. Give it ~30 seconds, to boot the fail safe GUI 3. Connect your client computer to LAN1 of the device 4. Set your client IP address manually to 192.168.0.2 / 255.255.255.0 5. Call the fail safe page for the device at http://192.168.0.1/ 6. Use the provided fail safe web GUI to upload the factory.bin to the device Signed-off-by: Alan Luck Link: https://github.com/openwrt/openwrt/pull/16269 Signed-off-by: Hauke Mehrtens --- .../ramips/dts/mt7621_dlink_dir-2150-r1.dts | 199 ++++++++++++++++++ target/linux/ramips/image/mt7621.mk | 14 ++ .../mt7621/base-files/etc/board.d/01_leds | 1 + .../mt7621/base-files/lib/upgrade/platform.sh | 1 + 4 files changed, 215 insertions(+) create mode 100644 target/linux/ramips/dts/mt7621_dlink_dir-2150-r1.dts diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-2150-r1.dts b/target/linux/ramips/dts/mt7621_dlink_dir-2150-r1.dts new file mode 100644 index 0000000000..8a1bae328f --- /dev/null +++ b/target/linux/ramips/dts/mt7621_dlink_dir-2150-r1.dts @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include +#include + +/ { + compatible = "dlink,dir-2150-r1", "mediatek,mt7621-soc"; + model = "D-Link DIR-2150 R1"; + + aliases { + label-mac-device = &gmac1; + led-boot = &led_power_orange; + led-failsafe = &led_power_white; + led-running = &led_power_white; + led-upgrade = &led_net_orange; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power_orange: led-0 { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + + led_power_white: led-1 { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + led_net_orange: led-2 { + function = LED_FUNCTION_WAN; + color = ; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + led-3 { + function = LED_FUNCTION_WAN; + color = ; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Bootloader"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "config"; + reg = <0x80000 0x80000>; + read-only; + }; + + partition@100000 { + label = "factory"; + reg = <0x100000 0x40000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x400>; + }; + + eeprom_factory_8000: eeprom@8000 { + reg = <0x8000 0x4da8>; + }; + + macaddr_factory_e006: macaddr@e006 { + compatible = "mac-base"; + reg = <0xe006 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@140000 { + label = "firmware"; + compatible = "denx,uimage"; + reg = <0x140000 0x7E80000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_e006 2>; + nvmem-cell-names = "eeprom", "mac-address"; + ieee80211-freq-limit = <2400000 2500000>; + + led { + led-active-low; + }; + }; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_e006 4>; + nvmem-cell-names = "eeprom", "mac-address"; + ieee80211-freq-limit = <5000000 6000000>; + + led { + led-active-low; + }; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_e006 1>; + nvmem-cell-names = "mac-address"; +}; + +&gmac1 { + status = "okay"; + label = "wan"; + phy-handle = <ðphy4>; + + nvmem-cells = <&macaddr_factory_e006 0>; + nvmem-cell-names = "mac-address"; +}; + +ðphy4 { + /delete-property/ interrupts; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan4"; + }; + + port@1 { + status = "okay"; + label = "lan3"; + }; + + port@2 { + status = "okay"; + label = "lan2"; + }; + + port@3 { + status = "okay"; + label = "lan1"; + }; + }; +}; + +&state_default { + gpio { + groups = "i2c", "uart3", "jtag", "wdt"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 246276c7db..2932f13e99 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -916,6 +916,20 @@ define Device/dlink_dir-2150-a1 endef TARGET_DEVICES += dlink_dir-2150-a1 +define Device/dlink_dir-2150-r1 + $(Device/nand) + IMAGE_SIZE := 129536k + DEVICE_VENDOR := D-Link + DEVICE_MODEL := DIR-2150 + DEVICE_VARIANT := R1 + DEVICE_PACKAGES := -uboot-envtools kmod-mt7603 kmod-mt7615-firmware kmod-usb3 + KERNEL := $$(KERNEL) + IMAGES += factory.bin + IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \ + check-size | sign-dlink-ru e6587b35a6b34e07bedeca23e140322f +endef +TARGET_DEVICES += dlink_dir-2150-r1 + define Device/dlink_dir-2640-a1 $(Device/dlink_dir_nand_128m) DEVICE_MODEL := DIR-2640 diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index c18724a2be..9a77b1b1bc 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -94,6 +94,7 @@ dlink,dap-x1860-a1) dlink,dir-1960-a1|\ dlink,dir-2055-a1|\ dlink,dir-2150-a1|\ +dlink,dir-2150-r1|\ dlink,dir-2640-a1|\ dlink,dir-2660-a1) ucidef_set_led_netdev "wan" "wan" "white:wan" "wan" diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index 4c8276bd49..97887ca8c3 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -85,6 +85,7 @@ platform_do_upgrade() { dlink,dir-1960-a1|\ dlink,dir-2055-a1|\ dlink,dir-2150-a1|\ + dlink,dir-2150-r1|\ dlink,dir-2640-a1|\ dlink,dir-2660-a1|\ dlink,dir-3040-a1|\ -- 2.30.2