From 9fa5780beea1274d498a224822397100022da7d4 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 18 Sep 2012 12:23:02 +0100 Subject: [PATCH] USB EHCI/Xen: propagate controller reset information to hypervisor Just like for the in-tree early console debug port driver, the hypervisor - when using a debug port based console - also needs to be told about controller resets, so it can suppress using and then re-initialize the debug port accordingly. Other than the in-tree driver, the hypervisor driver actually cares about doing this only for the device where the debug is port actually in use, i.e. it needs to be told the coordinates of the device being reset (quite obviously, leveraging the addition done for that would likely benefit the in-tree driver too). Signed-off-by: Jan Beulich Acked-by: Konrad Rzeszutek Wilk Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/early/ehci-dbgp.c | 17 +++++++++--- drivers/usb/host/ehci-hcd.c | 4 +-- drivers/usb/host/ehci-hub.c | 4 +-- drivers/xen/Makefile | 2 +- drivers/xen/dbgp.c | 48 +++++++++++++++++++++++++++++++++ include/linux/usb/ehci_def.h | 29 +++++++++++++++----- include/xen/interface/physdev.h | 16 +++++++++++ 7 files changed, 105 insertions(+), 15 deletions(-) create mode 100644 drivers/xen/dbgp.c diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index 89dcf155d57e..e426ad626d74 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -491,7 +491,7 @@ static int ehci_wait_for_port(int port); * Return -ENODEV for any general failure * Return -EIO if wait for port fails */ -int dbgp_external_startup(void) +static int _dbgp_external_startup(void) { int devnum; struct usb_debug_descriptor dbgp_desc; @@ -613,6 +613,11 @@ err: goto try_again; return -ENODEV; } + +int dbgp_external_startup(struct usb_hcd *hcd) +{ + return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup(); +} EXPORT_SYMBOL_GPL(dbgp_external_startup); static int ehci_reset_port(int port) @@ -804,7 +809,7 @@ try_next_port: dbgp_ehci_status("ehci skip - already configured"); } - ret = dbgp_external_startup(); + ret = _dbgp_external_startup(); if (ret == -EIO) goto next_debug_port; @@ -934,7 +939,7 @@ static void early_dbgp_write(struct console *con, const char *str, u32 n) ctrl = readl(&ehci_debug->control); if (!(ctrl & DBGP_ENABLED)) { dbgp_not_safe = 1; - dbgp_external_startup(); + _dbgp_external_startup(); } else { cmd |= CMD_RUN; writel(cmd, &ehci_regs->command); @@ -974,10 +979,14 @@ struct console early_dbgp_console = { .index = -1, }; -int dbgp_reset_prep(void) +int dbgp_reset_prep(struct usb_hcd *hcd) { + int ret = xen_dbgp_reset_prep(hcd); u32 ctrl; + if (ret) + return ret; + dbgp_not_safe = 1; if (!ehci_debug) return 0; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b05c6865b610..6bf6c42481e8 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -228,7 +228,7 @@ static int ehci_reset (struct ehci_hcd *ehci) /* If the EHCI debug controller is active, special care must be * taken before and after a host controller reset */ - if (ehci->debug && !dbgp_reset_prep()) + if (ehci->debug && !dbgp_reset_prep(ehci_to_hcd(ehci))) ehci->debug = NULL; command |= CMD_RESET; @@ -251,7 +251,7 @@ static int ehci_reset (struct ehci_hcd *ehci) tdi_reset (ehci); if (ehci->debug) - dbgp_external_startup(); + dbgp_external_startup(ehci_to_hcd(ehci)); ehci->port_c_suspend = ehci->suspended_ports = ehci->resuming_ports = 0; diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index c7880223738a..914ce9370e70 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -353,10 +353,10 @@ static int ehci_bus_resume (struct usb_hcd *hcd) goto shutdown; if (unlikely(ehci->debug)) { - if (!dbgp_reset_prep()) + if (!dbgp_reset_prep(hcd)) ehci->debug = NULL; else - dbgp_external_startup(); + dbgp_external_startup(hcd); } /* Ideally and we've got a real resume here, and no port's power diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index d80bea5535a2..a4a3cab2f459 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_XEN_PVHVM) += platform-pci.o obj-$(CONFIG_XEN_TMEM) += tmem.o obj-$(CONFIG_SWIOTLB_XEN) += swiotlb-xen.o obj-$(CONFIG_XEN_DOM0) += pcpu.o -obj-$(CONFIG_XEN_DOM0) += pci.o acpi.o +obj-$(CONFIG_XEN_DOM0) += pci.o dbgp.o acpi.o obj-$(CONFIG_XEN_MCE_LOG) += mcelog.o obj-$(CONFIG_XEN_PCIDEV_BACKEND) += xen-pciback/ obj-$(CONFIG_XEN_PRIVCMD) += xen-privcmd.o diff --git a/drivers/xen/dbgp.c b/drivers/xen/dbgp.c new file mode 100644 index 000000000000..42569c77ccc8 --- /dev/null +++ b/drivers/xen/dbgp.c @@ -0,0 +1,48 @@ +#include +#include +#include +#include +#include +#include +#include + +static int xen_dbgp_op(struct usb_hcd *hcd, int op) +{ + const struct device *ctrlr = hcd_to_bus(hcd)->controller; + struct physdev_dbgp_op dbgp; + + if (!xen_initial_domain()) + return 0; + + dbgp.op = op; + +#ifdef CONFIG_PCI + if (ctrlr->bus == &pci_bus_type) { + const struct pci_dev *pdev = to_pci_dev(ctrlr); + + dbgp.u.pci.seg = pci_domain_nr(pdev->bus); + dbgp.u.pci.bus = pdev->bus->number; + dbgp.u.pci.devfn = pdev->devfn; + dbgp.bus = PHYSDEVOP_DBGP_BUS_PCI; + } else +#endif + dbgp.bus = PHYSDEVOP_DBGP_BUS_UNKNOWN; + + return HYPERVISOR_physdev_op(PHYSDEVOP_dbgp_op, &dbgp); +} + +int xen_dbgp_reset_prep(struct usb_hcd *hcd) +{ + return xen_dbgp_op(hcd, PHYSDEVOP_DBGP_RESET_PREPARE); +} + +int xen_dbgp_external_startup(struct usb_hcd *hcd) +{ + return xen_dbgp_op(hcd, PHYSDEVOP_DBGP_RESET_DONE); +} + +#ifndef CONFIG_EARLY_PRINTK_DBGP +#include +EXPORT_SYMBOL_GPL(xen_dbgp_reset_prep); +EXPORT_SYMBOL_GPL(xen_dbgp_external_startup); +#endif diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index de4b9ed5d5dd..9a446302b658 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -221,18 +221,35 @@ extern int __init early_dbgp_init(char *s); extern struct console early_dbgp_console; #endif /* CONFIG_EARLY_PRINTK_DBGP */ +struct usb_hcd; + +#ifdef CONFIG_XEN_DOM0 +extern int xen_dbgp_reset_prep(struct usb_hcd *); +extern int xen_dbgp_external_startup(struct usb_hcd *); +#else +static inline int xen_dbgp_reset_prep(struct usb_hcd *hcd) +{ + return 1; /* Shouldn't this be 0? */ +} + +static inline int xen_dbgp_external_startup(struct usb_hcd *hcd) +{ + return -1; +} +#endif + #ifdef CONFIG_EARLY_PRINTK_DBGP /* Call backs from ehci host driver to ehci debug driver */ -extern int dbgp_external_startup(void); -extern int dbgp_reset_prep(void); +extern int dbgp_external_startup(struct usb_hcd *); +extern int dbgp_reset_prep(struct usb_hcd *hcd); #else -static inline int dbgp_reset_prep(void) +static inline int dbgp_reset_prep(struct usb_hcd *hcd) { - return 1; + return xen_dbgp_reset_prep(hcd); } -static inline int dbgp_external_startup(void) +static inline int dbgp_external_startup(struct usb_hcd *hcd) { - return -1; + return xen_dbgp_external_startup(hcd); } #endif diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h index 9ce788d8cf49..bfa1d50fe15b 100644 --- a/include/xen/interface/physdev.h +++ b/include/xen/interface/physdev.h @@ -258,6 +258,22 @@ struct physdev_pci_device { uint8_t devfn; }; +#define PHYSDEVOP_DBGP_RESET_PREPARE 1 +#define PHYSDEVOP_DBGP_RESET_DONE 2 + +#define PHYSDEVOP_DBGP_BUS_UNKNOWN 0 +#define PHYSDEVOP_DBGP_BUS_PCI 1 + +#define PHYSDEVOP_dbgp_op 29 +struct physdev_dbgp_op { + /* IN */ + uint8_t op; + uint8_t bus; + union { + struct physdev_pci_device pci; + } u; +}; + /* * Notify that some PIRQ-bound event channels have been unmasked. * ** This command is obsolete since interface version 0x00030202 and is ** -- 2.30.2