From 9eeb783ed4a11d7eb82d0cb5d23cc214e3827c8d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 23 Aug 2009 15:32:06 +0200 Subject: [PATCH] Staging: rtxx70: merge rt3070 with rt2870 * remove RT30xx ifdefs * add -DRT3070 to rt2870's EXTRA_CFLAGS * because of changes in the way that hardware is initialized/accessed rt3070 driver's firmware should be now also used by rt2870 driver (this is also done by newer out-of-tree vendor driver versions, i.e. 2.1.0.0, historically in-kernel driver was based on 1.4.0.0 version) * change RT28xx_CHIP_NAME to RTxx70 * update rt2870's help entry text * add MODULE_ALIAS("rt3070sta") to rt2870 * update rt3070's dependencies Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rt2860/common/cmm_info.c | 11 --- drivers/staging/rt2860/common/mlme.c | 30 ++----- drivers/staging/rt2860/common/rtmp_init.c | 81 ++++--------------- drivers/staging/rt2860/rt_main_dev.c | 2 +- drivers/staging/rt2860/rtmp.h | 4 +- drivers/staging/rt2870/2870_main_dev.c | 23 +----- drivers/staging/rt2870/Kconfig | 5 +- drivers/staging/rt2870/Makefile | 2 +- drivers/staging/rt2870/common/cmm_data_2870.c | 30 ------- drivers/staging/rt2870/common/rtusb_io.c | 2 - drivers/staging/rt2870/rt2870.h | 9 +-- drivers/staging/rt3070/Kconfig | 2 +- 12 files changed, 33 insertions(+), 168 deletions(-) diff --git a/drivers/staging/rt2860/common/cmm_info.c b/drivers/staging/rt2860/common/cmm_info.c index 05623979e6b8..9d589c240ed0 100644 --- a/drivers/staging/rt2860/common/cmm_info.c +++ b/drivers/staging/rt2860/common/cmm_info.c @@ -1419,17 +1419,6 @@ VOID RTMPSetHT( pAd->CommonCfg.DesiredHtPhy.RxSTBC = 0; } -#ifndef RT30xx -#ifdef RT2870 - /* Frank recommend ,If not, Tx maybe block in high power. Rx has no problem*/ - if(IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020))) - { - pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 0; - pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0; - } -#endif // RT2870 // -#endif - if(pHTPhyMode->SHORTGI == GI_400) { pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 1; diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c index 9de5e240a497..61a2a4eb7140 100644 --- a/drivers/staging/rt2860/common/mlme.c +++ b/drivers/staging/rt2860/common/mlme.c @@ -5565,8 +5565,7 @@ VOID AsicUpdateProtect( } } -#ifdef RT30xx -// add by johnli, RF power sequence setup +#ifdef RT2870 /* ========================================================================== Description: @@ -5721,8 +5720,7 @@ VOID RT30xxReverseRFSleepModeSetup( RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue); } } -// end johnli -#endif // RT30xx // +#endif /* ========================================================================== @@ -5764,9 +5762,7 @@ VOID AsicSwitchChannel( #ifdef RT2870 // The RF programming sequence is difference between 3xxx and 2xxx if ((IS_RT3070(pAd) || IS_RT3090(pAd)) && ( -#ifdef RT30xx (pAd->RfIcType == RFIC_3022) || (pAd->RfIcType == RFIC_3021) || -#endif (pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020))) { /* modify by WY for Read RF Reg. error */ @@ -5789,7 +5785,6 @@ VOID AsicSwitchChannel( RFValue = (RFValue & 0xE0) | TxPwer; RT30xxWriteRFRegister(pAd, RF_R12, RFValue); -#ifdef RT30xx // Set Tx1 Power RT30xxReadRFRegister(pAd, RF_R13, &RFValue); RFValue = (RFValue & 0xE0) | TxPwer2; @@ -5809,7 +5804,6 @@ VOID AsicSwitchChannel( else if (pAd->Antenna.field.RxPath == 2) RFValue |= 0x40; RT30xxWriteRFRegister(pAd, RF_R01, RFValue); -#endif // Set RF offset RT30xxReadRFRegister(pAd, RF_R23, &RFValue); @@ -5827,9 +5821,8 @@ VOID AsicSwitchChannel( RFValue = pAd->Mlme.CaliBW20RfR24; } RT30xxWriteRFRegister(pAd, RF_R24, RFValue); -#ifdef RT30xx RT30xxWriteRFRegister(pAd, RF_R31, RFValue); -#endif + // Enable RF tuning RT30xxReadRFRegister(pAd, RF_R07, &RFValue); RFValue = RFValue | 0x1; @@ -5838,7 +5831,6 @@ VOID AsicSwitchChannel( // latch channel for future usage. pAd->LatchRfRegs.Channel = Channel; -#ifdef RT30xx DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n", Channel, pAd->RfIcType, @@ -5848,8 +5840,6 @@ VOID AsicSwitchChannel( FreqItems3020[index].N, FreqItems3020[index].K, FreqItems3020[index].R)); -#endif - break; } } @@ -6828,13 +6818,13 @@ VOID AsicSetEdcaParm( Ac2Cfg.field.AcTxop = 5; } -#ifdef RT30xx +#ifdef RT2870 if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020) { // Tuning for WiFi WMM S3-T07: connexant legacy sta ==> broadcom 11n sta. Ac2Cfg.field.Aifsn = 5; } -#endif // RT30xx // +#endif } Ac3Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VO]; @@ -6915,11 +6905,10 @@ VOID AsicSetEdcaParm( } AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test -#ifdef RT30xx +#ifdef RT2870 if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020) AifsnCsr.field.Aifsn2 = 0x2; //pEdcaParm->Aifsn[QID_AC_VI]; //for WiFi WMM S4-T04. -#endif // RT30xx // - +#endif RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word); NdisMoveMemory(&pAd->CommonCfg.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM)); @@ -8493,12 +8482,7 @@ VOID AsicStaBbpTuning( #ifdef RT2870 // RT3070 is a no LNA solution, it should have different control regarding to AGC gain control // Otherwise, it will have some throughput side effect when low RSSI -#ifndef RT30xx - if (IS_RT3070(pAd)) -#endif -#ifdef RT30xx if (IS_RT30xx(pAd)) -#endif { if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY) { diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c index e6a43b645022..e7d1ed1224e9 100644 --- a/drivers/staging/rt2860/common/rtmp_init.c +++ b/drivers/staging/rt2860/common/rtmp_init.c @@ -38,16 +38,12 @@ Jan Lee 2006-09-15 RT2860. Change for 802.11n , EEPROM, Led, BA, HT. */ #include "../rt_config.h" -#ifndef RT30xx #ifdef RT2860 #include "firmware.h" #include #endif #ifdef RT2870 -#include "../../rt2870/common/firmware.h" -#endif -#endif -#ifdef RT30xx +/* New firmware handles both RT2870 and RT3070. */ #include "../../rt3070/firmware.h" #endif @@ -147,12 +143,7 @@ REG_PAIR RT30xx_RFRegTable[] = { {RF_R06, 0x02}, {RF_R07, 0x70}, {RF_R09, 0x0F}, -#ifndef RT30xx - {RF_R10, 0x71}, -#endif -#ifdef RT30xx {RF_R10, 0x41}, -#endif {RF_R11, 0x21}, {RF_R12, 0x7B}, {RF_R14, 0x90}, @@ -165,9 +156,6 @@ REG_PAIR RT30xx_RFRegTable[] = { {RF_R21, 0xDB}, {RF_R24, 0x16}, {RF_R25, 0x01}, -#ifndef RT30xx - {RF_R27, 0x03}, -#endif {RF_R29, 0x1F}, }; #define NUM_RF_REG_PARMS (sizeof(RT30xx_RFRegTable) / sizeof(REG_PAIR)) @@ -1107,7 +1095,7 @@ VOID RTMPFilterCalibration( UCHAR RF_R24_Value = 0; // Give bbp filter initial value -#ifndef RT30xx +#ifndef RT2870 pAd->Mlme.CaliBW20RfR24 = 0x16; pAd->Mlme.CaliBW40RfR24 = 0x36; //Bit[5] must be 1 for BW 40 #else @@ -1131,7 +1119,7 @@ VOID RTMPFilterCalibration( BBPValue&= (~0x18); BBPValue|= (0x10); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); -#ifdef RT30xx +#ifdef RT2870 // set to BW40 RT30xxReadRFRegister(pAd, RF_R31, &value); value |= 0x20; @@ -1147,7 +1135,7 @@ VOID RTMPFilterCalibration( FilterTarget = 0x13; else FilterTarget = 0x16; -#ifdef RT30xx +#ifdef RT2870 // set to BW20 RT30xxReadRFRegister(pAd, RF_R31, &value); value &= (~0x20); @@ -1263,20 +1251,13 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd) INT i; // Driver must read EEPROM to get RfIcType before initial RF registers // Initialize RF register to default value - if (IS_RT3070(pAd) -#ifdef RT30xx - || IS_RT3071(pAd) -#else - && (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020) -#endif - ) + if (IS_RT3070(pAd) || IS_RT3071(pAd)) { // Init RF calibration // Driver should toggle RF R30 bit7 before init RF registers UINT32 RfReg = 0; -#ifdef RT30xx UINT32 data; -#endif + RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg); RfReg |= 0x80; RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); @@ -1290,7 +1271,6 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd) RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value); } -#ifdef RT30xx if (IS_RT3070(pAd)) { // Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate @@ -1328,10 +1308,10 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd) data &= ~(0x20); RTUSBWriteMACRegister(pAd, GPIO_SWITCH, data); } -#endif + //For RF filter Calibration RTMPFilterCalibration(pAd); -#ifdef RT30xx + // Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration() if ((pAd->MACVersion & 0xffff) < 0x0211) RT30xxWriteRFRegister(pAd, RF_R27, 0x3); @@ -1346,7 +1326,6 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd) // add by johnli, RF power sequence setup, load RF normal operation-mode setup RT30xxLoadRFNormalModeSetup(pAd); } -#endif } } #endif // RT2870 // @@ -1567,9 +1546,6 @@ VOID NICReadEEPROMParameters( NicConfig2.word = pAd->EEPROMDefaultValue[1]; { -#ifndef RT30xx - NicConfig2.word = 0; -#endif if ((NicConfig2.word & 0x00ff) == 0xff) { NicConfig2.word &= 0xff00; @@ -1806,10 +1782,9 @@ VOID NICInitAsicFromEEPROM( } } -#ifndef RT30xx +#ifndef RT2870 Antenna.word = pAd->Antenna.word; -#endif -#ifdef RT30xx +#else Antenna.word = pAd->EEPROMDefaultValue[0]; if (Antenna.word == 0xFFFF) { @@ -1820,7 +1795,7 @@ VOID NICInitAsicFromEEPROM( pAd->Mlme.RealRxPath = (UCHAR) Antenna.field.RxPath; pAd->RfIcType = (UCHAR) Antenna.field.RfIcType; -#ifdef RT30xx +#ifdef RT2870 DBGPRINT(RT_DEBUG_WARN, ("pAd->RfIcType = %d, RealRxPath=%d, TxPath = %d\n", pAd->RfIcType, pAd->Mlme.RealRxPath,Antenna.field.TxPath)); // Save the antenna for future use @@ -1828,7 +1803,7 @@ VOID NICInitAsicFromEEPROM( #endif NicConfig2.word = pAd->EEPROMDefaultValue[1]; -#ifdef RT30xx +#ifdef RT2870 { if ((NicConfig2.word & 0x00ff) == 0xff) { @@ -1844,7 +1819,7 @@ VOID NICInitAsicFromEEPROM( // Save the antenna for future use pAd->NicConfig2.word = NicConfig2.word; -#ifdef RT30xx +#ifdef RT2870 // set default antenna as main if (pAd->RfIcType == RFIC_3020) AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt); @@ -2251,21 +2226,8 @@ NDIS_STATUS NICInitializeAsic( #endif // RT3070 // RTMP_IO_WRITE32(pAd, (USHORT)MACRegTable[Index].Register, MACRegTable[Index].Value); } - -#ifndef RT30xx - if(IS_RT3070(pAd)) - { - // According to Frank Hsu (from Gary Tsao) - RTMP_IO_WRITE32(pAd, (USHORT)TX_SW_CFG0, 0x00000400); - - // Initialize RT3070 serial MAC registers which is different from RT2870 serial - RTUSBWriteMACRegister(pAd, TX_SW_CFG1, 0); - RTUSBWriteMACRegister(pAd, TX_SW_CFG2, 0); - } -#endif #endif // RT2870 // - { for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++) { @@ -2300,7 +2262,7 @@ NDIS_STATUS NICInitializeAsic( RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0); } } -#ifdef RT30xx +#ifdef RT2870 else if (IS_RT3070(pAd)) { RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0); @@ -2347,22 +2309,11 @@ NDIS_STATUS NICInitializeAsic( RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register, BBPRegTable[Index].Value); } -#ifndef RT30xx +#ifndef RT2870 // for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT. if ((pAd->MACVersion&0xffff) != 0x0101) RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19); - -#ifdef RT2870 - //write RT3070 BBP wchich different with 2870 after write RT2870 BBP - if (IS_RT3070(pAd)) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0a); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x99); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R105, 0x05); - } -#endif // RT2870 // -#endif -#ifdef RT30xx +#else // for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT. // RT3090 should not program BBP R84 to 0x19, otherwise TX will block. if (((pAd->MACVersion&0xffff) != 0x0101) && (!IS_RT30xx(pAd))) diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c index b4111e55b063..7f4441462a12 100644 --- a/drivers/staging/rt2860/rt_main_dev.c +++ b/drivers/staging/rt2860/rt_main_dev.c @@ -522,7 +522,7 @@ static int rt28xx_init(IN struct net_device *net_dev) AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); AsicLockChannel(pAd, pAd->CommonCfg.Channel); -#ifndef RT30xx +#ifndef RT2870 // 8051 firmware require the signal during booting time. AsicSendCommandToMcu(pAd, 0x72, 0xFF, 0x00, 0x00); #endif diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h index 8c1737901c75..3f498f6f3ff6 100644 --- a/drivers/staging/rt2860/rtmp.h +++ b/drivers/staging/rt2860/rtmp.h @@ -391,14 +391,14 @@ typedef struct _QUEUE_HEADER { (_idx) = (_idx+1) % (_RingSize); \ } -#ifdef RT30xx +#ifdef RT2870 // We will have a cost down version which mac version is 0x3090xxxx #define IS_RT3090(_pAd) ((((_pAd)->MACVersion & 0xffff0000) == 0x30710000) || (((_pAd)->MACVersion & 0xffff0000) == 0x30900000)) #else #define IS_RT3090(_pAd) 0 #endif #define IS_RT3070(_pAd) (((_pAd)->MACVersion & 0xffff0000) == 0x30700000) -#ifdef RT30xx +#ifdef RT2870 #define IS_RT3071(_pAd) (((_pAd)->MACVersion & 0xffff0000) == 0x30710000) #define IS_RT30xx(_pAd) (((_pAd)->MACVersion & 0xfff00000) == 0x30700000) #endif diff --git a/drivers/staging/rt2870/2870_main_dev.c b/drivers/staging/rt2870/2870_main_dev.c index b725c750a11d..d0ed48bed2bb 100644 --- a/drivers/staging/rt2870/2870_main_dev.c +++ b/drivers/staging/rt2870/2870_main_dev.c @@ -50,6 +50,7 @@ MODULE_LICENSE("GPL"); #ifdef MODULE_VERSION MODULE_VERSION(STA_DRIVER_VERSION); #endif +MODULE_ALIAS("rt3070sta"); /* Kernel thread and vars, which handles packets that are completed. Only * packets that have a "complete" function are sent here. This way, the @@ -65,19 +66,15 @@ struct usb_device_id rtusb_usb_id[] = { { USB_DEVICE(0x1737, 0x0070) }, /* Linksys */ { USB_DEVICE(0x148F, 0x2870) }, /* Ralink */ { USB_DEVICE(0x148F, 0x3070) }, /* Ralink 3070 */ -#ifdef RT30xx { USB_DEVICE(0x148F, 0x3071) }, /* Ralink 3071 */ { USB_DEVICE(0x148F, 0x3072) }, /* Ralink 3072 */ -#endif { USB_DEVICE(0x0B05, 0x1731) }, /* Asus */ { USB_DEVICE(0x0B05, 0x1732) }, /* Asus */ { USB_DEVICE(0x0B05, 0x1742) }, /* Asus */ { USB_DEVICE(0x0DF6, 0x0017) }, /* Sitecom */ { USB_DEVICE(0x0DF6, 0x002B) }, /* Sitecom */ { USB_DEVICE(0x0DF6, 0x002C) }, /* Sitecom */ -#ifdef RT30xx { USB_DEVICE(0x0DF6, 0x003E) }, /* Sitecom 3070 */ -#endif { USB_DEVICE(0x0DF6, 0x002D) }, /* Sitecom */ { USB_DEVICE(0x0DF6, 0x0039) }, /* Sitecom 2770 */ { USB_DEVICE(0x0DF6, 0x003F) }, /* Sitecom WL-608 */ @@ -88,10 +85,8 @@ struct usb_device_id rtusb_usb_id[] = { { USB_DEVICE(0x2019, 0xAB25) }, /* Planex Communications, Inc. RT3070 */ { USB_DEVICE(0x07D1, 0x3C09) }, /* D-Link */ { USB_DEVICE(0x07D1, 0x3C11) }, /* D-Link */ -#ifdef RT30xx { USB_DEVICE(0x2001, 0x3C09) }, /* D-Link */ { USB_DEVICE(0x2001, 0x3C0A) }, /* D-Link 3072*/ -#endif { USB_DEVICE(0x14B2, 0x3C07) }, /* AL */ { USB_DEVICE(0x14B2, 0x3C12) }, /* AL 3070 */ { USB_DEVICE(0x050D, 0x8053) }, /* Belkin */ @@ -104,34 +99,24 @@ struct usb_device_id rtusb_usb_id[] = { { USB_DEVICE(0x07AA, 0x003F) }, /* Corega */ { USB_DEVICE(0x18C5, 0x0012) }, /* Corega 3070 */ { USB_DEVICE(0x1044, 0x800B) }, /* Gigabyte */ -#ifdef RT30xx { USB_DEVICE(0x1044, 0x800D) }, /* Gigabyte GN-WB32L 3070 */ -#endif { USB_DEVICE(0x15A9, 0x0006) }, /* Sparklan */ { USB_DEVICE(0x083A, 0xB522) }, /* SMC */ { USB_DEVICE(0x083A, 0xA618) }, /* SMC */ -#ifdef RT30xx { USB_DEVICE(0x083A, 0x8522) }, /* Arcadyan */ { USB_DEVICE(0x083A, 0x7512) }, /* Arcadyan 2770 */ -#endif { USB_DEVICE(0x083A, 0x7522) }, /* Arcadyan */ -#ifdef RT30xx { USB_DEVICE(0x083A, 0x7511) }, /* Arcadyan 3070 */ -#endif { USB_DEVICE(0x0CDE, 0x0022) }, /* ZCOM */ { USB_DEVICE(0x0586, 0x3416) }, /* Zyxel */ { USB_DEVICE(0x0CDE, 0x0025) }, /* Zyxel */ { USB_DEVICE(0x1740, 0x9701) }, /* EnGenius */ { USB_DEVICE(0x1740, 0x9702) }, /* EnGenius */ -#ifdef RT30xx { USB_DEVICE(0x1740, 0x9703) }, /* EnGenius 3070 */ -#endif { USB_DEVICE(0x0471, 0x200f) }, /* Philips */ { USB_DEVICE(0x14B2, 0x3C25) }, /* Draytek */ { USB_DEVICE(0x13D3, 0x3247) }, /* AzureWave */ -#ifdef RT30xx { USB_DEVICE(0x13D3, 0x3273) }, /* AzureWave 3070*/ -#endif { USB_DEVICE(0x083A, 0x6618) }, /* Accton */ { USB_DEVICE(0x15c5, 0x0008) }, /* Amit */ { USB_DEVICE(0x0E66, 0x0001) }, /* Hawking */ @@ -146,23 +131,17 @@ struct usb_device_id rtusb_usb_id[] = { { USB_DEVICE(0x07B8, 0x3071) }, /* AboCom 3071 */ { USB_DEVICE(0x07B8, 0x2870) }, /* AboCom */ { USB_DEVICE(0x07B8, 0x2770) }, /* AboCom */ -#ifdef RT30xx { USB_DEVICE(0x07B8, 0x3072) }, /* Abocom 3072 */ -#endif { USB_DEVICE(0x7392, 0x7711) }, /* Edimax 3070 */ { USB_DEVICE(0x5A57, 0x0280) }, /* Zinwell */ { USB_DEVICE(0x5A57, 0x0282) }, /* Zinwell */ -#ifdef RT30xx { USB_DEVICE(0x1A32, 0x0304) }, /* Quanta 3070 */ -#endif { USB_DEVICE(0x0789, 0x0162) }, /* Logitec 2870 */ { USB_DEVICE(0x0789, 0x0163) }, /* Logitec 2870 */ { USB_DEVICE(0x0789, 0x0164) }, /* Logitec 2870 */ { USB_DEVICE(0x7392, 0x7717) }, /* Edimax */ -#ifdef RT30xx { USB_DEVICE(0x1EDA, 0x2310) }, /* AirTies 3070 */ { USB_DEVICE(0x1737, 0x0077) }, /* Linksys WUSB54GC-EU v3 */ -#endif { } /* Terminating entry */ }; diff --git a/drivers/staging/rt2870/Kconfig b/drivers/staging/rt2870/Kconfig index 8398d9797e1d..76841f6dea93 100644 --- a/drivers/staging/rt2870/Kconfig +++ b/drivers/staging/rt2870/Kconfig @@ -1,6 +1,5 @@ config RT2870 - tristate "Ralink 2870 wireless support" + tristate "Ralink 2870/3070 wireless support" depends on USB && X86 && WLAN_80211 ---help--- - This is an experimental driver for the Ralink 2870 wireless chip. - + This is an experimental driver for the Ralink xx70 wireless chips. diff --git a/drivers/staging/rt2870/Makefile b/drivers/staging/rt2870/Makefile index 3c17921b74aa..306c33113c58 100644 --- a/drivers/staging/rt2870/Makefile +++ b/drivers/staging/rt2870/Makefile @@ -2,7 +2,7 @@ obj-$(CONFIG_RT2870) += rt2870sta.o # TODO: all of these should be removed EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT -EXTRA_CFLAGS += -DRT2870 +EXTRA_CFLAGS += -DRT2870 -DRT3070 EXTRA_CFLAGS += -DDBG rt2870sta-objs := \ diff --git a/drivers/staging/rt2870/common/cmm_data_2870.c b/drivers/staging/rt2870/common/cmm_data_2870.c index d6fc056f81d9..3b63a48310f0 100644 --- a/drivers/staging/rt2870/common/cmm_data_2870.c +++ b/drivers/staging/rt2870/common/cmm_data_2870.c @@ -810,12 +810,7 @@ VOID RT28xxUsbStaAsicForceWakeup( AutoWakeupCfg.word = 0; RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); -#ifndef RT30xx - AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x00); -#endif -#ifdef RT30xx AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02); -#endif OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE); } @@ -852,12 +847,7 @@ VOID RT28xxUsbMlmeRadioOn( if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) return; -#ifndef RT30xx - AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x00); -#endif -#ifdef RT30xx AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02); -#endif RTMPusecDelay(10000); NICResetFromError(pAd); @@ -908,22 +898,6 @@ VOID RT28xxUsbMlmeRadioOFF( BssTableInit(&pAd->ScanTab); } -#ifndef RT30xx - // Disable MAC Tx/Rx - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value &= (0xfffffff3); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - - // MAC_SYS_CTRL => value = 0x0 => 40mA - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0); - - // PWR_PIN_CFG => value = 0x0 => 40mA - RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0); - - // TX_PIN_CFG => value = 0x0 => 20mA - RTMP_IO_WRITE32(pAd, TX_PIN_CFG, 0); -#endif - if (pAd->CommonCfg.BBPCurrentBW == BW_40) { // Must using 40MHz. @@ -935,13 +909,11 @@ VOID RT28xxUsbMlmeRadioOFF( AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel); } -#ifdef RT30xx // Disable Tx/Rx DMA RTUSBReadMACRegister(pAd, WPDMA_GLO_CFG, &GloCfg.word); // disable DMA GloCfg.field.EnableTxDMA = 0; GloCfg.field.EnableRxDMA = 0; RTUSBWriteMACRegister(pAd, WPDMA_GLO_CFG, GloCfg.word); // abort all TX rings -#endif // Waiting for DMA idle i = 0; @@ -954,12 +926,10 @@ VOID RT28xxUsbMlmeRadioOFF( RTMPusecDelay(1000); }while (i++ < 100); -#ifdef RT30xx // Disable MAC Tx/Rx RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); Value &= (0xfffffff3); RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); -#endif AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02); } diff --git a/drivers/staging/rt2870/common/rtusb_io.c b/drivers/staging/rt2870/common/rtusb_io.c index 94a3c5e0b2d9..1d69590421a3 100644 --- a/drivers/staging/rt2870/common/rtusb_io.c +++ b/drivers/staging/rt2870/common/rtusb_io.c @@ -110,11 +110,9 @@ NTSTATUS RTUSBFirmwareWrite( Status = RTUSBWriteMACRegister(pAd, 0x701c, 0xffffffff); Status = RTUSBFirmwareRun(pAd); -#ifdef RT30xx RTMPusecDelay(10000); RTUSBWriteMACRegister(pAd,H2M_MAILBOX_CSR,0); AsicSendCommandToMcu(pAd, 0x72, 0x00, 0x00, 0x00);//reset rf by MCU supported by new firmware -#endif return Status; } diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h index 131f3329ac9c..4c67bafad4e6 100644 --- a/drivers/staging/rt2870/rt2870.h +++ b/drivers/staging/rt2870/rt2870.h @@ -349,11 +349,8 @@ extern UCHAR EpToQueue[6]; { RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_PSPOLL); \ RTUSBKickBulkOut(pAd); } -#ifdef RT30xx -#define RT28xx_CHIP_NAME "RT3070" -#else -#define RT28xx_CHIP_NAME "RT2870" -#endif +#define RT28xx_CHIP_NAME "RTxx70" + #define USB_CYC_CFG 0x02a4 #define STATUS_SUCCESS 0x00 #define STATUS_UNSUCCESSFUL 0x01 @@ -462,9 +459,7 @@ typedef struct _RT_SET_ASIC_WCID { ULONG WCID; // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based ULONG SetTid; // time-based: seconds, packet-based: kilo-packets ULONG DeleteTid; // time-based: seconds, packet-based: kilo-packets -#ifndef RT30xx UCHAR Addr[MAC_ADDR_LEN]; // avoid in interrupt when write key -#endif } RT_SET_ASIC_WCID,*PRT_SET_ASIC_WCID; typedef struct _RT_SET_ASIC_WCID_ATTRI { diff --git a/drivers/staging/rt3070/Kconfig b/drivers/staging/rt3070/Kconfig index b37fb5d13a4f..652d825338e8 100644 --- a/drivers/staging/rt3070/Kconfig +++ b/drivers/staging/rt3070/Kconfig @@ -1,6 +1,6 @@ config RT3070 tristate "Ralink 3070 wireless support" - depends on USB && X86 && WLAN_80211 + depends on USB && X86 && WLAN_80211 && !RT2870 ---help--- This is an experimental driver for the Ralink 3070 wireless chip. -- 2.30.2