From 9ec0db71af04f4560e27a3c2f5a0411ba3155198 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Mon, 4 Jun 2012 05:51:18 +0000 Subject: [PATCH] net: icplus: fix interrupt mask This patch fixes the interrupt mask for IC101 A/G devices and now enables the link/speed/duplex interrupts. This is done by setting the "INTR pin used" bit and cleaning all the other bits in the Register 17. Reported-by: Stuart Menefy Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/phy/icplus.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index 5ac46f5226f3..47f8e8939266 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -41,6 +41,8 @@ MODULE_LICENSE("GPL"); #define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ #define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */ #define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */ +#define IP101A_G_IRQ_PIN_USED (1<<15) /* INTR pin used */ +#define IP101A_G_IRQ_DEFAULT IP101A_G_IRQ_PIN_USED static int ip175c_config_init(struct phy_device *phydev) { @@ -136,6 +138,11 @@ static int ip1001_config_init(struct phy_device *phydev) if (c < 0) return c; + /* INTR pin used: speed/link/duplex will cause an interrupt */ + c = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, IP101A_G_IRQ_DEFAULT); + if (c < 0) + return c; + if (phydev->interface == PHY_INTERFACE_MODE_RGMII) { /* Additional delay (2ns) used to adjust RX clock phase * at RGMII interface */ -- 2.30.2