From 9eb933130df2f8e67aba4f76565fe6604150a542 Mon Sep 17 00:00:00 2001 From: Mathieu Poirier Date: Tue, 3 May 2016 11:33:39 -0600 Subject: [PATCH] coresight: stm: Bindings for System Trace Macrocell The System Trace Macrocell (STM) is an IP block falling under the CoreSight umbrella. It's main purpose it so expose stimulus channels to any system component for the purpose of information logging. Bindings for this IP block adds a couple of items to the current mandatory definition for CoreSight components. Signed-off-by: Mathieu Poirier Acked-by: Rob Herring Signed-off-by: Chunyan Zhang Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/arm/coresight.txt | 28 +++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt index 62938eb9697f..93147c0c8a0e 100644 --- a/Documentation/devicetree/bindings/arm/coresight.txt +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -19,6 +19,7 @@ its hardware characteristcs. - "arm,coresight-etm3x", "arm,primecell"; - "arm,coresight-etm4x", "arm,primecell"; - "qcom,coresight-replicator1x", "arm,primecell"; + - "arm,coresight-stm", "arm,primecell"; [1] * reg: physical base address and length of the register set(s) of the component. @@ -36,6 +37,14 @@ its hardware characteristcs. layout using the generic DT graph presentation found in "bindings/graph.txt". +* Additional required properties for System Trace Macrocells (STM): + * reg: along with the physical base address and length of the register + set as described above, another entry is required to describe the + mapping of the extended stimulus port area. + + * reg-names: the only acceptable values are "stm-base" and + "stm-stimulus-base", each corresponding to the areas defined in "reg". + * Required properties for devices that don't show up on the AMBA bus, such as non-configurable replicators: @@ -202,3 +211,22 @@ Example: }; }; }; + +4. STM + stm@20100000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x20100000 0 0x1000>, + <0 0x28000000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + port { + stm_out_port: endpoint { + remote-endpoint = <&main_funnel_in_port2>; + }; + }; + }; + +[1]. There is currently two version of STM: STM32 and STM500. Both +have the same HW interface and as such don't need an explicit binding name. -- 2.30.2