From 9e7a8beb9c0ed3105f86465bc64dfc79bae34d1f Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Thu, 5 Dec 2019 01:24:55 +0100 Subject: [PATCH] ipq806x: add missing gpio and gsbi declaration Adds missing gpio and gsbi declaration. Signed-off-by: Christian Lamparter Signed-off-by: Ansuel Smith --- .../arch/arm/boot/dts/qcom-ipq8064.dtsi | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi index a7a9c49fc55..efaa6abd784 100644 --- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -656,6 +656,34 @@ output-low; }; }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + }; + + leds_pins: leds_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", + "gpio26", "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + output-low; + }; + }; + + buttons_pins: buttons_pins { + mux { + pins = "gpio54"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; intc: interrupt-controller@2000000 { @@ -852,6 +880,29 @@ }; }; + gsbi7: gsbi@16600000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <7>; + reg = <0x16600000 0x100>; + clocks = <&gcc GSBI7_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + syscon-tcsr = <&tcsr>; + + gsbi7_serial: serial@16640000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16640000 0x1000>, + <0x16600000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + sata_phy: sata-phy@1b400000 { compatible = "qcom,ipq806x-sata-phy"; reg = <0x1b400000 0x200>; -- 2.30.2