From 9e23f50a762c236049b4965a42d86d55fcdbbfb3 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Wed, 4 Jul 2012 17:36:55 -0300 Subject: [PATCH] [media] drxk: Make the QAM demodulator command parameters configurable Currently there are two different implementations (in the firmware) for the QAM demodulator command: one takes 4 and the other takes 2 parameters. The driver shows an error in dmesg When using the 4-parameter command with firmware that implements the 2-parameter command. Unfortunately this happens every time when chaning the frequency (on DVB-C). This patch simply makes configurable, how many command parameters will be used. All existing drxk_config instances using the "drxk_a3.mc" were updated because this firmware is the only loadable firmware where the QAM demodulator command takes 4 parameters. Some firmwares in the ROM might also use it. The drxk instances in the em28xx-dvb driver were also updated to silence the warnings. If no qam_demod_parameter_count is given in the drxk_config struct, then the correct number of parameters will be auto-detected. [mchehab@redhat.com: Fix a small CodingStyle issue at one comment] Signed-off-by: Martin Blumenstingl Tested-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/ddbridge/ddbridge-core.c | 1 + drivers/media/dvb/frontends/drxk.h | 11 +- drivers/media/dvb/frontends/drxk_hard.c | 112 ++++++++++++++++----- drivers/media/dvb/frontends/drxk_hard.h | 1 + drivers/media/dvb/ngene/ngene-cards.c | 1 + drivers/media/video/em28xx/em28xx-dvb.c | 4 + 6 files changed, 104 insertions(+), 26 deletions(-) diff --git a/drivers/media/dvb/ddbridge/ddbridge-core.c b/drivers/media/dvb/ddbridge/ddbridge-core.c index 131b938e9e81..ebf3f05839d2 100644 --- a/drivers/media/dvb/ddbridge/ddbridge-core.c +++ b/drivers/media/dvb/ddbridge/ddbridge-core.c @@ -578,6 +578,7 @@ static int demod_attach_drxk(struct ddb_input *input) memset(&config, 0, sizeof(config)); config.microcode_name = "drxk_a3.mc"; + config.qam_demod_parameter_count = 4; config.adr = 0x29 + (input->nr & 1); fe = input->fe = dvb_attach(drxk_attach, &config, i2c); diff --git a/drivers/media/dvb/frontends/drxk.h b/drivers/media/dvb/frontends/drxk.h index 9d64e4fea066..d615d7d055a2 100644 --- a/drivers/media/dvb/frontends/drxk.h +++ b/drivers/media/dvb/frontends/drxk.h @@ -20,6 +20,14 @@ * means that 1=DVBC, 0 = DVBT. Zero means the opposite. * @mpeg_out_clk_strength: DRXK Mpeg output clock drive strength. * @microcode_name: Name of the firmware file with the microcode + * @qam_demod_parameter_count: The number of parameters used for the command + * to set the demodulator parameters. All + * firmwares are using the 2-parameter commmand. + * An exception is the "drxk_a3.mc" firmware, + * which uses the 4-parameter command. + * A value of 0 (default) or lower indicates that + * the correct number of parameters will be + * automatically detected. * * On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is * UIO-3. @@ -38,7 +46,8 @@ struct drxk_config { u8 mpeg_out_clk_strength; int chunk_size; - const char *microcode_name; + const char *microcode_name; + int qam_demod_parameter_count; }; #if defined(CONFIG_DVB_DRXK) || (defined(CONFIG_DVB_DRXK_MODULE) \ diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c index 317530f891c0..f370ec1c9bd3 100644 --- a/drivers/media/dvb/frontends/drxk_hard.c +++ b/drivers/media/dvb/frontends/drxk_hard.c @@ -5415,12 +5415,67 @@ static int GetQAMLockStatus(struct drxk_state *state, u32 *pLockStatus) #define QAM_LOCKRANGE__M 0x10 #define QAM_LOCKRANGE_NORMAL 0x10 +static int QAMDemodulatorCommand(struct drxk_state *state, + int numberOfParameters) +{ + int status; + u16 cmdResult; + u16 setParamParameters[4] = { 0, 0, 0, 0 }; + + setParamParameters[0] = state->m_Constellation; /* modulation */ + setParamParameters[1] = DRXK_QAM_I12_J17; /* interleave mode */ + + if (numberOfParameters == 2) { + u16 setEnvParameters[1] = { 0 }; + + if (state->m_OperationMode == OM_QAM_ITU_C) + setEnvParameters[0] = QAM_TOP_ANNEX_C; + else + setEnvParameters[0] = QAM_TOP_ANNEX_A; + + status = scu_command(state, + SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, + 1, setEnvParameters, 1, &cmdResult); + if (status < 0) + goto error; + + status = scu_command(state, + SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, + numberOfParameters, setParamParameters, + 1, &cmdResult); + } else if (numberOfParameters == 4) { + if (state->m_OperationMode == OM_QAM_ITU_C) + setParamParameters[2] = QAM_TOP_ANNEX_C; + else + setParamParameters[2] = QAM_TOP_ANNEX_A; + + setParamParameters[3] |= (QAM_MIRROR_AUTO_ON); + /* Env parameters */ + /* check for LOCKRANGE Extented */ + /* setParamParameters[3] |= QAM_LOCKRANGE_NORMAL; */ + + status = scu_command(state, + SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, + numberOfParameters, setParamParameters, + 1, &cmdResult); + } else { + printk(KERN_WARNING "drxk: Unknown QAM demodulator parameter " + "count %d\n", numberOfParameters); + } + +error: + if (status < 0) + printk(KERN_WARNING "drxk: Warning %d on %s\n", + status, __func__); + return status; +} + static int SetQAM(struct drxk_state *state, u16 IntermediateFreqkHz, s32 tunerFreqOffset) { int status; - u16 setParamParameters[4] = { 0, 0, 0, 0 }; u16 cmdResult; + int qamDemodParamCount = state->qam_demod_parameter_count; dprintk(1, "\n"); /* @@ -5472,34 +5527,40 @@ static int SetQAM(struct drxk_state *state, u16 IntermediateFreqkHz, } if (status < 0) goto error; - setParamParameters[0] = state->m_Constellation; /* modulation */ - setParamParameters[1] = DRXK_QAM_I12_J17; /* interleave mode */ - if (state->m_OperationMode == OM_QAM_ITU_C) - setParamParameters[2] = QAM_TOP_ANNEX_C; - else - setParamParameters[2] = QAM_TOP_ANNEX_A; - setParamParameters[3] |= (QAM_MIRROR_AUTO_ON); - /* Env parameters */ - /* check for LOCKRANGE Extented */ - /* setParamParameters[3] |= QAM_LOCKRANGE_NORMAL; */ - status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, 4, setParamParameters, 1, &cmdResult); - if (status < 0) { - /* Fall-back to the simpler call */ - if (state->m_OperationMode == OM_QAM_ITU_C) - setParamParameters[0] = QAM_TOP_ANNEX_C; - else - setParamParameters[0] = QAM_TOP_ANNEX_A; - status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, 1, setParamParameters, 1, &cmdResult); - if (status < 0) - goto error; + /* Use the 4-parameter if it's requested or we're probing for + * the correct command. */ + if (state->qam_demod_parameter_count == 4 + || !state->qam_demod_parameter_count) { + qamDemodParamCount = 4; + status = QAMDemodulatorCommand(state, qamDemodParamCount); + } - setParamParameters[0] = state->m_Constellation; /* modulation */ - setParamParameters[1] = DRXK_QAM_I12_J17; /* interleave mode */ - status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, 2, setParamParameters, 1, &cmdResult); + /* Use the 2-parameter command if it was requested or if we're + * probing for the correct command and the 4-parameter command + * failed. */ + if (state->qam_demod_parameter_count == 2 + || (!state->qam_demod_parameter_count && status < 0)) { + qamDemodParamCount = 2; + status = QAMDemodulatorCommand(state, qamDemodParamCount); } - if (status < 0) + + if (status < 0) { + dprintk(1, "Could not set demodulator parameters. Make " + "sure qam_demod_parameter_count (%d) is correct for " + "your firmware (%s).\n", + state->qam_demod_parameter_count, + state->microcode_name); goto error; + } else if (!state->qam_demod_parameter_count) { + dprintk(1, "Auto-probing the correct QAM demodulator command " + "parameters was successful - using %d parameters.\n", + qamDemodParamCount); + + /* One of our commands was successful. We don't need to + /* auto-probe anymore, now that we got the correct command. */ + state->qam_demod_parameter_count = qamDemodParamCount; + } /* * STEP 3: enable the system in a mode where the ADC provides valid @@ -6502,6 +6563,7 @@ struct dvb_frontend *drxk_attach(const struct drxk_config *config, state->demod_address = adr; state->single_master = config->single_master; state->microcode_name = config->microcode_name; + state->qam_demod_parameter_count = config->qam_demod_parameter_count; state->no_i2c_bridge = config->no_i2c_bridge; state->antenna_gpio = config->antenna_gpio; state->antenna_dvbt = config->antenna_dvbt; diff --git a/drivers/media/dvb/frontends/drxk_hard.h b/drivers/media/dvb/frontends/drxk_hard.h index f41779700106..6bb9fc4a7b96 100644 --- a/drivers/media/dvb/frontends/drxk_hard.h +++ b/drivers/media/dvb/frontends/drxk_hard.h @@ -353,6 +353,7 @@ struct drxk_state { const char *microcode_name; struct completion fw_wait_load; const struct firmware *fw; + int qam_demod_parameter_count; }; #define NEVER_LOCK 0 diff --git a/drivers/media/dvb/ngene/ngene-cards.c b/drivers/media/dvb/ngene/ngene-cards.c index 7539a5d71029..72ee8de02260 100644 --- a/drivers/media/dvb/ngene/ngene-cards.c +++ b/drivers/media/dvb/ngene/ngene-cards.c @@ -217,6 +217,7 @@ static int demod_attach_drxk(struct ngene_channel *chan, memset(&config, 0, sizeof(config)); config.microcode_name = "drxk_a3.mc"; + config.qam_demod_parameter_count = 4; config.adr = 0x29 + (chan->number ^ 2); chan->fe = dvb_attach(drxk_attach, &config, i2c); diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index f8ffe102d295..a16531fa937a 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -315,6 +315,7 @@ static struct drxk_config terratec_h5_drxk = { .single_master = 1, .no_i2c_bridge = 1, .microcode_name = "dvb-usb-terratec-h5-drxk.fw", + .qam_demod_parameter_count = 2, }; static struct drxk_config hauppauge_930c_drxk = { @@ -323,6 +324,7 @@ static struct drxk_config hauppauge_930c_drxk = { .no_i2c_bridge = 1, .microcode_name = "dvb-usb-hauppauge-hvr930c-drxk.fw", .chunk_size = 56, + .qam_demod_parameter_count = 2, }; struct drxk_config terratec_htc_stick_drxk = { @@ -331,6 +333,7 @@ struct drxk_config terratec_htc_stick_drxk = { .no_i2c_bridge = 1, .microcode_name = "dvb-usb-terratec-htc-stick-drxk.fw", .chunk_size = 54, + .qam_demod_parameter_count = 2, /* Required for the antenna_gpio to disable LNA. */ .antenna_dvbt = true, /* The windows driver uses the same. This will disable LNA. */ @@ -347,6 +350,7 @@ static struct drxk_config pctv_520e_drxk = { .adr = 0x29, .single_master = 1, .microcode_name = "dvb-demod-drxk-pctv.fw", + .qam_demod_parameter_count = 2, .chunk_size = 58, .antenna_dvbt = true, /* disable LNA */ .antenna_gpio = (1 << 2), /* disable LNA */ -- 2.30.2