From 9dc53852b10888f9032baf78d672b45ab4d791fe Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 20 May 2016 14:49:13 +0100 Subject: [PATCH] staging: comedi: drivers: re-do PLX PCI 9080 INTCSR register values Replace the existing macros in "plx9080.h" that define values for the INTCSR register. Use the prefix `PLX_INTCSR_` for the macros. Make use of the `BIT(x)` and `GENMASK(h,l)` macros to define the values. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/cb_pcidas64.c | 14 +-- drivers/staging/comedi/drivers/gsc_hpdi.c | 14 +-- drivers/staging/comedi/drivers/plx9080.h | 91 ++++++++++++++------ drivers/staging/comedi/drivers/rtd520.c | 3 +- 4 files changed, 83 insertions(+), 39 deletions(-) diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c index 4a8e88aeb57f..6b3f4dcdff46 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas64.c +++ b/drivers/staging/comedi/drivers/cb_pcidas64.c @@ -1336,8 +1336,9 @@ static void init_plx9080(struct comedi_device *dev) /* enable interrupts on plx 9080 */ devpriv->plx_intcsr_bits |= - ICS_AERR | ICS_PERR | ICS_PIE | ICS_PLIE | ICS_PAIE | ICS_LIE | - ICS_DMA0_E | ICS_DMA1_E; + PLX_INTCSR_LSEABORTEN | PLX_INTCSR_LSEPARITYEN | PLX_INTCSR_PIEN | + PLX_INTCSR_PLIEN | PLX_INTCSR_PABORTIEN | PLX_INTCSR_LIOEN | + PLX_INTCSR_DMA0IEN | PLX_INTCSR_DMA1IEN; writel(devpriv->plx_intcsr_bits, devpriv->plx9080_iobase + PLX_REG_INTCSR); } @@ -2836,7 +2837,7 @@ static void handle_ai_interrupt(struct comedi_device *dev, /* spin lock makes sure no one else changes plx dma control reg */ spin_lock_irqsave(&dev->spinlock, flags); dma1_status = readb(devpriv->plx9080_iobase + PLX_REG_DMACSR1); - if (plx_status & ICS_DMA1_A) { /* dma chan 1 interrupt */ + if (plx_status & PLX_INTCSR_DMA1IA) { /* dma chan 1 interrupt */ writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT, devpriv->plx9080_iobase + PLX_REG_DMACSR1); @@ -3014,7 +3015,7 @@ static void handle_ao_interrupt(struct comedi_device *dev, /* spin lock makes sure no one else changes plx dma control reg */ spin_lock_irqsave(&dev->spinlock, flags); dma0_status = readb(devpriv->plx9080_iobase + PLX_REG_DMACSR0); - if (plx_status & ICS_DMA0_A) { /* dma chan 0 interrupt */ + if (plx_status & PLX_INTCSR_DMA0IA) { /* dma chan 0 interrupt */ if ((dma0_status & PLX_DMA_EN_BIT) && !(dma0_status & PLX_DMA_DONE_BIT)) { writeb(PLX_DMA_EN_BIT | PLX_CLEAR_DMA_INTR_BIT, @@ -3067,8 +3068,9 @@ static irqreturn_t handle_interrupt(int irq, void *d) handle_ai_interrupt(dev, status, plx_status); handle_ao_interrupt(dev, status, plx_status); - /* clear possible plx9080 interrupt sources */ - if (plx_status & ICS_LDIA) { /* clear local doorbell interrupt */ + /* clear possible plx9080 interrupt sources */ + if (plx_status & PLX_INTCSR_LDBIA) { + /* clear local doorbell interrupt */ plx_bits = readl(devpriv->plx9080_iobase + PLX_REG_L2PDBELL); writel(plx_bits, devpriv->plx9080_iobase + PLX_REG_L2PDBELL); } diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c index 536bebeb5f53..e28879801085 100644 --- a/drivers/staging/comedi/drivers/gsc_hpdi.c +++ b/drivers/staging/comedi/drivers/gsc_hpdi.c @@ -199,7 +199,8 @@ static irqreturn_t gsc_hpdi_interrupt(int irq, void *d) return IRQ_NONE; plx_status = readl(devpriv->plx9080_mmio + PLX_REG_INTCSR); - if ((plx_status & (ICS_DMA0_A | ICS_DMA1_A | ICS_LIA)) == 0) + if ((plx_status & + (PLX_INTCSR_DMA0IA | PLX_INTCSR_DMA1IA | PLX_INTCSR_PLIA)) == 0) return IRQ_NONE; hpdi_intr_status = readl(dev->mmio + INTERRUPT_STATUS_REG); @@ -211,7 +212,7 @@ static irqreturn_t gsc_hpdi_interrupt(int irq, void *d) /* spin lock makes sure no one else changes plx dma control reg */ spin_lock_irqsave(&dev->spinlock, flags); dma0_status = readb(devpriv->plx9080_mmio + PLX_REG_DMACSR0); - if (plx_status & ICS_DMA0_A) { + if (plx_status & PLX_INTCSR_DMA0IA) { /* dma chan 0 interrupt */ writeb((dma0_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT, devpriv->plx9080_mmio + PLX_REG_DMACSR0); @@ -224,7 +225,7 @@ static irqreturn_t gsc_hpdi_interrupt(int irq, void *d) /* spin lock makes sure no one else changes plx dma control reg */ spin_lock_irqsave(&dev->spinlock, flags); dma1_status = readb(devpriv->plx9080_mmio + PLX_REG_DMACSR1); - if (plx_status & ICS_DMA1_A) { + if (plx_status & PLX_INTCSR_DMA1IA) { /* XXX */ /* dma chan 1 interrupt */ writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT, devpriv->plx9080_mmio + PLX_REG_DMACSR1); @@ -232,7 +233,7 @@ static irqreturn_t gsc_hpdi_interrupt(int irq, void *d) spin_unlock_irqrestore(&dev->spinlock, flags); /* clear possible plx9080 interrupt sources */ - if (plx_status & ICS_LDIA) { + if (plx_status & PLX_INTCSR_LDBIA) { /* clear local doorbell interrupt */ plx_bits = readl(devpriv->plx9080_mmio + PLX_REG_L2PDBELL); writel(plx_bits, devpriv->plx9080_mmio + PLX_REG_L2PDBELL); @@ -533,8 +534,9 @@ static int gsc_hpdi_init(struct comedi_device *dev) /* enable interrupts */ plx_intcsr_bits = - ICS_AERR | ICS_PERR | ICS_PIE | ICS_PLIE | ICS_PAIE | ICS_LIE | - ICS_DMA0_E; + PLX_INTCSR_LSEABORTEN | PLX_INTCSR_LSEPARITYEN | PLX_INTCSR_PIEN | + PLX_INTCSR_PLIEN | PLX_INTCSR_PABORTIEN | PLX_INTCSR_LIOEN | + PLX_INTCSR_DMA0IEN; writel(plx_intcsr_bits, devpriv->plx9080_mmio + PLX_REG_INTCSR); return 0; diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h index e544327fe60f..e9f1b9cc4f66 100644 --- a/drivers/staging/comedi/drivers/plx9080.h +++ b/drivers/staging/comedi/drivers/plx9080.h @@ -321,32 +321,71 @@ struct plx_dma_desc { /* Interrupt Control/Status Register */ #define PLX_REG_INTCSR 0x0068 -#define ICS_AERR 0x00000001 /* Assert LSERR on ABORT */ -#define ICS_PERR 0x00000002 /* Assert LSERR on Parity Error */ -#define ICS_SERR 0x00000004 /* Generate PCI SERR# */ -#define ICS_MBIE 0x00000008 /* mailbox interrupt enable */ -#define ICS_PIE 0x00000100 /* PCI Interrupt Enable */ -#define ICS_PDIE 0x00000200 /* PCI Doorbell Interrupt Enable */ -#define ICS_PAIE 0x00000400 /* PCI Abort Interrupt Enable */ -#define ICS_PLIE 0x00000800 /* PCI Local Int Enable */ -#define ICS_RAE 0x00001000 /* Retry Abort Enable */ -#define ICS_PDIA 0x00002000 /* PCI Doorbell Interrupt Active */ -#define ICS_PAIA 0x00004000 /* PCI Abort Interrupt Active */ -#define ICS_LIA 0x00008000 /* Local Interrupt Active */ -#define ICS_LIE 0x00010000 /* Local Interrupt Enable */ -#define ICS_LDIE 0x00020000 /* Local Doorbell Int Enable */ -#define ICS_DMA0_E 0x00040000 /* DMA #0 Interrupt Enable */ -#define ICS_DMA1_E 0x00080000 /* DMA #1 Interrupt Enable */ -#define ICS_LDIA 0x00100000 /* Local Doorbell Int Active */ -#define ICS_DMA0_A 0x00200000 /* DMA #0 Interrupt Active */ -#define ICS_DMA1_A 0x00400000 /* DMA #1 Interrupt Active */ -#define ICS_BIA 0x00800000 /* BIST Interrupt Active */ -#define ICS_TA_DM 0x01000000 /* Target Abort - Direct Master */ -#define ICS_TA_DMA0 0x02000000 /* Target Abort - DMA #0 */ -#define ICS_TA_DMA1 0x04000000 /* Target Abort - DMA #1 */ -#define ICS_TA_RA 0x08000000 /* Target Abort - Retry Timeout */ -/* mailbox x is active */ -#define ICS_MBIA(x) (0x10000000 << ((x) & 0x3)) +/* Enable Local Bus LSERR# when PCI Bus Target Abort or Master Abort occurs */ +#define PLX_INTCSR_LSEABORTEN BIT(0) +/* Enable Local Bus LSERR# when PCI parity error occurs */ +#define PLX_INTCSR_LSEPARITYEN BIT(1) +/* Generate PCI Bus SERR# when set to 1 */ +#define PLX_INTCSR_GENSERR BIT(2) +/* Mailbox Interrupt Enable (local bus interrupts on PCI write to MBOX0-3) */ +#define PLX_INTCSR_MBIEN BIT(3) +/* PCI Interrupt Enable */ +#define PLX_INTCSR_PIEN BIT(8) +/* PCI Doorbell Interrupt Enable */ +#define PLX_INTCSR_PDBIEN BIT(9) +/* PCI Abort Interrupt Enable */ +#define PLX_INTCSR_PABORTIEN BIT(10) +/* PCI Local Interrupt Enable */ +#define PLX_INTCSR_PLIEN BIT(11) +/* Retry Abort Enable (for diagnostic purposes only) */ +#define PLX_INTCSR_RAEN BIT(12) +/* PCI Doorbell Interrupt Active (read-only) */ +#define PLX_INTCSR_PDBIA BIT(13) +/* PCI Abort Interrupt Active (read-only) */ +#define PLX_INTCSR_PABORTIA BIT(14) +/* Local Interrupt (LINTi#) Active (read-only) */ +#define PLX_INTCSR_PLIA BIT(15) +/* Local Interrupt Output (LINTo#) Enable */ +#define PLX_INTCSR_LIOEN BIT(16) +/* Local Doorbell Interrupt Enable */ +#define PLX_INTCSR_LDBIEN BIT(17) +/* DMA Channel 0 Interrupt Enable */ +#define PLX_INTCSR_DMA0IEN BIT(18) +/* DMA Channel 1 Interrupt Enable */ +#define PLX_INTCSR_DMA1IEN BIT(19) +/* DMA Channel N Interrupt Enable (N <= 1) */ +#define PLX_INTCSR_DMAIEN(n) ((n) ? PLX_INTCSR_DMA1IEN : PLX_INTCSR_DMA0IEN) +/* Local Doorbell Interrupt Active (read-only) */ +#define PLX_INTCSR_LDBIA BIT(20) +/* DMA Channel 0 Interrupt Active (read-only) */ +#define PLX_INTCSR_DMA0IA BIT(21) +/* DMA Channel 1 Interrupt Active (read-only) */ +#define PLX_INTCSR_DMA1IA BIT(22) +/* DMA Channel N Interrupt Active (N <= 1) (read-only) */ +#define PLX_INTCSR_DMAIA(n) ((n) ? PLX_INTCSR_DMA1IA : PLX_INTCSR_DMA0IA) +/* BIST Interrupt Active (read-only) */ +#define PLX_INTCSR_BISTIA BIT(23) +/* Direct Master Not Bus Master During Master Or Target Abort (read-only) */ +#define PLX_INTCSR_ABNOTDM BIT(24) +/* DMA Channel 0 Not Bus Master During Master Or Target Abort (read-only) */ +#define PLX_INTCSR_ABNOTDMA0 BIT(25) +/* DMA Channel 1 Not Bus Master During Master Or Target Abort (read-only) */ +#define PLX_INTCSR_ABNOTDMA1 BIT(26) +/* DMA Channel N Not Bus Master During Master Or Target Abort (read-only) */ +#define PLX_INTCSR_ABNOTDMA(n) ((n) ? PLX_INTCSR_ABNOTDMA1 \ + : PLX_INTCSR_ABNOTDMA0) +/* Target Abort Not Generated After 256 Master Retries (read-only) */ +#define PLX_INTCSR_ABNOTRETRY BIT(27) +/* PCI Wrote Mailbox 0 (enabled if bit 3 set) (read-only) */ +#define PLX_INTCSR_MB0IA BIT(28) +/* PCI Wrote Mailbox 1 (enabled if bit 3 set) (read-only) */ +#define PLX_INTCSR_MB1IA BIT(29) +/* PCI Wrote Mailbox 2 (enabled if bit 3 set) (read-only) */ +#define PLX_INTCSR_MB2IA BIT(30) +/* PCI Wrote Mailbox 3 (enabled if bit 3 set) (read-only) */ +#define PLX_INTCSR_MB3IA BIT(31) +/* PCI Wrote Mailbox N (N <= 3) (enabled if bit 3 set) (read-only) */ +#define PLX_INTCSR_MBIA(n) BIT(28 + (n)) /* * Serial EEPROM Control, PCI Command Codes, User I/O Control, diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c index 236f6adcad6f..e00e9c6268ae 100644 --- a/drivers/staging/comedi/drivers/rtd520.c +++ b/drivers/staging/comedi/drivers/rtd520.c @@ -1316,7 +1316,8 @@ static int rtd_auto_attach(struct comedi_device *dev, devpriv->fifosz = ret; if (dev->irq) - writel(ICS_PIE | ICS_PLIE, devpriv->lcfg + PLX_REG_INTCSR); + writel(PLX_INTCSR_PIEN | PLX_INTCSR_PLIEN, + devpriv->lcfg + PLX_REG_INTCSR); return 0; } -- 2.30.2