From 9d76de977142e50753e27144d172fde068fd4936 Mon Sep 17 00:00:00 2001 From: Luka Perkov Date: Mon, 20 Apr 2015 20:47:48 +0000 Subject: [PATCH] ar71xx: add support for compex wpj344 Signed-off-by: Christian Mehlis Signed-off-by: Luka Perkov SVN-Revision: 45527 --- target/linux/ar71xx/base-files/etc/diag.sh | 3 + .../base-files/etc/uci-defaults/02_network | 7 + target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 + .../ar71xx/base-files/lib/upgrade/platform.sh | 1 + target/linux/ar71xx/config-3.18 | 1 + .../files/arch/mips/ath79/mach-wpj344.c | 177 ++++++++++++++++++ .../linux/ar71xx/generic/profiles/compex.mk | 10 + target/linux/ar71xx/image/Makefile | 3 + .../610-MIPS-ath79-openwrt-machines.patch | 26 ++- 9 files changed, 224 insertions(+), 7 deletions(-) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-wpj344.c diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 52a73ee738..a56f70ec67 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -296,6 +296,9 @@ get_status_led() { wp543) status_led="wp543:green:diag" ;; + wpj344) + status_led="wpj344:green:status" + ;; wpj558) status_led="wpj558:green:sig3" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index 9789834dcf..fa3f66f09f 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -360,6 +360,13 @@ wpe72) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; +wpj344) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0t 3" + ucidef_add_switch_vlan "switch0" "2" "0t 2" + ;; + wpj558) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index b3dbcf5891..c796224236 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -801,6 +801,9 @@ ar71xx_board_detect() { *WPE72) name="wpe72" ;; + *WPJ344) + name="wpj344" + ;; *WPJ558) name="wpj558" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 0cbee1d972..1c349fe67d 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -184,6 +184,7 @@ platform_check_image() { db120 | \ f9k1115v2 |\ hornet-ub | \ + wpj344 | \ wpj558 | \ zcn-1523h-2 | \ zcn-1523h-5) diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18 index 1ee99f479d..36b8bb6be9 100644 --- a/target/linux/ar71xx/config-3.18 +++ b/target/linux/ar71xx/config-3.18 @@ -136,6 +136,7 @@ CONFIG_ATH79_MACH_WNR2000_V4=y CONFIG_ATH79_MACH_WNR2200=y CONFIG_ATH79_MACH_WP543=y CONFIG_ATH79_MACH_WPE72=y +CONFIG_ATH79_MACH_WPJ344=y CONFIG_ATH79_MACH_WPJ558=y CONFIG_ATH79_MACH_WRT160NL=y CONFIG_ATH79_MACH_WRT400N=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj344.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj344.c new file mode 100644 index 0000000000..fd718bddbf --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj344.c @@ -0,0 +1,177 @@ +/* + * Compex WPJ344 board support + * + * Copyright (c) 2011 Qualcomm Atheros + * Copyright (c) 2011-2012 Gabor Juhos + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include +#include +#include +#include + +#include + +#include "common.h" +#include "pci.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-eth.h" +#include "dev-usb.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define WPJ344_GPIO_LED_USB 11 +#define WPJ344_GPIO_LED_WLAN_5G 12 +#define WPJ344_GPIO_LED_WLAN_2G 13 +#define WPJ344_GPIO_LED_STATUS 14 +#define WPJ344_GPIO_LED_WPS 15 + +#define WPJ344_GPIO_BTN_RESET 16 + +#define WPJ344_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WPJ344_KEYS_DEBOUNCE_INTERVAL (3 * WPJ344_KEYS_POLL_INTERVAL) + +#define WPJ344_MAC0_OFFSET 0 +#define WPJ344_MAC1_OFFSET 6 +#define WPJ344_WMAC_CALDATA_OFFSET 0x1000 +#define WPJ344_PCIE_CALDATA_OFFSET 0x5000 + +static struct gpio_led wpj344_leds_gpio[] __initdata = { + { + .name = "wpj344:green:status", + .gpio = WPJ344_GPIO_LED_STATUS, + .active_low = 1, + }, + { + .name = "wpj344:green:wps", + .gpio = WPJ344_GPIO_LED_WPS, + .active_low = 1, + }, + { + .name = "wpj344:green:wlan-5g", + .gpio = WPJ344_GPIO_LED_WLAN_5G, + .active_low = 1, + }, + { + .name = "wpj344:green:wlan-2g", + .gpio = WPJ344_GPIO_LED_WLAN_2G, + .active_low = 1, + }, + { + .name = "wpj344:green:usb", + .gpio = WPJ344_GPIO_LED_USB, + .active_low = 1, + } +}; + +static struct gpio_keys_button wpj344_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WPJ344_KEYS_DEBOUNCE_INTERVAL, + .gpio = WPJ344_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static struct ar8327_pad_cfg wpj344_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_led_cfg wpj344_ar8327_led_cfg = { + .led_ctrl0 = 0x00000000, + .led_ctrl1 = 0xc737c737, + .led_ctrl2 = 0x00000000, + .led_ctrl3 = 0x00c30c00, + .open_drain = true, +}; + +static struct ar8327_platform_data wpj344_ar8327_data = { + .pad0_cfg = &wpj344_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .led_cfg = &wpj344_ar8327_led_cfg, +}; + +static struct mdio_board_info wpj344_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &wpj344_ar8327_data, + }, +}; + +static void __init wpj344_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_gpio_output_select(WPJ344_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO); + ath79_register_m25p80(NULL); + ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj344_leds_gpio), + wpj344_leds_gpio); + ath79_register_gpio_keys_polled(-1, WPJ344_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wpj344_gpio_keys), + wpj344_gpio_keys); + + ath79_register_usb(); + + ath79_register_wmac(art + WPJ344_WMAC_CALDATA_OFFSET, NULL); + + ath79_register_pci(); + + mdiobus_register_board_info(wpj344_mdio0_info, + ARRAY_SIZE(wpj344_mdio0_info)); + + + ath79_register_mdio(1, 0x0); + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, art + WPJ344_MAC0_OFFSET, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, art + WPJ344_MAC1_OFFSET, 0); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | + AR934X_ETH_CFG_SW_ONLY_MODE); + + /* GMAC0 is connected to an AR8327 switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x06000000; + + /* GMAC1 is connected to the internal switch */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + + ath79_register_eth(0); + ath79_register_eth(1); +} + +MIPS_MACHINE(ATH79_MACH_WPJ344, "WPJ344", "Compex WPJ344", wpj344_setup); diff --git a/target/linux/ar71xx/generic/profiles/compex.mk b/target/linux/ar71xx/generic/profiles/compex.mk index d1a4f12e5e..6528d4a197 100644 --- a/target/linux/ar71xx/generic/profiles/compex.mk +++ b/target/linux/ar71xx/generic/profiles/compex.mk @@ -27,6 +27,16 @@ endef $(eval $(call Profile,WPE72)) +define Profile/WPJ344 + NAME:=Compex WPJ344 +endef + +define Profile/WPJ344/Description + Package set optimized for the Compex WPJ344 board. +endef + +$(eval $(call Profile,WPJ344)) + define Profile/WPJ558 NAME:=Compex WPJ558 endef diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 9e3bc5c763..93f05f863e 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -492,6 +492,7 @@ uap_pro_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel) ubdev_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),14080k(rootfs),192k(unknown)ro,64k(art)ro,384k(unknown2)ro,15488k@0x40000(firmware) +wpj344_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro wpj558_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1728k(kernel),6016k(rootfs),64k(nvram)ro,64k(art)ro,7744k@0x50000(firmware) wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro @@ -1364,6 +1365,7 @@ $(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH $(eval $(call SingleProfile,AthLzma,64k,PB92,pb92,PB92,ttyS0,115200,$$(pb92_mtdlayout),KRuImage)) $(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536)) $(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage)) +$(eval $(call SingleProfile,AthLzma,64k,WPJ344_16M,wpj344-16M,WPJ344,ttyS0,115200,$$(wpj344_mtdlayout_16M),KRuImage,65536)) $(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536)) $(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC)) @@ -1594,6 +1596,7 @@ $(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R)) $(eval $(call MultiProfile,WNR1000V2,REALWNR1000V2 WNR1000V2_VC)) $(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M)) $(eval $(call MultiProfile,WPE72,WPE72_4M WPE72_8M WPE72_16M)) +$(eval $(call MultiProfile,WPJ344,WPJ344_16M)) $(eval $(call MultiProfile,WPJ558,WPJ558_16M)) $(eval $(call MultiProfile,Minimal,$(SINGLE_PROFILES))) diff --git a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch index 2aca064eee..5e07d80511 100644 --- a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,22 +16,190 @@ +@@ -16,22 +16,191 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -178,6 +178,7 @@ + ATH79_MACH_WNR1000_V2, /* NETGEAR WNR1000 v2 */ + ATH79_MACH_WP543, /* Compex WP543 */ + ATH79_MACH_WPE72, /* Compex WPE72 */ ++ ATH79_MACH_WPJ344, /* Compex WPJ344 */ + ATH79_MACH_WPJ558, /* Compex WPJ558 */ + ATH79_MACH_WRT160NL, /* Linksys WRT160NL */ + ATH79_MACH_WRT400N, /* Linksys WRT400N */ @@ -264,7 +265,7 @@ config ATH79_MACH_AP121 bool "Atheros AP121 reference board" select SOC_AR933X -@@ -11,62 +75,976 @@ config ATH79_MACH_AP121 +@@ -11,62 +75,986 @@ config ATH79_MACH_AP121 select ATH79_DEV_M25P80 select ATH79_DEV_USB select ATH79_DEV_WMAC @@ -499,6 +500,16 @@ + select ATH79_DEV_USB + select MYLOADER + ++config ATH79_MACH_WPJ344 ++ bool "Compex WPJ344 board support" ++ select SOC_AS934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ +config ATH79_MACH_WPJ558 + bool "Compex WPJ558 board support" + select SOC_QCA955X @@ -1269,7 +1280,7 @@ config ATH79_MACH_UBNT_XM bool "Ubiquiti Networks XM/UniFi boards" -@@ -83,6 +1061,97 @@ config ATH79_MACH_UBNT_XM +@@ -83,6 +1071,97 @@ config ATH79_MACH_UBNT_XM Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. @@ -1367,7 +1378,7 @@ endmenu config SOC_AR71XX -@@ -124,7 +1193,10 @@ config ATH79_DEV_DSA +@@ -124,7 +1203,10 @@ config ATH79_DEV_DSA config ATH79_DEV_ETH def_bool n @@ -1379,7 +1390,7 @@ def_bool n config ATH79_DEV_GPIO_BUTTONS -@@ -154,6 +1226,11 @@ config ATH79_PCI_ATH9K_FIXUP +@@ -154,6 +1236,11 @@ config ATH79_PCI_ATH9K_FIXUP def_bool n config ATH79_ROUTERBOOT @@ -1393,7 +1404,7 @@ endif --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -38,9 +38,119 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route +@@ -38,9 +48,120 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route # # Machines # @@ -1502,7 +1513,8 @@ +obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o +obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o +obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o -+obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o ++obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o ++obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o +obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o +obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o +obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o -- 2.30.2