From 9cc8de86c922421e6f6e48e558e38e8dfd22b9f7 Mon Sep 17 00:00:00 2001 From: Dirk Brenken Date: Tue, 27 Feb 2018 14:26:18 +0100 Subject: [PATCH] travelmate: update 1.1.2 * validate input timings/ranges * fix an eap detection issue * refine re-connection handling in case of an error * refine debug logging Signed-off-by: Dirk Brenken --- net/travelmate/Makefile | 2 +- net/travelmate/files/README.md | 12 +-- net/travelmate/files/travelmate.sh | 118 ++++++++++++++++++----------- 3 files changed, 80 insertions(+), 52 deletions(-) diff --git a/net/travelmate/Makefile b/net/travelmate/Makefile index a9acf0bbdc..83297b96b3 100644 --- a/net/travelmate/Makefile +++ b/net/travelmate/Makefile @@ -6,7 +6,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=travelmate -PKG_VERSION:=1.1.1 +PKG_VERSION:=1.1.2 PKG_RELEASE:=1 PKG_LICENSE:=GPL-3.0+ PKG_MAINTAINER:=Dirk Brenken diff --git a/net/travelmate/files/README.md b/net/travelmate/files/README.md index 15accd7c83..ca9d1c6643 100644 --- a/net/travelmate/files/README.md +++ b/net/travelmate/files/README.md @@ -37,15 +37,15 @@ To avoid these kind of deadlocks, travelmate set all station interfaces in an "a * the application is located in LuCI under 'Services' menu ## Travelmate config options -* usually the pre-configured travelmate setup works quite well and no manual config overrides are needed, all listed options apply to the 'global' config section: +* usually the pre-configured travelmate setup works quite well and no manual config overrides are needed, all listed options apply to the 'global' section: * trm\_enabled => main switch to enable/disable the travelmate service (bool/default: '0', disabled) * trm\_debug => enable/disable debug logging (bool/default: '0', disabled) * trm\_automatic => keep travelmate in an active state (bool/default: '1', enabled) * trm\_captive => enable/disable the captive portal detection (bool/default: '1', enabled) - * trm\_minquality => minimum signal quality threshold as percent for conditional uplink (dis-) connections (int/default: '30') - * trm\_maxwait => how long (in seconds) should travelmate wait for a successful wlan interface reload action (int/default: '30') - * trm\_maxretry => how many times should travelmate try to connect to an uplink, '0' means unlimited retries. (int/default: '3') - * trm\_timeout => timeout in seconds for "automatic mode" (int/default: '60') + * trm\_minquality => minimum signal quality threshold as percent for conditional uplink (dis-) connections (int/default: '35', valid range: 20-80) + * trm\_maxwait => how long (in seconds) should travelmate wait for a successful wlan interface reload action (int/default: '30', valid range: 20-40) + * trm\_maxretry => how many times should travelmate try to connect to an uplink (int/default: '3', valid range: 1-10) + * trm\_timeout => timeout in seconds for "automatic mode" (int/default: '60', valid range: 30-300) * trm\_radio => limit travelmate to a dedicated radio, e.g. 'radio0' (default: not set, use all radios) * trm\_iface => main uplink / procd trigger network interface (default: trm_wwan) * trm\_triggerdelay => additional trigger delay in seconds before travelmate processing starts (int/default: '2') @@ -125,7 +125,7 @@ edit /etc/config/travelmate and set 'trm_enabled' to '1' **A:** In "trigger" mode travelmate will be triggered solely by procd interface down events, whenever an uplink disappears travelmate tries n times (default 3) to find a new uplink or reconnect to the old one. The 'automatic' mode keeps travelmate in an active state and checks every n seconds the connection status / the uplink availability regardless of procd event trigger. **Q:** What happen with misconfigured uplinks, e.g. due to outdated wlan passwords? -**A:** Travelmate tries n times (default 3) to connect, then the respective uplink SSID will be marked / renamed to '_SSID_\_err'. In this case use the builtin wireless station manager to update your wireless credentials. To disable this functionality at all set the Connection Limit ('trm\_maxretry') to '0', which means unlimited retries. +**A:** Travelmate tries n times (default 3) to connect, then the respective uplink SSID will be marked / renamed to '_SSID_\_err'. In this case use the builtin wireless station manager to update your wireless credentials. ## Support Please join the travelmate discussion in this [forum thread](https://forum.lede-project.org/t/travelmate-support-thread/5155) or contact me by [mail](mailto:dev@brenken.org) diff --git a/net/travelmate/files/travelmate.sh b/net/travelmate/files/travelmate.sh index 8a20c9111d..88ad802b35 100755 --- a/net/travelmate/files/travelmate.sh +++ b/net/travelmate/files/travelmate.sh @@ -10,7 +10,7 @@ # LC_ALL=C PATH="/usr/sbin:/usr/bin:/sbin:/bin" -trm_ver="1.1.1" +trm_ver="1.1.2" trm_sysver="unknown" trm_enabled=0 trm_debug=0 @@ -71,16 +71,31 @@ f_envload() exit 0 fi - # check eap capabilities + # validate input ranges # - trm_eap="$("${trm_wpa}" -veap >/dev/null 2>&1; printf "%u" ${?})" + if [ ${trm_minquality} -lt 20 ] || [ ${trm_minquality} -gt 80 ] + then + trm_minquality=35 + fi + if [ ${trm_maxretry} -lt 1 ] || [ ${trm_maxretry} -gt 10 ] + then + trm_maxretry=3 + fi + if [ ${trm_maxwait} -lt 20 ] || [ ${trm_maxwait} -gt 40 ] || [ ${trm_maxwait} -ge ${trm_timeout} ] + then + trm_maxwait=30 + fi + if [ ${trm_timeout} -lt 30 ] || [ ${trm_timeout} -gt 300 ] || [ ${trm_timeout} -le ${trm_maxwait} ] + then + trm_timeout=60 + fi } # gather radio information & bring down all STA interfaces # f_prep() { - local config="${1}" + local eap_rc=0 config="${1}" local mode="$(uci_get wireless "${config}" mode)" local network="$(uci_get wireless "${config}" network)" local radio="$(uci_get wireless "${config}" device)" @@ -98,19 +113,23 @@ f_prep() then uci_set wireless "${config}" disabled 1 fi - if [ -z "${eaptype}" ] || [ ${trm_eap} -eq 0 ] + if [ -n "${eaptype}" ] + then + eap_rc="$("${trm_wpa}" -veap >/dev/null 2>&1; printf "%u" ${?})" + fi + if [ -z "${eaptype}" ] || [ ${eap_rc} -eq 0 ] then trm_stalist="${trm_stalist} ${config}_${radio}" fi fi - f_log "debug" "f_prep ::: config: ${config}, mode: ${mode}, network: ${network}, radio: ${radio}, disabled: ${disabled}" + f_log "debug" "f_prep ::: config: ${config}, mode: ${mode}, network: ${network}, eap_rc: ${eap_rc}, radio: ${radio}, trm_radio: ${trm_radio:-"-"}, disabled: ${disabled}" } # check interface status # f_check() { - local ifname radio dev_status config sta_iface sta_radio sta_essid sta_bssid result cnt=1 mode="${1}" status="${2:-"false"}" IFS=" " + local ifname radio dev_status config sta_essid sta_bssid result wait=1 mode="${1}" status="${2:-"false"}" IFS=" " trm_ifquality=0 trm_ifstatus="false" @@ -118,7 +137,7 @@ f_check() then ubus call network reload fi - while [ ${cnt} -le ${trm_maxwait} ] + while [ ${wait} -le ${trm_maxwait} ] do dev_status="$(ubus -S call network.wireless status 2>/dev/null)" if [ -n "${dev_status}" ] @@ -132,26 +151,28 @@ f_check() fi for radio in ${trm_radiolist} do - status="$(printf "%s" "${dev_status}" | jsonfilter -l1 -e "@.${radio}.up")" - if [ "${status}" = "true" ] && [ -z "$(printf "%s" "${trm_devlist}" | grep -Fo " ${radio}")" ] + result="$(printf "%s" "${dev_status}" | jsonfilter -l1 -e "@.${radio}.up")" + if [ "${result}" = "true" ] && [ -z "$(printf "%s" "${trm_devlist}" | grep -Fo " ${radio}")" ] then trm_devlist="${trm_devlist} ${radio}" fi done - if [ "${trm_radiolist}" = "${trm_devlist}" ] || [ ${cnt} -eq ${trm_maxwait} ] || [ "${status}" = "false" ] + if [ "${trm_devlist}" = "${trm_radiolist}" ] || [ ${wait} -eq ${trm_maxwait} ] then ifname="${trm_devlist}" break + else + trm_devlist="" fi + elif [ "${mode}" = "rev" ] + then + wait=$((${trm_maxwait}/3)) + sleep ${wait} + break else ifname="$(printf "%s" "${dev_status}" | jsonfilter -l1 -e '@.*.interfaces[@.config.mode="sta"].ifname')" - config="$(printf "%s" "${dev_status}" | jsonfilter -l1 -e '@.*.interfaces[@.config.mode="sta"].section')" - if [ -n "${ifname}" ] && [ -n "${config}" ] + if [ -n "${ifname}" ] then - sta_iface="$(uci_get wireless "${config}" network)" - sta_radio="$(uci_get wireless "${config}" device)" - sta_essid="$(uci_get wireless "${config}" ssid)" - sta_bssid="$(uci_get wireless "${config}" bssid)" trm_ifquality="$(${trm_iwinfo} ${ifname} info 2>/dev/null | awk -F "[\/| ]" '/Link Quality:/{printf "%i\n", (100 / $NF * $(NF-1)) }')" if [ ${trm_ifquality} -ge ${trm_minquality} ] then @@ -159,6 +180,8 @@ f_check() elif [ "${mode}" = "initial" ] && [ ${trm_ifquality} -lt ${trm_minquality} ] then trm_connection="" + sta_essid="$(printf "%s" "${dev_status}" | jsonfilter -l1 -e '@.*.interfaces[@.config.mode="sta"].*.ssid')" + sta_bssid="$(printf "%s" "${dev_status}" | jsonfilter -l1 -e '@.*.interfaces[@.config.mode="sta"].*.bssid')" f_log "info" "uplink '${sta_essid:-"-"}/${sta_bssid:-"-"}' is out of range (${trm_ifquality}/${trm_minquality}), uplink disconnected (${trm_sysver})" fi fi @@ -171,47 +194,62 @@ f_check() fi if [ "${mode}" = "initial" ] && [ "${trm_captive}" -eq 1 ] && [ "${trm_ifstatus}" = "true" ] then - result="$(${trm_fetch} --timeout=1 --spider "${trm_captiveurl}" 2>&1 | awk '/^Redirected/{printf "%s" "cp \047"$NF"\047";exit}/^Download completed/{printf "%s" "net ok";exit}/^Failed/{printf "%s" "net nok";exit}')" - if ([ -n "${result}" ] && [ -z "${trm_connection}" ]) || [ "${trm_connection%/*}" != "${result}" ] + result="$(${trm_fetch} --timeout=$((${trm_maxwait}/3)) --spider "${trm_captiveurl}" 2>&1 | awk '/^Redirected/{printf "%s" "net cp \047"$NF"\047";exit}/^Download completed/{printf "%s" "net ok";exit}/^Failed|^Connection error/{printf "%s" "net nok";exit}')" + if [ -n "${result}" ] && ([ -z "${trm_connection}" ] || [ "${result}" != "${trm_connection%/*}" ]) then trm_connection="${result}/${trm_ifquality}" - f_jsnup "${sta_iface}" "${sta_radio}" "${sta_essid}" "${sta_bssid}" + f_jsnup fi fi break fi fi - cnt=$((cnt+1)) + wait=$((wait+1)) sleep 1 done - f_log "debug" "f_check::: mode: ${mode}, name: ${ifname:-"-"}, status: ${trm_ifstatus}, quality: ${trm_ifquality}, connection: ${trm_connection:-"-"}, cnt: ${cnt}, max_wait: ${trm_maxwait}, min_quality: ${trm_minquality}, captive: ${trm_captive}, automatic: ${trm_automatic}" + f_log "debug" "f_check::: mode: ${mode}, name: ${ifname:-"-"}, status: ${trm_ifstatus}, quality: ${trm_ifquality}, connection: ${trm_connection:-"-"}, wait: ${wait}, max_wait: ${trm_maxwait}, min_quality: ${trm_minquality}, captive: ${trm_captive}, automatic: ${trm_automatic}" } # update runtime information # f_jsnup() { - local status="${trm_ifstatus}" iface="${1}" radio="${2}" essid="${3}" bssid="${4}" + local config sta_iface sta_radio sta_essid sta_bssid dev_status status="${trm_ifstatus}" if [ "${status}" = "true" ] then status="connected (${trm_connection:-"-"})" elif [ "${status}" = "false" ] then + trm_connection="" status="not connected" fi + dev_status="$(ubus -S call network.wireless status 2>/dev/null)" + if [ -n "${dev_status}" ] + then + config="$(printf "%s" "${dev_status}" | jsonfilter -l1 -e '@.*.interfaces[@.config.mode="sta"].section')" + if [ -n "${config}" ] + then + sta_iface="$(uci_get wireless "${config}" network)" + sta_radio="$(uci_get wireless "${config}" device)" + sta_essid="$(uci_get wireless "${config}" ssid)" + sta_bssid="$(uci_get wireless "${config}" bssid)" + fi + fi + json_init json_add_object "data" json_add_string "travelmate_status" "${status}" json_add_string "travelmate_version" "${trm_ver}" - json_add_string "station_id" "${essid:-"-"}/${bssid:-"-"}" - json_add_string "station_interface" "${iface:-"-"}" - json_add_string "station_radio" "${radio:-"-"}" + json_add_string "station_id" "${sta_essid:-"-"}/${sta_bssid:-"-"}" + json_add_string "station_interface" "${sta_iface:-"-"}" + json_add_string "station_radio" "${sta_radio:-"-"}" json_add_string "last_rundate" "$(/bin/date "+%d.%m.%Y %H:%M:%S")" json_add_string "system" "${trm_sysver}" json_close_object json_dump > "${trm_rtfile}" + f_log "debug" "f_jsnup::: config: ${config:-"-"}, status: ${status:-"-"}, sta_iface: ${sta_iface:-"-"}, sta_radio: ${sta_radio:-"-"}, sta_essid: ${sta_essid:-"-"}, sta_bssid: ${sta_bssid:-"-"}" } # write to syslog @@ -247,7 +285,7 @@ f_main() config_foreach f_prep wifi-iface uci_commit wireless f_check "dev" "running" - f_log "debug" "f_main ::: iwinfo: ${trm_iwinfo}, eap_rc: ${trm_eap}, dev_list: ${trm_devlist}, sta_list: ${trm_stalist:0:800}" + f_log "debug" "f_main ::: iwinfo: ${trm_iwinfo}, dev_list: ${trm_devlist}, sta_list: ${trm_stalist:0:800}" for dev in ${trm_devlist} do if [ -z "$(printf "%s" "${trm_stalist}" | grep -Fo "_${dev}")" ] @@ -288,6 +326,7 @@ f_main() if (([ "${scan_essid}" = "\"${sta_essid}\"" ] && ([ -z "${sta_bssid}" ] || [ "${scan_bssid}" = "${sta_bssid}" ])) || \ ([ "${scan_bssid}" = "${sta_bssid}" ] && [ "${scan_essid}" = "unknown" ])) && [ "${dev}" = "${sta_radio}" ] then + f_log "debug" "f_main ::: scan_quality: ${scan_quality}, scan_bssid: ${scan_bssid}, scan_essid: ${scan_essid}" uci_set wireless "${config}" disabled 0 f_check "sta" if [ "${trm_ifstatus}" = "true" ] @@ -296,7 +335,7 @@ f_main() f_log "info" "interface '${sta_iface}' on '${sta_radio}' connected to uplink '${sta_essid:-"-"}/${sta_bssid:-"-"}' (${trm_sysver})" f_check "initial" return 0 - elif [ ${trm_maxretry} -ne 0 ] && [ ${cnt} -eq ${trm_maxretry} ] + elif [ ${cnt} -eq ${trm_maxretry} ] then uci_set wireless "${config}" disabled 1 if [ -n "${sta_essid}" ] @@ -309,15 +348,11 @@ f_main() fi uci_commit wireless f_log "info" "can't connect to uplink '${sta_essid:-"-"}/${sta_bssid:-"-"}', uplink disabled (${trm_sysver})" - f_check "dev" + f_check "rev" else - if [ ${trm_maxretry} -eq 0 ] - then - cnt=0 - fi uci -q revert wireless f_log "info" "can't connect to uplink '${sta_essid:-"-"}/${sta_bssid:-"-"}' (${trm_sysver})" - f_check "dev" + f_check "rev" fi fi fi @@ -330,7 +365,7 @@ f_main() done fi cnt=$((cnt+1)) - sleep 5 + sleep $((${trm_maxwait}/6)) done done if [ ! -s "${trm_rtfile}" ] @@ -338,16 +373,9 @@ f_main() trm_ifstatus="false" f_jsnup fi - else - if [ ! -s "${trm_rtfile}" ] - then - config="$(ubus -S call network.wireless status | jsonfilter -l1 -e '@.*.interfaces[@.config.mode="sta"].section')" - sta_radio="$(uci_get wireless "${config}" device)" - sta_essid="$(uci_get wireless "${config}" ssid)" - sta_bssid="$(uci_get wireless "${config}" bssid)" - sta_iface="$(uci_get wireless "${config}" network)" - f_jsnup "${sta_iface}" "${sta_radio}" "${sta_essid}" "${sta_bssid}" - fi + elif [ ! -s "${trm_rtfile}" ] + then + f_jsnup fi } -- 2.30.2