From 9c94d3b326ad14f9a64ccdf2ec1edf0af2595d0b Mon Sep 17 00:00:00 2001 From: Soby Mathew Date: Mon, 8 Aug 2016 12:38:52 +0100 Subject: [PATCH] Move console drivers to AArch64 folder This patch moves the various assembly console drivers into `aarch64` architecture specific folder. Stub files, which include files from new location, are retained at the original location for platform compatibility reasons. Change-Id: I0069b6c1c0489ca47f5204d4e26e3bc3def533a8 --- drivers/arm/pl011/aarch64/pl011_console.S | 153 +++++++++++++++++++ drivers/arm/pl011/pl011_console.S | 126 +--------------- drivers/cadence/uart/aarch64/cdns_console.S | 127 ++++++++++++++++ drivers/cadence/uart/cdns_console.S | 100 +------------ drivers/console/aarch64/console.S | 113 ++++++++++++++ drivers/console/aarch64/skeleton_console.S | 106 +++++++++++++ drivers/console/console.S | 88 +---------- drivers/console/skeleton_console.S | 81 +--------- drivers/ti/uart/16550_console.S | 130 +--------------- drivers/ti/uart/aarch64/16550_console.S | 155 ++++++++++++++++++++ 10 files changed, 672 insertions(+), 507 deletions(-) create mode 100644 drivers/arm/pl011/aarch64/pl011_console.S create mode 100644 drivers/cadence/uart/aarch64/cdns_console.S create mode 100644 drivers/console/aarch64/console.S create mode 100644 drivers/console/aarch64/skeleton_console.S create mode 100644 drivers/ti/uart/aarch64/16550_console.S diff --git a/drivers/arm/pl011/aarch64/pl011_console.S b/drivers/arm/pl011/aarch64/pl011_console.S new file mode 100644 index 00000000..11e3df77 --- /dev/null +++ b/drivers/arm/pl011/aarch64/pl011_console.S @@ -0,0 +1,153 @@ +/* + * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ +#include +#include +#include + +/* + * Pull in generic functions to provide backwards compatibility for + * platform makefiles + */ +#include "../../../console/aarch64/console.S" + + + .globl console_core_init + .globl console_core_putc + .globl console_core_getc + + + /* ----------------------------------------------- + * int console_core_init(uintptr_t base_addr, + * unsigned int uart_clk, unsigned int baud_rate) + * Function to initialize the console without a + * C Runtime to print debug information. This + * function will be accessed by console_init and + * crash reporting. + * In: x0 - console base address + * w1 - Uart clock in Hz + * w2 - Baud rate + * Out: return 1 on success else 0 on error + * Clobber list : x1, x2, x3, x4 + * ----------------------------------------------- + */ +func console_core_init + /* Check the input base address */ + cbz x0, core_init_fail +#if !PL011_GENERIC_UART + /* Check baud rate and uart clock for sanity */ + cbz w1, core_init_fail + cbz w2, core_init_fail + /* Disable uart before programming */ + ldr w3, [x0, #UARTCR] + mov w4, #PL011_UARTCR_UARTEN + bic w3, w3, w4 + str w3, [x0, #UARTCR] + /* Program the baudrate */ + /* Divisor = (Uart clock * 4) / baudrate */ + lsl w1, w1, #2 + udiv w2, w1, w2 + /* IBRD = Divisor >> 6 */ + lsr w1, w2, #6 + /* Write the IBRD */ + str w1, [x0, #UARTIBRD] + /* FBRD = Divisor & 0x3F */ + and w1, w2, #0x3f + /* Write the FBRD */ + str w1, [x0, #UARTFBRD] + mov w1, #PL011_LINE_CONTROL + str w1, [x0, #UARTLCR_H] + /* Clear any pending errors */ + str wzr, [x0, #UARTECR] + /* Enable tx, rx, and uart overall */ + mov w1, #(PL011_UARTCR_RXE | PL011_UARTCR_TXE | PL011_UARTCR_UARTEN) + str w1, [x0, #UARTCR] +#endif + mov w0, #1 + ret +core_init_fail: + mov w0, wzr + ret +endfunc console_core_init + + /* -------------------------------------------------------- + * int console_core_putc(int c, uintptr_t base_addr) + * Function to output a character over the console. It + * returns the character printed on success or -1 on error. + * In : w0 - character to be printed + * x1 - console base address + * Out : return -1 on error else return character. + * Clobber list : x2 + * -------------------------------------------------------- + */ +func console_core_putc + /* Check the input parameter */ + cbz x1, putc_error + /* Prepend '\r' to '\n' */ + cmp w0, #0xA + b.ne 2f +1: + /* Check if the transmit FIFO is full */ + ldr w2, [x1, #UARTFR] + tbnz w2, #PL011_UARTFR_TXFF_BIT, 1b + mov w2, #0xD + str w2, [x1, #UARTDR] +2: + /* Check if the transmit FIFO is full */ + ldr w2, [x1, #UARTFR] + tbnz w2, #PL011_UARTFR_TXFF_BIT, 2b + str w0, [x1, #UARTDR] + ret +putc_error: + mov w0, #-1 + ret +endfunc console_core_putc + + /* --------------------------------------------- + * int console_core_getc(uintptr_t base_addr) + * Function to get a character from the console. + * It returns the character grabbed on success + * or -1 on error. + * In : x0 - console base address + * Clobber list : x0, x1 + * --------------------------------------------- + */ +func console_core_getc + cbz x0, getc_error +1: + /* Check if the receive FIFO is empty */ + ldr w1, [x0, #UARTFR] + tbnz w1, #PL011_UARTFR_RXFE_BIT, 1b + ldr w1, [x0, #UARTDR] + mov w0, w1 + ret +getc_error: + mov w0, #-1 + ret +endfunc console_core_getc diff --git a/drivers/arm/pl011/pl011_console.S b/drivers/arm/pl011/pl011_console.S index 5e97e911..44aafc2d 100644 --- a/drivers/arm/pl011/pl011_console.S +++ b/drivers/arm/pl011/pl011_console.S @@ -1,5 +1,5 @@ /* - * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved. + * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -27,127 +27,7 @@ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ -#include -#include -#include -/* - * Pull in generic functions to provide backwards compatibility for - * platform makefiles - */ -#include "../../console/console.S" - - - .globl console_core_init - .globl console_core_putc - .globl console_core_getc - - - /* ----------------------------------------------- - * int console_core_init(uintptr_t base_addr, - * unsigned int uart_clk, unsigned int baud_rate) - * Function to initialize the console without a - * C Runtime to print debug information. This - * function will be accessed by console_init and - * crash reporting. - * In: x0 - console base address - * w1 - Uart clock in Hz - * w2 - Baud rate - * Out: return 1 on success else 0 on error - * Clobber list : x1, x2, x3, x4 - * ----------------------------------------------- - */ -func console_core_init - /* Check the input base address */ - cbz x0, core_init_fail -#if !PL011_GENERIC_UART - /* Check baud rate and uart clock for sanity */ - cbz w1, core_init_fail - cbz w2, core_init_fail - /* Disable uart before programming */ - ldr w3, [x0, #UARTCR] - mov w4, #PL011_UARTCR_UARTEN - bic w3, w3, w4 - str w3, [x0, #UARTCR] - /* Program the baudrate */ - /* Divisor = (Uart clock * 4) / baudrate */ - lsl w1, w1, #2 - udiv w2, w1, w2 - /* IBRD = Divisor >> 6 */ - lsr w1, w2, #6 - /* Write the IBRD */ - str w1, [x0, #UARTIBRD] - /* FBRD = Divisor & 0x3F */ - and w1, w2, #0x3f - /* Write the FBRD */ - str w1, [x0, #UARTFBRD] - mov w1, #PL011_LINE_CONTROL - str w1, [x0, #UARTLCR_H] - /* Clear any pending errors */ - str wzr, [x0, #UARTECR] - /* Enable tx, rx, and uart overall */ - mov w1, #(PL011_UARTCR_RXE | PL011_UARTCR_TXE | PL011_UARTCR_UARTEN) - str w1, [x0, #UARTCR] +#if !ERROR_DEPRECATED +#include "./aarch64/pl011_console.S" #endif - mov w0, #1 - ret -core_init_fail: - mov w0, wzr - ret -endfunc console_core_init - - /* -------------------------------------------------------- - * int console_core_putc(int c, uintptr_t base_addr) - * Function to output a character over the console. It - * returns the character printed on success or -1 on error. - * In : w0 - character to be printed - * x1 - console base address - * Out : return -1 on error else return character. - * Clobber list : x2 - * -------------------------------------------------------- - */ -func console_core_putc - /* Check the input parameter */ - cbz x1, putc_error - /* Prepend '\r' to '\n' */ - cmp w0, #0xA - b.ne 2f -1: - /* Check if the transmit FIFO is full */ - ldr w2, [x1, #UARTFR] - tbnz w2, #PL011_UARTFR_TXFF_BIT, 1b - mov w2, #0xD - str w2, [x1, #UARTDR] -2: - /* Check if the transmit FIFO is full */ - ldr w2, [x1, #UARTFR] - tbnz w2, #PL011_UARTFR_TXFF_BIT, 2b - str w0, [x1, #UARTDR] - ret -putc_error: - mov w0, #-1 - ret -endfunc console_core_putc - - /* --------------------------------------------- - * int console_core_getc(uintptr_t base_addr) - * Function to get a character from the console. - * It returns the character grabbed on success - * or -1 on error. - * In : x0 - console base address - * Clobber list : x0, x1 - * --------------------------------------------- - */ -func console_core_getc - cbz x0, getc_error -1: - /* Check if the receive FIFO is empty */ - ldr w1, [x0, #UARTFR] - tbnz w1, #PL011_UARTFR_RXFE_BIT, 1b - ldr w1, [x0, #UARTDR] - mov w0, w1 - ret -getc_error: - mov w0, #-1 - ret -endfunc console_core_getc diff --git a/drivers/cadence/uart/aarch64/cdns_console.S b/drivers/cadence/uart/aarch64/cdns_console.S new file mode 100644 index 00000000..2c7960d8 --- /dev/null +++ b/drivers/cadence/uart/aarch64/cdns_console.S @@ -0,0 +1,127 @@ +/* + * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ +#include +#include +#include + + .globl console_core_init + .globl console_core_putc + .globl console_core_getc + + /* ----------------------------------------------- + * int console_core_init(unsigned long base_addr, + * unsigned int uart_clk, unsigned int baud_rate) + * Function to initialize the console without a + * C Runtime to print debug information. This + * function will be accessed by console_init and + * crash reporting. + * We assume that the bootloader already set up + * the HW (baud, ...) and only enable the trans- + * mitter and receiver here. + * In: x0 - console base address + * w1 - Uart clock in Hz + * w2 - Baud rate + * Out: return 1 on success else 0 on error + * Clobber list : x1, x2, x3 + * ----------------------------------------------- + */ +func console_core_init + /* Check the input base address */ + cbz x0, core_init_fail + /* Check baud rate and uart clock for sanity */ + cbz w1, core_init_fail + cbz w2, core_init_fail + + /* RX/TX enabled & reset */ + mov w3, #(R_UART_CR_TX_EN | R_UART_CR_RX_EN | R_UART_CR_TXRST | R_UART_CR_RXRST) + str w3, [x0, #R_UART_CR] + + mov w0, #1 + ret +core_init_fail: + mov w0, wzr + ret +endfunc console_core_init + + /* -------------------------------------------------------- + * int console_core_putc(int c, unsigned long base_addr) + * Function to output a character over the console. It + * returns the character printed on success or -1 on error. + * In : w0 - character to be printed + * x1 - console base address + * Out : return -1 on error else return character. + * Clobber list : x2 + * -------------------------------------------------------- + */ +func console_core_putc + /* Check the input parameter */ + cbz x1, putc_error + /* Prepend '\r' to '\n' */ + cmp w0, #0xA + b.ne 2f +1: + /* Check if the transmit FIFO is full */ + ldr w2, [x1, #R_UART_SR] + tbnz w2, #UART_SR_INTR_TFUL_BIT, 1b + mov w2, #0xD + str w2, [x1, #R_UART_TX] +2: + /* Check if the transmit FIFO is full */ + ldr w2, [x1, #R_UART_SR] + tbnz w2, #UART_SR_INTR_TFUL_BIT, 2b + str w0, [x1, #R_UART_TX] + ret +putc_error: + mov w0, #-1 + ret +endfunc console_core_putc + + /* --------------------------------------------- + * int console_core_getc(unsigned long base_addr) + * Function to get a character from the console. + * It returns the character grabbed on success + * or -1 on error. + * In : x0 - console base address + * Clobber list : x0, x1 + * --------------------------------------------- + */ +func console_core_getc + cbz x0, getc_error +1: + /* Check if the receive FIFO is empty */ + ldr w1, [x0, #R_UART_SR] + tbnz w1, #UART_SR_INTR_REMPTY_BIT, 1b + ldr w1, [x0, #R_UART_RX] + mov w0, w1 + ret +getc_error: + mov w0, #-1 + ret +endfunc console_core_getc diff --git a/drivers/cadence/uart/cdns_console.S b/drivers/cadence/uart/cdns_console.S index 2c7960d8..f7278387 100644 --- a/drivers/cadence/uart/cdns_console.S +++ b/drivers/cadence/uart/cdns_console.S @@ -27,101 +27,7 @@ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ -#include -#include -#include - .globl console_core_init - .globl console_core_putc - .globl console_core_getc - - /* ----------------------------------------------- - * int console_core_init(unsigned long base_addr, - * unsigned int uart_clk, unsigned int baud_rate) - * Function to initialize the console without a - * C Runtime to print debug information. This - * function will be accessed by console_init and - * crash reporting. - * We assume that the bootloader already set up - * the HW (baud, ...) and only enable the trans- - * mitter and receiver here. - * In: x0 - console base address - * w1 - Uart clock in Hz - * w2 - Baud rate - * Out: return 1 on success else 0 on error - * Clobber list : x1, x2, x3 - * ----------------------------------------------- - */ -func console_core_init - /* Check the input base address */ - cbz x0, core_init_fail - /* Check baud rate and uart clock for sanity */ - cbz w1, core_init_fail - cbz w2, core_init_fail - - /* RX/TX enabled & reset */ - mov w3, #(R_UART_CR_TX_EN | R_UART_CR_RX_EN | R_UART_CR_TXRST | R_UART_CR_RXRST) - str w3, [x0, #R_UART_CR] - - mov w0, #1 - ret -core_init_fail: - mov w0, wzr - ret -endfunc console_core_init - - /* -------------------------------------------------------- - * int console_core_putc(int c, unsigned long base_addr) - * Function to output a character over the console. It - * returns the character printed on success or -1 on error. - * In : w0 - character to be printed - * x1 - console base address - * Out : return -1 on error else return character. - * Clobber list : x2 - * -------------------------------------------------------- - */ -func console_core_putc - /* Check the input parameter */ - cbz x1, putc_error - /* Prepend '\r' to '\n' */ - cmp w0, #0xA - b.ne 2f -1: - /* Check if the transmit FIFO is full */ - ldr w2, [x1, #R_UART_SR] - tbnz w2, #UART_SR_INTR_TFUL_BIT, 1b - mov w2, #0xD - str w2, [x1, #R_UART_TX] -2: - /* Check if the transmit FIFO is full */ - ldr w2, [x1, #R_UART_SR] - tbnz w2, #UART_SR_INTR_TFUL_BIT, 2b - str w0, [x1, #R_UART_TX] - ret -putc_error: - mov w0, #-1 - ret -endfunc console_core_putc - - /* --------------------------------------------- - * int console_core_getc(unsigned long base_addr) - * Function to get a character from the console. - * It returns the character grabbed on success - * or -1 on error. - * In : x0 - console base address - * Clobber list : x0, x1 - * --------------------------------------------- - */ -func console_core_getc - cbz x0, getc_error -1: - /* Check if the receive FIFO is empty */ - ldr w1, [x0, #R_UART_SR] - tbnz w1, #UART_SR_INTR_REMPTY_BIT, 1b - ldr w1, [x0, #R_UART_RX] - mov w0, w1 - ret -getc_error: - mov w0, #-1 - ret -endfunc console_core_getc +#if !ERROR_DEPRECATED +#include "./aarch64/cdns_console.S" +#endif diff --git a/drivers/console/aarch64/console.S b/drivers/console/aarch64/console.S new file mode 100644 index 00000000..bdd5f4c3 --- /dev/null +++ b/drivers/console/aarch64/console.S @@ -0,0 +1,113 @@ +/* + * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ +#include + + .globl console_init + .globl console_uninit + .globl console_putc + .globl console_getc + + /* + * The console base is in the data section and not in .bss + * even though it is zero-init. In particular, this allows + * the console functions to start using this variable before + * the runtime memory is initialized for images which do not + * need to copy the .data section from ROM to RAM. + */ +.section .data.console_base ; .align 3 + console_base: .quad 0x0 + + /* ----------------------------------------------- + * int console_init(uintptr_t base_addr, + * unsigned int uart_clk, unsigned int baud_rate) + * Function to initialize the console without a + * C Runtime to print debug information. It saves + * the console base to the data section. + * In: x0 - console base address + * w1 - Uart clock in Hz + * w2 - Baud rate + * out: return 1 on success else 0 on error + * Clobber list : x1 - x4 + * ----------------------------------------------- + */ +func console_init + /* Check the input base address */ + cbz x0, init_fail + adrp x3, console_base + str x0, [x3, :lo12:console_base] + b console_core_init +init_fail: + ret +endfunc console_init + + /* ----------------------------------------------- + * void console_uninit(void) + * Function to finish the use of console driver. + * It sets the console_base as NULL so that any + * further invocation of `console_putc` or + * `console_getc` APIs would return error. + * ----------------------------------------------- + */ +func console_uninit + mov x0, #0 + adrp x3, console_base + str x0, [x3, :lo12:console_base] + ret +endfunc console_uninit + + /* --------------------------------------------- + * int console_putc(int c) + * Function to output a character over the + * console. It returns the character printed on + * success or -1 on error. + * In : x0 - character to be printed + * Out : return -1 on error else return character. + * Clobber list : x1, x2 + * --------------------------------------------- + */ +func console_putc + adrp x2, console_base + ldr x1, [x2, :lo12:console_base] + b console_core_putc +endfunc console_putc + + /* --------------------------------------------- + * int console_getc(void) + * Function to get a character from the console. + * It returns the character grabbed on success + * or -1 on error. + * Clobber list : x0, x1 + * --------------------------------------------- + */ +func console_getc + adrp x1, console_base + ldr x0, [x1, :lo12:console_base] + b console_core_getc +endfunc console_getc diff --git a/drivers/console/aarch64/skeleton_console.S b/drivers/console/aarch64/skeleton_console.S new file mode 100644 index 00000000..1583ee7d --- /dev/null +++ b/drivers/console/aarch64/skeleton_console.S @@ -0,0 +1,106 @@ +/* + * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ +#include + + /* + * This file contains a skeleton console implementation that can + * be used as basis for a real console implementation by platforms + * that do not contain PL011 hardware. + */ + + .globl console_core_init + .globl console_core_putc + .globl console_core_getc + + /* ----------------------------------------------- + * int console_core_init(uintptr_t base_addr, + * unsigned int uart_clk, unsigned int baud_rate) + * Function to initialize the console without a + * C Runtime to print debug information. This + * function will be accessed by console_init and + * crash reporting. + * In: x0 - console base address + * w1 - Uart clock in Hz + * w2 - Baud rate + * Out: return 1 on success else 0 on error + * Clobber list : x1, x2 + * ----------------------------------------------- + */ +func console_core_init + /* Check the input base address */ + cbz x0, core_init_fail + /* Check baud rate and uart clock for sanity */ + cbz w1, core_init_fail + cbz w2, core_init_fail + /* Insert implementation here */ + mov w0, #1 + ret +core_init_fail: + mov w0, wzr + ret +endfunc console_core_init + + /* -------------------------------------------------------- + * int console_core_putc(int c, uintptr_t base_addr) + * Function to output a character over the console. It + * returns the character printed on success or -1 on error. + * In : w0 - character to be printed + * x1 - console base address + * Out : return -1 on error else return character. + * Clobber list : x2 + * -------------------------------------------------------- + */ +func console_core_putc + /* Check the input parameter */ + cbz x1, putc_error + /* Insert implementation here */ + ret +putc_error: + mov w0, #-1 + ret +endfunc console_core_putc + + /* --------------------------------------------- + * int console_core_getc(uintptr_t base_addr) + * Function to get a character from the console. + * It returns the character grabbed on success + * or -1 on error. + * In : x0 - console base address + * Clobber list : x0, x1 + * --------------------------------------------- + */ +func console_core_getc + cbz x0, getc_error + /* Insert implementation here */ + ret +getc_error: + mov w0, #-1 + ret +endfunc console_core_getc diff --git a/drivers/console/console.S b/drivers/console/console.S index 797b5645..e8612985 100644 --- a/drivers/console/console.S +++ b/drivers/console/console.S @@ -1,5 +1,5 @@ /* - * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved. + * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -27,87 +27,7 @@ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ -#include - .globl console_init - .globl console_uninit - .globl console_putc - .globl console_getc - - /* - * The console base is in the data section and not in .bss - * even though it is zero-init. In particular, this allows - * the console functions to start using this variable before - * the runtime memory is initialized for images which do not - * need to copy the .data section from ROM to RAM. - */ -.section .data.console_base ; .align 3 - console_base: .quad 0x0 - - /* ----------------------------------------------- - * int console_init(uintptr_t base_addr, - * unsigned int uart_clk, unsigned int baud_rate) - * Function to initialize the console without a - * C Runtime to print debug information. It saves - * the console base to the data section. - * In: x0 - console base address - * w1 - Uart clock in Hz - * w2 - Baud rate - * out: return 1 on success else 0 on error - * Clobber list : x1 - x4 - * ----------------------------------------------- - */ -func console_init - /* Check the input base address */ - cbz x0, init_fail - adrp x3, console_base - str x0, [x3, :lo12:console_base] - b console_core_init -init_fail: - ret -endfunc console_init - - /* ----------------------------------------------- - * void console_uninit(void) - * Function to finish the use of console driver. - * It sets the console_base as NULL so that any - * further invocation of `console_putc` or - * `console_getc` APIs would return error. - * ----------------------------------------------- - */ -func console_uninit - mov x0, #0 - adrp x3, console_base - str x0, [x3, :lo12:console_base] - ret -endfunc console_uninit - - /* --------------------------------------------- - * int console_putc(int c) - * Function to output a character over the - * console. It returns the character printed on - * success or -1 on error. - * In : x0 - character to be printed - * Out : return -1 on error else return character. - * Clobber list : x1, x2 - * --------------------------------------------- - */ -func console_putc - adrp x2, console_base - ldr x1, [x2, :lo12:console_base] - b console_core_putc -endfunc console_putc - - /* --------------------------------------------- - * int console_getc(void) - * Function to get a character from the console. - * It returns the character grabbed on success - * or -1 on error. - * Clobber list : x0, x1 - * --------------------------------------------- - */ -func console_getc - adrp x1, console_base - ldr x0, [x1, :lo12:console_base] - b console_core_getc -endfunc console_getc +#if !ERROR_DEPRECATED +#include "./aarch64/console.S" +#endif diff --git a/drivers/console/skeleton_console.S b/drivers/console/skeleton_console.S index 083d3c70..ddfd8348 100644 --- a/drivers/console/skeleton_console.S +++ b/drivers/console/skeleton_console.S @@ -1,5 +1,5 @@ /* - * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved. + * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -27,80 +27,7 @@ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ -#include - /* - * This file contains a skeleton console implementation that can - * be used as basis for a real console implementation by platforms - * that do not contain PL011 hardware. - */ - - .globl console_core_init - .globl console_core_putc - .globl console_core_getc - - /* ----------------------------------------------- - * int console_core_init(uintptr_t base_addr, - * unsigned int uart_clk, unsigned int baud_rate) - * Function to initialize the console without a - * C Runtime to print debug information. This - * function will be accessed by console_init and - * crash reporting. - * In: x0 - console base address - * w1 - Uart clock in Hz - * w2 - Baud rate - * Out: return 1 on success else 0 on error - * Clobber list : x1, x2 - * ----------------------------------------------- - */ -func console_core_init - /* Check the input base address */ - cbz x0, core_init_fail - /* Check baud rate and uart clock for sanity */ - cbz w1, core_init_fail - cbz w2, core_init_fail - /* Insert implementation here */ - mov w0, #1 - ret -core_init_fail: - mov w0, wzr - ret -endfunc console_core_init - - /* -------------------------------------------------------- - * int console_core_putc(int c, uintptr_t base_addr) - * Function to output a character over the console. It - * returns the character printed on success or -1 on error. - * In : w0 - character to be printed - * x1 - console base address - * Out : return -1 on error else return character. - * Clobber list : x2 - * -------------------------------------------------------- - */ -func console_core_putc - /* Check the input parameter */ - cbz x1, putc_error - /* Insert implementation here */ - ret -putc_error: - mov w0, #-1 - ret -endfunc console_core_putc - - /* --------------------------------------------- - * int console_core_getc(uintptr_t base_addr) - * Function to get a character from the console. - * It returns the character grabbed on success - * or -1 on error. - * In : x0 - console base address - * Clobber list : x0, x1 - * --------------------------------------------- - */ -func console_core_getc - cbz x0, getc_error - /* Insert implementation here */ - ret -getc_error: - mov w0, #-1 - ret -endfunc console_core_getc +#if !ERROR_DEPRECATED +#include "./aarch64/skeleton_console.S" +#endif diff --git a/drivers/ti/uart/16550_console.S b/drivers/ti/uart/16550_console.S index ebb46151..90b12e5f 100644 --- a/drivers/ti/uart/16550_console.S +++ b/drivers/ti/uart/16550_console.S @@ -1,5 +1,5 @@ /* - * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved. + * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -28,128 +28,6 @@ * POSSIBILITY OF SUCH DAMAGE. */ -#include -#include -#include - - .globl console_core_init - .globl console_core_putc - .globl console_core_getc - - /* ----------------------------------------------- - * int console_core_init(unsigned long base_addr, - * unsigned int uart_clk, unsigned int baud_rate) - * Function to initialize the console without a - * C Runtime to print debug information. This - * function will be accessed by console_init and - * crash reporting. - * In: x0 - console base address - * w1 - Uart clock in Hz - * w2 - Baud rate - * Out: return 1 on success - * Clobber list : x1, x2, x3 - * ----------------------------------------------- - */ -func console_core_init - /* Check the input base address */ - cbz x0, init_fail - /* Check baud rate and uart clock for sanity */ - cbz w1, init_fail - cbz w2, init_fail - - /* Program the baudrate */ - /* Divisor = Uart clock / (16 * baudrate) */ - lsl w2, w2, #4 - udiv w2, w1, w2 - and w1, w2, #0xff /* w1 = DLL */ - lsr w2, w2, #8 - and w2, w2, #0xff /* w2 = DLLM */ - ldr w3, [x0, #UARTLCR] - orr w3, w3, #UARTLCR_DLAB - str w3, [x0, #UARTLCR] /* enable DLL, DLLM programming */ - str w1, [x0, #UARTDLL] /* program DLL */ - str w2, [x0, #UARTDLLM] /* program DLLM */ - mov w2, #~UARTLCR_DLAB - and w3, w3, w2 - str w3, [x0, #UARTLCR] /* disable DLL, DLLM programming */ - - /* 8n1 */ - mov w3, #3 - str w3, [x0, #UARTLCR] - /* no interrupt */ - mov w3, #0 - str w3, [x0, #UARTIER] - /* enable fifo, DMA */ - mov w3, #(UARTFCR_FIFOEN | UARTFCR_DMAEN) - str w3, [x0, #UARTFCR] - /* DTR + RTS */ - mov w3, #3 - str w3, [x0, #UARTMCR] - mov w0, #1 -init_fail: - ret -endfunc console_core_init - - /* -------------------------------------------------------- - * int console_core_putc(int c, unsigned int base_addr) - * Function to output a character over the console. It - * returns the character printed on success or -1 on error. - * In : w0 - character to be printed - * x1 - console base address - * Out : return -1 on error else return character. - * Clobber list : x2 - * -------------------------------------------------------- - */ -func console_core_putc - /* Check the input parameter */ - cbz x1, putc_error - - /* Prepend '\r' to '\n' */ - cmp w0, #0xA - b.ne 2f - /* Check if the transmit FIFO is full */ -1: ldr w2, [x1, #UARTLSR] - and w2, w2, #(UARTLSR_TEMT | UARTLSR_THRE) - cmp w2, #(UARTLSR_TEMT | UARTLSR_THRE) - b.ne 1b - mov w2, #0xD /* '\r' */ - str w2, [x1, #UARTTX] - ldr w2, [x1, #UARTFCR] - orr w2, w2, #UARTFCR_TXCLR - str w2, [x1, #UARTFCR] - - /* Check if the transmit FIFO is full */ -2: ldr w2, [x1, #UARTLSR] - and w2, w2, #(UARTLSR_TEMT | UARTLSR_THRE) - cmp w2, #(UARTLSR_TEMT | UARTLSR_THRE) - b.ne 2b - str w0, [x1, #UARTTX] - ldr w2, [x1, #UARTFCR] - orr w2, w2, #UARTFCR_TXCLR - str w2, [x1, #UARTFCR] - ret -putc_error: - mov w0, #-1 - ret -endfunc console_core_putc - - /* --------------------------------------------- - * int console_core_getc(void) - * Function to get a character from the console. - * It returns the character grabbed on success - * or -1 on error. - * In : w0 - console base address - * Out : return -1 on error else return character. - * Clobber list : x0, x1 - * --------------------------------------------- - */ -func console_core_getc - /* Check if the receive FIFO is empty */ -1: ldr w1, [x0, #UARTLSR] - tbz w1, #UARTLSR_RDR, 1b - ldr w0, [x0, #UARTRX] - ret -getc_error: - mov w0, #-1 - ret -endfunc console_core_getc +#if !ERROR_DEPRECATED +#include "./aarch64/16550_console.S" +#endif diff --git a/drivers/ti/uart/aarch64/16550_console.S b/drivers/ti/uart/aarch64/16550_console.S new file mode 100644 index 00000000..05353814 --- /dev/null +++ b/drivers/ti/uart/aarch64/16550_console.S @@ -0,0 +1,155 @@ +/* + * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include + + .globl console_core_init + .globl console_core_putc + .globl console_core_getc + + /* ----------------------------------------------- + * int console_core_init(unsigned long base_addr, + * unsigned int uart_clk, unsigned int baud_rate) + * Function to initialize the console without a + * C Runtime to print debug information. This + * function will be accessed by console_init and + * crash reporting. + * In: x0 - console base address + * w1 - Uart clock in Hz + * w2 - Baud rate + * Out: return 1 on success + * Clobber list : x1, x2, x3 + * ----------------------------------------------- + */ +func console_core_init + /* Check the input base address */ + cbz x0, init_fail + /* Check baud rate and uart clock for sanity */ + cbz w1, init_fail + cbz w2, init_fail + + /* Program the baudrate */ + /* Divisor = Uart clock / (16 * baudrate) */ + lsl w2, w2, #4 + udiv w2, w1, w2 + and w1, w2, #0xff /* w1 = DLL */ + lsr w2, w2, #8 + and w2, w2, #0xff /* w2 = DLLM */ + ldr w3, [x0, #UARTLCR] + orr w3, w3, #UARTLCR_DLAB + str w3, [x0, #UARTLCR] /* enable DLL, DLLM programming */ + str w1, [x0, #UARTDLL] /* program DLL */ + str w2, [x0, #UARTDLLM] /* program DLLM */ + mov w2, #~UARTLCR_DLAB + and w3, w3, w2 + str w3, [x0, #UARTLCR] /* disable DLL, DLLM programming */ + + /* 8n1 */ + mov w3, #3 + str w3, [x0, #UARTLCR] + /* no interrupt */ + mov w3, #0 + str w3, [x0, #UARTIER] + /* enable fifo, DMA */ + mov w3, #(UARTFCR_FIFOEN | UARTFCR_DMAEN) + str w3, [x0, #UARTFCR] + /* DTR + RTS */ + mov w3, #3 + str w3, [x0, #UARTMCR] + mov w0, #1 +init_fail: + ret +endfunc console_core_init + + /* -------------------------------------------------------- + * int console_core_putc(int c, unsigned int base_addr) + * Function to output a character over the console. It + * returns the character printed on success or -1 on error. + * In : w0 - character to be printed + * x1 - console base address + * Out : return -1 on error else return character. + * Clobber list : x2 + * -------------------------------------------------------- + */ +func console_core_putc + /* Check the input parameter */ + cbz x1, putc_error + + /* Prepend '\r' to '\n' */ + cmp w0, #0xA + b.ne 2f + /* Check if the transmit FIFO is full */ +1: ldr w2, [x1, #UARTLSR] + and w2, w2, #(UARTLSR_TEMT | UARTLSR_THRE) + cmp w2, #(UARTLSR_TEMT | UARTLSR_THRE) + b.ne 1b + mov w2, #0xD /* '\r' */ + str w2, [x1, #UARTTX] + ldr w2, [x1, #UARTFCR] + orr w2, w2, #UARTFCR_TXCLR + str w2, [x1, #UARTFCR] + + /* Check if the transmit FIFO is full */ +2: ldr w2, [x1, #UARTLSR] + and w2, w2, #(UARTLSR_TEMT | UARTLSR_THRE) + cmp w2, #(UARTLSR_TEMT | UARTLSR_THRE) + b.ne 2b + str w0, [x1, #UARTTX] + ldr w2, [x1, #UARTFCR] + orr w2, w2, #UARTFCR_TXCLR + str w2, [x1, #UARTFCR] + ret +putc_error: + mov w0, #-1 + ret +endfunc console_core_putc + + /* --------------------------------------------- + * int console_core_getc(void) + * Function to get a character from the console. + * It returns the character grabbed on success + * or -1 on error. + * In : w0 - console base address + * Out : return -1 on error else return character. + * Clobber list : x0, x1 + * --------------------------------------------- + */ +func console_core_getc + /* Check if the receive FIFO is empty */ +1: ldr w1, [x0, #UARTLSR] + tbz w1, #UARTLSR_RDR, 1b + ldr w0, [x0, #UARTRX] + ret +getc_error: + mov w0, #-1 + ret +endfunc console_core_getc -- 2.30.2