From 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4 Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Wed, 4 Jul 2007 22:32:57 -0500 Subject: [PATCH] include/configs: Use new CONFIG_CMD_* in various l* named board config files. Signed-off-by: Jon Loeliger --- include/configs/lart.h | 10 ++++--- include/configs/logodl.h | 15 ++++++++--- include/configs/lpc2292sodimm.h | 20 +++++++------- include/configs/lpd7a400.h | 16 ++++++----- include/configs/lpd7a404.h | 16 ++++++----- include/configs/luan.h | 48 +++++++++++++++++---------------- include/configs/lubbock.h | 13 ++++++--- include/configs/lwmon.h | 43 +++++++++++++++-------------- 8 files changed, 104 insertions(+), 77 deletions(-) diff --git a/include/configs/lart.h b/include/configs/lart.h index a00640bf8e..98bc3b257b 100644 --- a/include/configs/lart.h +++ b/include/configs/lart.h @@ -59,10 +59,12 @@ #define CONFIG_BAUDRATE 9600 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include +/* + * Command line configuration. + */ +#include + #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" @@ -73,7 +75,7 @@ #define CONFIG_BOOTFILE "elinos-lart" #define CONFIG_BOOTCOMMAND "tftp; bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/logodl.h b/include/configs/logodl.h index 715ed74ead..7c11eeb707 100644 --- a/include/configs/logodl.h +++ b/include/configs/logodl.h @@ -54,10 +54,17 @@ #define CONFIG_BAUDRATE 19200 #undef CONFIG_MISC_INIT_R /* FIXME: misc_init_r() missing */ -#define CONFIG_COMMANDS (CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO) -/* CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP) */ -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include + +/* + * Command line configuration. + */ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_RUN + #define CONFIG_BOOTDELAY 3 /* #define CONFIG_BOOTARGS "root=/dev/nfs ip=bootp console=ttyS0,19200" */ diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h index 7b6c6953e1..bddfa528a3 100644 --- a/include/configs/lpc2292sodimm.h +++ b/include/configs/lpc2292sodimm.h @@ -68,22 +68,22 @@ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) + /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_DHCP | \ - CFG_CMD_FAT | \ - CFG_CMD_MMC | \ - CFG_CMD_NET | \ - CFG_CMD_PING) +#include + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include - #define CONFIG_BOOTDELAY 5 /* diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h index d7d0460ef6..414cb14da8 100644 --- a/include/configs/lpd7a400.h +++ b/include/configs/lpd7a400.h @@ -55,19 +55,23 @@ #define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ + +/* + * Command line configuration. + */ +#include + #ifndef USE_920T_MMU -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE)) + #define CONFIG_CMD_PING + #undef CONFIG_CMD_CACHE #else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE) + #define CONFIG_CMD_DATE #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include - #define CONFIG_BOOTDELAY 3 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h index 4002e6849c..87815cb170 100644 --- a/include/configs/lpd7a404.h +++ b/include/configs/lpd7a404.h @@ -55,19 +55,23 @@ #define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */ + +/* + * Command line configuration. + */ +#include + #ifndef USE_920T_MMU -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE)) + #define CONFIG_CMD_PING) + #undef CONFIG_CMD_CACHE #else -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE) + #define CONFIG_CMD_DATE #endif -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include - #define CONFIG_BOOTDELAY 3 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ diff --git a/include/configs/luan.h b/include/configs/luan.h index cbb59c50ea..82af2fb075 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -213,31 +213,33 @@ #define CONFIG_HW_WATCHDOG /* watchdog */ #endif -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - 0) - -/* this must be included AFTER the definition of CONFIG_COMMANDS */ -#include + +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM + /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -265,7 +267,7 @@ * PCI stuff *----------------------------------------------------------------------- */ -#if (CONFIG_COMMANDS & CFG_CMD_PCI) +#if defined(CONFIG_CMD_PCI) /* General PCI */ #define CONFIG_PCI /* include pci support */ @@ -279,7 +281,7 @@ #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ #define CFG_PCI_SUBSYS_DEVICEID 0x4403 /* whatever */ -#endif /* CONFIG_COMMANDS & CFG_CMD_PCI */ +#endif /* * For booting Linux, the board info and command line data @@ -293,7 +295,7 @@ */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif @@ -305,7 +307,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index ad1035b6d6..eed589066e 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -67,10 +67,15 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT + #define CONFIG_BOOTDELAY 3 #define CONFIG_ETHADDR 08:00:3e:26:0a:5b @@ -82,7 +87,7 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_TIMESTAMP -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index 9b4c0046ef..627bc9cf41 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -176,28 +176,31 @@ #define CFG_CMD_POST_DIAG 0 #endif -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BMP | \ - CFG_CMD_BSP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_POST_DIAG | \ - CFG_CMD_SNTP ) + +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BMP +#define CONFIG_CMD_BSP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_POST +#define CONFIG_CMD_SNTP + + #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include - -/*----------------------------------------------------------------------*/ /* * Miscellaneous configurable options @@ -210,7 +213,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -276,7 +279,7 @@ */ #define CFG_SDRAM_BASE 0x00000000 #define CFG_FLASH_BASE 0x40000000 -#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE) +#if defined(DEBUG) || defiend(CONFIG_CMD_IDE) #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #else #define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ @@ -370,7 +373,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif -- 2.30.2