From 9bb47abf0d88e2dd151b36b39bf64c6593f417c8 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Thu, 10 Jun 2010 11:20:48 +0530 Subject: [PATCH] musb: Add Phy programming for using external Vbus MUSB PHY on OMAP3EVM Rev >= E uses external Vbus supply to support 500mA of power.We need to program MUSB PHY to use external Vbus for this purpose. Adding 'extvbus' member in musb_config structure which should be set by all the boards where MUSB interface is using external Vbus supply. Also added ULPI bus control register read/write abstraction for Blackfin processor as it doesn't have ULPI registers. CC: Remy Bohmer Signed-off-by: Ajay Kumar Gupta Acked-by: Mike Frysinger --- drivers/usb/musb/musb_core.c | 7 +++++++ drivers/usb/musb/musb_core.h | 30 +++++++++++++++++++++++++++++- 2 files changed, 36 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 7766069bfc..dc740cf18e 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -34,6 +34,7 @@ void musb_start(void) { #if defined(CONFIG_MUSB_HCD) u8 devctl; + u8 busctl; #endif /* disable all interrupts */ @@ -45,6 +46,12 @@ void musb_start(void) /* put into basic highspeed mode and start session */ writeb(MUSB_POWER_HSENAB, &musbr->power); #if defined(CONFIG_MUSB_HCD) + /* Program PHY to use EXT VBUS if required */ + if (musb_cfg.extvbus == 1) { + busctl = musb_read_ulpi_buscontrol(musbr); + musb_write_ulpi_buscontrol(musbr, busctl | ULPI_USE_EXTVBUS); + } + devctl = readb(&musbr->devctl); writeb(devctl | MUSB_DEVCTL_SESSION, &musbr->devctl); #endif diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 9a1fb4f316..4771876445 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -112,7 +112,10 @@ struct musb_regs { u16 rxfifoadd; u32 vcontrol; u16 hwvers; - u16 reserved2[5]; + u16 reserved2a[1]; + u8 ulpi_busctl; + u8 reserved2b[1]; + u16 reserved2[3]; u8 epinfo; u8 raminfo; u8 linkinfo; @@ -181,6 +184,10 @@ struct musb_regs { #define MUSB_DEVCTL_HR 0x02 #define MUSB_DEVCTL_SESSION 0x01 +/* ULPI VBUSCONTROL */ +#define ULPI_USE_EXTVBUS 0x01 +#define ULPI_USE_EXTVBUSIND 0x02 + /* TESTMODE */ #define MUSB_TEST_FORCE_HOST 0x80 #define MUSB_TEST_FIFO_ACCESS 0x40 @@ -341,6 +348,7 @@ struct musb_config { struct musb_regs *regs; u32 timeout; u8 musb_speed; + u8 extvbus; }; /* externally defined data */ @@ -361,6 +369,26 @@ extern void read_fifo(u8 ep, u32 length, void *fifo_data); # define readb(addr) (u8)bfin_read16(addr) # undef writeb # define writeb(b, addr) bfin_write16(addr, b) +/* + * The USB PHY on current Blackfin processors is a UTMI+ level 2 PHY. + * However, it has no ULPI support - so there are no registers at all. + * That means accesses to ULPI_BUSCONTROL have to be abstracted away. + */ +static inline u8 musb_read_ulpi_buscontrol(struct musb_regs *musbr) +{ + return 0; +} +static inline void musb_write_ulpi_buscontrol(struct musb_regs *musbr, u8 val) +{} +#else +static inline u8 musb_read_ulpi_buscontrol(struct musb_regs *musbr) +{ + return readb(&musbr->ulpi_busctl); +} +static inline void musb_write_ulpi_buscontrol(struct musb_regs *musbr, u8 val) +{ + writeb(val, &musbr->ulpi_busctl); +} #endif #endif /* __MUSB_HDRC_DEFS_H__ */ -- 2.30.2