From 9b43cffbbd3e9f77e16826513f26544cce3b5864 Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Fri, 12 Feb 2010 17:48:59 +0530 Subject: [PATCH] USB: ehci: omap: use default interrupt threshold The current driver reduces the interrupt threshold to 1 microframe. This was an accidental change and is not really required. The default of 8 microframes will do just fine. So change it back. Signed-off-by: Anand Gadiyar Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-omap.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 24d3d526b5d9..bd8922a15493 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -651,10 +651,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) /* cache this readonly data; minimize chip reads */ omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params); - /* SET 1 micro-frame Interrupt interval */ - writel(readl(&omap->ehci->regs->command) | (1 << 16), - &omap->ehci->regs->command); - ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (ret) { dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); -- 2.30.2