From 9a8fd5589902153a134111ed7a40f9cca1f83254 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Thu, 23 Jun 2005 22:01:26 -0700 Subject: [PATCH] [PATCH] xtensa: Architecture support for Tensilica Xtensa Part 6 The attached patches provides part 6 of an architecture implementation for the Tensilica Xtensa CPU series. Signed-off-by: Chris Zankel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-xtensa/a.out.h | 33 ++ include/asm-xtensa/atomic.h | 272 ++++++++++++++++ include/asm-xtensa/bitops.h | 446 +++++++++++++++++++++++++ include/asm-xtensa/bootparam.h | 61 ++++ include/asm-xtensa/bug.h | 41 +++ include/asm-xtensa/bugs.h | 22 ++ include/asm-xtensa/byteorder.h | 82 +++++ include/asm-xtensa/cache.h | 32 ++ include/asm-xtensa/cacheflush.h | 122 +++++++ include/asm-xtensa/checksum.h | 264 +++++++++++++++ include/asm-xtensa/coprocessor.h | 70 ++++ include/asm-xtensa/cpumask.h | 16 + include/asm-xtensa/cputime.h | 6 + include/asm-xtensa/current.h | 38 +++ include/asm-xtensa/delay.h | 50 +++ include/asm-xtensa/div64.h | 19 ++ include/asm-xtensa/dma-mapping.h | 182 +++++++++++ include/asm-xtensa/dma.h | 61 ++++ include/asm-xtensa/elf.h | 222 +++++++++++++ include/asm-xtensa/errno.h | 142 ++++++++ include/asm-xtensa/fcntl.h | 101 ++++++ include/asm-xtensa/fixmap.h | 252 +++++++++++++++ include/asm-xtensa/hardirq.h | 28 ++ include/asm-xtensa/hdreg.h | 17 + include/asm-xtensa/highmem.h | 17 + include/asm-xtensa/hw_irq.h | 18 ++ include/asm-xtensa/ide.h | 36 +++ include/asm-xtensa/io.h | 197 ++++++++++++ include/asm-xtensa/ioctl.h | 83 +++++ include/asm-xtensa/ioctls.h | 112 +++++++ include/asm-xtensa/ipc.h | 34 ++ include/asm-xtensa/ipcbuf.h | 37 +++ include/asm-xtensa/irq.h | 37 +++ include/asm-xtensa/kmap_types.h | 31 ++ include/asm-xtensa/linkage.h | 16 + include/asm-xtensa/local.h | 16 + include/asm-xtensa/mman.h | 80 +++++ include/asm-xtensa/mmu.h | 17 + include/asm-xtensa/mmu_context.h | 330 +++++++++++++++++++ include/asm-xtensa/module.h | 25 ++ include/asm-xtensa/msgbuf.h | 48 +++ include/asm-xtensa/namei.h | 26 ++ include/asm-xtensa/page.h | 133 ++++++++ include/asm-xtensa/page.h.n | 135 ++++++++ include/asm-xtensa/param.h | 34 ++ include/asm-xtensa/pci-bridge.h | 88 +++++ include/asm-xtensa/pci.h | 89 +++++ include/asm-xtensa/percpu.h | 16 + include/asm-xtensa/pgalloc.h | 116 +++++++ include/asm-xtensa/pgtable.h | 468 +++++++++++++++++++++++++++ include/asm-xtensa/poll.h | 37 +++ include/asm-xtensa/posix_types.h | 123 +++++++ include/asm-xtensa/processor.h | 205 ++++++++++++ include/asm-xtensa/ptrace.h | 135 ++++++++ include/asm-xtensa/resource.h | 16 + include/asm-xtensa/rmap.h | 16 + include/asm-xtensa/rwsem.h | 175 ++++++++++ include/asm-xtensa/scatterlist.h | 34 ++ include/asm-xtensa/sections.h | 16 + include/asm-xtensa/segment.h | 16 + include/asm-xtensa/semaphore.h | 129 ++++++++ include/asm-xtensa/sembuf.h | 44 +++ include/asm-xtensa/serial.h | 18 ++ include/asm-xtensa/setup.h | 16 + include/asm-xtensa/shmbuf.h | 50 +++ include/asm-xtensa/shmparam.h | 23 ++ include/asm-xtensa/sigcontext.h | 44 +++ include/asm-xtensa/siginfo.h | 16 + include/asm-xtensa/signal.h | 187 +++++++++++ include/asm-xtensa/smp.h | 27 ++ include/asm-xtensa/socket.h | 61 ++++ include/asm-xtensa/sockios.h | 30 ++ include/asm-xtensa/spinlock.h | 16 + include/asm-xtensa/stat.h | 105 ++++++ include/asm-xtensa/statfs.h | 17 + include/asm-xtensa/string.h | 124 +++++++ include/asm-xtensa/system.h | 252 +++++++++++++++ include/asm-xtensa/termbits.h | 194 +++++++++++ include/asm-xtensa/termios.h | 122 +++++++ include/asm-xtensa/thread_info.h | 146 +++++++++ include/asm-xtensa/timex.h | 94 ++++++ include/asm-xtensa/tlb.h | 25 ++ include/asm-xtensa/tlbflush.h | 200 ++++++++++++ include/asm-xtensa/topology.h | 16 + include/asm-xtensa/types.h | 66 ++++ include/asm-xtensa/uaccess.h | 532 ++++++++++++++++++++++++++++++ include/asm-xtensa/ucontext.h | 22 ++ include/asm-xtensa/unaligned.h | 28 ++ include/asm-xtensa/unistd.h | 537 +++++++++++++++++++++++++++++++ include/asm-xtensa/user.h | 20 ++ include/asm-xtensa/vga.h | 19 ++ include/asm-xtensa/xor.h | 16 + 92 files changed, 8787 insertions(+) create mode 100644 include/asm-xtensa/a.out.h create mode 100644 include/asm-xtensa/atomic.h create mode 100644 include/asm-xtensa/bitops.h create mode 100644 include/asm-xtensa/bootparam.h create mode 100644 include/asm-xtensa/bug.h create mode 100644 include/asm-xtensa/bugs.h create mode 100644 include/asm-xtensa/byteorder.h create mode 100644 include/asm-xtensa/cache.h create mode 100644 include/asm-xtensa/cacheflush.h create mode 100644 include/asm-xtensa/checksum.h create mode 100644 include/asm-xtensa/coprocessor.h create mode 100644 include/asm-xtensa/cpumask.h create mode 100644 include/asm-xtensa/cputime.h create mode 100644 include/asm-xtensa/current.h create mode 100644 include/asm-xtensa/delay.h create mode 100644 include/asm-xtensa/div64.h create mode 100644 include/asm-xtensa/dma-mapping.h create mode 100644 include/asm-xtensa/dma.h create mode 100644 include/asm-xtensa/elf.h create mode 100644 include/asm-xtensa/errno.h create mode 100644 include/asm-xtensa/fcntl.h create mode 100644 include/asm-xtensa/fixmap.h create mode 100644 include/asm-xtensa/hardirq.h create mode 100644 include/asm-xtensa/hdreg.h create mode 100644 include/asm-xtensa/highmem.h create mode 100644 include/asm-xtensa/hw_irq.h create mode 100644 include/asm-xtensa/ide.h create mode 100644 include/asm-xtensa/io.h create mode 100644 include/asm-xtensa/ioctl.h create mode 100644 include/asm-xtensa/ioctls.h create mode 100644 include/asm-xtensa/ipc.h create mode 100644 include/asm-xtensa/ipcbuf.h create mode 100644 include/asm-xtensa/irq.h create mode 100644 include/asm-xtensa/kmap_types.h create mode 100644 include/asm-xtensa/linkage.h create mode 100644 include/asm-xtensa/local.h create mode 100644 include/asm-xtensa/mman.h create mode 100644 include/asm-xtensa/mmu.h create mode 100644 include/asm-xtensa/mmu_context.h create mode 100644 include/asm-xtensa/module.h create mode 100644 include/asm-xtensa/msgbuf.h create mode 100644 include/asm-xtensa/namei.h create mode 100644 include/asm-xtensa/page.h create mode 100644 include/asm-xtensa/page.h.n create mode 100644 include/asm-xtensa/param.h create mode 100644 include/asm-xtensa/pci-bridge.h create mode 100644 include/asm-xtensa/pci.h create mode 100644 include/asm-xtensa/percpu.h create mode 100644 include/asm-xtensa/pgalloc.h create mode 100644 include/asm-xtensa/pgtable.h create mode 100644 include/asm-xtensa/poll.h create mode 100644 include/asm-xtensa/posix_types.h create mode 100644 include/asm-xtensa/processor.h create mode 100644 include/asm-xtensa/ptrace.h create mode 100644 include/asm-xtensa/resource.h create mode 100644 include/asm-xtensa/rmap.h create mode 100644 include/asm-xtensa/rwsem.h create mode 100644 include/asm-xtensa/scatterlist.h create mode 100644 include/asm-xtensa/sections.h create mode 100644 include/asm-xtensa/segment.h create mode 100644 include/asm-xtensa/semaphore.h create mode 100644 include/asm-xtensa/sembuf.h create mode 100644 include/asm-xtensa/serial.h create mode 100644 include/asm-xtensa/setup.h create mode 100644 include/asm-xtensa/shmbuf.h create mode 100644 include/asm-xtensa/shmparam.h create mode 100644 include/asm-xtensa/sigcontext.h create mode 100644 include/asm-xtensa/siginfo.h create mode 100644 include/asm-xtensa/signal.h create mode 100644 include/asm-xtensa/smp.h create mode 100644 include/asm-xtensa/socket.h create mode 100644 include/asm-xtensa/sockios.h create mode 100644 include/asm-xtensa/spinlock.h create mode 100644 include/asm-xtensa/stat.h create mode 100644 include/asm-xtensa/statfs.h create mode 100644 include/asm-xtensa/string.h create mode 100644 include/asm-xtensa/system.h create mode 100644 include/asm-xtensa/termbits.h create mode 100644 include/asm-xtensa/termios.h create mode 100644 include/asm-xtensa/thread_info.h create mode 100644 include/asm-xtensa/timex.h create mode 100644 include/asm-xtensa/tlb.h create mode 100644 include/asm-xtensa/tlbflush.h create mode 100644 include/asm-xtensa/topology.h create mode 100644 include/asm-xtensa/types.h create mode 100644 include/asm-xtensa/uaccess.h create mode 100644 include/asm-xtensa/ucontext.h create mode 100644 include/asm-xtensa/unaligned.h create mode 100644 include/asm-xtensa/unistd.h create mode 100644 include/asm-xtensa/user.h create mode 100644 include/asm-xtensa/vga.h create mode 100644 include/asm-xtensa/xor.h diff --git a/include/asm-xtensa/a.out.h b/include/asm-xtensa/a.out.h new file mode 100644 index 000000000000..3be701dfe098 --- /dev/null +++ b/include/asm-xtensa/a.out.h @@ -0,0 +1,33 @@ +/* + * include/asm-xtensa/addrspace.h + * + * Dummy a.out file. Xtensa does not support the a.out format, but the kernel + * seems to depend on it. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_A_OUT_H +#define _XTENSA_A_OUT_H + +/* Note: the kernel needs the a.out definitions, even if only ELF is used. */ + +#define STACK_TOP TASK_SIZE + +struct exec +{ + unsigned long a_info; + unsigned a_text; + unsigned a_data; + unsigned a_bss; + unsigned a_syms; + unsigned a_entry; + unsigned a_trsize; + unsigned a_drsize; +}; + +#endif /* _XTENSA_A_OUT_H */ diff --git a/include/asm-xtensa/atomic.h b/include/asm-xtensa/atomic.h new file mode 100644 index 000000000000..d72bcb32ba4f --- /dev/null +++ b/include/asm-xtensa/atomic.h @@ -0,0 +1,272 @@ +/* + * include/asm-xtensa/atomic.h + * + * Atomic operations that C can't guarantee us. Useful for resource counting.. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_ATOMIC_H +#define _XTENSA_ATOMIC_H + +#include +#include + +typedef struct { volatile int counter; } atomic_t; + +#ifdef __KERNEL__ +#include +#include + +#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) + +/* + * This Xtensa implementation assumes that the right mechanism + * for exclusion is for locking interrupts to level 1. + * + * Locking interrupts looks like this: + * + * rsil a15, 1 + * + * wsr a15, PS + * rsync + * + * Note that a15 is used here because the register allocation + * done by the compiler is not guaranteed and a window overflow + * may not occur between the rsil and wsr instructions. By using + * a15 in the rsil, the machine is guaranteed to be in a state + * where no register reference will cause an overflow. + */ + +/** + * atomic_read - read atomic variable + * @v: pointer of type atomic_t + * + * Atomically reads the value of @v. + */ +#define atomic_read(v) ((v)->counter) + +/** + * atomic_set - set atomic variable + * @v: pointer of type atomic_t + * @i: required value + * + * Atomically sets the value of @v to @i. + */ +#define atomic_set(v,i) ((v)->counter = (i)) + +/** + * atomic_add - add integer to atomic variable + * @i: integer value to add + * @v: pointer of type atomic_t + * + * Atomically adds @i to @v. + */ +extern __inline__ void atomic_add(int i, atomic_t * v) +{ + unsigned int vval; + + __asm__ __volatile__( + "rsil a15, "__stringify(LOCKLEVEL)"\n\t" + "l32i %0, %2, 0 \n\t" + "add %0, %0, %1 \n\t" + "s32i %0, %2, 0 \n\t" + "wsr a15, "__stringify(PS)" \n\t" + "rsync \n" + : "=&a" (vval) + : "a" (i), "a" (v) + : "a15", "memory" + ); +} + +/** + * atomic_sub - subtract the atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v. + */ +extern __inline__ void atomic_sub(int i, atomic_t *v) +{ + unsigned int vval; + + __asm__ __volatile__( + "rsil a15, "__stringify(LOCKLEVEL)"\n\t" + "l32i %0, %2, 0 \n\t" + "sub %0, %0, %1 \n\t" + "s32i %0, %2, 0 \n\t" + "wsr a15, "__stringify(PS)" \n\t" + "rsync \n" + : "=&a" (vval) + : "a" (i), "a" (v) + : "a15", "memory" + ); +} + +/* + * We use atomic_{add|sub}_return to define other functions. + */ + +extern __inline__ int atomic_add_return(int i, atomic_t * v) +{ + unsigned int vval; + + __asm__ __volatile__( + "rsil a15,"__stringify(LOCKLEVEL)"\n\t" + "l32i %0, %2, 0 \n\t" + "add %0, %0, %1 \n\t" + "s32i %0, %2, 0 \n\t" + "wsr a15, "__stringify(PS)" \n\t" + "rsync \n" + : "=&a" (vval) + : "a" (i), "a" (v) + : "a15", "memory" + ); + + return vval; +} + +extern __inline__ int atomic_sub_return(int i, atomic_t * v) +{ + unsigned int vval; + + __asm__ __volatile__( + "rsil a15,"__stringify(LOCKLEVEL)"\n\t" + "l32i %0, %2, 0 \n\t" + "sub %0, %0, %1 \n\t" + "s32i %0, %2, 0 \n\t" + "wsr a15, "__stringify(PS)" \n\t" + "rsync \n" + : "=&a" (vval) + : "a" (i), "a" (v) + : "a15", "memory" + ); + + return vval; +} + +/** + * atomic_sub_and_test - subtract value from variable and test result + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v and returns + * true if the result is zero, or false for all + * other cases. + */ +#define atomic_sub_and_test(i,v) (atomic_sub_return((i),(v)) == 0) + +/** + * atomic_inc - increment atomic variable + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1. + */ +#define atomic_inc(v) atomic_add(1,(v)) + +/** + * atomic_inc - increment atomic variable + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1. + */ +#define atomic_inc_return(v) atomic_add_return(1,(v)) + +/** + * atomic_dec - decrement atomic variable + * @v: pointer of type atomic_t + * + * Atomically decrements @v by 1. + */ +#define atomic_dec(v) atomic_sub(1,(v)) + +/** + * atomic_dec_return - decrement atomic variable + * @v: pointer of type atomic_t + * + * Atomically decrements @v by 1. + */ +#define atomic_dec_return(v) atomic_sub_return(1,(v)) + +/** + * atomic_dec_and_test - decrement and test + * @v: pointer of type atomic_t + * + * Atomically decrements @v by 1 and + * returns true if the result is 0, or false for all other + * cases. + */ +#define atomic_dec_and_test(v) (atomic_sub_return(1,(v)) == 0) + +/** + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic_inc_and_test(v) (atomic_add_return(1,(v)) == 0) + +/** + * atomic_add_negative - add and test if negative + * @v: pointer of type atomic_t + * @i: integer value to add + * + * Atomically adds @i to @v and returns true + * if the result is negative, or false when + * result is greater than or equal to zero. + */ +#define atomic_add_negative(i,v) (atomic_add_return((i),(v)) < 0) + + +extern __inline__ void atomic_clear_mask(unsigned int mask, atomic_t *v) +{ + unsigned int all_f = -1; + unsigned int vval; + + __asm__ __volatile__( + "rsil a15,"__stringify(LOCKLEVEL)"\n\t" + "l32i %0, %2, 0 \n\t" + "xor %1, %4, %3 \n\t" + "and %0, %0, %4 \n\t" + "s32i %0, %2, 0 \n\t" + "wsr a15, "__stringify(PS)" \n\t" + "rsync \n" + : "=&a" (vval), "=a" (mask) + : "a" (v), "a" (all_f), "1" (mask) + : "a15", "memory" + ); +} + +extern __inline__ void atomic_set_mask(unsigned int mask, atomic_t *v) +{ + unsigned int vval; + + __asm__ __volatile__( + "rsil a15,"__stringify(LOCKLEVEL)"\n\t" + "l32i %0, %2, 0 \n\t" + "or %0, %0, %1 \n\t" + "s32i %0, %2, 0 \n\t" + "wsr a15, "__stringify(PS)" \n\t" + "rsync \n" + : "=&a" (vval) + : "a" (mask), "a" (v) + : "a15", "memory" + ); +} + +/* Atomic operations are already serializing */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#endif /* __KERNEL__ */ + +#endif /* _XTENSA_ATOMIC_H */ + diff --git a/include/asm-xtensa/bitops.h b/include/asm-xtensa/bitops.h new file mode 100644 index 000000000000..d395ef226c32 --- /dev/null +++ b/include/asm-xtensa/bitops.h @@ -0,0 +1,446 @@ +/* + * include/asm-xtensa/bitops.h + * + * Atomic operations that C can't guarantee us.Useful for resource counting etc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_BITOPS_H +#define _XTENSA_BITOPS_H + +#ifdef __KERNEL__ + +#include +#include +#include + +#ifdef CONFIG_SMP +# error SMP not supported on this architecture +#endif + +static __inline__ void set_bit(int nr, volatile void * addr) +{ + unsigned long mask = 1 << (nr & 0x1f); + unsigned long *a = ((unsigned long *)addr) + (nr >> 5); + unsigned long flags; + + local_irq_save(flags); + *a |= mask; + local_irq_restore(flags); +} + +static __inline__ void __set_bit(int nr, volatile unsigned long * addr) +{ + unsigned long mask = 1 << (nr & 0x1f); + unsigned long *a = ((unsigned long *)addr) + (nr >> 5); + + *a |= mask; +} + +static __inline__ void clear_bit(int nr, volatile void * addr) +{ + unsigned long mask = 1 << (nr & 0x1f); + unsigned long *a = ((unsigned long *)addr) + (nr >> 5); + unsigned long flags; + + local_irq_save(flags); + *a &= ~mask; + local_irq_restore(flags); +} + +static __inline__ void __clear_bit(int nr, volatile unsigned long *addr) +{ + unsigned long mask = 1 << (nr & 0x1f); + unsigned long *a = ((unsigned long *)addr) + (nr >> 5); + + *a &= ~mask; +} + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ + +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +static __inline__ void change_bit(int nr, volatile void * addr) +{ + unsigned long mask = 1 << (nr & 0x1f); + unsigned long *a = ((unsigned long *)addr) + (nr >> 5); + unsigned long flags; + + local_irq_save(flags); + *a ^= mask; + local_irq_restore(flags); +} + +static __inline__ void __change_bit(int nr, volatile void * addr) +{ + unsigned long mask = 1 << (nr & 0x1f); + unsigned long *a = ((unsigned long *)addr) + (nr >> 5); + + *a ^= mask; +} + +static __inline__ int test_and_set_bit(int nr, volatile void * addr) +{ + unsigned long retval; + unsigned long mask = 1 << (nr & 0x1f); + unsigned long *a = ((unsigned long *)addr) + (nr >> 5); + unsigned long flags; + + local_irq_save(flags); + retval = (mask & *a) != 0; + *a |= mask; + local_irq_restore(flags); + + return retval; +} + +static __inline__ int __test_and_set_bit(int nr, volatile void * addr) +{ + unsigned long retval; + unsigned long mask = 1 << (nr & 0x1f); + unsigned long *a = ((unsigned long *)addr) + (nr >> 5); + + retval = (mask & *a) != 0; + *a |= mask; + + return retval; +} + +static __inline__ int test_and_clear_bit(int nr, volatile void * addr) +{ + unsigned long retval; + unsigned long mask = 1 << (nr & 0x1f); + unsigned long *a = ((unsigned long *)addr) + (nr >> 5); + unsigned long flags; + + local_irq_save(flags); + retval = (mask & *a) != 0; + *a &= ~mask; + local_irq_restore(flags); + + return retval; +} + +static __inline__ int __test_and_clear_bit(int nr, volatile void * addr) +{ + unsigned long mask = 1 << (nr & 0x1f); + unsigned long *a = ((unsigned long *)addr) + (nr >> 5); + unsigned long old = *a; + + *a = old & ~mask; + return (old & mask) != 0; +} + +static __inline__ int test_and_change_bit(int nr, volatile void * addr) +{ + unsigned long retval; + unsigned long mask = 1 << (nr & 0x1f); + unsigned long *a = ((unsigned long *)addr) + (nr >> 5); + unsigned long flags; + + local_irq_save(flags); + + retval = (mask & *a) != 0; + *a ^= mask; + local_irq_restore(flags); + + return retval; +} + +/* + * non-atomic version; can be reordered + */ + +static __inline__ int __test_and_change_bit(int nr, volatile void *addr) +{ + unsigned long mask = 1 << (nr & 0x1f); + unsigned long *a = ((unsigned long *)addr) + (nr >> 5); + unsigned long old = *a; + + *a = old ^ mask; + return (old & mask) != 0; +} + +static __inline__ int test_bit(int nr, const volatile void *addr) +{ + return 1UL & (((const volatile unsigned int *)addr)[nr>>5] >> (nr&31)); +} + +#if XCHAL_HAVE_NSAU + +static __inline__ int __cntlz (unsigned long x) +{ + int lz; + asm ("nsau %0, %1" : "=r" (lz) : "r" (x)); + return 31 - lz; +} + +#else + +static __inline__ int __cntlz (unsigned long x) +{ + unsigned long sum, x1, x2, x4, x8, x16; + x1 = x & 0xAAAAAAAA; + x2 = x & 0xCCCCCCCC; + x4 = x & 0xF0F0F0F0; + x8 = x & 0xFF00FF00; + x16 = x & 0xFFFF0000; + sum = x2 ? 2 : 0; + sum += (x16 != 0) * 16; + sum += (x8 != 0) * 8; + sum += (x4 != 0) * 4; + sum += (x1 != 0); + + return sum; +} + +#endif + +/* + * ffz: Find first zero in word. Undefined if no zero exists. + * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). + */ + +static __inline__ int ffz(unsigned long x) +{ + if ((x = ~x) == 0) + return 32; + return __cntlz(x & -x); +} + +/* + * __ffs: Find first bit set in word. Return 0 for bit 0 + */ + +static __inline__ int __ffs(unsigned long x) +{ + return __cntlz(x & -x); +} + +/* + * ffs: Find first bit set in word. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ + +static __inline__ int ffs(unsigned long x) +{ + return __cntlz(x & -x) + 1; +} + +/* + * fls: Find last (most-significant) bit set in word. + * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. + */ + +static __inline__ int fls (unsigned int x) +{ + return __cntlz(x); +} + +static __inline__ int +find_next_bit(const unsigned long *addr, int size, int offset) +{ + const unsigned long *p = addr + (offset >> 5); + unsigned long result = offset & ~31UL; + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset &= 31UL; + if (offset) { + tmp = *p++; + tmp &= ~0UL << offset; + if (size < 32) + goto found_first; + if (tmp) + goto found_middle; + size -= 32; + result += 32; + } + while (size >= 32) { + if ((tmp = *p++) != 0) + goto found_middle; + result += 32; + size -= 32; + } + if (!size) + return result; + tmp = *p; + +found_first: + tmp &= ~0UL >> (32 - size); + if (tmp == 0UL) /* Are any bits set? */ + return result + size; /* Nope. */ +found_middle: + return result + __ffs(tmp); +} + +/** + * find_first_bit - find the first set bit in a memory region + * @addr: The address to start the search at + * @size: The maximum size to search + * + * Returns the bit-number of the first set bit, not the number of the byte + * containing a bit. + */ + +#define find_first_bit(addr, size) \ + find_next_bit((addr), (size), 0) + +static __inline__ int +find_next_zero_bit(const unsigned long *addr, int size, int offset) +{ + const unsigned long *p = addr + (offset >> 5); + unsigned long result = offset & ~31UL; + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset &= 31UL; + if (offset) { + tmp = *p++; + tmp |= ~0UL >> (32-offset); + if (size < 32) + goto found_first; + if (~tmp) + goto found_middle; + size -= 32; + result += 32; + } + while (size & ~31UL) { + if (~(tmp = *p++)) + goto found_middle; + result += 32; + size -= 32; + } + if (!size) + return result; + tmp = *p; + +found_first: + tmp |= ~0UL << size; +found_middle: + return result + ffz(tmp); +} + +#define find_first_zero_bit(addr, size) \ + find_next_zero_bit((addr), (size), 0) + +#ifdef __XTENSA_EL__ +# define ext2_set_bit(nr,addr) __test_and_set_bit((nr), (addr)) +# define ext2_set_bit_atomic(lock,nr,addr) test_and_set_bit((nr),(addr)) +# define ext2_clear_bit(nr,addr) __test_and_clear_bit((nr), (addr)) +# define ext2_clear_bit_atomic(lock,nr,addr) test_and_clear_bit((nr),(addr)) +# define ext2_test_bit(nr,addr) test_bit((nr), (addr)) +# define ext2_find_first_zero_bit(addr, size) find_first_zero_bit((addr),(size)) +# define ext2_find_next_zero_bit(addr, size, offset) \ + find_next_zero_bit((addr), (size), (offset)) +#elif defined(__XTENSA_EB__) +# define ext2_set_bit(nr,addr) __test_and_set_bit((nr) ^ 0x18, (addr)) +# define ext2_set_bit_atomic(lock,nr,addr) test_and_set_bit((nr) ^ 0x18, (addr)) +# define ext2_clear_bit(nr,addr) __test_and_clear_bit((nr) ^ 18, (addr)) +# define ext2_clear_bit_atomic(lock,nr,addr) test_and_clear_bit((nr)^0x18,(addr)) +# define ext2_test_bit(nr,addr) test_bit((nr) ^ 0x18, (addr)) +# define ext2_find_first_zero_bit(addr, size) \ + ext2_find_next_zero_bit((addr), (size), 0) + +static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset) +{ + unsigned long *p = ((unsigned long *) addr) + (offset >> 5); + unsigned long result = offset & ~31UL; + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset &= 31UL; + if(offset) { + /* We hold the little endian value in tmp, but then the + * shift is illegal. So we could keep a big endian value + * in tmp, like this: + * + * tmp = __swab32(*(p++)); + * tmp |= ~0UL >> (32-offset); + * + * but this would decrease preformance, so we change the + * shift: + */ + tmp = *(p++); + tmp |= __swab32(~0UL >> (32-offset)); + if(size < 32) + goto found_first; + if(~tmp) + goto found_middle; + size -= 32; + result += 32; + } + while(size & ~31UL) { + if(~(tmp = *(p++))) + goto found_middle; + result += 32; + size -= 32; + } + if(!size) + return result; + tmp = *p; + +found_first: + /* tmp is little endian, so we would have to swab the shift, + * see above. But then we have to swab tmp below for ffz, so + * we might as well do this here. + */ + return result + ffz(__swab32(tmp) | (~0UL << size)); +found_middle: + return result + ffz(__swab32(tmp)); +} + +#else +# error processor byte order undefined! +#endif + + +#define hweight32(x) generic_hweight32(x) +#define hweight16(x) generic_hweight16(x) +#define hweight8(x) generic_hweight8(x) + +/* + * Find the first bit set in a 140-bit bitmap. + * The first 100 bits are unlikely to be set. + */ + +static inline int sched_find_first_bit(const unsigned long *b) +{ + if (unlikely(b[0])) + return __ffs(b[0]); + if (unlikely(b[1])) + return __ffs(b[1]) + 32; + if (unlikely(b[2])) + return __ffs(b[2]) + 64; + if (b[3]) + return __ffs(b[3]) + 96; + return __ffs(b[4]) + 128; +} + + +/* Bitmap functions for the minix filesystem. */ + +#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr) +#define minix_set_bit(nr,addr) set_bit(nr,addr) +#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr) +#define minix_test_bit(nr,addr) test_bit(nr,addr) +#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size) + +#endif /* __KERNEL__ */ + +#endif /* _XTENSA_BITOPS_H */ diff --git a/include/asm-xtensa/bootparam.h b/include/asm-xtensa/bootparam.h new file mode 100644 index 000000000000..9983f2c1b7ee --- /dev/null +++ b/include/asm-xtensa/bootparam.h @@ -0,0 +1,61 @@ +/* + * include/asm-xtensa/bootparam.h + * + * Definition of the Linux/Xtensa boot parameter structure + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * (Concept borrowed from the 68K port) + */ + +#ifndef _XTENSA_BOOTPARAM_H +#define _XTENSA_BOOTPARAM_H + +#define BP_VERSION 0x0001 + +#define BP_TAG_COMMAND_LINE 0x1001 /* command line (0-terminated string)*/ +#define BP_TAG_INITRD 0x1002 /* ramdisk addr and size (bp_meminfo) */ +#define BP_TAG_MEMORY 0x1003 /* memory addr and size (bp_meminfo) */ +#define BP_TAG_SERIAL_BAUSRATE 0x1004 /* baud rate of current console. */ +#define BP_TAG_SERIAL_PORT 0x1005 /* serial device of current console */ + +#define BP_TAG_FIRST 0x7B0B /* first tag with a version number */ +#define BP_TAG_LAST 0x7E0B /* last tag */ + +#ifndef __ASSEMBLY__ + +/* All records are aligned to 4 bytes */ + +typedef struct bp_tag { + unsigned short id; /* tag id */ + unsigned short size; /* size of this record excluding the structure*/ + unsigned long data[0]; /* data */ +} bp_tag_t; + +typedef struct meminfo { + unsigned long type; + unsigned long start; + unsigned long end; +} meminfo_t; + +#define SYSMEM_BANKS_MAX 5 + +#define MEMORY_TYPE_CONVENTIONAL 0x1000 +#define MEMORY_TYPE_NONE 0x2000 + +typedef struct sysmem_info { + int nr_banks; + meminfo_t bank[SYSMEM_BANKS_MAX]; +} sysmem_info_t; + +extern sysmem_info_t sysmem; + +#endif +#endif + + + diff --git a/include/asm-xtensa/bug.h b/include/asm-xtensa/bug.h new file mode 100644 index 000000000000..56703659b204 --- /dev/null +++ b/include/asm-xtensa/bug.h @@ -0,0 +1,41 @@ +/* + * include/asm-xtensa/bug.h + * + * Macros to cause a 'bug' message. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_BUG_H +#define _XTENSA_BUG_H + +#include + +#define ILL __asm__ __volatile__ (".byte 0,0,0\n") + +#ifdef CONFIG_KALLSYMS +# define BUG() do { \ + printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \ + ILL; \ +} while (0) +#else +# define BUG() do { \ + printk("kernel BUG!\n"); \ + ILL; \ +} while (0) +#endif + +#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0) +#define PAGE_BUG(page) do { BUG(); } while (0) +#define WARN_ON(condition) do { \ + if (unlikely((condition)!=0)) { \ + printk ("Warning in %s at %s:%d\n", __FUNCTION__, __FILE__, __LINE__); \ + dump_stack(); \ + } \ +} while (0) + +#endif /* _XTENSA_BUG_H */ diff --git a/include/asm-xtensa/bugs.h b/include/asm-xtensa/bugs.h new file mode 100644 index 000000000000..c42285320133 --- /dev/null +++ b/include/asm-xtensa/bugs.h @@ -0,0 +1,22 @@ +/* + * include/asm-xtensa/bugs.h + * + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Xtensa processors don't have any bugs. :) + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef _XTENSA_BUGS_H +#define _XTENSA_BUGS_H + +#include + +static void __init check_bugs(void) +{ +} + +#endif /* _XTENSA_BUGS_H */ diff --git a/include/asm-xtensa/byteorder.h b/include/asm-xtensa/byteorder.h new file mode 100644 index 000000000000..0b1552569aae --- /dev/null +++ b/include/asm-xtensa/byteorder.h @@ -0,0 +1,82 @@ +/* + * include/asm-xtensa/byteorder.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_BYTEORDER_H +#define _XTENSA_BYTEORDER_H + +#include +#include + +static __inline__ __const__ __u32 ___arch__swab32(__u32 x) +{ + __u32 res; + /* instruction sequence from Xtensa ISA release 2/2000 */ + __asm__("ssai 8 \n\t" + "srli %0, %1, 16 \n\t" + "src %0, %0, %1 \n\t" + "src %0, %0, %0 \n\t" + "src %0, %1, %0 \n" + : "=&a" (res) + : "a" (x) + ); + return res; +} + +static __inline__ __const__ __u16 ___arch__swab16(__u16 x) +{ + /* Given that 'short' values are signed (i.e., can be negative), + * we cannot assume that the upper 16-bits of the register are + * zero. We are careful to mask values after shifting. + */ + + /* There exists an anomaly between xt-gcc and xt-xcc. xt-gcc + * inserts an extui instruction after putting this function inline + * to ensure that it uses only the least-significant 16 bits of + * the result. xt-xcc doesn't use an extui, but assumes the + * __asm__ macro follows convention that the upper 16 bits of an + * 'unsigned short' result are still zero. This macro doesn't + * follow convention; indeed, it leaves garbage in the upport 16 + * bits of the register. + + * Declaring the temporary variables 'res' and 'tmp' to be 32-bit + * types while the return type of the function is a 16-bit type + * forces both compilers to insert exactly one extui instruction + * (or equivalent) to mask off the upper 16 bits. */ + + __u32 res; + __u32 tmp; + + __asm__("extui %1, %2, 8, 8\n\t" + "slli %0, %2, 8 \n\t" + "or %0, %0, %1 \n" + : "=&a" (res), "=&a" (tmp) + : "a" (x) + ); + + return res; +} + +#define __arch__swab32(x) ___arch__swab32(x) +#define __arch__swab16(x) ___arch__swab16(x) + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#ifdef __XTENSA_EL__ +# include +#elif defined(__XTENSA_EB__) +# include +#else +# error processor byte order undefined! +#endif + +#endif /* __ASM_XTENSA_BYTEORDER_H */ diff --git a/include/asm-xtensa/cache.h b/include/asm-xtensa/cache.h new file mode 100644 index 000000000000..5aae3f12407c --- /dev/null +++ b/include/asm-xtensa/cache.h @@ -0,0 +1,32 @@ +/* + * include/asm-xtensa/cacheflush.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * 2 of the License, or (at your option) any later version. + * + * (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_CACHE_H +#define _XTENSA_CACHE_H + +#include + +#if XCHAL_ICACHE_SIZE > 0 +# if (XCHAL_ICACHE_SIZE % (XCHAL_ICACHE_LINESIZE*XCHAL_ICACHE_WAYS*4)) != 0 +# error cache configuration outside expected/supported range! +# endif +#endif + +#if XCHAL_DCACHE_SIZE > 0 +# if (XCHAL_DCACHE_SIZE % (XCHAL_DCACHE_LINESIZE*XCHAL_DCACHE_WAYS*4)) != 0 +# error cache configuration outside expected/supported range! +# endif +#endif + +#define L1_CACHE_SHIFT XCHAL_CACHE_LINEWIDTH_MAX +#define L1_CACHE_BYTES XCHAL_CACHE_LINESIZE_MAX + +#endif /* _XTENSA_CACHE_H */ diff --git a/include/asm-xtensa/cacheflush.h b/include/asm-xtensa/cacheflush.h new file mode 100644 index 000000000000..44a36e087844 --- /dev/null +++ b/include/asm-xtensa/cacheflush.h @@ -0,0 +1,122 @@ +/* + * include/asm-xtensa/cacheflush.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_CACHEFLUSH_H +#define _XTENSA_CACHEFLUSH_H + +#ifdef __KERNEL__ + +#include +#include +#include + +/* + * flush and invalidate data cache, invalidate instruction cache: + * + * __flush_invalidate_cache_all() + * __flush_invalidate_cache_range(from,sze) + * + * invalidate data or instruction cache: + * + * __invalidate_icache_all() + * __invalidate_icache_page(adr) + * __invalidate_dcache_page(adr) + * __invalidate_icache_range(from,size) + * __invalidate_dcache_range(from,size) + * + * flush data cache: + * + * __flush_dcache_page(adr) + * + * flush and invalidate data cache: + * + * __flush_invalidate_dcache_all() + * __flush_invalidate_dcache_page(adr) + * __flush_invalidate_dcache_range(from,size) + */ + +extern void __flush_invalidate_cache_all(void); +extern void __flush_invalidate_cache_range(unsigned long, unsigned long); +extern void __flush_invalidate_dcache_all(void); +extern void __invalidate_icache_all(void); + +extern void __invalidate_dcache_page(unsigned long); +extern void __invalidate_icache_page(unsigned long); +extern void __invalidate_icache_range(unsigned long, unsigned long); +extern void __invalidate_dcache_range(unsigned long, unsigned long); + +#if XCHAL_DCACHE_IS_WRITEBACK +extern void __flush_dcache_page(unsigned long); +extern void __flush_invalidate_dcache_page(unsigned long); +extern void __flush_invalidate_dcache_range(unsigned long, unsigned long); +#else +# define __flush_dcache_page(p) do { } while(0) +# define __flush_invalidate_dcache_page(p) do { } while(0) +# define __flush_invalidate_dcache_range(p,s) do { } while(0) +#endif + +/* + * We have physically tagged caches - nothing to do here - + * unless we have cache aliasing. + * + * Pages can get remapped. Because this might change the 'color' of that page, + * we have to flush the cache before the PTE is changed. + * (see also Documentation/cachetlb.txt) + */ + +#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK + +#define flush_cache_all() __flush_invalidate_cache_all(); +#define flush_cache_mm(mm) __flush_invalidate_cache_all(); + +#define flush_cache_vmap(start,end) __flush_invalidate_cache_all(); +#define flush_cache_vunmap(start,end) __flush_invalidate_cache_all(); + +extern void flush_dcache_page(struct page*); + +extern void flush_cache_range(struct vm_area_struct*, ulong, ulong); +extern void flush_cache_page(struct vm_area_struct*, unsigned long, unsigned long); + +#else + +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) + +#define flush_cache_vmap(start,end) do { } while (0) +#define flush_cache_vunmap(start,end) do { } while (0) + +#define flush_dcache_page(page) do { } while (0) + +#define flush_cache_page(vma,addr,pfn) do { } while (0) +#define flush_cache_range(vma,start,end) do { } while (0) + +#endif + +#define flush_icache_range(start,end) \ + __invalidate_icache_range(start,(end)-(start)) + +/* This is not required, see Documentation/cachetlb.txt */ + +#define flush_icache_page(vma,page) do { } while(0) + +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +#endif /* __KERNEL__ */ + +#endif /* _XTENSA_CACHEFLUSH_H */ + diff --git a/include/asm-xtensa/checksum.h b/include/asm-xtensa/checksum.h new file mode 100644 index 000000000000..1a00fad19929 --- /dev/null +++ b/include/asm-xtensa/checksum.h @@ -0,0 +1,264 @@ +/* + * include/asm-xtensa/checksum.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_CHECKSUM_H +#define _XTENSA_CHECKSUM_H + +#include +#include +#include + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +asmlinkage unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums, and handles user-space pointer exceptions correctly, when needed. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +asmlinkage unsigned int csum_partial_copy_generic( const char *src, char *dst, int len, int sum, + int *src_err_ptr, int *dst_err_ptr); + +/* + * Note: when you get a NULL pointer exception here this means someone + * passed in an incorrect kernel address to one of these functions. + * + * If you use these functions directly please don't forget the + * verify_area(). + */ +extern __inline__ +unsigned int csum_partial_copy_nocheck ( const char *src, char *dst, + int len, int sum) +{ + return csum_partial_copy_generic ( src, dst, len, sum, NULL, NULL); +} + +extern __inline__ +unsigned int csum_partial_copy_from_user ( const char *src, char *dst, + int len, int sum, int *err_ptr) +{ + return csum_partial_copy_generic ( src, dst, len, sum, err_ptr, NULL); +} + +/* + * These are the old (and unsafe) way of doing checksums, a warning message will be + * printed if they are used and an exeption occurs. + * + * these functions should go away after some time. + */ + +#define csum_partial_copy_fromuser csum_partial_copy +unsigned int csum_partial_copy( const char *src, char *dst, int len, int sum); + +/* + * Fold a partial checksum + */ + +static __inline__ unsigned int csum_fold(unsigned int sum) +{ + unsigned int __dummy; + __asm__("extui %1, %0, 16, 16\n\t" + "extui %0 ,%0, 0, 16\n\t" + "add %0, %0, %1\n\t" + "slli %1, %0, 16\n\t" + "add %0, %0, %1\n\t" + "extui %0, %0, 16, 16\n\t" + "neg %0, %0\n\t" + "addi %0, %0, -1\n\t" + "extui %0, %0, 0, 16\n\t" + : "=r" (sum), "=&r" (__dummy) + : "0" (sum)); + return sum; +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +static __inline__ unsigned short ip_fast_csum(unsigned char * iph, unsigned int ihl) +{ + unsigned int sum, tmp, endaddr; + + __asm__ __volatile__( + "sub %0, %0, %0\n\t" +#if XCHAL_HAVE_LOOPS + "loopgtz %2, 2f\n\t" +#else + "beqz %2, 2f\n\t" + "slli %4, %2, 2\n\t" + "add %4, %4, %1\n\t" + "0:\t" +#endif + "l32i %3, %1, 0\n\t" + "add %0, %0, %3\n\t" + "bgeu %0, %3, 1f\n\t" + "addi %0, %0, 1\n\t" + "1:\t" + "addi %1, %1, 4\n\t" +#if !XCHAL_HAVE_LOOPS + "blt %1, %4, 0b\n\t" +#endif + "2:\t" + /* Since the input registers which are loaded with iph and ihl + are modified, we must also specify them as outputs, or gcc + will assume they contain their original values. */ + : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmp), "=&r" (endaddr) + : "1" (iph), "2" (ihl)); + + return csum_fold(sum); +} + +static __inline__ unsigned long csum_tcpudp_nofold(unsigned long saddr, + unsigned long daddr, + unsigned short len, + unsigned short proto, + unsigned int sum) +{ + +#ifdef __XTENSA_EL__ + unsigned long len_proto = (ntohs(len)<<16)+proto*256; +#elif defined(__XTENSA_EB__) + unsigned long len_proto = (proto<<16)+len; +#else +# error processor byte order undefined! +#endif + __asm__("add %0, %0, %1\n\t" + "bgeu %0, %1, 1f\n\t" + "addi %0, %0, 1\n\t" + "1:\t" + "add %0, %0, %2\n\t" + "bgeu %0, %2, 1f\n\t" + "addi %0, %0, 1\n\t" + "1:\t" + "add %0, %0, %3\n\t" + "bgeu %0, %3, 1f\n\t" + "addi %0, %0, 1\n\t" + "1:\t" + : "=r" (sum), "=r" (len_proto) + : "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum)); + return sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static __inline__ unsigned short int csum_tcpudp_magic(unsigned long saddr, + unsigned long daddr, + unsigned short len, + unsigned short proto, + unsigned int sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ + +static __inline__ unsigned short ip_compute_csum(unsigned char * buff, int len) +{ + return csum_fold (csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +static __inline__ unsigned short int csum_ipv6_magic(struct in6_addr *saddr, + struct in6_addr *daddr, + __u32 len, + unsigned short proto, + unsigned int sum) +{ + unsigned int __dummy; + __asm__("l32i %1, %2, 0\n\t" + "add %0, %0, %1\n\t" + "bgeu %0, %1, 1f\n\t" + "addi %0, %0, 1\n\t" + "1:\t" + "l32i %1, %2, 4\n\t" + "add %0, %0, %1\n\t" + "bgeu %0, %1, 1f\n\t" + "addi %0, %0, 1\n\t" + "1:\t" + "l32i %1, %2, 8\n\t" + "add %0, %0, %1\n\t" + "bgeu %0, %1, 1f\n\t" + "addi %0, %0, 1\n\t" + "1:\t" + "l32i %1, %2, 12\n\t" + "add %0, %0, %1\n\t" + "bgeu %0, %1, 1f\n\t" + "addi %0, %0, 1\n\t" + "1:\t" + "l32i %1, %3, 0\n\t" + "add %0, %0, %1\n\t" + "bgeu %0, %1, 1f\n\t" + "addi %0, %0, 1\n\t" + "1:\t" + "l32i %1, %3, 4\n\t" + "add %0, %0, %1\n\t" + "bgeu %0, %1, 1f\n\t" + "addi %0, %0, 1\n\t" + "1:\t" + "l32i %1, %3, 8\n\t" + "add %0, %0, %1\n\t" + "bgeu %0, %1, 1f\n\t" + "addi %0, %0, 1\n\t" + "1:\t" + "l32i %1, %3, 12\n\t" + "add %0, %0, %1\n\t" + "bgeu %0, %1, 1f\n\t" + "addi %0, %0, 1\n\t" + "1:\t" + "add %0, %0, %4\n\t" + "bgeu %0, %4, 1f\n\t" + "addi %0, %0, 1\n\t" + "1:\t" + "add %0, %0, %5\n\t" + "bgeu %0, %5, 1f\n\t" + "addi %0, %0, 1\n\t" + "1:\t" + : "=r" (sum), "=&r" (__dummy) + : "r" (saddr), "r" (daddr), + "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)); + + return csum_fold(sum); +} + +/* + * Copy and checksum to user + */ +#define HAVE_CSUM_COPY_USER +static __inline__ unsigned int csum_and_copy_to_user (const char *src, char *dst, + int len, int sum, int *err_ptr) +{ + if (access_ok(VERIFY_WRITE, dst, len)) + return csum_partial_copy_generic(src, dst, len, sum, NULL, err_ptr); + + if (len) + *err_ptr = -EFAULT; + + return -1; /* invalid checksum */ +} +#endif diff --git a/include/asm-xtensa/coprocessor.h b/include/asm-xtensa/coprocessor.h new file mode 100644 index 000000000000..a91b96dc0efe --- /dev/null +++ b/include/asm-xtensa/coprocessor.h @@ -0,0 +1,70 @@ +/* + * include/asm-xtensa/cpextra.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_COPROCESSOR_H +#define _XTENSA_COPROCESSOR_H + +#include + +#define XTOFS(last_start,last_size,align) \ + ((last_start+last_size+align-1) & -align) + +#define XTENSA_CP_EXTRA_OFFSET 0 +#define XTENSA_CP_EXTRA_ALIGN XCHAL_EXTRA_SA_ALIGN + +#define XTENSA_CPE_CP0_OFFSET \ + XTOFS(XTENSA_CP_EXTRA_OFFSET, XCHAL_EXTRA_SA_SIZE, XCHAL_CP0_SA_ALIGN) +#define XTENSA_CPE_CP1_OFFSET \ + XTOFS(XTENSA_CPE_CP0_OFFSET, XCHAL_CP0_SA_SIZE, XCHAL_CP1_SA_ALIGN) +#define XTENSA_CPE_CP2_OFFSET \ + XTOFS(XTENSA_CPE_CP1_OFFSET, XCHAL_CP1_SA_SIZE, XCHAL_CP2_SA_ALIGN) +#define XTENSA_CPE_CP3_OFFSET \ + XTOFS(XTENSA_CPE_CP2_OFFSET, XCHAL_CP2_SA_SIZE, XCHAL_CP3_SA_ALIGN) +#define XTENSA_CPE_CP4_OFFSET \ + XTOFS(XTENSA_CPE_CP3_OFFSET, XCHAL_CP3_SA_SIZE, XCHAL_CP4_SA_ALIGN) +#define XTENSA_CPE_CP5_OFFSET \ + XTOFS(XTENSA_CPE_CP4_OFFSET, XCHAL_CP4_SA_SIZE, XCHAL_CP5_SA_ALIGN) +#define XTENSA_CPE_CP6_OFFSET \ + XTOFS(XTENSA_CPE_CP5_OFFSET, XCHAL_CP5_SA_SIZE, XCHAL_CP6_SA_ALIGN) +#define XTENSA_CPE_CP7_OFFSET \ + XTOFS(XTENSA_CPE_CP6_OFFSET, XCHAL_CP6_SA_SIZE, XCHAL_CP7_SA_ALIGN) +#define XTENSA_CP_EXTRA_SIZE \ + XTOFS(XTENSA_CPE_CP7_OFFSET, XCHAL_CP7_SA_SIZE, 16) + +#if XCHAL_CP_NUM > 0 +# ifndef __ASSEMBLY__ +/* + * Tasks that own contents of (last user) each coprocessor. + * Entries are 0 for not-owned or non-existent coprocessors. + * Note: The size of this structure is fixed to 8 bytes in entry.S + */ +typedef struct { + struct task_struct *owner; /* owner */ + int offset; /* offset in cpextra space. */ +} coprocessor_info_t; +# else +# define COPROCESSOR_INFO_OWNER 0 +# define COPROCESSOR_INFO_OFFSET 4 +# define COPROCESSOR_INFO_SIZE 8 +# endif +#endif + + +#ifndef __ASSEMBLY__ +# if XCHAL_CP_NUM > 0 +struct task_struct; +extern void release_coprocessors (struct task_struct*); +extern void save_coprocessor_registers(void*, int); +# else +# define release_coprocessors(task) +# endif +#endif + +#endif /* _XTENSA_COPROCESSOR_H */ diff --git a/include/asm-xtensa/cpumask.h b/include/asm-xtensa/cpumask.h new file mode 100644 index 000000000000..ebeede397db3 --- /dev/null +++ b/include/asm-xtensa/cpumask.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/cpumask.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_CPUMASK_H +#define _XTENSA_CPUMASK_H + +#include + +#endif /* _XTENSA_CPUMASK_H */ diff --git a/include/asm-xtensa/cputime.h b/include/asm-xtensa/cputime.h new file mode 100644 index 000000000000..a7fb864a50ae --- /dev/null +++ b/include/asm-xtensa/cputime.h @@ -0,0 +1,6 @@ +#ifndef _XTENSA_CPUTIME_H +#define _XTENSA_CPUTIME_H + +#include + +#endif /* _XTENSA_CPUTIME_H */ diff --git a/include/asm-xtensa/current.h b/include/asm-xtensa/current.h new file mode 100644 index 000000000000..8d1eb5d78649 --- /dev/null +++ b/include/asm-xtensa/current.h @@ -0,0 +1,38 @@ +/* + * include/asm-xtensa/current.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_CURRENT_H +#define _XTENSA_CURRENT_H + +#ifndef __ASSEMBLY__ + +#include + +struct task_struct; + +static inline struct task_struct *get_current(void) +{ + return current_thread_info()->task; +} + +#define current get_current() + +#else + +#define CURRENT_SHIFT 13 + +#define GET_CURRENT(reg,sp) \ + GET_THREAD_INFO(reg,sp); \ + l32i reg, reg, TI_TASK \ + +#endif + + +#endif /* XTENSA_CURRENT_H */ diff --git a/include/asm-xtensa/delay.h b/include/asm-xtensa/delay.h new file mode 100644 index 000000000000..6359c55e77a8 --- /dev/null +++ b/include/asm-xtensa/delay.h @@ -0,0 +1,50 @@ +/* + * include/asm-xtensa/delay.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + */ + +#ifndef _XTENSA_DELAY_H +#define _XTENSA_DELAY_H + +#include +#include +#include + +extern unsigned long loops_per_jiffy; + +extern __inline__ void __delay(unsigned long loops) +{ + /* 2 cycles per loop. */ + __asm__ __volatile__ ("1: addi %0, %0, -2; bgeui %0, 1, 1b" + : "=r" (loops) : "0" (loops)); +} + +static __inline__ u32 xtensa_get_ccount(void) +{ + u32 ccount; + asm volatile ("rsr %0, 234; # CCOUNT\n" : "=r" (ccount)); + return ccount; +} + +/* For SMP/NUMA systems, change boot_cpu_data to something like + * local_cpu_data->... where local_cpu_data points to the current + * cpu. */ + +static __inline__ void udelay (unsigned long usecs) +{ + unsigned long start = xtensa_get_ccount(); + unsigned long cycles = usecs * (loops_per_jiffy / (1000000UL / HZ)); + + /* Note: all variables are unsigned (can wrap around)! */ + while (((unsigned long)xtensa_get_ccount()) - start < cycles) + ; +} + +#endif + diff --git a/include/asm-xtensa/div64.h b/include/asm-xtensa/div64.h new file mode 100644 index 000000000000..c4a105776383 --- /dev/null +++ b/include/asm-xtensa/div64.h @@ -0,0 +1,19 @@ +/* + * include/asm-xtensa/div64.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_DIV64_H +#define _XTENSA_DIV64_H + +#define do_div(n,base) ({ \ + int __res = n % ((unsigned int) base); \ + n /= (unsigned int) base; \ + __res; }) + +#endif diff --git a/include/asm-xtensa/dma-mapping.h b/include/asm-xtensa/dma-mapping.h new file mode 100644 index 000000000000..e86a206f1209 --- /dev/null +++ b/include/asm-xtensa/dma-mapping.h @@ -0,0 +1,182 @@ +/* + * include/asm-xtensa/dma_mapping.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_DMA_MAPPING_H +#define _XTENSA_DMA_MAPPING_H + +#include +#include +#include +#include + +/* + * DMA-consistent mapping functions. + */ + +extern void *consistent_alloc(int, size_t, dma_addr_t, unsigned long); +extern void consistent_free(void*, size_t, dma_addr_t); +extern void consistent_sync(void*, size_t, int); + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, int flag); + +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + +static inline dma_addr_t +dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + consistent_sync(ptr, size, direction); + return virt_to_phys(ptr); +} + +static inline void +dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + +static inline int +dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + int i; + + BUG_ON(direction == DMA_NONE); + + for (i = 0; i < nents; i++, sg++ ) { + BUG_ON(!sg->page); + + sg->dma_address = page_to_phys(sg->page) + sg->offset; + consistent_sync(page_address(sg->page) + sg->offset, + sg->length, direction); + } + + return nents; +} + +static inline dma_addr_t +dma_map_page(struct device *dev, struct page *page, unsigned long offset, + size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + return (dma_addr_t)(page_to_pfn(page)) * PAGE_SIZE + offset; +} + +static inline void +dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + + +static inline void +dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); +} + +static inline void +dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + consistent_sync((void *)bus_to_virt(dma_handle), size, direction); +} + +static inline void +dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + consistent_sync((void *)bus_to_virt(dma_handle), size, direction); +} + +static inline void +dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + + consistent_sync((void *)bus_to_virt(dma_handle)+offset,size,direction); +} + +static inline void +dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + + consistent_sync((void *)bus_to_virt(dma_handle)+offset,size,direction); +} +static inline void +dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction dir) +{ + int i; + for (i = 0; i < nelems; i++, sg++) + consistent_sync(page_address(sg->page) + sg->offset, + sg->length, dir); +} + +static inline void +dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction dir) +{ + int i; + for (i = 0; i < nelems; i++, sg++) + consistent_sync(page_address(sg->page) + sg->offset, + sg->length, dir); +} +static inline int +dma_mapping_error(dma_addr_t dma_addr) +{ + return 0; +} + +static inline int +dma_supported(struct device *dev, u64 mask) +{ + return 1; +} + +static inline int +dma_set_mask(struct device *dev, u64 mask) +{ + if(!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + + *dev->dma_mask = mask; + + return 0; +} + +static inline int +dma_get_cache_alignment(void) +{ + return L1_CACHE_BYTES; +} + +#define dma_is_consistent(d) (1) + +static inline void +dma_cache_sync(void *vaddr, size_t size, + enum dma_data_direction direction) +{ + consistent_sync(vaddr, size, direction); +} + +#endif /* _XTENSA_DMA_MAPPING_H */ diff --git a/include/asm-xtensa/dma.h b/include/asm-xtensa/dma.h new file mode 100644 index 000000000000..1c22b0234586 --- /dev/null +++ b/include/asm-xtensa/dma.h @@ -0,0 +1,61 @@ +/* + * include/asm-xtensa/dma.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_DMA_H +#define _XTENSA_DMA_H + +#include +#include /* need byte IO */ +#include + +/* + * This is only to be defined if we have PC-like DMA. + * By default this is not true on an Xtensa processor, + * however on boards with a PCI bus, such functionality + * might be emulated externally. + * + * NOTE: there still exists driver code that assumes + * this is defined, eg. drivers/sound/soundcard.c (as of 2.4). + */ +#define MAX_DMA_CHANNELS 8 + +/* + * The maximum virtual address to which DMA transfers + * can be performed on this platform. + * + * NOTE: This is board (platform) specific, not processor-specific! + * + * NOTE: This assumes DMA transfers can only be performed on + * the section of physical memory contiguously mapped in virtual + * space for the kernel. For the Xtensa architecture, this + * means the maximum possible size of this DMA area is + * the size of the statically mapped kernel segment + * (XCHAL_KSEG_{CACHED,BYPASS}_SIZE), ie. 128 MB. + * + * NOTE: When the entire KSEG area is DMA capable, we substract + * one from the max address so that the virt_to_phys() macro + * works correctly on the address (otherwise the address + * enters another area, and virt_to_phys() may not return + * the value desired). + */ +#define MAX_DMA_ADDRESS (PAGE_OFFSET + XCHAL_KSEG_CACHED_SIZE - 1) + +/* Reserve and release a DMA channel */ +extern int request_dma(unsigned int dmanr, const char * device_id); +extern void free_dma(unsigned int dmanr); + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + + +#endif diff --git a/include/asm-xtensa/elf.h b/include/asm-xtensa/elf.h new file mode 100644 index 000000000000..64f1f53874fe --- /dev/null +++ b/include/asm-xtensa/elf.h @@ -0,0 +1,222 @@ +/* + * include/asm-xtensa/elf.h + * + * ELF register definitions + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_ELF_H +#define _XTENSA_ELF_H + +#include +#include +#include + +/* Xtensa processor ELF architecture-magic number */ + +#define EM_XTENSA 94 +#define EM_XTENSA_OLD 0xABC7 + +/* ELF register definitions. This is needed for core dump support. */ + +/* + * elf_gregset_t contains the application-level state in the following order: + * Processor info: config_version, cpuxy + * Processor state: pc, ps, exccause, excvaddr, wb, ws, + * lbeg, lend, lcount, sar + * GP regs: ar0 - arXX + */ + +typedef unsigned long elf_greg_t; + +typedef struct { + elf_greg_t xchal_config_id0; + elf_greg_t xchal_config_id1; + elf_greg_t cpux; + elf_greg_t cpuy; + elf_greg_t pc; + elf_greg_t ps; + elf_greg_t exccause; + elf_greg_t excvaddr; + elf_greg_t windowbase; + elf_greg_t windowstart; + elf_greg_t lbeg; + elf_greg_t lend; + elf_greg_t lcount; + elf_greg_t sar; + elf_greg_t syscall; + elf_greg_t ar[XCHAL_NUM_AREGS]; +} xtensa_gregset_t; + +#define ELF_NGREG (sizeof(xtensa_gregset_t) / sizeof(elf_greg_t)) + +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +/* + * Compute the size of the coprocessor and extra state layout (register info) + * table (in bytes). + * This is actually the maximum size of the table, as opposed to the size, + * which is available from the _xtensa_reginfo_table_size global variable. + * + * (See also arch/xtensa/kernel/coprocessor.S) + * + */ + +#ifndef XCHAL_EXTRA_SA_CONTENTS_LIBDB_NUM +# define XTENSA_CPE_LTABLE_SIZE 0 +#else +# define XTENSA_CPE_SEGMENT(num) (num ? (1+num) : 0) +# define XTENSA_CPE_LTABLE_ENTRIES \ + ( XTENSA_CPE_SEGMENT(XCHAL_EXTRA_SA_CONTENTS_LIBDB_NUM) \ + + XTENSA_CPE_SEGMENT(XCHAL_CP0_SA_CONTENTS_LIBDB_NUM) \ + + XTENSA_CPE_SEGMENT(XCHAL_CP1_SA_CONTENTS_LIBDB_NUM) \ + + XTENSA_CPE_SEGMENT(XCHAL_CP2_SA_CONTENTS_LIBDB_NUM) \ + + XTENSA_CPE_SEGMENT(XCHAL_CP3_SA_CONTENTS_LIBDB_NUM) \ + + XTENSA_CPE_SEGMENT(XCHAL_CP4_SA_CONTENTS_LIBDB_NUM) \ + + XTENSA_CPE_SEGMENT(XCHAL_CP5_SA_CONTENTS_LIBDB_NUM) \ + + XTENSA_CPE_SEGMENT(XCHAL_CP6_SA_CONTENTS_LIBDB_NUM) \ + + XTENSA_CPE_SEGMENT(XCHAL_CP7_SA_CONTENTS_LIBDB_NUM) \ + + 1 /* final entry */ \ + ) +# define XTENSA_CPE_LTABLE_SIZE (XTENSA_CPE_LTABLE_ENTRIES * 8) +#endif + + +/* + * Instantiations of the elf_fpregset_t type contain, in most + * architectures, the floating point (FPU) register set. + * For Xtensa, this type is extended to contain all custom state, + * ie. coprocessor and "extra" (non-coprocessor) state (including, + * for example, TIE-defined states and register files; as well + * as other optional processor state). + * This includes FPU state if a floating-point coprocessor happens + * to have been configured within the Xtensa processor. + * + * TOTAL_FPREGS_SIZE is the required size (without rounding) + * of elf_fpregset_t. It provides space for the following: + * + * a) 32-bit mask of active coprocessors for this task (similar + * to CPENABLE in single-threaded Xtensa processor systems) + * + * b) table describing the layout of custom states (ie. of + * individual registers, etc) within the save areas + * + * c) save areas for each coprocessor and for non-coprocessor + * ("extra") state + * + * Note that save areas may require up to 16-byte alignment when + * accessed by save/restore sequences. We do not need to ensure + * such alignment in an elf_fpregset_t structure because custom + * state is not directly loaded/stored into it; rather, save area + * contents are copied to elf_fpregset_t from the active save areas + * (see 'struct task_struct' definition in processor.h for that) + * using memcpy(). But we do allow space for such alignment, + * to allow optimizations of layout and copying. + */ + +#define TOTAL_FPREGS_SIZE \ + (4 + XTENSA_CPE_LTABLE_SIZE + XTENSA_CP_EXTRA_SIZE) +#define ELF_NFPREG \ + ((TOTAL_FPREGS_SIZE + sizeof(elf_fpreg_t) - 1) / sizeof(elf_fpreg_t)) + +typedef unsigned int elf_fpreg_t; +typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; + +#define ELF_CORE_COPY_REGS(_eregs, _pregs) \ + xtensa_elf_core_copy_regs (&_eregs, _pregs); + +extern void xtensa_elf_core_copy_regs (xtensa_gregset_t *, struct pt_regs *); + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ + +#define elf_check_arch(x) ( ( (x)->e_machine == EM_XTENSA ) || \ + ( (x)->e_machine == EM_XTENSA_OLD ) ) + +/* + * These are used to set parameters in the core dumps. + */ + +#ifdef __XTENSA_EL__ +# define ELF_DATA ELFDATA2LSB +#elif defined(__XTENSA_EB__) +# define ELF_DATA ELFDATA2MSB +#else +# error processor byte order undefined! +#endif + +#define ELF_CLASS ELFCLASS32 +#define ELF_ARCH EM_XTENSA + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE PAGE_SIZE + +/* + * This is the location that an ET_DYN program is loaded if exec'ed. Typical + * use of this is to invoke "./ld.so someprog" to test out a new version of + * the loader. We need to make sure that it is out of the way of the program + * that it will "exec", and that there is sufficient room for the brk. + */ + +#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) + +/* + * This yields a mask that user programs can use to figure out what + * instruction set this CPU supports. This could be done in user space, + * but it's not easy, and we've already done it here. + */ + +#define ELF_HWCAP (0) + +/* + * This yields a string that ld.so will use to load implementation + * specific libraries for optimization. This is more specific in + * intent than poking at uname or /proc/cpuinfo. + * For the moment, we have only optimizations for the Intel generations, + * but that could change... + */ + +#define ELF_PLATFORM (NULL) + +/* + * The Xtensa processor ABI says that when the program starts, a2 + * contains a pointer to a function which might be registered using + * `atexit'. This provides a mean for the dynamic linker to call + * DT_FINI functions for shared libraries that have been loaded before + * the code runs. + * + * A value of 0 tells we have no such handler. + * + * We might as well make sure everything else is cleared too (except + * for the stack pointer in a1), just to make things more + * deterministic. Also, clearing a0 terminates debugger backtraces. + */ + +#define ELF_PLAT_INIT(_r, load_addr) \ + do { _r->areg[0]=0; /*_r->areg[1]=0;*/ _r->areg[2]=0; _r->areg[3]=0; \ + _r->areg[4]=0; _r->areg[5]=0; _r->areg[6]=0; _r->areg[7]=0; \ + _r->areg[8]=0; _r->areg[9]=0; _r->areg[10]=0; _r->areg[11]=0; \ + _r->areg[12]=0; _r->areg[13]=0; _r->areg[14]=0; _r->areg[15]=0; \ + } while (0) + +#ifdef __KERNEL__ + +#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) + +extern void do_copy_regs (xtensa_gregset_t*, struct pt_regs*, + struct task_struct*); +extern void do_restore_regs (xtensa_gregset_t*, struct pt_regs*, + struct task_struct*); +extern void do_save_fpregs (elf_fpregset_t*, struct pt_regs*, + struct task_struct*); +extern int do_restore_fpregs (elf_fpregset_t*, struct pt_regs*, + struct task_struct*); + +#endif /* __KERNEL__ */ +#endif /* _XTENSA_ELF_H */ diff --git a/include/asm-xtensa/errno.h b/include/asm-xtensa/errno.h new file mode 100644 index 000000000000..ced5194d2750 --- /dev/null +++ b/include/asm-xtensa/errno.h @@ -0,0 +1,142 @@ +/* + * include/asm-xtensa/errno.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2002 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_ERRNO_H +#define _XTENSA_ERRNO_H + +#define EPERM 1 /* Operation not permitted */ +#define ENOENT 2 /* No such file or directory */ +#define ESRCH 3 /* No such process */ +#define EINTR 4 /* Interrupted system call */ +#define EIO 5 /* I/O error */ +#define ENXIO 6 /* No such device or address */ +#define E2BIG 7 /* Arg list too long */ +#define ENOEXEC 8 /* Exec format error */ +#define EBADF 9 /* Bad file number */ +#define ECHILD 10 /* No child processes */ +#define EAGAIN 11 /* Try again */ +#define ENOMEM 12 /* Out of memory */ +#define EACCES 13 /* Permission denied */ +#define EFAULT 14 /* Bad address */ +#define ENOTBLK 15 /* Block device required */ +#define EBUSY 16 /* Device or resource busy */ +#define EEXIST 17 /* File exists */ +#define EXDEV 18 /* Cross-device link */ +#define ENODEV 19 /* No such device */ +#define ENOTDIR 20 /* Not a directory */ +#define EISDIR 21 /* Is a directory */ +#define EINVAL 22 /* Invalid argument */ +#define ENFILE 23 /* File table overflow */ +#define EMFILE 24 /* Too many open files */ +#define ENOTTY 25 /* Not a typewriter */ +#define ETXTBSY 26 /* Text file busy */ +#define EFBIG 27 /* File too large */ +#define ENOSPC 28 /* No space left on device */ +#define ESPIPE 29 /* Illegal seek */ +#define EROFS 30 /* Read-only file system */ +#define EMLINK 31 /* Too many links */ +#define EPIPE 32 /* Broken pipe */ +#define EDOM 33 /* Math argument out of domain of func */ +#define ERANGE 34 /* Math result not representable */ +#define EDEADLK 35 /* Resource deadlock would occur */ +#define ENAMETOOLONG 36 /* File name too long */ +#define ENOLCK 37 /* No record locks available */ +#define ENOSYS 38 /* Function not implemented */ +#define ENOTEMPTY 39 /* Directory not empty */ +#define ELOOP 40 /* Too many symbolic links encountered */ +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define ENOMSG 42 /* No message of desired type */ +#define EIDRM 43 /* Identifier removed */ +#define ECHRNG 44 /* Channel number out of range */ +#define EL2NSYNC 45 /* Level 2 not synchronized */ +#define EL3HLT 46 /* Level 3 halted */ +#define EL3RST 47 /* Level 3 reset */ +#define ELNRNG 48 /* Link number out of range */ +#define EUNATCH 49 /* Protocol driver not attached */ +#define ENOCSI 50 /* No CSI structure available */ +#define EL2HLT 51 /* Level 2 halted */ +#define EBADE 52 /* Invalid exchange */ +#define EBADR 53 /* Invalid request descriptor */ +#define EXFULL 54 /* Exchange full */ +#define ENOANO 55 /* No anode */ +#define EBADRQC 56 /* Invalid request code */ +#define EBADSLT 57 /* Invalid slot */ + +#define EDEADLOCK EDEADLK + +#define EBFONT 59 /* Bad font file format */ +#define ENOSTR 60 /* Device not a stream */ +#define ENODATA 61 /* No data available */ +#define ETIME 62 /* Timer expired */ +#define ENOSR 63 /* Out of streams resources */ +#define ENONET 64 /* Machine is not on the network */ +#define ENOPKG 65 /* Package not installed */ +#define EREMOTE 66 /* Object is remote */ +#define ENOLINK 67 /* Link has been severed */ +#define EADV 68 /* Advertise error */ +#define ESRMNT 69 /* Srmount error */ +#define ECOMM 70 /* Communication error on send */ +#define EPROTO 71 /* Protocol error */ +#define EMULTIHOP 72 /* Multihop attempted */ +#define EDOTDOT 73 /* RFS specific error */ +#define EBADMSG 74 /* Not a data message */ +#define EOVERFLOW 75 /* Value too large for defined data type */ +#define ENOTUNIQ 76 /* Name not unique on network */ +#define EBADFD 77 /* File descriptor in bad state */ +#define EREMCHG 78 /* Remote address changed */ +#define ELIBACC 79 /* Can not access a needed shared library */ +#define ELIBBAD 80 /* Accessing a corrupted shared library */ +#define ELIBSCN 81 /* .lib section in a.out corrupted */ +#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 83 /* Cannot exec a shared library directly */ +#define EILSEQ 84 /* Illegal byte sequence */ +#define ERESTART 85 /* Interrupted system call should be restarted */ +#define ESTRPIPE 86 /* Streams pipe error */ +#define EUSERS 87 /* Too many users */ +#define ENOTSOCK 88 /* Socket operation on non-socket */ +#define EDESTADDRREQ 89 /* Destination address required */ +#define EMSGSIZE 90 /* Message too long */ +#define EPROTOTYPE 91 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 92 /* Protocol not available */ +#define EPROTONOSUPPORT 93 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ +#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 96 /* Protocol family not supported */ +#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ +#define EADDRINUSE 98 /* Address already in use */ +#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ +#define ENETDOWN 100 /* Network is down */ +#define ENETUNREACH 101 /* Network is unreachable */ +#define ENETRESET 102 /* Network dropped connection because of reset */ +#define ECONNABORTED 103 /* Software caused connection abort */ +#define ECONNRESET 104 /* Connection reset by peer */ +#define ENOBUFS 105 /* No buffer space available */ +#define EISCONN 106 /* Transport endpoint is already connected */ +#define ENOTCONN 107 /* Transport endpoint is not connected */ +#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 109 /* Too many references: cannot splice */ +#define ETIMEDOUT 110 /* Connection timed out */ +#define ECONNREFUSED 111 /* Connection refused */ +#define EHOSTDOWN 112 /* Host is down */ +#define EHOSTUNREACH 113 /* No route to host */ +#define EALREADY 114 /* Operation already in progress */ +#define EINPROGRESS 115 /* Operation now in progress */ +#define ESTALE 116 /* Stale NFS file handle */ +#define EUCLEAN 117 /* Structure needs cleaning */ +#define ENOTNAM 118 /* Not a XENIX named type file */ +#define ENAVAIL 119 /* No XENIX semaphores available */ +#define EISNAM 120 /* Is a named type file */ +#define EREMOTEIO 121 /* Remote I/O error */ +#define EDQUOT 122 /* Quota exceeded */ + +#define ENOMEDIUM 123 /* No medium found */ +#define EMEDIUMTYPE 124 /* Wrong medium type */ + +#endif /* _XTENSA_ERRNO_H */ diff --git a/include/asm-xtensa/fcntl.h b/include/asm-xtensa/fcntl.h new file mode 100644 index 000000000000..48876bb727d2 --- /dev/null +++ b/include/asm-xtensa/fcntl.h @@ -0,0 +1,101 @@ +/* + * include/asm-xtensa/fcntl.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1996, 1997, 1998 by Ralf Baechle + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_FCNTL_H +#define _XTENSA_FCNTL_H + +/* open/fcntl - O_SYNC is only implemented on blocks devices and on files + located on an ext2 file system */ +#define O_ACCMODE 0x0003 +#define O_RDONLY 0x0000 +#define O_WRONLY 0x0001 +#define O_RDWR 0x0002 +#define O_APPEND 0x0008 +#define O_SYNC 0x0010 +#define O_NONBLOCK 0x0080 +#define O_CREAT 0x0100 /* not fcntl */ +#define O_TRUNC 0x0200 /* not fcntl */ +#define O_EXCL 0x0400 /* not fcntl */ +#define O_NOCTTY 0x0800 /* not fcntl */ +#define FASYNC 0x1000 /* fcntl, for BSD compatibility */ +#define O_LARGEFILE 0x2000 /* allow large file opens - currently ignored */ +#define O_DIRECT 0x8000 /* direct disk access hint - currently ignored*/ +#define O_DIRECTORY 0x10000 /* must be a directory */ +#define O_NOFOLLOW 0x20000 /* don't follow links */ +#define O_NOATIME 0x100000 + +#define O_NDELAY O_NONBLOCK + +#define F_DUPFD 0 /* dup */ +#define F_GETFD 1 /* get close_on_exec */ +#define F_SETFD 2 /* set/clear close_on_exec */ +#define F_GETFL 3 /* get file->f_flags */ +#define F_SETFL 4 /* set file->f_flags */ +#define F_GETLK 14 +#define F_GETLK64 15 +#define F_SETLK 6 +#define F_SETLKW 7 +#define F_SETLK64 16 +#define F_SETLKW64 17 + +#define F_SETOWN 24 /* for sockets. */ +#define F_GETOWN 23 /* for sockets. */ +#define F_SETSIG 10 /* for sockets. */ +#define F_GETSIG 11 /* for sockets. */ + +/* for F_[GET|SET]FL */ +#define FD_CLOEXEC 1 /* actually anything with low bit set goes */ + +/* for posix fcntl() and lockf() */ +#define F_RDLCK 0 +#define F_WRLCK 1 +#define F_UNLCK 2 + +/* for old implementation of bsd flock () */ +#define F_EXLCK 4 /* or 3 */ +#define F_SHLCK 8 /* or 4 */ + +/* for leases */ +#define F_INPROGRESS 16 + +/* operations for bsd flock(), also used by the kernel implementation */ +#define LOCK_SH 1 /* shared lock */ +#define LOCK_EX 2 /* exclusive lock */ +#define LOCK_NB 4 /* or'd with one of the above to prevent + blocking */ +#define LOCK_UN 8 /* remove lock */ + +#define LOCK_MAND 32 /* This is a mandatory flock ... */ +#define LOCK_READ 64 /* which allows concurrent read operations */ +#define LOCK_WRITE 128 /* which allows concurrent write operations */ +#define LOCK_RW 192 /* which allows concurrent read & write ops */ + +typedef struct flock { + short l_type; + short l_whence; + __kernel_off_t l_start; + __kernel_off_t l_len; + long l_sysid; + __kernel_pid_t l_pid; + long pad[4]; +} flock_t; + +struct flock64 { + short l_type; + short l_whence; + __kernel_off_t l_start; + __kernel_off_t l_len; + pid_t l_pid; +}; + +#define F_LINUX_SPECIFIC_BASE 1024 + +#endif /* _XTENSA_FCNTL_H */ diff --git a/include/asm-xtensa/fixmap.h b/include/asm-xtensa/fixmap.h new file mode 100644 index 000000000000..4423b8ad4954 --- /dev/null +++ b/include/asm-xtensa/fixmap.h @@ -0,0 +1,252 @@ +/* + * include/asm-xtensa/fixmap.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_FIXMAP_H +#define _XTENSA_FIXMAP_H + +#include + +#ifdef CONFIG_MMU + +/* + * Here we define all the compile-time virtual addresses. + */ + +#if XCHAL_SEG_MAPPABLE_VADDR != 0 +# error "Current port requires virtual user space starting at 0" +#endif +#if XCHAL_SEG_MAPPABLE_SIZE < 0x80000000 +# error "Current port requires at least 0x8000000 bytes for user space" +#endif + +/* Verify instruction/data ram/rom and xlmi don't overlay vmalloc space. */ + +#define __IN_VMALLOC(addr) \ + (((addr) >= VMALLOC_START) && ((addr) < VMALLOC_END)) +#define __SPAN_VMALLOC(start,end) \ + (((start) < VMALLOC_START) && ((end) >= VMALLOC_END)) +#define INSIDE_VMALLOC(start,end) \ + (__IN_VMALLOC((start)) || __IN_VMALLOC(end) || __SPAN_VMALLOC((start),(end))) + +#if XCHAL_NUM_INSTROM +# if XCHAL_NUM_INSTROM == 1 +# if INSIDE_VMALLOC(XCHAL_INSTROM0_VADDR,XCHAL_INSTROM0_VADDR+XCHAL_INSTROM0_SIZE) +# error vmalloc range conflicts with instrom0 +# endif +# endif +# if XCHAL_NUM_INSTROM == 2 +# if INSIDE_VMALLOC(XCHAL_INSTROM1_VADDR,XCHAL_INSTROM1_VADDR+XCHAL_INSTROM1_SIZE) +# error vmalloc range conflicts with instrom1 +# endif +# endif +#endif + +#if XCHAL_NUM_INSTRAM +# if XCHAL_NUM_INSTRAM == 1 +# if INSIDE_VMALLOC(XCHAL_INSTRAM0_VADDR,XCHAL_INSTRAM0_VADDR+XCHAL_INSTRAM0_SIZE) +# error vmalloc range conflicts with instram0 +# endif +# endif +# if XCHAL_NUM_INSTRAM == 2 +# if INSIDE_VMALLOC(XCHAL_INSTRAM1_VADDR,XCHAL_INSTRAM1_VADDR+XCHAL_INSTRAM1_SIZE) +# error vmalloc range conflicts with instram1 +# endif +# endif +#endif + +#if XCHAL_NUM_DATAROM +# if XCHAL_NUM_DATAROM == 1 +# if INSIDE_VMALLOC(XCHAL_DATAROM0_VADDR,XCHAL_DATAROM0_VADDR+XCHAL_DATAROM0_SIZE) +# error vmalloc range conflicts with datarom0 +# endif +# endif +# if XCHAL_NUM_DATAROM == 2 +# if INSIDE_VMALLOC(XCHAL_DATAROM1_VADDR,XCHAL_DATAROM1_VADDR+XCHAL_DATAROM1_SIZE) +# error vmalloc range conflicts with datarom1 +# endif +# endif +#endif + +#if XCHAL_NUM_DATARAM +# if XCHAL_NUM_DATARAM == 1 +# if INSIDE_VMALLOC(XCHAL_DATARAM0_VADDR,XCHAL_DATARAM0_VADDR+XCHAL_DATARAM0_SIZE) +# error vmalloc range conflicts with dataram0 +# endif +# endif +# if XCHAL_NUM_DATARAM == 2 +# if INSIDE_VMALLOC(XCHAL_DATARAM1_VADDR,XCHAL_DATARAM1_VADDR+XCHAL_DATARAM1_SIZE) +# error vmalloc range conflicts with dataram1 +# endif +# endif +#endif + +#if XCHAL_NUM_XLMI +# if XCHAL_NUM_XLMI == 1 +# if INSIDE_VMALLOC(XCHAL_XLMI0_VADDR,XCHAL_XLMI0_VADDR+XCHAL_XLMI0_SIZE) +# error vmalloc range conflicts with xlmi0 +# endif +# endif +# if XCHAL_NUM_XLMI == 2 +# if INSIDE_VMALLOC(XCHAL_XLMI1_VADDR,XCHAL_XLMI1_VADDR+XCHAL_XLMI1_SIZE) +# error vmalloc range conflicts with xlmi1 +# endif +# endif +#endif + +#if (XCHAL_NUM_INSTROM > 2) || \ + (XCHAL_NUM_INSTRAM > 2) || \ + (XCHAL_NUM_DATARAM > 2) || \ + (XCHAL_NUM_DATAROM > 2) || \ + (XCHAL_NUM_XLMI > 2) +# error Insufficient checks on vmalloc above for more than 2 devices +#endif + +/* + * USER_VM_SIZE does not necessarily equal TASK_SIZE. We bumped + * TASK_SIZE down to 0x4000000 to simplify the handling of windowed + * call instructions (currently limited to a range of 1 GByte). User + * tasks may very well reclaim the VM space from 0x40000000 to + * 0x7fffffff in the future, so we do not want the kernel becoming + * accustomed to having any of its stuff (e.g., page tables) in this + * region. This VM region is no-man's land for now. + */ + +#define USER_VM_START XCHAL_SEG_MAPPABLE_VADDR +#define USER_VM_SIZE 0x80000000 + +/* Size of page table: */ + +#define PGTABLE_SIZE_BITS (32 - XCHAL_MMU_MIN_PTE_PAGE_SIZE + 2) +#define PGTABLE_SIZE (1L << PGTABLE_SIZE_BITS) + +/* All kernel-mappable space: */ + +#define KERNEL_ALLMAP_START (USER_VM_START + USER_VM_SIZE) +#define KERNEL_ALLMAP_SIZE (XCHAL_SEG_MAPPABLE_SIZE - KERNEL_ALLMAP_START) + +/* Carve out page table at start of kernel-mappable area: */ + +#if KERNEL_ALLMAP_SIZE < PGTABLE_SIZE +#error "Gimme some space for page table!" +#endif +#define PGTABLE_START KERNEL_ALLMAP_START + +/* Remaining kernel-mappable space: */ + +#define KERNEL_MAPPED_START (KERNEL_ALLMAP_START + PGTABLE_SIZE) +#define KERNEL_MAPPED_SIZE (KERNEL_ALLMAP_SIZE - PGTABLE_SIZE) + +#if KERNEL_MAPPED_SIZE < 0x01000000 /* 16 MB is arbitrary for now */ +# error "Shouldn't the kernel have at least *some* mappable space?" +#endif + +#define MAX_LOW_MEMORY XCHAL_KSEG_CACHED_SIZE + +#endif + +/* + * Some constants used elsewhere, but perhaps only in Xtensa header + * files, so maybe we can get rid of some and access compile-time HAL + * directly... + * + * Note: We assume that system RAM is located at the very start of the + * kernel segments !! + */ +#define KERNEL_VM_LOW XCHAL_KSEG_CACHED_VADDR +#define KERNEL_VM_HIGH XCHAL_KSEG_BYPASS_VADDR +#define KERNEL_SPACE XCHAL_KSEG_CACHED_VADDR + +/* + * Returns the physical/virtual addresses of the kernel space + * (works with the cached kernel segment only, which is the + * one normally used for kernel operation). + */ + +/* PHYSICAL BYPASS CACHED + * + * bypass vaddr bypass paddr * cached vaddr + * cached vaddr cached paddr bypass vaddr * + * bypass paddr * bypass vaddr cached vaddr + * cached paddr * bypass vaddr cached vaddr + * other * * * + */ + +#define PHYSADDR(a) \ +(((unsigned)(a) >= XCHAL_KSEG_BYPASS_VADDR \ + && (unsigned)(a) < XCHAL_KSEG_BYPASS_VADDR + XCHAL_KSEG_BYPASS_SIZE) ? \ + (unsigned)(a) - XCHAL_KSEG_BYPASS_VADDR + XCHAL_KSEG_BYPASS_PADDR : \ + ((unsigned)(a) >= XCHAL_KSEG_CACHED_VADDR \ + && (unsigned)(a) < XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_CACHED_SIZE) ? \ + (unsigned)(a) - XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_CACHED_PADDR : \ + (unsigned)(a)) + +#define BYPASS_ADDR(a) \ +(((unsigned)(a) >= XCHAL_KSEG_BYPASS_PADDR \ + && (unsigned)(a) < XCHAL_KSEG_BYPASS_PADDR + XCHAL_KSEG_BYPASS_SIZE) ? \ + (unsigned)(a) - XCHAL_KSEG_BYPASS_PADDR + XCHAL_KSEG_BYPASS_VADDR : \ + ((unsigned)(a) >= XCHAL_KSEG_CACHED_PADDR \ + && (unsigned)(a) < XCHAL_KSEG_CACHED_PADDR + XCHAL_KSEG_CACHED_SIZE) ? \ + (unsigned)(a) - XCHAL_KSEG_CACHED_PADDR + XCHAL_KSEG_BYPASS_VADDR : \ + ((unsigned)(a) >= XCHAL_KSEG_CACHED_VADDR \ + && (unsigned)(a) < XCHAL_KSEG_CACHED_VADDR+XCHAL_KSEG_CACHED_SIZE)? \ + (unsigned)(a) - XCHAL_KSEG_CACHED_VADDR+XCHAL_KSEG_BYPASS_VADDR: \ + (unsigned)(a)) + +#define CACHED_ADDR(a) \ +(((unsigned)(a) >= XCHAL_KSEG_BYPASS_PADDR \ + && (unsigned)(a) < XCHAL_KSEG_BYPASS_PADDR + XCHAL_KSEG_BYPASS_SIZE) ? \ + (unsigned)(a) - XCHAL_KSEG_BYPASS_PADDR + XCHAL_KSEG_CACHED_VADDR : \ + ((unsigned)(a) >= XCHAL_KSEG_CACHED_PADDR \ + && (unsigned)(a) < XCHAL_KSEG_CACHED_PADDR + XCHAL_KSEG_CACHED_SIZE) ? \ + (unsigned)(a) - XCHAL_KSEG_CACHED_PADDR + XCHAL_KSEG_CACHED_VADDR : \ + ((unsigned)(a) >= XCHAL_KSEG_BYPASS_VADDR \ + && (unsigned)(a) < XCHAL_KSEG_BYPASS_VADDR+XCHAL_KSEG_BYPASS_SIZE) ? \ + (unsigned)(a) - XCHAL_KSEG_BYPASS_VADDR+XCHAL_KSEG_CACHED_VADDR : \ + (unsigned)(a)) + +#define PHYSADDR_IO(a) \ +(((unsigned)(a) >= XCHAL_KIO_BYPASS_VADDR \ + && (unsigned)(a) < XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_BYPASS_SIZE) ? \ + (unsigned)(a) - XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_BYPASS_PADDR : \ + ((unsigned)(a) >= XCHAL_KIO_CACHED_VADDR \ + && (unsigned)(a) < XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_CACHED_SIZE) ? \ + (unsigned)(a) - XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_CACHED_PADDR : \ + (unsigned)(a)) + +#define BYPASS_ADDR_IO(a) \ +(((unsigned)(a) >= XCHAL_KIO_BYPASS_PADDR \ + && (unsigned)(a) < XCHAL_KIO_BYPASS_PADDR + XCHAL_KIO_BYPASS_SIZE) ? \ + (unsigned)(a) - XCHAL_KIO_BYPASS_PADDR + XCHAL_KIO_BYPASS_VADDR : \ + ((unsigned)(a) >= XCHAL_KIO_CACHED_PADDR \ + && (unsigned)(a) < XCHAL_KIO_CACHED_PADDR + XCHAL_KIO_CACHED_SIZE) ? \ + (unsigned)(a) - XCHAL_KIO_CACHED_PADDR + XCHAL_KIO_BYPASS_VADDR : \ + ((unsigned)(a) >= XCHAL_KIO_CACHED_VADDR \ + && (unsigned)(a) < XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_CACHED_SIZE) ? \ + (unsigned)(a) - XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_BYPASS_VADDR : \ + (unsigned)(a)) + +#define CACHED_ADDR_IO(a) \ +(((unsigned)(a) >= XCHAL_KIO_BYPASS_PADDR \ + && (unsigned)(a) < XCHAL_KIO_BYPASS_PADDR + XCHAL_KIO_BYPASS_SIZE) ? \ + (unsigned)(a) - XCHAL_KIO_BYPASS_PADDR + XCHAL_KIO_CACHED_VADDR : \ + ((unsigned)(a) >= XCHAL_KIO_CACHED_PADDR \ + && (unsigned)(a) < XCHAL_KIO_CACHED_PADDR + XCHAL_KIO_CACHED_SIZE) ? \ + (unsigned)(a) - XCHAL_KIO_CACHED_PADDR + XCHAL_KIO_CACHED_VADDR : \ + ((unsigned)(a) >= XCHAL_KIO_BYPASS_VADDR \ + && (unsigned)(a) < XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_BYPASS_SIZE) ? \ + (unsigned)(a) - XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_CACHED_VADDR : \ + (unsigned)(a)) + +#endif /* _XTENSA_ADDRSPACE_H */ + + + + + diff --git a/include/asm-xtensa/hardirq.h b/include/asm-xtensa/hardirq.h new file mode 100644 index 000000000000..e07c76c36b95 --- /dev/null +++ b/include/asm-xtensa/hardirq.h @@ -0,0 +1,28 @@ +/* + * include/asm-xtensa/hardirq.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2002 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_HARDIRQ_H +#define _XTENSA_HARDIRQ_H + +#include +#include +#include + +/* headers.S is sensitive to the offsets of these fields */ +typedef struct { + unsigned int __softirq_pending; + unsigned int __syscall_count; + struct task_struct * __ksoftirqd_task; /* waitqueue is too large */ + unsigned int __nmi_count; /* arch dependent */ +} ____cacheline_aligned irq_cpustat_t; + +#include /* Standard mappings for irq_cpustat_t above */ + +#endif /* _XTENSA_HARDIRQ_H */ diff --git a/include/asm-xtensa/hdreg.h b/include/asm-xtensa/hdreg.h new file mode 100644 index 000000000000..64b80607b80d --- /dev/null +++ b/include/asm-xtensa/hdreg.h @@ -0,0 +1,17 @@ +/* + * include/asm-xtensa/hdreg.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2002 - 2005 Tensilica Inc. + * Copyright (C) 1994-1996 Linus Torvalds & authors + */ + +#ifndef _XTENSA_HDREG_H +#define _XTENSA_HDREG_H + +typedef unsigned int ide_ioreg_t; + +#endif diff --git a/include/asm-xtensa/highmem.h b/include/asm-xtensa/highmem.h new file mode 100644 index 000000000000..0a046ca5a687 --- /dev/null +++ b/include/asm-xtensa/highmem.h @@ -0,0 +1,17 @@ +/* + * include/asm-xtensa/highmem.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2003 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_HIGHMEM_H +#define _XTENSA_HIGHMEM_H + +extern void flush_cache_kmaps(void); + +#endif + diff --git a/include/asm-xtensa/hw_irq.h b/include/asm-xtensa/hw_irq.h new file mode 100644 index 000000000000..ccf436249eaa --- /dev/null +++ b/include/asm-xtensa/hw_irq.h @@ -0,0 +1,18 @@ +/* + * include/asm-xtensa/hw_irq.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2002 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_HW_IRQ_H +#define _XTENSA_HW_IRQ_H + +static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) +{ +} + +#endif diff --git a/include/asm-xtensa/ide.h b/include/asm-xtensa/ide.h new file mode 100644 index 000000000000..b523cd4a486e --- /dev/null +++ b/include/asm-xtensa/ide.h @@ -0,0 +1,36 @@ +/* + * include/asm-xtensa/ide.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1996 Linus Torvalds & authors + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_IDE_H +#define _XTENSA_IDE_H + +#ifdef __KERNEL__ + +#include + +#ifndef MAX_HWIFS +# define MAX_HWIFS 1 +#endif + +static __inline__ int ide_default_irq(unsigned long base) +{ + /* Unsupported! */ + return 0; +} + +static __inline__ unsigned long ide_default_io_base(int index) +{ + /* Unsupported! */ + return 0; +} + +#endif /* __KERNEL__ */ +#endif /* _XTENSA_IDE_H */ diff --git a/include/asm-xtensa/io.h b/include/asm-xtensa/io.h new file mode 100644 index 000000000000..2c471c42ecfc --- /dev/null +++ b/include/asm-xtensa/io.h @@ -0,0 +1,197 @@ +/* + * linux/include/asm-xtensa/io.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_IO_H +#define _XTENSA_IO_H + +#ifdef __KERNEL__ +#include +#include + +#include +#include + +#define _IO_BASE 0 + + +/* + * swap functions to change byte order from little-endian to big-endian and + * vice versa. + */ + +static inline unsigned short _swapw (unsigned short v) +{ + return (v << 8) | (v >> 8); +} + +static inline unsigned int _swapl (unsigned int v) +{ + return (v << 24) | ((v & 0xff00) << 8) | ((v >> 8) & 0xff00) | (v >> 24); +} + +/* + * Change virtual addresses to physical addresses and vv. + * These are trivial on the 1:1 Linux/Xtensa mapping + */ + +extern inline unsigned long virt_to_phys(volatile void * address) +{ + return PHYSADDR((unsigned long)address); +} + +extern inline void * phys_to_virt(unsigned long address) +{ + return (void*) CACHED_ADDR(address); +} + +/* + * IO bus memory addresses are also 1:1 with the physical address + */ + +extern inline unsigned long virt_to_bus(volatile void * address) +{ + return PHYSADDR((unsigned long)address); +} + +extern inline void * bus_to_virt (unsigned long address) +{ + return (void *) CACHED_ADDR(address); +} + +/* + * Change "struct page" to physical address. + */ + +extern inline void *ioremap(unsigned long offset, unsigned long size) +{ + return (void *) CACHED_ADDR_IO(offset); +} + +extern inline void *ioremap_nocache(unsigned long offset, unsigned long size) +{ + return (void *) BYPASS_ADDR_IO(offset); +} + +extern inline void iounmap(void *addr) +{ +} + +/* + * Generic I/O + */ + +#define readb(addr) \ + ({ unsigned char __v = (*(volatile unsigned char *)(addr)); __v; }) +#define readw(addr) \ + ({ unsigned short __v = (*(volatile unsigned short *)(addr)); __v; }) +#define readl(addr) \ + ({ unsigned int __v = (*(volatile unsigned int *)(addr)); __v; }) +#define writeb(b, addr) (void)((*(volatile unsigned char *)(addr)) = (b)) +#define writew(b, addr) (void)((*(volatile unsigned short *)(addr)) = (b)) +#define writel(b, addr) (void)((*(volatile unsigned int *)(addr)) = (b)) + +static inline __u8 __raw_readb(const volatile void __iomem *addr) +{ + return *(__force volatile __u8 *)(addr); +} +static inline __u16 __raw_readw(const volatile void __iomem *addr) +{ + return *(__force volatile __u16 *)(addr); +} +static inline __u32 __raw_readl(const volatile void __iomem *addr) +{ + return *(__force volatile __u32 *)(addr); +} +static inline void __raw_writeb(__u8 b, volatile void __iomem *addr) +{ + *(__force volatile __u8 *)(addr) = b; +} +static inline void __raw_writew(__u16 b, volatile void __iomem *addr) +{ + *(__force volatile __u16 *)(addr) = b; +} +static inline void __raw_writel(__u32 b, volatile void __iomem *addr) +{ + *(__force volatile __u32 *)(addr) = b; +} + + + + +/* These are the definitions for the x86 IO instructions + * inb/inw/inl/outb/outw/outl, the "string" versions + * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions + * inb_p/inw_p/... + * The macros don't do byte-swapping. + */ + +#define inb(port) readb((u8 *)((port)+_IO_BASE)) +#define outb(val, port) writeb((val),(u8 *)((unsigned long)(port)+_IO_BASE)) +#define inw(port) readw((u16 *)((port)+_IO_BASE)) +#define outw(val, port) writew((val),(u16 *)((unsigned long)(port)+_IO_BASE)) +#define inl(port) readl((u32 *)((port)+_IO_BASE)) +#define outl(val, port) writel((val),(u32 *)((unsigned long)(port))) + +#define inb_p(port) inb((port)) +#define outb_p(val, port) outb((val), (port)) +#define inw_p(port) inw((port)) +#define outw_p(val, port) outw((val), (port)) +#define inl_p(port) inl((port)) +#define outl_p(val, port) outl((val), (port)) + +extern void insb (unsigned long port, void *dst, unsigned long count); +extern void insw (unsigned long port, void *dst, unsigned long count); +extern void insl (unsigned long port, void *dst, unsigned long count); +extern void outsb (unsigned long port, const void *src, unsigned long count); +extern void outsw (unsigned long port, const void *src, unsigned long count); +extern void outsl (unsigned long port, const void *src, unsigned long count); + +#define IO_SPACE_LIMIT ~0 + +#define memset_io(a,b,c) memset((void *)(a),(b),(c)) +#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) +#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) + +/* At this point the Xtensa doesn't provide byte swap instructions */ + +#ifdef __XTENSA_EB__ +# define in_8(addr) (*(u8*)(addr)) +# define in_le16(addr) _swapw(*(u16*)(addr)) +# define in_le32(addr) _swapl(*(u32*)(addr)) +# define out_8(b, addr) *(u8*)(addr) = (b) +# define out_le16(b, addr) *(u16*)(addr) = _swapw(b) +# define out_le32(b, addr) *(u32*)(addr) = _swapl(b) +#elif defined(__XTENSA_EL__) +# define in_8(addr) (*(u8*)(addr)) +# define in_le16(addr) (*(u16*)(addr)) +# define in_le32(addr) (*(u32*)(addr)) +# define out_8(b, addr) *(u8*)(addr) = (b) +# define out_le16(b, addr) *(u16*)(addr) = (b) +# define out_le32(b, addr) *(u32*)(addr) = (b) +#else +# error processor byte order undefined! +#endif + + +/* + * * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * * access + * */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * * Convert a virtual cached pointer to an uncached pointer + * */ +#define xlate_dev_kmem_ptr(p) p + + +#endif /* __KERNEL__ */ + +#endif /* _XTENSA_IO_H */ diff --git a/include/asm-xtensa/ioctl.h b/include/asm-xtensa/ioctl.h new file mode 100644 index 000000000000..856c605d62b1 --- /dev/null +++ b/include/asm-xtensa/ioctl.h @@ -0,0 +1,83 @@ +/* + * include/asm-xtensa/ioctl.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 - 2005 Tensilica Inc. + * + * Derived from "include/asm-i386/ioctl.h" + */ + +#ifndef _XTENSA_IOCTL_H +#define _XTENSA_IOCTL_H + + +/* ioctl command encoding: 32 bits total, command in lower 16 bits, + * size of the parameter structure in the lower 14 bits of the + * upper 16 bits. + * Encoding the size of the parameter structure in the ioctl request + * is useful for catching programs compiled with old versions + * and to avoid overwriting user space outside the user buffer area. + * The highest 2 bits are reserved for indicating the ``access mode''. + * NOTE: This limits the max parameter size to 16kB -1 ! + */ + +/* + * The following is for compatibility across the various Linux + * platforms. The i386 ioctl numbering scheme doesn't really enforce + * a type field. De facto, however, the top 8 bits of the lower 16 + * bits are indeed used as a type field, so we might just as well make + * this explicit here. Please be sure to use the decoding macros + * below from now on. + */ +#define _IOC_NRBITS 8 +#define _IOC_TYPEBITS 8 +#define _IOC_SIZEBITS 14 +#define _IOC_DIRBITS 2 + +#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1) +#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1) +#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1) +#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1) + +#define _IOC_NRSHIFT 0 +#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS) +#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS) +#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS) + +/* + * Direction bits. + */ +#define _IOC_NONE 0U +#define _IOC_WRITE 1U +#define _IOC_READ 2U + +#define _IOC(dir,type,nr,size) \ + (((dir) << _IOC_DIRSHIFT) | \ + ((type) << _IOC_TYPESHIFT) | \ + ((nr) << _IOC_NRSHIFT) | \ + ((size) << _IOC_SIZESHIFT)) + +/* used to create numbers */ +#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0) +#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size)) +#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size)) +#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size)) + +/* used to decode ioctl numbers.. */ +#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) +#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK) +#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK) +#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK) + +/* ...and for the drivers/sound files... */ + +#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT) +#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT) +#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT) +#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT) +#define IOCSIZE_SHIFT (_IOC_SIZESHIFT) + +#endif diff --git a/include/asm-xtensa/ioctls.h b/include/asm-xtensa/ioctls.h new file mode 100644 index 000000000000..10c443435c11 --- /dev/null +++ b/include/asm-xtensa/ioctls.h @@ -0,0 +1,112 @@ +/* + * include/asm-xtensa/ioctl.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 - 2005 Tensilica Inc. + * + * Derived from "include/asm-i386/ioctls.h" + */ + +#ifndef _XTENSA_IOCTLS_H +#define _XTENSA_IOCTLS_H + +#include + +#define FIOCLEX _IO('f', 1) +#define FIONCLEX _IO('f', 2) +#define FIOASYNC _IOW('f', 125, int) +#define FIONBIO _IOW('f', 126, int) +#define FIONREAD _IOR('f', 127, int) +#define TIOCINQ FIONREAD +#define FIOQSIZE _IOR('f', 128, loff_t) + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 + +#define TCGETA _IOR('t', 23, struct termio) +#define TCSETA _IOW('t', 24, struct termio) +#define TCSETAW _IOW('t', 25, struct termio) +#define TCSETAF _IOW('t', 28, struct termio) + +#define TCSBRK _IO('t', 29) +#define TCXONC _IO('t', 30) +#define TCFLSH _IO('t', 31) + +#define TIOCSWINSZ _IOW('t', 103, struct winsize) +#define TIOCGWINSZ _IOR('t', 104, struct winsize) +#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ +#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ +#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ + +#define TIOCSPGRP _IOW('t', 118, int) +#define TIOCGPGRP _IOR('t', 119, int) + +#define TIOCEXCL _IO('T', 12) +#define TIOCNXCL _IO('T', 13) +#define TIOCSCTTY _IO('T', 14) + +#define TIOCSTI _IOW('T', 18, char) +#define TIOCMGET _IOR('T', 21, unsigned int) +#define TIOCMBIS _IOW('T', 22, unsigned int) +#define TIOCMBIC _IOW('T', 23, unsigned int) +#define TIOCMSET _IOW('T', 24, unsigned int) +# define TIOCM_LE 0x001 +# define TIOCM_DTR 0x002 +# define TIOCM_RTS 0x004 +# define TIOCM_ST 0x008 +# define TIOCM_SR 0x010 +# define TIOCM_CTS 0x020 +# define TIOCM_CAR 0x040 +# define TIOCM_RNG 0x080 +# define TIOCM_DSR 0x100 +# define TIOCM_CD TIOCM_CAR +# define TIOCM_RI TIOCM_RNG + +#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) +#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) +#define TIOCLINUX _IOW('T', 28, char) +#define TIOCCONS _IO('T', 29) +#define TIOCGSERIAL _IOR('T', 30, struct serial_struct) +#define TIOCSSERIAL _IOW('T', 31, struct serial_struct) +#define TIOCPKT _IOW('T', 32, int) +# define TIOCPKT_DATA 0 +# define TIOCPKT_FLUSHREAD 1 +# define TIOCPKT_FLUSHWRITE 2 +# define TIOCPKT_STOP 4 +# define TIOCPKT_START 8 +# define TIOCPKT_NOSTOP 16 +# define TIOCPKT_DOSTOP 32 + + +#define TIOCNOTTY _IO('T', 34) +#define TIOCSETD _IOW('T', 35, int) +#define TIOCGETD _IOR('T', 36, int) +#define TCSBRKP _IOW('T', 37, int) /* Needed for POSIX tcsendbreak()*/ +#define TIOCTTYGSTRUCT _IOR('T', 38, struct tty_struct) /* For debugging only*/ +#define TIOCSBRK _IO('T', 39) /* BSD compatibility */ +#define TIOCCBRK _IO('T', 40) /* BSD compatibility */ +#define TIOCGSID _IOR('T', 41, pid_t) /* Return the session ID of FD*/ +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define TIOCSERCONFIG _IO('T', 83) +#define TIOCSERGWILD _IOR('T', 84, int) +#define TIOCSERSWILD _IOW('T', 85, int) +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* Get line status reg. */ + /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ +# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ +#define TIOCSERGETMULTI _IOR('T', 90, struct serial_multiport_struct) /* Get multiport config */ +#define TIOCSERSETMULTI _IOW('T', 91, struct serial_multiport_struct) /* Set multiport config */ + +#define TIOCMIWAIT _IO('T', 92) /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT _IOR('T', 93, struct async_icount) /* read serial port inline interrupt counts */ + +#endif /* _XTENSA_IOCTLS_H */ diff --git a/include/asm-xtensa/ipc.h b/include/asm-xtensa/ipc.h new file mode 100644 index 000000000000..d37bdb4d4c9c --- /dev/null +++ b/include/asm-xtensa/ipc.h @@ -0,0 +1,34 @@ +/* + * include/asm-xtensa/ipc.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_IPC_H +#define _XTENSA_IPC_H + +struct ipc_kludge { + struct msgbuf __user *msgp; + long msgtyp; +}; + +#define SEMOP 1 +#define SEMGET 2 +#define SEMCTL 3 +#define SEMTIMEDOP 4 +#define MSGSND 11 +#define MSGRCV 12 +#define MSGGET 13 +#define MSGCTL 14 +#define SHMAT 21 +#define SHMDT 22 +#define SHMGET 23 +#define SHMCTL 24 + +#define IPCCALL(version,op) ((version)<<16 | (op)) + +#endif /* _XTENSA_IPC_H */ diff --git a/include/asm-xtensa/ipcbuf.h b/include/asm-xtensa/ipcbuf.h new file mode 100644 index 000000000000..c33aa6a42145 --- /dev/null +++ b/include/asm-xtensa/ipcbuf.h @@ -0,0 +1,37 @@ +/* + * include/asm-xtensa/ipcbuf.h + * + * The ipc64_perm structure for the Xtensa architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_IPCBUF_H +#define _XTENSA_IPCBUF_H + +/* + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned long seq; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _XTENSA_IPCBUF_H */ diff --git a/include/asm-xtensa/irq.h b/include/asm-xtensa/irq.h new file mode 100644 index 000000000000..d984e955938f --- /dev/null +++ b/include/asm-xtensa/irq.h @@ -0,0 +1,37 @@ +/* + * include/asm-xtensa/irq.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_IRQ_H +#define _XTENSA_IRQ_H + +#include +#include + +#include + +#ifndef PLATFORM_NR_IRQS +# define PLATFORM_NR_IRQS 0 +#endif +#define XTENSA_NR_IRQS XCHAL_NUM_INTERRUPTS +#define NR_IRQS (XTENSA_NR_IRQS + PLATFORM_NR_IRQS) + +static __inline__ int irq_canonicalize(int irq) +{ + return (irq); +} + +struct irqaction; +#if 0 // FIXME +extern void disable_irq_nosync(unsigned int); +extern void disable_irq(unsigned int); +extern void enable_irq(unsigned int); +#endif + +#endif /* _XTENSA_IRQ_H */ diff --git a/include/asm-xtensa/kmap_types.h b/include/asm-xtensa/kmap_types.h new file mode 100644 index 000000000000..9e822d2e3bce --- /dev/null +++ b/include/asm-xtensa/kmap_types.h @@ -0,0 +1,31 @@ +/* + * include/asm-xtensa/kmap_types.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_KMAP_TYPES_H +#define _XTENSA_KMAP_TYPES_H + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif /* _XTENSA_KMAP_TYPES_H */ diff --git a/include/asm-xtensa/linkage.h b/include/asm-xtensa/linkage.h new file mode 100644 index 000000000000..bf2128a99d79 --- /dev/null +++ b/include/asm-xtensa/linkage.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/linkage.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_LINKAGE_H +#define _XTENSA_LINKAGE_H + +/* Nothing to do here ... */ + +#endif /* _XTENSA_LINKAGE_H */ diff --git a/include/asm-xtensa/local.h b/include/asm-xtensa/local.h new file mode 100644 index 000000000000..48723e550d14 --- /dev/null +++ b/include/asm-xtensa/local.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/local.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_LOCAL_H +#define _XTENSA_LOCAL_H + +#include + +#endif /* _XTENSA_LOCAL_H */ diff --git a/include/asm-xtensa/mman.h b/include/asm-xtensa/mman.h new file mode 100644 index 000000000000..9a95a45df996 --- /dev/null +++ b/include/asm-xtensa/mman.h @@ -0,0 +1,80 @@ +/* + * include/asm-xtensa/mman.h + * + * Xtensa Processor memory-manager definitions + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 by Ralf Baechle + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_MMAN_H +#define _XTENSA_MMAN_H + +/* + * Protections are chosen from these bits, OR'd together. The + * implementation does not necessarily support PROT_EXEC or PROT_WRITE + * without PROT_READ. The only guarantees are that no writing will be + * allowed without PROT_WRITE and no access will be allowed for PROT_NONE. + */ + +#define PROT_NONE 0x0 /* page can not be accessed */ +#define PROT_READ 0x1 /* page can be read */ +#define PROT_WRITE 0x2 /* page can be written */ +#define PROT_EXEC 0x4 /* page can be executed */ + +#define PROT_SEM 0x10 /* page may be used for atomic ops */ +#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ +#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end fo growsup vma */ + +/* + * Flags for mmap + */ +#define MAP_SHARED 0x001 /* Share changes */ +#define MAP_PRIVATE 0x002 /* Changes are private */ +#define MAP_TYPE 0x00f /* Mask for type of mapping */ +#define MAP_FIXED 0x010 /* Interpret addr exactly */ + +/* not used by linux, but here to make sure we don't clash with ABI defines */ +#define MAP_RENAME 0x020 /* Assign page to file */ +#define MAP_AUTOGROW 0x040 /* File may grow by writing */ +#define MAP_LOCAL 0x080 /* Copy on fork/sproc */ +#define MAP_AUTORSRV 0x100 /* Logical swap reserved on demand */ + +/* These are linux-specific */ +#define MAP_NORESERVE 0x0400 /* don't check for reservations */ +#define MAP_ANONYMOUS 0x0800 /* don't use a file */ +#define MAP_GROWSDOWN 0x1000 /* stack-like segment */ +#define MAP_DENYWRITE 0x2000 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x4000 /* mark it as an executable */ +#define MAP_LOCKED 0x8000 /* pages are locked */ +#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x20000 /* do not block on IO */ + +/* + * Flags for msync + */ +#define MS_ASYNC 0x0001 /* sync memory asynchronously */ +#define MS_INVALIDATE 0x0002 /* invalidate mappings & caches */ +#define MS_SYNC 0x0004 /* synchronous memory sync */ + +/* + * Flags for mlockall + */ +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#define MADV_NORMAL 0x0 /* default page-in behavior */ +#define MADV_RANDOM 0x1 /* page-in minimum required */ +#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */ +#define MADV_WILLNEED 0x3 /* pre-fault pages */ +#define MADV_DONTNEED 0x4 /* discard these pages */ + +/* compatibility flags */ +#define MAP_ANON MAP_ANONYMOUS +#define MAP_FILE 0 + +#endif /* _XTENSA_MMAN_H */ diff --git a/include/asm-xtensa/mmu.h b/include/asm-xtensa/mmu.h new file mode 100644 index 000000000000..44c5bb04c55c --- /dev/null +++ b/include/asm-xtensa/mmu.h @@ -0,0 +1,17 @@ +/* + * include/asm-xtensa/mmu.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_MMU_H +#define _XTENSA_MMU_H + +/* Default "unsigned long" context */ +typedef unsigned long mm_context_t; + +#endif /* _XTENSA_MMU_H */ diff --git a/include/asm-xtensa/mmu_context.h b/include/asm-xtensa/mmu_context.h new file mode 100644 index 000000000000..1b0801548cd9 --- /dev/null +++ b/include/asm-xtensa/mmu_context.h @@ -0,0 +1,330 @@ +/* + * include/asm-xtensa/mmu_context.h + * + * Switch an MMU context. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_MMU_CONTEXT_H +#define _XTENSA_MMU_CONTEXT_H + +#include +#include + +#include +#include +#include +#include + +/* + * Linux was ported to Xtensa assuming all auto-refill ways in set 0 + * had the same properties (a very likely assumption). Multiple sets + * of auto-refill ways will still work properly, but not as optimally + * as the Xtensa designer may have assumed. + * + * We make this case a hard #error, killing the kernel build, to alert + * the developer to this condition (which is more likely an error). + * You super-duper clever developers can change it to a warning or + * remove it altogether if you think you know what you're doing. :) + */ + +#if (XCHAL_HAVE_TLBS != 1) +# error "Linux must have an MMU!" +#endif + +#if ((XCHAL_ITLB_ARF_WAYS == 0) || (XCHAL_DTLB_ARF_WAYS == 0)) +# error "MMU must have auto-refill ways" +#endif + +#if ((XCHAL_ITLB_ARF_SETS != 1) || (XCHAL_DTLB_ARF_SETS != 1)) +# error Linux may not use all auto-refill ways as efficiently as you think +#endif + +#if (XCHAL_MMU_MAX_PTE_PAGE_SIZE != XCHAL_MMU_MIN_PTE_PAGE_SIZE) +# error Only one page size allowed! +#endif + +extern unsigned long asid_cache; +extern pgd_t *current_pgd; + +/* + * Define the number of entries per auto-refill way in set 0 of both I and D + * TLBs. We deal only with set 0 here (an assumption further explained in + * assertions.h). Also, define the total number of ARF entries in both TLBs. + */ + +#define ITLB_ENTRIES_PER_ARF_WAY (XCHAL_ITLB_SET(XCHAL_ITLB_ARF_SET0,ENTRIES)) +#define DTLB_ENTRIES_PER_ARF_WAY (XCHAL_DTLB_SET(XCHAL_DTLB_ARF_SET0,ENTRIES)) + +#define ITLB_ENTRIES \ + (ITLB_ENTRIES_PER_ARF_WAY * (XCHAL_ITLB_SET(XCHAL_ITLB_ARF_SET0,WAYS))) +#define DTLB_ENTRIES \ + (DTLB_ENTRIES_PER_ARF_WAY * (XCHAL_DTLB_SET(XCHAL_DTLB_ARF_SET0,WAYS))) + + +/* + * SMALLEST_NTLB_ENTRIES is the smaller of ITLB_ENTRIES and DTLB_ENTRIES. + * In practice, they are probably equal. This macro simplifies function + * flush_tlb_range(). + */ + +#if (DTLB_ENTRIES < ITLB_ENTRIES) +# define SMALLEST_NTLB_ENTRIES DTLB_ENTRIES +#else +# define SMALLEST_NTLB_ENTRIES ITLB_ENTRIES +#endif + + +/* + * asid_cache tracks only the ASID[USER_RING] field of the RASID special + * register, which is the current user-task asid allocation value. + * mm->context has the same meaning. When it comes time to write the + * asid_cache or mm->context values to the RASID special register, we first + * shift the value left by 8, then insert the value. + * ASID[0] always contains the kernel's asid value, and we reserve three + * other asid values that we never assign to user tasks. + */ + +#define ASID_INC 0x1 +#define ASID_MASK ((1 << XCHAL_MMU_ASID_BITS) - 1) + +/* + * XCHAL_MMU_ASID_INVALID is a configurable Xtensa processor constant + * indicating invalid address space. XCHAL_MMU_ASID_KERNEL is a configurable + * Xtensa processor constant indicating the kernel address space. They can + * be arbitrary values. + * + * We identify three more unique, reserved ASID values to use in the unused + * ring positions. No other user process will be assigned these reserved + * ASID values. + * + * For example, given that + * + * XCHAL_MMU_ASID_INVALID == 0 + * XCHAL_MMU_ASID_KERNEL == 1 + * + * the following maze of #if statements would generate + * + * ASID_RESERVED_1 == 2 + * ASID_RESERVED_2 == 3 + * ASID_RESERVED_3 == 4 + * ASID_FIRST_NONRESERVED == 5 + */ + +#if (XCHAL_MMU_ASID_INVALID != XCHAL_MMU_ASID_KERNEL + 1) +# define ASID_RESERVED_1 ((XCHAL_MMU_ASID_KERNEL + 1) & ASID_MASK) +#else +# define ASID_RESERVED_1 ((XCHAL_MMU_ASID_KERNEL + 2) & ASID_MASK) +#endif + +#if (XCHAL_MMU_ASID_INVALID != ASID_RESERVED_1 + 1) +# define ASID_RESERVED_2 ((ASID_RESERVED_1 + 1) & ASID_MASK) +#else +# define ASID_RESERVED_2 ((ASID_RESERVED_1 + 2) & ASID_MASK) +#endif + +#if (XCHAL_MMU_ASID_INVALID != ASID_RESERVED_2 + 1) +# define ASID_RESERVED_3 ((ASID_RESERVED_2 + 1) & ASID_MASK) +#else +# define ASID_RESERVED_3 ((ASID_RESERVED_2 + 2) & ASID_MASK) +#endif + +#if (XCHAL_MMU_ASID_INVALID != ASID_RESERVED_3 + 1) +# define ASID_FIRST_NONRESERVED ((ASID_RESERVED_3 + 1) & ASID_MASK) +#else +# define ASID_FIRST_NONRESERVED ((ASID_RESERVED_3 + 2) & ASID_MASK) +#endif + +#define ASID_ALL_RESERVED ( ((ASID_RESERVED_1) << 24) + \ + ((ASID_RESERVED_2) << 16) + \ + ((ASID_RESERVED_3) << 8) + \ + ((XCHAL_MMU_ASID_KERNEL)) ) + + +/* + * NO_CONTEXT is the invalid ASID value that we don't ever assign to + * any user or kernel context. NO_CONTEXT is a better mnemonic than + * XCHAL_MMU_ASID_INVALID, so we use it in code instead. + */ + +#define NO_CONTEXT XCHAL_MMU_ASID_INVALID + +#if (KERNEL_RING != 0) +# error The KERNEL_RING really should be zero. +#endif + +#if (USER_RING >= XCHAL_MMU_RINGS) +# error USER_RING cannot be greater than the highest numbered ring. +#endif + +#if (USER_RING == KERNEL_RING) +# error The user and kernel rings really should not be equal. +#endif + +#if (USER_RING == 1) +#define ASID_INSERT(x) ( ((ASID_RESERVED_1) << 24) + \ + ((ASID_RESERVED_2) << 16) + \ + (((x) & (ASID_MASK)) << 8) + \ + ((XCHAL_MMU_ASID_KERNEL)) ) + +#elif (USER_RING == 2) +#define ASID_INSERT(x) ( ((ASID_RESERVED_1) << 24) + \ + (((x) & (ASID_MASK)) << 16) + \ + ((ASID_RESERVED_2) << 8) + \ + ((XCHAL_MMU_ASID_KERNEL)) ) + +#elif (USER_RING == 3) +#define ASID_INSERT(x) ( (((x) & (ASID_MASK)) << 24) + \ + ((ASID_RESERVED_1) << 16) + \ + ((ASID_RESERVED_2) << 8) + \ + ((XCHAL_MMU_ASID_KERNEL)) ) + +#else +#error Goofy value for USER_RING + +#endif /* USER_RING == 1 */ + + +/* + * All unused by hardware upper bits will be considered + * as a software asid extension. + */ + +#define ASID_VERSION_MASK ((unsigned long)~(ASID_MASK|(ASID_MASK-1))) +#define ASID_FIRST_VERSION \ + ((unsigned long)(~ASID_VERSION_MASK) + 1 + ASID_FIRST_NONRESERVED) + +extern inline void set_rasid_register (unsigned long val) +{ + __asm__ __volatile__ (" wsr %0, "__stringify(RASID)"\n\t" + " isync\n" : : "a" (val)); +} + +extern inline unsigned long get_rasid_register (void) +{ + unsigned long tmp; + __asm__ __volatile__ (" rsr %0, "__stringify(RASID)"\n\t" : "=a" (tmp)); + return tmp; +} + + +#if ((XCHAL_MMU_ASID_INVALID == 0) && (XCHAL_MMU_ASID_KERNEL == 1)) + +extern inline void +get_new_mmu_context(struct mm_struct *mm, unsigned long asid) +{ + extern void flush_tlb_all(void); + if (! ((asid += ASID_INC) & ASID_MASK) ) { + flush_tlb_all(); /* start new asid cycle */ + if (!asid) /* fix version if needed */ + asid = ASID_FIRST_VERSION - ASID_FIRST_NONRESERVED; + asid += ASID_FIRST_NONRESERVED; + } + mm->context = asid_cache = asid; +} + +#else +#warning ASID_{INVALID,KERNEL} values impose non-optimal get_new_mmu_context implementation + +/* XCHAL_MMU_ASID_INVALID == 0 and XCHAL_MMU_ASID_KERNEL ==1 are + really the best, but if you insist... */ + +extern inline int validate_asid (unsigned long asid) +{ + switch (asid) { + case XCHAL_MMU_ASID_INVALID: + case XCHAL_MMU_ASID_KERNEL: + case ASID_RESERVED_1: + case ASID_RESERVED_2: + case ASID_RESERVED_3: + return 0; /* can't use these values as ASIDs */ + } + return 1; /* valid */ +} + +extern inline void +get_new_mmu_context(struct mm_struct *mm, unsigned long asid) +{ + extern void flush_tlb_all(void); + while (1) { + asid += ASID_INC; + if ( ! (asid & ASID_MASK) ) { + flush_tlb_all(); /* start new asid cycle */ + if (!asid) /* fix version if needed */ + asid = ASID_FIRST_VERSION - ASID_FIRST_NONRESERVED; + asid += ASID_FIRST_NONRESERVED; + break; /* no need to validate here */ + } + if (validate_asid (asid & ASID_MASK)) + break; + } + mm->context = asid_cache = asid; +} + +#endif + + +/* + * Initialize the context related info for a new mm_struct + * instance. + */ + +extern inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + mm->context = NO_CONTEXT; + return 0; +} + +extern inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + unsigned long asid = asid_cache; + + /* Check if our ASID is of an older version and thus invalid */ + + if ((next->context ^ asid) & ASID_VERSION_MASK) + get_new_mmu_context(next, asid); + + set_rasid_register (ASID_INSERT(next->context)); + invalidate_page_directory(); +} + +#define deactivate_mm(tsk, mm) do { } while(0) + +/* + * Destroy context related info for an mm_struct that is about + * to be put to rest. + */ +extern inline void destroy_context(struct mm_struct *mm) +{ + /* Nothing to do. */ +} + +/* + * After we have set current->mm to a new value, this activates + * the context for the new mm so we see the new mappings. + */ +extern inline void +activate_mm(struct mm_struct *prev, struct mm_struct *next) +{ + /* Unconditionally get a new ASID. */ + + get_new_mmu_context(next, asid_cache); + set_rasid_register (ASID_INSERT(next->context)); + invalidate_page_directory(); +} + + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ + /* Nothing to do. */ + +} + +#endif /* _XTENSA_MMU_CONTEXT_H */ diff --git a/include/asm-xtensa/module.h b/include/asm-xtensa/module.h new file mode 100644 index 000000000000..ffb25bfdf6a1 --- /dev/null +++ b/include/asm-xtensa/module.h @@ -0,0 +1,25 @@ +/* + * include/asm-xtensa/module.h + * + * This file contains the module code specific to the Xtensa architecture. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_MODULE_H +#define _XTENSA_MODULE_H + +struct mod_arch_specific +{ + /* Module support is not completely implemented. */ +}; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +#endif /* _XTENSA_MODULE_H */ diff --git a/include/asm-xtensa/msgbuf.h b/include/asm-xtensa/msgbuf.h new file mode 100644 index 000000000000..693c96755280 --- /dev/null +++ b/include/asm-xtensa/msgbuf.h @@ -0,0 +1,48 @@ +/* + * include/asm-xtensa/msgbuf.h + * + * The msqid64_ds structure for the Xtensa architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef _XTENSA_MSGBUF_H +#define _XTENSA_MSGBUF_H + +struct msqid64_ds { + struct ipc64_perm msg_perm; +#ifdef __XTENSA_EB__ + unsigned int __unused1; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned int __unused2; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned int __unused3; + __kernel_time_t msg_ctime; /* last change time */ +#elif defined(__XTENSA_EL__) + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned int __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned int __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned int __unused3; +#else +# error processor byte order undefined! +#endif + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _XTENSA_MSGBUF_H */ diff --git a/include/asm-xtensa/namei.h b/include/asm-xtensa/namei.h new file mode 100644 index 000000000000..3fdff039d27d --- /dev/null +++ b/include/asm-xtensa/namei.h @@ -0,0 +1,26 @@ +/* + * include/asm-xtensa/namei.h + * + * Included from linux/fs/namei.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_NAMEI_H +#define _XTENSA_NAMEI_H + +#ifdef __KERNEL__ + +/* This dummy routine maybe changed to something useful + * for /usr/gnemul/ emulation stuff. + * Look at asm-sparc/namei.h for details. + */ + +#define __emul_prefix() NULL + +#endif /* __KERNEL__ */ +#endif /* _XTENSA_NAMEI_H */ diff --git a/include/asm-xtensa/page.h b/include/asm-xtensa/page.h new file mode 100644 index 000000000000..b495e5b5a942 --- /dev/null +++ b/include/asm-xtensa/page.h @@ -0,0 +1,133 @@ +/* + * linux/include/asm-xtensa/page.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version2 as + * published by the Free Software Foundation. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_PAGE_H +#define _XTENSA_PAGE_H + +#ifdef __KERNEL__ + +#include +#include + +/* + * PAGE_SHIFT determines the page size + * PAGE_ALIGN(x) aligns the pointer to the (next) page boundary + */ + +#define PAGE_SHIFT XCHAL_MMU_MIN_PTE_PAGE_SIZE +#define PAGE_SIZE (1 << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) +#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE - 1) & PAGE_MASK) + +#define DCACHE_WAY_SIZE (XCHAL_DCACHE_SIZE / XCHAL_DCACHE_WAYS) +#define PAGE_OFFSET XCHAL_KSEG_CACHED_VADDR + +#ifdef __ASSEMBLY__ + +#define __pgprot(x) (x) + +#else + +/* + * These are used to make use of C type-checking.. + */ + +typedef struct { unsigned long pte; } pte_t; /* page table entry */ +typedef struct { unsigned long pgd; } pgd_t; /* PGD table entry */ +typedef struct { unsigned long pgprot; } pgprot_t; + +#define pte_val(x) ((x).pte) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +/* + * Pure 2^n version of get_order + */ + +extern __inline__ int get_order(unsigned long size) +{ + int order; +#ifndef XCHAL_HAVE_NSU + unsigned long x1, x2, x4, x8, x16; + + size = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; + x1 = size & 0xAAAAAAAA; + x2 = size & 0xCCCCCCCC; + x4 = size & 0xF0F0F0F0; + x8 = size & 0xFF00FF00; + x16 = size & 0xFFFF0000; + order = x2 ? 2 : 0; + order += (x16 != 0) * 16; + order += (x8 != 0) * 8; + order += (x4 != 0) * 4; + order += (x1 != 0); + + return order; +#else + size = (size - 1) >> PAGE_SHIFT; + asm ("nsau %0, %1" : "=r" (order) : "r" (size)); + return 32 - order; +#endif +} + + +struct page; +extern void clear_page(void *page); +extern void copy_page(void *to, void *from); + +/* + * If we have cache aliasing and writeback caches, we might have to do + * some extra work + */ + +#if (DCACHE_WAY_SIZE > PAGE_SIZE) +void clear_user_page(void *addr, unsigned long vaddr, struct page* page); +void copy_user_page(void *to,void* from,unsigned long vaddr,struct page* page); +#else +# define clear_user_page(page,vaddr,pg) clear_page(page) +# define copy_user_page(to, from, vaddr, pg) copy_page(to, from) +#endif + +/* + * This handles the memory map. We handle pages at + * XCHAL_KSEG_CACHED_VADDR for kernels with 32 bit address space. + * These macros are for conversion of kernel address, not user + * addresses. + */ + +#define __pa(x) ((unsigned long) (x) - PAGE_OFFSET) +#define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET)) +#define pfn_valid(pfn) ((unsigned long)pfn < max_mapnr) +#ifndef CONFIG_DISCONTIGMEM +# define pfn_to_page(pfn) (mem_map + (pfn)) +# define page_to_pfn(page) ((unsigned long)((page) - mem_map)) +#else +# error CONFIG_DISCONTIGMEM not supported +#endif + +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define page_to_virt(page) __va(page_to_pfn(page) << PAGE_SHIFT) +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + +#define WANT_PAGE_VIRTUAL + + +#endif /* __ASSEMBLY__ */ + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#endif /* __KERNEL__ */ +#endif /* _XTENSA_PAGE_H */ diff --git a/include/asm-xtensa/page.h.n b/include/asm-xtensa/page.h.n new file mode 100644 index 000000000000..546cc6624f24 --- /dev/null +++ b/include/asm-xtensa/page.h.n @@ -0,0 +1,135 @@ +/* + * linux/include/asm-xtensa/page.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version2 as + * published by the Free Software Foundation. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_PAGE_H +#define _XTENSA_PAGE_H + +#ifdef __KERNEL__ + +#include +#include + +/* + * PAGE_SHIFT determines the page size + * PAGE_ALIGN(x) aligns the pointer to the (next) page boundary + */ +#define PAGE_SHIFT XCHAL_MMU_MIN_PTE_PAGE_SIZE +#define PAGE_SIZE (1 << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) +#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE - 1) & PAGE_MASK) + +#define DCACHE_WAY_SIZE (XCHAL_DCACHE_SIZE / XCHAL_DCACHE_WAYS) +#define PAGE_OFFSET XCHAL_KSEG_CACHED_VADDR + +#ifdef __ASSEMBLY__ + +#define __pgprot(x) (x) + +#else + + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; /* page table entry */ +typedef struct { unsigned long pmd; } pmd_t; /* PMD table entry */ +typedef struct { unsigned long pgd; } pgd_t; /* PGD table entry */ +typedef struct { unsigned long pgprot; } pgprot_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((x).pmd) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +/* + * Pure 2^n version of get_order + */ +extern __inline__ int get_order(unsigned long size) +{ + int order; +#ifndef XCHAL_HAVE_NSU + unsigned long x1, x2, x4, x8, x16; + + size = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; + x1 = size & 0xAAAAAAAA; + x2 = size & 0xCCCCCCCC; + x4 = size & 0xF0F0F0F0; + x8 = size & 0xFF00FF00; + x16 = size & 0xFFFF0000; + order = x2 ? 2 : 0; + order += (x16 != 0) * 16; + order += (x8 != 0) * 8; + order += (x4 != 0) * 4; + order += (x1 != 0); + + return order; +#else + size = (size - 1) >> PAGE_SHIFT; + asm ("nsau %0, %1" : "=r" (order) : "r" (size)); + return 32 - order; +#endif +} + + +struct page; +extern void clear_page(void *page); +extern void copy_page(void *to, void *from); + +/* + * If we have cache aliasing and writeback caches, we might have to do + * some extra work + */ + +#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK +void clear_user_page(void *addr, unsigned long vaddr, struct page* page); +void copy_user_page(void *to, void* from, unsigned long vaddr, struct page* page); +#else +# define clear_user_page(page,vaddr,pg) clear_page(page) +# define copy_user_page(to, from, vaddr, pg) copy_page(to, from) +#endif + + +/* + * This handles the memory map. We handle pages at + * XCHAL_KSEG_CACHED_VADDR for kernels with 32 bit address space. + * These macros are for conversion of kernel address, not user + * addresses. + */ + +#define __pa(x) ((unsigned long) (x) - PAGE_OFFSET) +#define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET)) +#define pfn_valid(pfn) ((unsigned long)pfn < max_mapnr) +#ifndef CONFIG_DISCONTIGMEM +# define pfn_to_page(pfn) (mem_map + (pfn)) +# define page_to_pfn(page) ((unsigned long)((page) - mem_map)) +#else +# error CONFIG_DISCONTIGMEM not supported +#endif + +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#define page_to_virt(page) __va(page_to_pfn(page) << PAGE_SHIFT) +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + +#define WANT_PAGE_VIRTUAL + + +#endif /* __ASSEMBLY__ */ + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#endif /* __KERNEL__ */ +#endif /* _XTENSA_PAGE_H */ diff --git a/include/asm-xtensa/param.h b/include/asm-xtensa/param.h new file mode 100644 index 000000000000..c0eec8260b0e --- /dev/null +++ b/include/asm-xtensa/param.h @@ -0,0 +1,34 @@ +/* + * include/asm-xtensa/param.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_PARAM_H +#define _XTENSA_PARAM_H + +#include + +#ifdef __KERNEL__ +# define HZ 100 /* internal timer frequency */ +# define USER_HZ 100 /* for user interfaces in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) /* frequnzy at which times() counts */ +#endif + +#define EXEC_PAGESIZE (1 << XCHAL_MMU_MIN_PTE_PAGE_SIZE) + +#ifndef NGROUPS +#define NGROUPS 32 +#endif + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _XTENSA_PARAM_H */ diff --git a/include/asm-xtensa/pci-bridge.h b/include/asm-xtensa/pci-bridge.h new file mode 100644 index 000000000000..00fcbd7c534a --- /dev/null +++ b/include/asm-xtensa/pci-bridge.h @@ -0,0 +1,88 @@ +/* + * include/asm-xtensa/pci-bridge.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_PCI_BRIDGE_H +#define _XTENSA_PCI_BRIDGE_H + +#ifdef __KERNEL__ + +struct device_node; +struct pci_controller; + +/* + * pciauto_bus_scan() enumerates the pci space. + */ + +extern int pciauto_bus_scan(struct pci_controller *, int); + +struct pci_space { + unsigned long start; + unsigned long end; + unsigned long base; +}; + +/* + * Structure of a PCI controller (host bridge) + */ + +struct pci_controller { + int index; /* used for pci_controller_num */ + struct pci_controller *next; + struct pci_bus *bus; + void *arch_data; + + int first_busno; + int last_busno; + + struct pci_ops *ops; + volatile unsigned int *cfg_addr; + volatile unsigned char *cfg_data; + + /* Currently, we limit ourselves to 1 IO range and 3 mem + * ranges since the common pci_bus structure can't handle more + */ + struct resource io_resource; + struct resource mem_resources[3]; + int mem_resource_count; + + /* Host bridge I/O and Memory space + * Used for BAR placement algorithms + */ + struct pci_space io_space; + struct pci_space mem_space; + + /* Return the interrupt number fo a device. */ + int (*map_irq)(struct pci_dev*, u8, u8); + +}; + +static inline void pcibios_init_resource(struct resource *res, + unsigned long start, unsigned long end, int flags, char *name) +{ + res->start = start; + res->end = end; + res->flags = flags; + res->name = name; + res->parent = NULL; + res->sibling = NULL; + res->child = NULL; +} + + +/* These are used for config access before all the PCI probing has been done. */ +int early_read_config_byte(struct pci_controller*, int, int, int, u8*); +int early_read_config_word(struct pci_controller*, int, int, int, u16*); +int early_read_config_dword(struct pci_controller*, int, int, int, u32*); +int early_write_config_byte(struct pci_controller*, int, int, int, u8); +int early_write_config_word(struct pci_controller*, int, int, int, u16); +int early_write_config_dword(struct pci_controller*, int, int, int, u32); + +#endif /* __KERNEL__ */ +#endif /* _XTENSA_PCI_BRIDGE_H */ diff --git a/include/asm-xtensa/pci.h b/include/asm-xtensa/pci.h new file mode 100644 index 000000000000..6817742301c2 --- /dev/null +++ b/include/asm-xtensa/pci.h @@ -0,0 +1,89 @@ +/* + * linux/include/asm-xtensa/pci.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_PCI_H +#define _XTENSA_PCI_H + +#ifdef __KERNEL__ + +/* Can be used to override the logic in pci_scan_bus for skipping + * already-configured bus numbers - to be used for buggy BIOSes + * or architectures with incomplete PCI setup by the loader + */ + +#define pcibios_assign_all_busses() 0 + +extern struct pci_controller* pcibios_alloc_controller(void); + +extern inline void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} + +extern inline void pcibios_penalize_isa_irq(int irq) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +/* Assume some values. (We should revise them, if necessary) */ + +#define PCIBIOS_MIN_IO 0x2000 +#define PCIBIOS_MIN_MEM 0x10000000 + +/* Dynamic DMA mapping stuff. + * Xtensa has everything mapped statically like x86. + */ + +#include +#include +#include +#include +#include + +struct pci_dev; + +/* The PCI address space does equal the physical memory address space. + * The networking and block device layers use this boolean for bounce buffer + * decisions. + */ + +#define PCI_DMA_BUS_IS_PHYS (1) + +/* pci_unmap_{page,single} is a no-op, so */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) +#define pci_unmap_addr(PTR, ADDR_NAME) (0) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) +#define pci_ubnmap_len(PTR, LEN_NAME) (0) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) + +/* We cannot access memory above 4GB */ +#define pci_dac_dma_supported(pci_dev, mask) (0) + +/* Map a range of PCI memory or I/O space for a device into user space */ +int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine); + +/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */ +#define HAVE_PCI_MMAP 1 + +static inline void pcibios_add_platform_entries(struct pci_dev *dev) +{ +} + +#endif /* __KERNEL__ */ + +/* Implement the pci_ DMA API in terms of the generic device dma_ one */ +#include + +/* Generic PCI */ +#include + +#endif /* _XTENSA_PCI_H */ diff --git a/include/asm-xtensa/percpu.h b/include/asm-xtensa/percpu.h new file mode 100644 index 000000000000..6d2bc2ada9d1 --- /dev/null +++ b/include/asm-xtensa/percpu.h @@ -0,0 +1,16 @@ +/* + * linux/include/asm-xtensa/percpu.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_PERCPU__ +#define _XTENSA_PERCPU__ + +#include + +#endif /* _XTENSA_PERCPU__ */ diff --git a/include/asm-xtensa/pgalloc.h b/include/asm-xtensa/pgalloc.h new file mode 100644 index 000000000000..734a8d060395 --- /dev/null +++ b/include/asm-xtensa/pgalloc.h @@ -0,0 +1,116 @@ +/* + * linux/include/asm-xtensa/pgalloc.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Copyright (C) 2001-2005 Tensilica Inc. + */ + +#ifndef _XTENSA_PGALLOC_H +#define _XTENSA_PGALLOC_H + +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + + +/* Cache aliasing: + * + * If the cache size for one way is greater than the page size, we have to + * deal with cache aliasing. The cache index is wider than the page size: + * + * |cache | + * |pgnum |page| virtual address + * |xxxxxX|zzzz| + * | | | + * \ / | | + * trans.| | + * / \ | | + * |yyyyyY|zzzz| physical address + * + * When the page number is translated to the physical page address, the lowest + * bit(s) (X) that are also part of the cache index are also translated (Y). + * If this translation changes this bit (X), the cache index is also afected, + * thus resulting in a different cache line than before. + * The kernel does not provide a mechanism to ensure that the page color + * (represented by this bit) remains the same when allocated or when pages + * are remapped. When user pages are mapped into kernel space, the color of + * the page might also change. + * + * We use the address space VMALLOC_END ... VMALLOC_END + DCACHE_WAY_SIZE * 2 + * to temporarily map a patch so we can match the color. + */ + +#if (DCACHE_WAY_SIZE > PAGE_SIZE) +# define PAGE_COLOR_MASK (PAGE_MASK & (DCACHE_WAY_SIZE-1)) +# define PAGE_COLOR(a) \ + (((unsigned long)(a)&PAGE_COLOR_MASK) >> PAGE_SHIFT) +# define PAGE_COLOR_EQ(a,b) \ + ((((unsigned long)(a) ^ (unsigned long)(b)) & PAGE_COLOR_MASK) == 0) +# define PAGE_COLOR_MAP0(v) \ + (VMALLOC_END + ((unsigned long)(v) & PAGE_COLOR_MASK)) +# define PAGE_COLOR_MAP1(v) \ + (VMALLOC_END + ((unsigned long)(v) & PAGE_COLOR_MASK) + DCACHE_WAY_SIZE) +#endif + +/* + * Allocating and freeing a pmd is trivial: the 1-entry pmd is + * inside the pgd, so has no extra memory associated with it. + */ + +#define pgd_free(pgd) free_page((unsigned long)(pgd)) + +#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK + +static inline void +pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *pte) +{ + pmd_val(*(pmdp)) = (unsigned long)(pte); + __asm__ __volatile__ ("memw; dhwb %0, 0; dsync" :: "a" (pmdp)); +} + +static inline void +pmd_populate(struct mm_struct *mm, pmd_t *pmdp, struct page *page) +{ + pmd_val(*(pmdp)) = (unsigned long)page_to_virt(page); + __asm__ __volatile__ ("memw; dhwb %0, 0; dsync" :: "a" (pmdp)); +} + + + +#else + +# define pmd_populate_kernel(mm, pmdp, pte) \ + (pmd_val(*(pmdp)) = (unsigned long)(pte)) +# define pmd_populate(mm, pmdp, page) \ + (pmd_val(*(pmdp)) = (unsigned long)page_to_virt(page)) + +#endif + +static inline pgd_t* +pgd_alloc(struct mm_struct *mm) +{ + pgd_t *pgd; + + pgd = (pgd_t *)__get_free_pages(GFP_KERNEL|__GFP_ZERO, PGD_ORDER); + + if (likely(pgd != NULL)) + __flush_dcache_page((unsigned long)pgd); + + return pgd; +} + +extern pte_t* pte_alloc_one_kernel(struct mm_struct* mm, unsigned long addr); +extern struct page* pte_alloc_one(struct mm_struct* mm, unsigned long addr); + +#define pte_free_kernel(pte) free_page((unsigned long)pte) +#define pte_free(pte) __free_page(pte) + +#endif /* __KERNEL__ */ +#endif /* _XTENSA_PGALLOC_H */ diff --git a/include/asm-xtensa/pgtable.h b/include/asm-xtensa/pgtable.h new file mode 100644 index 000000000000..0bb6416ae266 --- /dev/null +++ b/include/asm-xtensa/pgtable.h @@ -0,0 +1,468 @@ +/* + * linux/include/asm-xtensa/page.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version2 as + * published by the Free Software Foundation. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_PGTABLE_H +#define _XTENSA_PGTABLE_H + +#include +#include + +/* Assertions. */ + +#ifdef CONFIG_MMU + + +#if (XCHAL_MMU_RINGS < 2) +# error Linux build assumes at least 2 ring levels. +#endif + +#if (XCHAL_MMU_CA_BITS != 4) +# error We assume exactly four bits for CA. +#endif + +#if (XCHAL_MMU_SR_BITS != 0) +# error We have no room for SR bits. +#endif + +/* + * Use the first min-wired way for mapping page-table pages. + * Page coloring requires a second min-wired way. + */ + +#if (XCHAL_DTLB_MINWIRED_SETS == 0) +# error Need a min-wired way for mapping page-table pages +#endif + +#define DTLB_WAY_PGTABLE XCHAL_DTLB_SET(XCHAL_DTLB_MINWIRED_SET0, WAY) + +#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK +# if XCHAL_DTLB_SET(XCHAL_DTLB_MINWIRED_SET0, WAYS) >= 2 +# define DTLB_WAY_DCACHE_ALIAS0 (DTLB_WAY_PGTABLE + 1) +# define DTLB_WAY_DCACHE_ALIAS1 (DTLB_WAY_PGTABLE + 2) +# else +# error Page coloring requires its own wired dtlb way! +# endif +#endif + +#endif /* CONFIG_MMU */ + +/* + * We only use two ring levels, user and kernel space. + */ + +#define USER_RING 1 /* user ring level */ +#define KERNEL_RING 0 /* kernel ring level */ + +/* + * The Xtensa architecture port of Linux has a two-level page table system, + * i.e. the logical three-level Linux page table layout are folded. + * Each task has the following memory page tables: + * + * PGD table (page directory), ie. 3rd-level page table: + * One page (4 kB) of 1024 (PTRS_PER_PGD) pointers to PTE tables + * (Architectures that don't have the PMD folded point to the PMD tables) + * + * The pointer to the PGD table for a given task can be retrieved from + * the task structure (struct task_struct*) t, e.g. current(): + * (t->mm ? t->mm : t->active_mm)->pgd + * + * PMD tables (page middle-directory), ie. 2nd-level page tables: + * Absent for the Xtensa architecture (folded, PTRS_PER_PMD == 1). + * + * PTE tables (page table entry), ie. 1st-level page tables: + * One page (4 kB) of 1024 (PTRS_PER_PTE) PTEs with a special PTE + * invalid_pte_table for absent mappings. + * + * The individual pages are 4 kB big with special pages for the empty_zero_page. + */ +#define PGDIR_SHIFT 22 +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * Entries per page directory level: we use two-level, so + * we don't really have any PMD directory physically. + */ +#define PTRS_PER_PTE 1024 +#define PTRS_PER_PTE_SHIFT 10 +#define PTRS_PER_PMD 1 +#define PTRS_PER_PGD 1024 +#define PGD_ORDER 0 +#define PMD_ORDER 0 +#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) +#define FIRST_USER_ADDRESS XCHAL_SEG_MAPPABLE_VADDR +#define FIRST_USER_PGD_NR (FIRST_USER_ADDRESS >> PGDIR_SHIFT) + +/* virtual memory area. We keep a distance to other memory regions to be + * on the safe side. We also use this area for cache aliasing. + */ + +// FIXME: virtual memory area must be configuration-dependent + +#define VMALLOC_START 0xC0000000 +#define VMALLOC_END 0xC7FF0000 + +/* Xtensa Linux config PTE layout (when present): + * 31-12: PPN + * 11-6: Software + * 5-4: RING + * 3-0: CA + * + * Similar to the Alpha and MIPS ports, we need to keep track of the ref + * and mod bits in software. We have a software "you can read + * from this page" bit, and a hardware one which actually lets the + * process read from the page. On the same token we have a software + * writable bit and the real hardware one which actually lets the + * process write to the page. + * + * See further below for PTE layout for swapped-out pages. + */ + +#define _PAGE_VALID (1<<0) /* hardware: page is accessible */ +#define _PAGE_WRENABLE (1<<1) /* hardware: page is writable */ + +/* None of these cache modes include MP coherency: */ +#define _PAGE_NO_CACHE (0<<2) /* bypass, non-speculative */ +#if XCHAL_DCACHE_IS_WRITEBACK +# define _PAGE_WRITEBACK (1<<2) /* write back */ +# define _PAGE_WRITETHRU (2<<2) /* write through */ +#else +# define _PAGE_WRITEBACK (1<<2) /* assume write through */ +# define _PAGE_WRITETHRU (1<<2) +#endif +#define _PAGE_NOALLOC (3<<2) /* don't allocate cache,if not cached */ +#define _CACHE_MASK (3<<2) + +#define _PAGE_USER (1<<4) /* user access (ring=1) */ +#define _PAGE_KERNEL (0<<4) /* kernel access (ring=0) */ + +/* Software */ +#define _PAGE_RW (1<<6) /* software: page writable */ +#define _PAGE_DIRTY (1<<7) /* software: page dirty */ +#define _PAGE_ACCESSED (1<<8) /* software: page accessed (read) */ +#define _PAGE_FILE (1<<9) /* nonlinear file mapping*/ + +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _CACHE_MASK | _PAGE_DIRTY) +#define _PAGE_PRESENT ( _PAGE_VALID | _PAGE_WRITEBACK | _PAGE_ACCESSED) + +#ifdef CONFIG_MMU + +# define PAGE_NONE __pgprot(_PAGE_PRESENT) +# define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_RW) +# define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER) +# define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER) +# define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_KERNEL | _PAGE_WRENABLE) +# define PAGE_INVALID __pgprot(_PAGE_USER) + +# if (DCACHE_WAY_SIZE > PAGE_SIZE) +# define PAGE_DIRECTORY __pgprot(_PAGE_VALID | _PAGE_ACCESSED | _PAGE_KERNEL) +# else +# define PAGE_DIRECTORY __pgprot(_PAGE_PRESENT | _PAGE_KERNEL) +# endif + +#else /* no mmu */ + +# define PAGE_NONE __pgprot(0) +# define PAGE_SHARED __pgprot(0) +# define PAGE_COPY __pgprot(0) +# define PAGE_READONLY __pgprot(0) +# define PAGE_KERNEL __pgprot(0) + +#endif + +/* + * On certain configurations of Xtensa MMUs (eg. the initial Linux config), + * the MMU can't do page protection for execute, and considers that the same as + * read. Also, write permissions may imply read permissions. + * What follows is the closest we can get by reasonable means.. + * See linux/mm/mmap.c for protection_map[] array that uses these definitions. + */ +#define __P000 PAGE_NONE /* private --- */ +#define __P001 PAGE_READONLY /* private --r */ +#define __P010 PAGE_COPY /* private -w- */ +#define __P011 PAGE_COPY /* private -wr */ +#define __P100 PAGE_READONLY /* private x-- */ +#define __P101 PAGE_READONLY /* private x-r */ +#define __P110 PAGE_COPY /* private xw- */ +#define __P111 PAGE_COPY /* private xwr */ + +#define __S000 PAGE_NONE /* shared --- */ +#define __S001 PAGE_READONLY /* shared --r */ +#define __S010 PAGE_SHARED /* shared -w- */ +#define __S011 PAGE_SHARED /* shared -wr */ +#define __S100 PAGE_READONLY /* shared x-- */ +#define __S101 PAGE_READONLY /* shared x-r */ +#define __S110 PAGE_SHARED /* shared xw- */ +#define __S111 PAGE_SHARED /* shared xwr */ + +#ifndef __ASSEMBLY__ + +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd entry %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +extern unsigned long empty_zero_page[1024]; + +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) + +extern pgd_t swapper_pg_dir[PAGE_SIZE/sizeof(pgd_t)]; + +/* + * The pmd contains the kernel virtual address of the pte page. + */ +#define pmd_page_kernel(pmd) ((unsigned long)(pmd_val(pmd) & PAGE_MASK)) +#define pmd_page(pmd) virt_to_page(pmd_val(pmd)) + +/* + * The following only work if pte_present() is true. + */ +#define pte_none(pte) (!(pte_val(pte) ^ _PAGE_USER)) +#define pte_present(pte) (pte_val(pte) & _PAGE_VALID) +#define pte_clear(mm,addr,ptep) \ + do { update_pte(ptep, __pte(_PAGE_USER)); } while(0) + +#define pmd_none(pmd) (!pmd_val(pmd)) +#define pmd_present(pmd) (pmd_val(pmd) & PAGE_MASK) +#define pmd_clear(pmdp) do { set_pmd(pmdp, __pmd(0)); } while (0) +#define pmd_bad(pmd) (pmd_val(pmd) & ~PAGE_MASK) + +/* Note: We use the _PAGE_USER bit to indicate write-protect kernel memory */ + +static inline int pte_read(pte_t pte) { return pte_val(pte) & _PAGE_USER; } +static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; } +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } +static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } +static inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) &= ~(_PAGE_RW | _PAGE_WRENABLE); return pte; } +static inline pte_t pte_rdprotect(pte_t pte) { pte_val(pte) &= ~_PAGE_USER; return pte; } +static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; } +static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkread(pte_t pte) { pte_val(pte) |= _PAGE_USER; return pte; } +static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; } +static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) |= _PAGE_RW; return pte; } + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) +#define pte_same(a,b) (pte_val(a) == pte_val(b)) +#define pte_page(x) pfn_to_page(pte_pfn(x)) +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot) + +extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)); +} + +/* + * Certain architectures need to do special things when pte's + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +static inline void update_pte(pte_t *ptep, pte_t pteval) +{ + *ptep = pteval; +#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK + __asm__ __volatile__ ("memw; dhwb %0, 0; dsync" :: "a" (ptep)); +#endif +} + +extern inline void +set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval) +{ + update_pte(ptep, pteval); +} + + +extern inline void +set_pmd(pmd_t *pmdp, pmd_t pmdval) +{ + *pmdp = pmdval; +#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK + __asm__ __volatile__ ("memw; dhwb %0, 0; dsync" :: "a" (pmdp)); +#endif +} + + +static inline int +ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, + pte_t *ptep) +{ + pte_t pte = *ptep; + if (!pte_young(pte)) + return 0; + update_pte(ptep, pte_mkold(pte)); + return 1; +} + +static inline int +ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr, + pte_t *ptep) +{ + pte_t pte = *ptep; + if (!pte_dirty(pte)) + return 0; + update_pte(ptep, pte_mkclean(pte)); + return 1; +} + +static inline pte_t +ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + pte_t pte = *ptep; + pte_clear(mm, addr, ptep); + return pte; +} + +static inline void +ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + pte_t pte = *ptep; + update_pte(ptep, pte_wrprotect(pte)); +} + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* to find an entry in a page-table-directory */ +#define pgd_offset(mm,address) ((mm)->pgd + pgd_index(address)) + +#define pgd_index(address) ((address) >> PGDIR_SHIFT) + +/* Find an entry in the second-level page table.. */ +#define pmd_offset(dir,address) ((pmd_t*)(dir)) + +/* Find an entry in the third-level page table.. */ +#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset_kernel(dir,addr) \ + ((pte_t*) pmd_page_kernel(*(dir)) + pte_index(addr)) +#define pte_offset_map(dir,addr) pte_offset_kernel((dir),(addr)) +#define pte_offset_map_nested(dir,addr) pte_offset_kernel((dir),(addr)) + +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + + +/* + * Encode and decode a swap entry. + * Each PTE in a process VM's page table is either: + * "present" -- valid and not swapped out, protection bits are meaningful; + * "not present" -- which further subdivides in these two cases: + * "none" -- no mapping at all; identified by pte_none(), set by pte_clear( + * "swapped out" -- the page is swapped out, and the SWP macros below + * are used to store swap file info in the PTE itself. + * + * In the Xtensa processor MMU, any PTE entries in user space (or anywhere + * in virtual memory that can map differently across address spaces) + * must have a correct ring value that represents the RASID field that + * is changed when switching address spaces. Eg. such PTE entries cannot + * be set to ring zero, because that can cause a (global) kernel ASID + * entry to be created in the TLBs (even with invalid cache attribute), + * potentially causing a multihit exception when going back to another + * address space that mapped the same virtual address at another ring. + * + * SO: we avoid using ring bits (_PAGE_RING_MASK) in "not present" PTEs. + * We also avoid using the _PAGE_VALID bit which must be zero for non-present + * pages. + * + * We end up with the following available bits: 1..3 and 7..31. + * We don't bother with 1..3 for now (we can use them later if needed), + * and chose to allocate 6 bits for SWP_TYPE and the remaining 19 bits + * for SWP_OFFSET. At least 5 bits are needed for SWP_TYPE, because it + * is currently implemented as an index into swap_info[MAX_SWAPFILES] + * and MAX_SWAPFILES is currently defined as 32 in . + * However, for some reason all other architectures in the 2.4 kernel + * reserve either 6, 7, or 8 bits so I'll not detract from that for now. :) + * SWP_OFFSET is an offset into the swap file in page-size units, so + * with 4 kB pages, 19 bits supports a maximum swap file size of 2 GB. + * + * FIXME: 2 GB isn't very big. Other bits can be used to allow + * larger swap sizes. In the meantime, it appears relatively easy to get + * around the 2 GB limitation by simply using multiple swap files. + */ + +#define __swp_type(entry) (((entry).val >> 7) & 0x3f) +#define __swp_offset(entry) ((entry).val >> 13) +#define __swp_entry(type,offs) ((swp_entry_t) {((type) << 7) | ((offs) << 13)}) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +#define PTE_FILE_MAX_BITS 29 +#define pte_to_pgoff(pte) (pte_val(pte) >> 3) +#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE }) + + +#endif /* !defined (__ASSEMBLY__) */ + + +#ifdef __ASSEMBLY__ + +/* Assembly macro _PGD_INDEX is the same as C pgd_index(unsigned long), + * _PGD_OFFSET as C pgd_offset(struct mm_struct*, unsigned long), + * _PMD_OFFSET as C pmd_offset(pgd_t*, unsigned long) + * _PTE_OFFSET as C pte_offset(pmd_t*, unsigned long) + * + * Note: We require an additional temporary register which can be the same as + * the register that holds the address. + * + * ((pte_t*) ((unsigned long)(pmd_val(*pmd) & PAGE_MASK)) + pte_index(addr)) + * + */ +#define _PGD_INDEX(rt,rs) extui rt, rs, PGDIR_SHIFT, 32-PGDIR_SHIFT +#define _PTE_INDEX(rt,rs) extui rt, rs, PAGE_SHIFT, PTRS_PER_PTE_SHIFT + +#define _PGD_OFFSET(mm,adr,tmp) l32i mm, mm, MM_PGD; \ + _PGD_INDEX(tmp, adr); \ + addx4 mm, tmp, mm + +#define _PTE_OFFSET(pmd,adr,tmp) _PTE_INDEX(tmp, adr); \ + srli pmd, pmd, PAGE_SHIFT; \ + slli pmd, pmd, PAGE_SHIFT; \ + addx4 pmd, tmp, pmd + +#else + +extern void paging_init(void); + +#define kern_addr_valid(addr) (1) + +extern void update_mmu_cache(struct vm_area_struct * vma, + unsigned long address, pte_t pte); + +/* + * remap a physical address `phys' of size `size' with page protection `prot' + * into virtual address `from' + */ +#define io_remap_page_range(vma,from,phys,size,prot) \ + remap_pfn_range(vma, from, (phys) >> PAGE_SHIFT, size, prot) + + +/* No page table caches to init */ + +#define pgtable_cache_init() do { } while (0) + +typedef pte_t *pte_addr_t; + +#endif /* !defined (__ASSEMBLY__) */ + +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +#define __HAVE_ARCH_PTEP_MKDIRTY +#define __HAVE_ARCH_PTE_SAME + +#include + +#endif /* _XTENSA_PGTABLE_H */ diff --git a/include/asm-xtensa/poll.h b/include/asm-xtensa/poll.h new file mode 100644 index 000000000000..dffe447534e0 --- /dev/null +++ b/include/asm-xtensa/poll.h @@ -0,0 +1,37 @@ +/* + * include/asm-xtensa/poll.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_POLL_H +#define _XTENSA_POLL_H + + +#define POLLIN 0x0001 +#define POLLPRI 0x0002 +#define POLLOUT 0x0004 + +#define POLLERR 0x0008 +#define POLLHUP 0x0010 +#define POLLNVAL 0x0020 + +#define POLLRDNORM 0x0040 +#define POLLRDBAND 0x0080 +#define POLLWRNORM POLLOUT +#define POLLWRBAND 0x0100 + +#define POLLMSG 0x0400 +#define POLLREMOVE 0x0800 + +struct pollfd { + int fd; + short events; + short revents; +}; + +#endif /* _XTENSA_POLL_H */ diff --git a/include/asm-xtensa/posix_types.h b/include/asm-xtensa/posix_types.h new file mode 100644 index 000000000000..2c816b0e7762 --- /dev/null +++ b/include/asm-xtensa/posix_types.h @@ -0,0 +1,123 @@ +/* + * include/asm-xtensa/posix_types.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Largely copied from include/asm-ppc/posix_types.h + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_POSIX_TYPES_H +#define _XTENSA_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned int __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned int __kernel_uid_t; +typedef unsigned int __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef long __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#ifndef __GNUC__ + +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) +#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) +#define __FD_ZERO(set) \ + ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set))) + +#else /* __GNUC__ */ + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) \ + || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0) +/* With GNU C, use inline functions instead so args are evaluated only once: */ + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] |= (1UL<<_rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); +} + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *p) +{ + unsigned int *tmp = (unsigned int *)p->fds_bits; + int i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 8: + tmp[0] = 0; tmp[1] = 0; tmp[2] = 0; tmp[3] = 0; + tmp[4] = 0; tmp[5] = 0; tmp[6] = 0; tmp[7] = 0; + return; + } + } + i = __FDSET_LONGS; + while (i) { + i--; + *tmp = 0; + tmp++; + } +} + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ +#endif /* __GNUC__ */ +#endif /* _XTENSA_POSIX_TYPES_H */ diff --git a/include/asm-xtensa/processor.h b/include/asm-xtensa/processor.h new file mode 100644 index 000000000000..9cab5e4298b9 --- /dev/null +++ b/include/asm-xtensa/processor.h @@ -0,0 +1,205 @@ +/* + * include/asm-xtensa/processor.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_PROCESSOR_H +#define _XTENSA_PROCESSOR_H + +#ifdef __ASSEMBLY__ +#define _ASMLANGUAGE +#endif + +#include +#include +#include +#include + +#include +#include +#include + +/* Assertions. */ + +#if (XCHAL_HAVE_WINDOWED != 1) +#error Linux requires the Xtensa Windowed Registers Option. +#endif + +/* + * User space process size: 1 GB. + * Windowed call ABI requires caller and callee to be located within the same + * 1 GB region. The C compiler places trampoline code on the stack for sources + * that take the address of a nested C function (a feature used by glibc), so + * the 1 GB requirement applies to the stack as well. + */ + +#define TASK_SIZE 0x40000000 + +/* + * General exception cause assigned to debug exceptions. Debug exceptions go + * to their own vector, rather than the general exception vectors (user, + * kernel, double); and their specific causes are reported via DEBUGCAUSE + * rather than EXCCAUSE. However it is sometimes convenient to redirect debug + * exceptions to the general exception mechanism. To do this, an otherwise + * unused EXCCAUSE value was assigned to debug exceptions for this purpose. + */ + +#define EXCCAUSE_MAPPED_DEBUG 63 + +/* + * We use DEPC also as a flag to distinguish between double and regular + * exceptions. For performance reasons, DEPC might contain the value of + * EXCCAUSE for regular exceptions, so we use this definition to mark a + * valid double exception address. + * (Note: We use it in bgeui, so it should be 64, 128, or 256) + */ + +#define VALID_DOUBLE_EXCEPTION_ADDRESS 64 + +/* LOCKLEVEL defines the interrupt level that masks all + * general-purpose interrupts. + */ +#define LOCKLEVEL 1 + +/* WSBITS and WBBITS are the width of the WINDOWSTART and WINDOWBASE + * registers + */ +#define WSBITS (XCHAL_NUM_AREGS / 4) /* width of WINDOWSTART in bits */ +#define WBBITS (XCHAL_NUM_AREGS_LOG2 - 2) /* width of WINDOWBASE in bits */ + +#ifndef __ASSEMBLY__ + +/* Build a valid return address for the specified call winsize. + * winsize must be 1 (call4), 2 (call8), or 3 (call12) + */ +#define MAKE_RA_FOR_CALL(ra,ws) (((ra) & 0x3fffffff) | (ws) << 30) + +/* Convert return address to a valid pc + * Note: We assume that the stack pointer is in the same 1GB ranges as the ra + */ +#define MAKE_PC_FROM_RA(ra,sp) (((ra) & 0x3fffffff) | ((sp) & 0xc0000000)) + +typedef struct { + unsigned long seg; +} mm_segment_t; + +struct thread_struct { + + /* kernel's return address and stack pointer for context switching */ + unsigned long ra; /* kernel's a0: return address and window call size */ + unsigned long sp; /* kernel's a1: stack pointer */ + + mm_segment_t current_ds; /* see uaccess.h for example uses */ + + /* struct xtensa_cpuinfo info; */ + + unsigned long bad_vaddr; /* last user fault */ + unsigned long bad_uaddr; /* last kernel fault accessing user space */ + unsigned long error_code; + + unsigned long ibreak[XCHAL_NUM_IBREAK]; + unsigned long dbreaka[XCHAL_NUM_DBREAK]; + unsigned long dbreakc[XCHAL_NUM_DBREAK]; + + /* Allocate storage for extra state and coprocessor state. */ + unsigned char cp_save[XTENSA_CP_EXTRA_SIZE] + __attribute__ ((aligned(XTENSA_CP_EXTRA_ALIGN))); + + /* Make structure 16 bytes aligned. */ + int align[0] __attribute__ ((aligned(16))); +}; + + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE (TASK_SIZE / 2) + +#define INIT_THREAD \ +{ \ + ra: 0, \ + sp: sizeof(init_stack) + (long) &init_stack, \ + current_ds: {0}, \ + /*info: {0}, */ \ + bad_vaddr: 0, \ + bad_uaddr: 0, \ + error_code: 0, \ +} + + +/* + * Do necessary setup to start up a newly executed thread. + * Note: We set-up ps as if we did a call4 to the new pc. + * set_thread_state in signal.c depends on it. + */ +#define USER_PS_VALUE ( (1 << XCHAL_PS_WOE_SHIFT) + \ + (1 << XCHAL_PS_CALLINC_SHIFT) + \ + (USER_RING << XCHAL_PS_RING_SHIFT) + \ + (1 << XCHAL_PS_PROGSTACK_SHIFT) + \ + (1 << XCHAL_PS_EXCM_SHIFT) ) + +/* Clearing a0 terminates the backtrace. */ +#define start_thread(regs, new_pc, new_sp) \ + regs->pc = new_pc; \ + regs->ps = USER_PS_VALUE; \ + regs->areg[1] = new_sp; \ + regs->areg[0] = 0; \ + regs->wmask = 1; \ + regs->depc = 0; \ + regs->windowbase = 0; \ + regs->windowstart = 1; + +/* Forward declaration */ +struct task_struct; +struct mm_struct; + +// FIXME: do we need release_thread for CP?? +/* Free all resources held by a thread. */ +#define release_thread(thread) do { } while(0) + +// FIXME: do we need prepare_to_copy (lazy status) for CP?? +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +/* + * create a kernel thread without removing it from tasklists + */ +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +/* Copy and release all segment info associated with a VM */ + +#define copy_segments(p, mm) do { } while(0) +#define release_segments(mm) do { } while(0) +#define forget_segments() do { } while (0) + +#define thread_saved_pc(tsk) (xtensa_pt_regs(tsk)->pc) + +extern unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) (xtensa_pt_regs(tsk)->pc) +#define KSTK_ESP(tsk) (xtensa_pt_regs(tsk)->areg[1]) + +#define cpu_relax() do { } while (0) + +/* Special register access. */ + +#define WSR(v,sr) __asm__ __volatile__ ("wsr %0,"__stringify(sr) :: "a"(v)); +#define RSR(v,sr) __asm__ __volatile__ ("rsr %0,"__stringify(sr) : "=a"(v)); + +#define set_sr(x,sr) ({unsigned int v=(unsigned int)x; WSR(v,sr);}) +#define get_sr(sr) ({unsigned int v; RSR(v,sr); v; }) + +#endif /* __ASSEMBLY__ */ +#endif /* _XTENSA_PROCESSOR_H */ diff --git a/include/asm-xtensa/ptrace.h b/include/asm-xtensa/ptrace.h new file mode 100644 index 000000000000..2848a5ff8349 --- /dev/null +++ b/include/asm-xtensa/ptrace.h @@ -0,0 +1,135 @@ +/* + * include/asm-xtensa/ptrace.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_PTRACE_H +#define _XTENSA_PTRACE_H + +#include + +/* + * Kernel stack + * + * +-----------------------+ -------- STACK_SIZE + * | register file | | + * +-----------------------+ | + * | struct pt_regs | | + * +-----------------------+ | ------ PT_REGS_OFFSET + * double : 16 bytes spill area : | ^ + * excetion :- - - - - - - - - - - -: | | + * frame : struct pt_regs : | | + * :- - - - - - - - - - - -: | | + * | | | | + * | memory stack | | | + * | | | | + * ~ ~ ~ ~ + * ~ ~ ~ ~ + * | | | | + * | | | | + * +-----------------------+ | | --- STACK_BIAS + * | struct task_struct | | | ^ + * current --> +-----------------------+ | | | + * | struct thread_info | | | | + * +-----------------------+ -------- + */ + +#define KERNEL_STACK_SIZE (2 * PAGE_SIZE) + +/* Offsets for exception_handlers[] (3 x 64-entries x 4-byte tables). */ + +#define EXC_TABLE_KSTK 0x004 /* Kernel Stack */ +#define EXC_TABLE_DOUBLE_SAVE 0x008 /* Double exception save area for a0 */ +#define EXC_TABLE_FIXUP 0x00c /* Fixup handler */ +#define EXC_TABLE_PARAM 0x010 /* For passing a parameter to fixup */ +#define EXC_TABLE_SYSCALL_SAVE 0x014 /* For fast syscall handler */ +#define EXC_TABLE_FAST_USER 0x100 /* Fast user exception handler */ +#define EXC_TABLE_FAST_KERNEL 0x200 /* Fast kernel exception handler */ +#define EXC_TABLE_DEFAULT 0x300 /* Default C-Handler */ +#define EXC_TABLE_SIZE 0x400 + +/* Registers used by strace */ + +#define REG_A_BASE 0xfc000000 +#define REG_AR_BASE 0x04000000 +#define REG_PC 0x14000000 +#define REG_PS 0x080000e6 +#define REG_WB 0x08000048 +#define REG_WS 0x08000049 +#define REG_LBEG 0x08000000 +#define REG_LEND 0x08000001 +#define REG_LCOUNT 0x08000002 +#define REG_SAR 0x08000003 +#define REG_DEPC 0x080000c0 +#define REG_EXCCAUSE 0x080000e8 +#define REG_EXCVADDR 0x080000ee +#define SYSCALL_NR 0x1 + +#define AR_REGNO_TO_A_REGNO(ar, wb) (ar - wb*4) & ~(XCHAL_NUM_AREGS - 1) + +/* Other PTRACE_ values defined in using values 0-9,16,17,24 */ + +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +#define PTRACE_GETFPREGSIZE 18 + +#ifndef __ASSEMBLY__ + +/* + * This struct defines the way the registers are stored on the + * kernel stack during a system call or other kernel entry. + */ +struct pt_regs { + unsigned long pc; /* 4 */ + unsigned long ps; /* 8 */ + unsigned long depc; /* 12 */ + unsigned long exccause; /* 16 */ + unsigned long excvaddr; /* 20 */ + unsigned long debugcause; /* 24 */ + unsigned long wmask; /* 28 */ + unsigned long lbeg; /* 32 */ + unsigned long lend; /* 36 */ + unsigned long lcount; /* 40 */ + unsigned long sar; /* 44 */ + unsigned long windowbase; /* 48 */ + unsigned long windowstart; /* 52 */ + unsigned long syscall; /* 56 */ + int reserved[2]; /* 64 */ + + /* Make sure the areg field is 16 bytes aligned. */ + int align[0] __attribute__ ((aligned(16))); + + /* current register frame. + * Note: The ESF for kernel exceptions ends after 16 registers! + */ + unsigned long areg[16]; /* 128 (64) */ +}; + +#ifdef __KERNEL__ +# define xtensa_pt_regs(tsk) ((struct pt_regs*) \ + (((long)(tsk)->thread_info + KERNEL_STACK_SIZE - (XCHAL_NUM_AREGS-16)*4)) - 1) +# define user_mode(regs) (((regs)->ps & 0x00000020)!=0) +# define instruction_pointer(regs) ((regs)->pc) +extern void show_regs(struct pt_regs *); + +# ifndef CONFIG_SMP +# define profile_pc(regs) instruction_pointer(regs) +# endif +#endif /* __KERNEL__ */ + +#else /* __ASSEMBLY__ */ + +#ifdef __KERNEL__ +# include +#define PT_REGS_OFFSET (KERNEL_STACK_SIZE - PT_USER_SIZE) +#endif + +#endif /* !__ASSEMBLY__ */ +#endif /* _XTENSA_PTRACE_H */ diff --git a/include/asm-xtensa/resource.h b/include/asm-xtensa/resource.h new file mode 100644 index 000000000000..17b5ab311771 --- /dev/null +++ b/include/asm-xtensa/resource.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/resource.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_RESOURCE_H +#define _XTENSA_RESOURCE_H + +#include + +#endif /* _XTENSA_RESOURCE_H */ diff --git a/include/asm-xtensa/rmap.h b/include/asm-xtensa/rmap.h new file mode 100644 index 000000000000..649588b7e9ad --- /dev/null +++ b/include/asm-xtensa/rmap.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/rmap.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_RMAP_H +#define _XTENSA_RMAP_H + +#include + +#endif diff --git a/include/asm-xtensa/rwsem.h b/include/asm-xtensa/rwsem.h new file mode 100644 index 000000000000..3c02b0e033f0 --- /dev/null +++ b/include/asm-xtensa/rwsem.h @@ -0,0 +1,175 @@ +/* + * include/asm-xtensa/rwsem.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Largely copied from include/asm-ppc/rwsem.h + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_RWSEM_H +#define _XTENSA_RWSEM_H + +#include +#include +#include +#include + +/* + * the semaphore definition + */ +struct rw_semaphore { + signed long count; +#define RWSEM_UNLOCKED_VALUE 0x00000000 +#define RWSEM_ACTIVE_BIAS 0x00000001 +#define RWSEM_ACTIVE_MASK 0x0000ffff +#define RWSEM_WAITING_BIAS (-0x00010000) +#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS +#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) + spinlock_t wait_lock; + struct list_head wait_list; +#if RWSEM_DEBUG + int debug; +#endif +}; + +/* + * initialisation + */ +#if RWSEM_DEBUG +#define __RWSEM_DEBUG_INIT , 0 +#else +#define __RWSEM_DEBUG_INIT /* */ +#endif + +#define __RWSEM_INITIALIZER(name) \ + { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ + LIST_HEAD_INIT((name).wait_list) \ + __RWSEM_DEBUG_INIT } + +#define DECLARE_RWSEM(name) \ + struct rw_semaphore name = __RWSEM_INITIALIZER(name) + +extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); + +static inline void init_rwsem(struct rw_semaphore *sem) +{ + sem->count = RWSEM_UNLOCKED_VALUE; + spin_lock_init(&sem->wait_lock); + INIT_LIST_HEAD(&sem->wait_list); +#if RWSEM_DEBUG + sem->debug = 0; +#endif +} + +/* + * lock for reading + */ +static inline void __down_read(struct rw_semaphore *sem) +{ + if (atomic_add_return(1,(atomic_t *)(&sem->count)) > 0) + smp_wmb(); + else + rwsem_down_read_failed(sem); +} + +static inline int __down_read_trylock(struct rw_semaphore *sem) +{ + int tmp; + + while ((tmp = sem->count) >= 0) { + if (tmp == cmpxchg(&sem->count, tmp, + tmp + RWSEM_ACTIVE_READ_BIAS)) { + smp_wmb(); + return 1; + } + } + return 0; +} + +/* + * lock for writing + */ +static inline void __down_write(struct rw_semaphore *sem) +{ + int tmp; + + tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS, + (atomic_t *)(&sem->count)); + if (tmp == RWSEM_ACTIVE_WRITE_BIAS) + smp_wmb(); + else + rwsem_down_write_failed(sem); +} + +static inline int __down_write_trylock(struct rw_semaphore *sem) +{ + int tmp; + + tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE, + RWSEM_ACTIVE_WRITE_BIAS); + smp_wmb(); + return tmp == RWSEM_UNLOCKED_VALUE; +} + +/* + * unlock after reading + */ +static inline void __up_read(struct rw_semaphore *sem) +{ + int tmp; + + smp_wmb(); + tmp = atomic_sub_return(1,(atomic_t *)(&sem->count)); + if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0) + rwsem_wake(sem); +} + +/* + * unlock after writing + */ +static inline void __up_write(struct rw_semaphore *sem) +{ + smp_wmb(); + if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS, + (atomic_t *)(&sem->count)) < 0) + rwsem_wake(sem); +} + +/* + * implement atomic add functionality + */ +static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) +{ + atomic_add(delta, (atomic_t *)(&sem->count)); +} + +/* + * downgrade write lock to read lock + */ +static inline void __downgrade_write(struct rw_semaphore *sem) +{ + int tmp; + + smp_wmb(); + tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count)); + if (tmp < 0) + rwsem_downgrade_wake(sem); +} + +/* + * implement exchange and add functionality + */ +static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) +{ + smp_mb(); + return atomic_add_return(delta, (atomic_t *)(&sem->count)); +} + +#endif /* _XTENSA_RWSEM_XADD_H */ diff --git a/include/asm-xtensa/scatterlist.h b/include/asm-xtensa/scatterlist.h new file mode 100644 index 000000000000..38a2b9acd658 --- /dev/null +++ b/include/asm-xtensa/scatterlist.h @@ -0,0 +1,34 @@ +/* + * include/asm-xtensa/scatterlist.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SCATTERLIST_H +#define _XTENSA_SCATTERLIST_H + +struct scatterlist { + struct page *page; + unsigned int offset; + dma_addr_t dma_address; + unsigned int length; +}; + +/* + * These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns, or alternatively stop on the first sg_dma_len(sg) which + * is 0. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + + +#define ISA_DMA_THRESHOLD (~0UL) + +#endif /* _XTENSA_SCATTERLIST_H */ diff --git a/include/asm-xtensa/sections.h b/include/asm-xtensa/sections.h new file mode 100644 index 000000000000..40b5191b55a2 --- /dev/null +++ b/include/asm-xtensa/sections.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/sections.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SECTIONS_H +#define _XTENSA_SECTIONS_H + +#include + +#endif /* _XTENSA_SECTIONS_H */ diff --git a/include/asm-xtensa/segment.h b/include/asm-xtensa/segment.h new file mode 100644 index 000000000000..a2eb547a1a75 --- /dev/null +++ b/include/asm-xtensa/segment.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/segment.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SEGMENT_H +#define _XTENSA_SEGMENT_H + +#include + +#endif /* _XTENSA_SEGEMENT_H */ diff --git a/include/asm-xtensa/semaphore.h b/include/asm-xtensa/semaphore.h new file mode 100644 index 000000000000..c8a7574a9a57 --- /dev/null +++ b/include/asm-xtensa/semaphore.h @@ -0,0 +1,129 @@ +/* + * linux/include/asm-xtensa/semaphore.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SEMAPHORE_H +#define _XTENSA_SEMAPHORE_H + +#include +#include +#include +#include + +struct semaphore { + atomic_t count; + int sleepers; + wait_queue_head_t wait; +#if WAITQUEUE_DEBUG + long __magic; +#endif +}; + +#if WAITQUEUE_DEBUG +# define __SEM_DEBUG_INIT(name) \ + , (int)&(name).__magic +#else +# define __SEM_DEBUG_INIT(name) +#endif + +#define __SEMAPHORE_INITIALIZER(name,count) \ + { ATOMIC_INIT(count), \ + 0, \ + __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \ + __SEM_DEBUG_INIT(name) } + +#define __MUTEX_INITIALIZER(name) \ + __SEMAPHORE_INITIALIZER(name, 1) + +#define __DECLARE_SEMAPHORE_GENERIC(name,count) \ + struct semaphore name = __SEMAPHORE_INITIALIZER(name,count) + +#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1) +#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0) + +extern inline void sema_init (struct semaphore *sem, int val) +{ +/* + * *sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val); + * + * i'd rather use the more flexible initialization above, but sadly + * GCC 2.7.2.3 emits a bogus warning. EGCS doesnt. Oh well. + */ + atomic_set(&sem->count, val); + init_waitqueue_head(&sem->wait); +#if WAITQUEUE_DEBUG + sem->__magic = (int)&sem->__magic; +#endif +} + +static inline void init_MUTEX (struct semaphore *sem) +{ + sema_init(sem, 1); +} + +static inline void init_MUTEX_LOCKED (struct semaphore *sem) +{ + sema_init(sem, 0); +} + +asmlinkage void __down(struct semaphore * sem); +asmlinkage int __down_interruptible(struct semaphore * sem); +asmlinkage int __down_trylock(struct semaphore * sem); +asmlinkage void __up(struct semaphore * sem); + +extern spinlock_t semaphore_wake_lock; + +extern __inline__ void down(struct semaphore * sem) +{ +#if WAITQUEUE_DEBUG + CHECK_MAGIC(sem->__magic); +#endif + + if (atomic_sub_return(1, &sem->count) < 0) + __down(sem); +} + +extern __inline__ int down_interruptible(struct semaphore * sem) +{ + int ret = 0; +#if WAITQUEUE_DEBUG + CHECK_MAGIC(sem->__magic); +#endif + + if (atomic_sub_return(1, &sem->count) < 0) + ret = __down_interruptible(sem); + return ret; +} + +extern __inline__ int down_trylock(struct semaphore * sem) +{ + int ret = 0; +#if WAITQUEUE_DEBUG + CHECK_MAGIC(sem->__magic); +#endif + + if (atomic_sub_return(1, &sem->count) < 0) + ret = __down_trylock(sem); + return ret; +} + +/* + * Note! This is subtle. We jump to wake people up only if + * the semaphore was negative (== somebody was waiting on it). + */ +extern __inline__ void up(struct semaphore * sem) +{ +#if WAITQUEUE_DEBUG + CHECK_MAGIC(sem->__magic); +#endif + if (atomic_add_return(1, &sem->count) <= 0) + __up(sem); +} + +#endif /* _XTENSA_SEMAPHORE_H */ diff --git a/include/asm-xtensa/sembuf.h b/include/asm-xtensa/sembuf.h new file mode 100644 index 000000000000..2d26c47666fe --- /dev/null +++ b/include/asm-xtensa/sembuf.h @@ -0,0 +1,44 @@ +/* + * include/asm-xtensa/sembuf.h + * + * The semid64_ds structure for Xtensa architecture. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + * + */ + +#ifndef _XTENSA_SEMBUF_H +#define _XTENSA_SEMBUF_H + +#include + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ +#if XCHAL_HAVE_LE + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; +#else + unsigned long __unused1; + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused2; + __kernel_time_t sem_ctime; /* last change time */ +#endif + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* __ASM_XTENSA_SEMBUF_H */ diff --git a/include/asm-xtensa/serial.h b/include/asm-xtensa/serial.h new file mode 100644 index 000000000000..ec04114fcf0b --- /dev/null +++ b/include/asm-xtensa/serial.h @@ -0,0 +1,18 @@ +/* + * include/asm-xtensa/serial.h + * + * Configuration details for 8250, 16450, 16550, etc. serial ports + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SERIAL_H +#define _XTENSA_SERIAL_H + +#include + +#endif /* _XTENSA_SERIAL_H */ diff --git a/include/asm-xtensa/setup.h b/include/asm-xtensa/setup.h new file mode 100644 index 000000000000..e3636520d8cc --- /dev/null +++ b/include/asm-xtensa/setup.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/setup.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SETUP_H +#define _XTENSA_SETUP_H + +#define COMMAND_LINE_SIZE 256 + +#endif diff --git a/include/asm-xtensa/shmbuf.h b/include/asm-xtensa/shmbuf.h new file mode 100644 index 000000000000..a30b81a4b933 --- /dev/null +++ b/include/asm-xtensa/shmbuf.h @@ -0,0 +1,50 @@ +/* + * include/asm-xtensa/shmbuf.h + * + * The shmid64_ds structure for Xtensa architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SHMBUF_H +#define _XTENSA_SHMBUF_H + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _XTENSA_SHMBUF_H */ diff --git a/include/asm-xtensa/shmparam.h b/include/asm-xtensa/shmparam.h new file mode 100644 index 000000000000..d3b65bfa71c3 --- /dev/null +++ b/include/asm-xtensa/shmparam.h @@ -0,0 +1,23 @@ +/* + * include/asm-xtensa/shmparam.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef _XTENSA_SHMPARAM_H +#define _XTENSA_SHMPARAM_H + +#include + +/* + * Xtensa can have variable size caches, and if + * the size of single way is larger than the page size, + * then we have to start worrying about cache aliasing + * problems. + */ + +#define SHMLBA ((PAGE_SIZE > DCACHE_WAY_SIZE)? PAGE_SIZE : DCACHE_WAY_SIZE) + +#endif /* _XTENSA_SHMPARAM_H */ diff --git a/include/asm-xtensa/sigcontext.h b/include/asm-xtensa/sigcontext.h new file mode 100644 index 000000000000..a75177291418 --- /dev/null +++ b/include/asm-xtensa/sigcontext.h @@ -0,0 +1,44 @@ +/* + * include/asm-xtensa/sigcontext.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2003 Tensilica Inc. + */ + +#ifndef _XTENSA_SIGCONTEXT_H +#define _XTENSA_SIGCONTEXT_H + +#define _ASMLANGUAGE +#include +#include + + +struct _cpstate { + unsigned char _cpstate[XTENSA_CP_EXTRA_SIZE]; +} __attribute__ ((aligned (XTENSA_CP_EXTRA_ALIGN))); + + +struct sigcontext { + unsigned long oldmask; + + /* CPU registers */ + unsigned long sc_pc; + unsigned long sc_ps; + unsigned long sc_wmask; + unsigned long sc_windowbase; + unsigned long sc_windowstart; + unsigned long sc_lbeg; + unsigned long sc_lend; + unsigned long sc_lcount; + unsigned long sc_sar; + unsigned long sc_depc; + unsigned long sc_dareg0; + unsigned long sc_treg[4]; + unsigned long sc_areg[XCHAL_NUM_AREGS]; + struct _cpstate *sc_cpstate; +}; + +#endif /* __ASM_XTENSA_SIGCONTEXT_H */ diff --git a/include/asm-xtensa/siginfo.h b/include/asm-xtensa/siginfo.h new file mode 100644 index 000000000000..44f0ae77b539 --- /dev/null +++ b/include/asm-xtensa/siginfo.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/processor.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SIGINFO_H +#define _XTENSA_SIGINFO_H + +#include + +#endif /* _XTENSA_SIGINFO_H */ diff --git a/include/asm-xtensa/signal.h b/include/asm-xtensa/signal.h new file mode 100644 index 000000000000..5d6fc9cdf58d --- /dev/null +++ b/include/asm-xtensa/signal.h @@ -0,0 +1,187 @@ +/* + * include/asm-xtensa/signal.h + * + * Swiped from SH. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SIGNAL_H +#define _XTENSA_SIGNAL_H + + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +#ifndef __ASSEMBLY__ + +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; +typedef unsigned long old_sigset_t; /* at least 32 bits */ +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#endif + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* #define SIGLOST 29 */ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX (_NSIG-1) + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND +#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */ + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#ifndef __ASSEMBLY__ +#ifdef __KERNEL__ + +/* + * These values of sa_flags are used only by the kernel as part of the + * irq handling routines. + * + * SA_INTERRUPT is also used by the irq handling routines. + * SA_SHIRQ is for shared interrupt support on PCI and EISA. + */ +#define SA_PROBE SA_ONESHOT +#define SA_SAMPLE_RANDOM SA_RESTART +#define SA_SHIRQ 0x04000000 +#endif + +#define SIG_BLOCK 0 /* for blocking signals */ +#define SIG_UNBLOCK 1 /* for unblocking signals */ +#define SIG_SETMASK 2 /* for setting the signal mask */ + +/* Type of a signal handler. */ +typedef void (*__sighandler_t)(int); + +#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ +#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ +#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer)(void); + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; + +#else + +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +#include +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ +#endif /* __ASSEMBLY__ */ +#endif /* _XTENSA_SIGNAL_H */ diff --git a/include/asm-xtensa/smp.h b/include/asm-xtensa/smp.h new file mode 100644 index 000000000000..83c569e3bdbd --- /dev/null +++ b/include/asm-xtensa/smp.h @@ -0,0 +1,27 @@ +/* + * include/asm-xtensa/smp.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SMP_H +#define _XTENSA_SMP_H + +extern struct xtensa_cpuinfo boot_cpu_data; + +#define cpu_data (&boot_cpu_data) +#define current_cpu_data boot_cpu_data + +struct xtensa_cpuinfo { + unsigned long *pgd_cache; + unsigned long *pte_cache; + unsigned long pgtable_cache_sz; +}; + +#define cpu_logical_map(cpu) (cpu) + +#endif /* _XTENSA_SMP_H */ diff --git a/include/asm-xtensa/socket.h b/include/asm-xtensa/socket.h new file mode 100644 index 000000000000..daccd05a14cd --- /dev/null +++ b/include/asm-xtensa/socket.h @@ -0,0 +1,61 @@ +/* + * include/asm-xtensa/socket.h + * + * Copied from i386. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _XTENSA_SOCKET_H +#define _XTENSA_SOCKET_H + +#include + +/* For setsockoptions(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ + +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ + +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 +#define SO_PEERSEC 31 + +#endif /* _XTENSA_SOCKET_H */ diff --git a/include/asm-xtensa/sockios.h b/include/asm-xtensa/sockios.h new file mode 100644 index 000000000000..20d2ba10ecd1 --- /dev/null +++ b/include/asm-xtensa/sockios.h @@ -0,0 +1,30 @@ +/* + * include/asm-xtensa/sockios.h + * + * Socket-level I/O control calls. Copied from MIPS. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 by Ralf Baechle + * Copyright (C) 2001 Tensilica Inc. + */ + +#ifndef _XTENSA_SOCKIOS_H +#define _XTENSA_SOCKIOS_H + +#include + +/* Socket-level I/O control calls. */ + +#define FIOGETOWN _IOR('f', 123, int) +#define FIOSETOWN _IOW('f', 124, int) + +#define SIOCATMARK _IOR('s', 7, int) +#define SIOCSPGRP _IOW('s', 8, pid_t) +#define SIOCGPGRP _IOR('s', 9, pid_t) + +#define SIOCGSTAMP 0x8906 /* Get stamp - linux-specific */ + +#endif /* _XTENSA_SOCKIOS_H */ diff --git a/include/asm-xtensa/spinlock.h b/include/asm-xtensa/spinlock.h new file mode 100644 index 000000000000..8ff23649581b --- /dev/null +++ b/include/asm-xtensa/spinlock.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/spinlock.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SPINLOCK_H +#define _XTENSA_SPINLOCK_H + +#include + +#endif /* _XTENSA_SPINLOCK_H */ diff --git a/include/asm-xtensa/stat.h b/include/asm-xtensa/stat.h new file mode 100644 index 000000000000..2f4662ff6c3a --- /dev/null +++ b/include/asm-xtensa/stat.h @@ -0,0 +1,105 @@ +/* + * include/asm-xtensa/stat.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_STAT_H +#define _XTENSA_STAT_H + +#include + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +#define STAT_HAVE_NSEC 1 + +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc-2.2.3. */ + +struct stat64 { +#ifdef __XTENSA_EL__ + unsigned short st_dev; /* Device */ + unsigned char __pad0[10]; +#else + unsigned char __pad0[6]; + unsigned short st_dev; + unsigned char __pad1[2]; +#endif + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; /* 32bit file serial number. */ + + unsigned int st_mode; /* File mode. */ + unsigned int st_nlink; /* Link count. */ + unsigned int st_uid; /* User ID of the file's owner. */ + unsigned int st_gid; /* Group ID of the file's group. */ + +#ifdef __XTENSA_EL__ + unsigned short st_rdev; /* Device number, if device. */ + unsigned char __pad3[10]; +#else + unsigned char __pad2[6]; + unsigned short st_rdev; + unsigned char __pad3[2]; +#endif + + long long int st_size; /* Size of file, in bytes. */ + long int st_blksize; /* Optimal block size for I/O. */ + +#ifdef __XTENSA_EL__ + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long __pad4; +#else + unsigned long __pad4; + unsigned long st_blocks; +#endif + + unsigned long __pad5; + long int st_atime; /* Time of last access. */ + unsigned long st_atime_nsec; + long int st_mtime; /* Time of last modification. */ + unsigned long st_mtime_nsec; + long int st_ctime; /* Time of last status change. */ + unsigned long st_ctime_nsec; + unsigned long long int st_ino; /* File serial number. */ +}; + +#endif /* _XTENSA_STAT_H */ diff --git a/include/asm-xtensa/statfs.h b/include/asm-xtensa/statfs.h new file mode 100644 index 000000000000..9c3d1a213136 --- /dev/null +++ b/include/asm-xtensa/statfs.h @@ -0,0 +1,17 @@ +/* + * include/asm-xtensa/statfs.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_STATFS_H +#define _XTENSA_STATFS_H + +#include + +#endif /* _XTENSA_STATFS_H */ + diff --git a/include/asm-xtensa/string.h b/include/asm-xtensa/string.h new file mode 100644 index 000000000000..3f81b27d9809 --- /dev/null +++ b/include/asm-xtensa/string.h @@ -0,0 +1,124 @@ +/* + * include/asm-xtensa/string.h + * + * These trivial string functions are considered part of the public domain. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +/* We should optimize these. See arch/xtensa/lib/strncpy_user.S */ + +#ifndef _XTENSA_STRING_H +#define _XTENSA_STRING_H + +#define __HAVE_ARCH_STRCPY +extern __inline__ char *strcpy(char *__dest, const char *__src) +{ + register char *__xdest = __dest; + unsigned long __dummy; + + __asm__ __volatile__("1:\n\t" + "l8ui %2, %1, 0\n\t" + "s8i %2, %0, 0\n\t" + "addi %1, %1, 1\n\t" + "addi %0, %0, 1\n\t" + "bnez %2, 1b\n\t" + : "=r" (__dest), "=r" (__src), "=&r" (__dummy) + : "0" (__dest), "1" (__src) + : "memory"); + + return __xdest; +} + +#define __HAVE_ARCH_STRNCPY +extern __inline__ char *strncpy(char *__dest, const char *__src, size_t __n) +{ + register char *__xdest = __dest; + unsigned long __dummy; + + if (__n == 0) + return __xdest; + + __asm__ __volatile__( + "1:\n\t" + "l8ui %2, %1, 0\n\t" + "s8i %2, %0, 0\n\t" + "addi %1, %1, 1\n\t" + "addi %0, %0, 1\n\t" + "beqz %2, 2f\n\t" + "bne %1, %5, 1b\n" + "2:" + : "=r" (__dest), "=r" (__src), "=&r" (__dummy) + : "0" (__dest), "1" (__src), "r" (__src+__n) + : "memory"); + + return __xdest; +} + +#define __HAVE_ARCH_STRCMP +extern __inline__ int strcmp(const char *__cs, const char *__ct) +{ + register int __res; + unsigned long __dummy; + + __asm__ __volatile__( + "1:\n\t" + "l8ui %3, %1, 0\n\t" + "addi %1, %1, 1\n\t" + "l8ui %2, %0, 0\n\t" + "addi %0, %0, 1\n\t" + "beqz %2, 2f\n\t" + "beq %2, %3, 1b\n" + "2:\n\t" + "sub %2, %3, %2" + : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&r" (__dummy) + : "0" (__cs), "1" (__ct)); + + return __res; +} + +#define __HAVE_ARCH_STRNCMP +extern __inline__ int strncmp(const char *__cs, const char *__ct, size_t __n) +{ + register int __res; + unsigned long __dummy; + + __asm__ __volatile__( + "mov %2, %3\n" + "1:\n\t" + "beq %0, %6, 2f\n\t" + "l8ui %3, %1, 0\n\t" + "addi %1, %1, 1\n\t" + "l8ui %2, %0, 0\n\t" + "addi %0, %0, 1\n\t" + "beqz %2, 2f\n\t" + "beqz %3, 2f\n\t" + "beq %2, %3, 1b\n" + "2:\n\t" + "sub %2, %3, %2" + : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&r" (__dummy) + : "0" (__cs), "1" (__ct), "r" (__cs+__n)); + + return __res; +} + +#define __HAVE_ARCH_MEMSET +extern void *memset(void *__s, int __c, size_t __count); + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *__to, __const__ void *__from, size_t __n); + +#define __HAVE_ARCH_MEMMOVE +extern void *memmove(void *__dest, __const__ void *__src, size_t __n); + +/* Don't build bcopy at all ... */ +#define __HAVE_ARCH_BCOPY + +#define __HAVE_ARCH_MEMSCAN +#define memscan memchr + +#endif /* _XTENSA_STRING_H */ diff --git a/include/asm-xtensa/system.h b/include/asm-xtensa/system.h new file mode 100644 index 000000000000..690fe325e671 --- /dev/null +++ b/include/asm-xtensa/system.h @@ -0,0 +1,252 @@ +/* + * include/asm-xtensa/system.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SYSTEM_H +#define _XTENSA_SYSTEM_H + +#include +#include + +#include + +/* interrupt control */ + +#define local_save_flags(x) \ + __asm__ __volatile__ ("rsr %0,"__stringify(PS) : "=a" (x)); +#define local_irq_restore(x) do { \ + __asm__ __volatile__ ("wsr %0, "__stringify(PS)" ; rsync" \ + :: "a" (x) : "memory"); } while(0); +#define local_irq_save(x) do { \ + __asm__ __volatile__ ("rsil %0, "__stringify(LOCKLEVEL) \ + : "=a" (x) :: "memory");} while(0); + +static inline void local_irq_disable(void) +{ + unsigned long flags; + __asm__ __volatile__ ("rsil %0, "__stringify(LOCKLEVEL) + : "=a" (flags) :: "memory"); +} +static inline void local_irq_enable(void) +{ + unsigned long flags; + __asm__ __volatile__ ("rsil %0, 0" : "=a" (flags) :: "memory"); + +} + +static inline int irqs_disabled(void) +{ + unsigned long flags; + local_save_flags(flags); + return flags & 0xf; +} + +#define RSR_CPENABLE(x) do { \ + __asm__ __volatile__("rsr %0," __stringify(CPENABLE) : "=a" (x)); \ + } while(0); +#define WSR_CPENABLE(x) do { \ + __asm__ __volatile__("wsr %0," __stringify(CPENABLE)";rsync" \ + :: "a" (x));} while(0); + +#define clear_cpenable() __clear_cpenable() + +extern __inline__ void __clear_cpenable(void) +{ +#if XCHAL_HAVE_CP + unsigned long i = 0; + WSR_CPENABLE(i); +#endif +} + +extern __inline__ void enable_coprocessor(int i) +{ +#if XCHAL_HAVE_CP + int cp; + RSR_CPENABLE(cp); + cp |= 1 << i; + WSR_CPENABLE(cp); +#endif +} + +extern __inline__ void disable_coprocessor(int i) +{ +#if XCHAL_HAVE_CP + int cp; + RSR_CPENABLE(cp); + cp &= ~(1 << i); + WSR_CPENABLE(cp); +#endif +} + +#define smp_read_barrier_depends() do { } while(0) +#define read_barrier_depends() do { } while(0) + +#define mb() barrier() +#define rmb() mb() +#define wmb() mb() + +#ifdef CONFIG_SMP +#error smp_* not defined +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#endif + +#define set_mb(var, value) do { var = value; mb(); } while (0) +#define set_wmb(var, value) do { var = value; wmb(); } while (0) + +#if !defined (__ASSEMBLY__) + +/* * switch_to(n) should switch tasks to task nr n, first + * checking that n isn't the current task, in which case it does nothing. + */ +extern void *_switch_to(void *last, void *next); + +#endif /* __ASSEMBLY__ */ + +#define prepare_to_switch() do { } while(0) + +#define switch_to(prev,next,last) \ +do { \ + clear_cpenable(); \ + (last) = _switch_to(prev, next); \ +} while(0) + +/* + * cmpxchg + */ + +extern __inline__ unsigned long +__cmpxchg_u32(volatile int *p, int old, int new) +{ + __asm__ __volatile__("rsil a15, "__stringify(LOCKLEVEL)"\n\t" + "l32i %0, %1, 0 \n\t" + "bne %0, %2, 1f \n\t" + "s32i %3, %1, 0 \n\t" + "1: \n\t" + "wsr a15, "__stringify(PS)" \n\t" + "rsync \n\t" + : "=&a" (old) + : "a" (p), "a" (old), "r" (new) + : "a15", "memory"); + return old; +} +/* This function doesn't exist, so you'll get a linker error + * if something tries to do an invalid cmpxchg(). */ + +extern void __cmpxchg_called_with_bad_pointer(void); + +static __inline__ unsigned long +__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) +{ + switch (size) { + case 4: return __cmpxchg_u32(ptr, old, new); + default: __cmpxchg_called_with_bad_pointer(); + return old; + } +} + +#define cmpxchg(ptr,o,n) \ + ({ __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof (*(ptr))); \ + }) + + + + +/* + * xchg_u32 + * + * Note that a15 is used here because the register allocation + * done by the compiler is not guaranteed and a window overflow + * may not occur between the rsil and wsr instructions. By using + * a15 in the rsil, the machine is guaranteed to be in a state + * where no register reference will cause an overflow. + */ + +extern __inline__ unsigned long xchg_u32(volatile int * m, unsigned long val) +{ + unsigned long tmp; + __asm__ __volatile__("rsil a15, "__stringify(LOCKLEVEL)"\n\t" + "l32i %0, %1, 0 \n\t" + "s32i %2, %1, 0 \n\t" + "wsr a15, "__stringify(PS)" \n\t" + "rsync \n\t" + : "=&a" (tmp) + : "a" (m), "a" (val) + : "a15", "memory"); + return tmp; +} + +#define tas(ptr) (xchg((ptr),1)) + +#if ( __XCC__ == 1 ) + +/* xt-xcc processes __inline__ differently than xt-gcc and decides to + * insert an out-of-line copy of function __xchg. This presents the + * unresolved symbol at link time of __xchg_called_with_bad_pointer, + * even though such a function would never be called at run-time. + * xt-gcc always inlines __xchg, and optimizes away the undefined + * bad_pointer function. + */ + +#define xchg(ptr,x) xchg_u32(ptr,x) + +#else /* assume xt-gcc */ + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) + +/* + * This only works if the compiler isn't horribly bad at optimizing. + * gcc-2.5.8 reportedly can't handle this, but I define that one to + * be dead anyway. + */ + +extern void __xchg_called_with_bad_pointer(void); + +static __inline__ unsigned long +__xchg(unsigned long x, volatile void * ptr, int size) +{ + switch (size) { + case 4: + return xchg_u32(ptr, x); + } + __xchg_called_with_bad_pointer(); + return x; +} + +#endif + +extern void set_except_vector(int n, void *addr); + +static inline void spill_registers(void) +{ + unsigned int a0, ps; + + __asm__ __volatile__ ( + "movi a14," __stringify (PS_EXCM_MASK) " | 1\n\t" + "mov a12, a0\n\t" + "rsr a13," __stringify(SAR) "\n\t" + "xsr a14," __stringify(PS) "\n\t" + "movi a0, _spill_registers\n\t" + "rsync\n\t" + "callx0 a0\n\t" + "mov a0, a12\n\t" + "wsr a13," __stringify(SAR) "\n\t" + "wsr a14," __stringify(PS) "\n\t" + :: "a" (&a0), "a" (&ps) + : "a2", "a3", "a12", "a13", "a14", "a15", "memory"); +} + +#define arch_align_stack(x) (x) + +#endif /* _XTENSA_SYSTEM_H */ diff --git a/include/asm-xtensa/termbits.h b/include/asm-xtensa/termbits.h new file mode 100644 index 000000000000..c780593ff5f9 --- /dev/null +++ b/include/asm-xtensa/termbits.h @@ -0,0 +1,194 @@ +/* + * include/asm-xtensa/termbits.h + * + * Copied from SH. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_TERMBITS_H +#define _XTENSA_TERMBITS_H + + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +/* c_cc characters */ + +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ + +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ + +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ + +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate (not used) */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +/* c_lflag bits */ + +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ + +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ + +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ + +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* _XTENSA_TERMBITS_H */ diff --git a/include/asm-xtensa/termios.h b/include/asm-xtensa/termios.h new file mode 100644 index 000000000000..83c6aed1d115 --- /dev/null +++ b/include/asm-xtensa/termios.h @@ -0,0 +1,122 @@ +/* + * include/asm-xtensa/termios.h + * + * Copied from SH. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_TERMIOS_H +#define _XTENSA_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* Modem lines */ + +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +/* Line disciplines */ + +#define N_TTY 0 +#define N_SLIP 1 +#define N_MOUSE 2 +#define N_PPP 3 +#define N_STRIP 4 +#define N_AX25 5 +#define N_X25 6 /* X.25 async */ +#define N_6PACK 7 +#define N_MASC 8 /* Reserved for Mobitex module */ +#define N_R3964 9 /* Reserved for Simatic R3964 module */ +#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */ +#define N_IRDA 11 /* Linux IR - http://irda.sourceforge.net/ */ +#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards about SMS messages */ +#define N_HDLC 13 /* synchronous HDLC */ +#define N_SYNC_PPP 14 +#define N_HCI 15 /* Bluetooth HCI UART */ + +#ifdef __KERNEL__ + +/* intr=^C quit=^\ erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ + +#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ + unsigned short __tmp; \ + get_user(__tmp,&(termio)->x); \ + *(unsigned short *) &(termios)->x = __tmp; \ +} + +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ + +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* _XTENSA_TERMIOS_H */ diff --git a/include/asm-xtensa/thread_info.h b/include/asm-xtensa/thread_info.h new file mode 100644 index 000000000000..af208d41fd82 --- /dev/null +++ b/include/asm-xtensa/thread_info.h @@ -0,0 +1,146 @@ +/* + * include/asm-xtensa/thread_info.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_THREAD_INFO_H +#define _XTENSA_THREAD_INFO_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +# include +#endif + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + * - if the contents of this structure are changed, the assembly constants + * must also be changed + */ + +#ifndef __ASSEMBLY__ + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + unsigned long status; /* thread-synchronous flags */ + __u32 cpu; /* current CPU */ + __s32 preempt_count; /* 0 => preemptable,< 0 => BUG*/ + + mm_segment_t addr_limit; /* thread address space */ + struct restart_block restart_block; + + +}; + +#else /* !__ASSEMBLY__ */ + +/* offsets into the thread_info struct for assembly code access */ +#define TI_TASK 0x00000000 +#define TI_EXEC_DOMAIN 0x00000004 +#define TI_FLAGS 0x00000008 +#define TI_STATUS 0x0000000C +#define TI_CPU 0x00000010 +#define TI_PRE_COUNT 0x00000014 +#define TI_ADDR_LIMIT 0x00000018 +#define TI_RESTART_BLOCK 0x000001C + +#endif + +#define PREEMPT_ACTIVE 0x10000000 + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ + +#ifndef __ASSEMBLY__ + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + __asm__("extui %0,a1,0,13\n\t" + "xor %0, a1, %0" : "=&r" (ti) : ); + return ti; +} + +/* thread information allocation */ +#define alloc_thread_info(tsk) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1)) +#define free_thread_info(ti) free_pages((unsigned long) (ti), 1) +#define get_thread_info(ti) get_task_struct((ti)->task) +#define put_thread_info(ti) put_task_struct((ti)->task) + +#else /* !__ASSEMBLY__ */ + +/* how to get the thread information struct from ASM */ +#define GET_THREAD_INFO(reg,sp) \ + extui reg, sp, 0, 13; \ + xor reg, sp, reg +#endif + + +/* + * thread information flags + * - these are process state flags that various assembly files may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */ +#define TIF_IRET 5 /* return with iret */ +#define TIF_MEMDIE 6 +#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ + +#define _TIF_SYSCALL_TRACE (1< +#include + +#if XCHAL_INT_LEVEL(XCHAL_TIMER0_INTERRUPT) == 1 +# define LINUX_TIMER 0 +#elif XCHAL_INT_LEVEL(XCHAL_TIMER1_INTERRUPT) == 1 +# define LINUX_TIMER 1 +#elif XCHAL_INT_LEVEL(XCHAL_TIMER2_INTERRUPT) == 1 +# define LINUX_TIMER 2 +#else +# error "Bad timer number for Linux configurations!" +#endif + +#define LINUX_TIMER_INT XCHAL_TIMER_INTERRUPT(LINUX_TIMER) +#define LINUX_TIMER_MASK (1L << LINUX_TIMER_INT) + +#define CLOCK_TICK_RATE 1193180 /* (everyone is using this value) */ +#define CLOCK_TICK_FACTOR 20 /* Factor of both 10^6 and CLOCK_TICK_RATE */ +#define FINETUNE ((((((long)LATCH * HZ - CLOCK_TICK_RATE) << SHIFT_HZ) * \ + (1000000/CLOCK_TICK_FACTOR) / (CLOCK_TICK_RATE/CLOCK_TICK_FACTOR)) \ + << (SHIFT_SCALE-SHIFT_HZ)) / HZ) + +#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT +extern unsigned long ccount_per_jiffy; +extern unsigned long ccount_nsec; +#define CCOUNT_PER_JIFFY ccount_per_jiffy +#define CCOUNT_NSEC ccount_nsec +#else +#define CCOUNT_PER_JIFFY (CONFIG_XTENSA_CPU_CLOCK*(1000000UL/HZ)) +#define CCOUNT_NSEC (1000000000UL / CONFIG_XTENSA_CPU_CLOCK) +#endif + + +typedef unsigned long long cycles_t; + +/* + * Only used for SMP. + */ + +extern cycles_t cacheflush_time; + +#define get_cycles() (0) + + +/* + * Register access. + */ + +#define WSR_CCOUNT(r) __asm__("wsr %0,"__stringify(CCOUNT) :: "a" (r)) +#define RSR_CCOUNT(r) __asm__("rsr %0,"__stringify(CCOUNT) : "=a" (r)) +#define WSR_CCOMPARE(x,r) __asm__("wsr %0,"__stringify(CCOMPARE_0)"+"__stringify(x) :: "a"(r)) +#define RSR_CCOMPARE(x,r) __asm__("rsr %0,"__stringify(CCOMPARE_0)"+"__stringify(x) : "=a"(r)) + +static inline unsigned long get_ccount (void) +{ + unsigned long ccount; + RSR_CCOUNT(ccount); + return ccount; +} + +static inline void set_ccount (unsigned long ccount) +{ + WSR_CCOUNT(ccount); +} + +static inline unsigned long get_linux_timer (void) +{ + unsigned ccompare; + RSR_CCOMPARE(LINUX_TIMER, ccompare); + return ccompare; +} + +static inline void set_linux_timer (unsigned long ccompare) +{ + WSR_CCOMPARE(LINUX_TIMER, ccompare); +} + +#endif /* __KERNEL__ */ +#endif /* _XTENSA_TIMEX_H */ diff --git a/include/asm-xtensa/tlb.h b/include/asm-xtensa/tlb.h new file mode 100644 index 000000000000..4562b2dcfbc0 --- /dev/null +++ b/include/asm-xtensa/tlb.h @@ -0,0 +1,25 @@ +/* + * include/asm-xtensa/tlb.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_TLB_H +#define _XTENSA_TLB_H + +#define tlb_start_vma(tlb,vma) do { } while (0) +#define tlb_end_vma(tlb,vma) do { } while (0) +#define __tlb_remove_tlb_entry(tlb,pte,addr) do { } while (0) + +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#include +#include + +#define __pte_free_tlb(tlb,pte) pte_free(pte) + +#endif /* _XTENSA_TLB_H */ diff --git a/include/asm-xtensa/tlbflush.h b/include/asm-xtensa/tlbflush.h new file mode 100644 index 000000000000..23bfe9db45f5 --- /dev/null +++ b/include/asm-xtensa/tlbflush.h @@ -0,0 +1,200 @@ +/* + * include/asm-xtensa/tlbflush.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_TLBFLUSH_H +#define _XTENSA_TLBFLUSH_H + +#define DEBUG_TLB + +#ifdef __KERNEL__ + +#include +#include + +/* TLB flushing: + * + * - flush_tlb_all() flushes all processes TLB entries + * - flush_tlb_mm(mm) flushes the specified mm context TLB entries + * - flush_tlb_page(mm, vmaddr) flushes a single page + * - flush_tlb_range(mm, start, end) flushes a range of pages + */ + +extern void flush_tlb_all(void); +extern void flush_tlb_mm(struct mm_struct*); +extern void flush_tlb_page(struct vm_area_struct*,unsigned long); +extern void flush_tlb_range(struct vm_area_struct*,unsigned long,unsigned long); + +#define flush_tlb_kernel_range(start,end) flush_tlb_all() + + +/* This is calld in munmap when we have freed up some page-table pages. + * We don't need to do anything here, there's nothing special about our + * page-table pages. + */ + +extern inline void flush_tlb_pgtables(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ +} + +/* TLB operations. */ + +#define ITLB_WAYS_LOG2 XCHAL_ITLB_WAY_BITS +#define DTLB_WAYS_LOG2 XCHAL_DTLB_WAY_BITS +#define ITLB_PROBE_SUCCESS (1 << ITLB_WAYS_LOG2) +#define DTLB_PROBE_SUCCESS (1 << DTLB_WAYS_LOG2) + +extern inline unsigned long itlb_probe(unsigned long addr) +{ + unsigned long tmp; + __asm__ __volatile__("pitlb %0, %1\n\t" : "=a" (tmp) : "a" (addr)); + return tmp; +} + +extern inline unsigned long dtlb_probe(unsigned long addr) +{ + unsigned long tmp; + __asm__ __volatile__("pdtlb %0, %1\n\t" : "=a" (tmp) : "a" (addr)); + return tmp; +} + +extern inline void invalidate_itlb_entry (unsigned long probe) +{ + __asm__ __volatile__("iitlb %0; isync\n\t" : : "a" (probe)); +} + +extern inline void invalidate_dtlb_entry (unsigned long probe) +{ + __asm__ __volatile__("idtlb %0; dsync\n\t" : : "a" (probe)); +} + +/* Use the .._no_isync functions with caution. Generally, these are + * handy for bulk invalidates followed by a single 'isync'. The + * caller must follow up with an 'isync', which can be relatively + * expensive on some Xtensa implementations. + */ +extern inline void invalidate_itlb_entry_no_isync (unsigned entry) +{ + /* Caller must follow up with 'isync'. */ + __asm__ __volatile__ ("iitlb %0\n" : : "a" (entry) ); +} + +extern inline void invalidate_dtlb_entry_no_isync (unsigned entry) +{ + /* Caller must follow up with 'isync'. */ + __asm__ __volatile__ ("idtlb %0\n" : : "a" (entry) ); +} + +extern inline void set_itlbcfg_register (unsigned long val) +{ + __asm__ __volatile__("wsr %0, "__stringify(ITLBCFG)"\n\t" "isync\n\t" + : : "a" (val)); +} + +extern inline void set_dtlbcfg_register (unsigned long val) +{ + __asm__ __volatile__("wsr %0, "__stringify(DTLBCFG)"; dsync\n\t" + : : "a" (val)); +} + +extern inline void set_ptevaddr_register (unsigned long val) +{ + __asm__ __volatile__(" wsr %0, "__stringify(PTEVADDR)"; isync\n" + : : "a" (val)); +} + +extern inline unsigned long read_ptevaddr_register (void) +{ + unsigned long tmp; + __asm__ __volatile__("rsr %0, "__stringify(PTEVADDR)"\n\t" : "=a" (tmp)); + return tmp; +} + +extern inline void write_dtlb_entry (pte_t entry, int way) +{ + __asm__ __volatile__("wdtlb %1, %0; dsync\n\t" + : : "r" (way), "r" (entry) ); +} + +extern inline void write_itlb_entry (pte_t entry, int way) +{ + __asm__ __volatile__("witlb %1, %0; isync\n\t" + : : "r" (way), "r" (entry) ); +} + +extern inline void invalidate_page_directory (void) +{ + invalidate_dtlb_entry (DTLB_WAY_PGTABLE); +} + +extern inline void invalidate_itlb_mapping (unsigned address) +{ + unsigned long tlb_entry; + while ((tlb_entry = itlb_probe (address)) & ITLB_PROBE_SUCCESS) + invalidate_itlb_entry (tlb_entry); +} + +extern inline void invalidate_dtlb_mapping (unsigned address) +{ + unsigned long tlb_entry; + while ((tlb_entry = dtlb_probe (address)) & DTLB_PROBE_SUCCESS) + invalidate_dtlb_entry (tlb_entry); +} + +#define check_pgt_cache() do { } while (0) + + +#ifdef DEBUG_TLB + +/* DO NOT USE THESE FUNCTIONS. These instructions aren't part of the Xtensa + * ISA and exist only for test purposes.. + * You may find it helpful for MMU debugging, however. + * + * 'at' is the unmodified input register + * 'as' is the output register, as follows (specific to the Linux config): + * + * as[31..12] contain the virtual address + * as[11..08] are meaningless + * as[07..00] contain the asid + */ + +extern inline unsigned long read_dtlb_virtual (int way) +{ + unsigned long tmp; + __asm__ __volatile__("rdtlb0 %0, %1\n\t" : "=a" (tmp), "+a" (way)); + return tmp; +} + +extern inline unsigned long read_dtlb_translation (int way) +{ + unsigned long tmp; + __asm__ __volatile__("rdtlb1 %0, %1\n\t" : "=a" (tmp), "+a" (way)); + return tmp; +} + +extern inline unsigned long read_itlb_virtual (int way) +{ + unsigned long tmp; + __asm__ __volatile__("ritlb0 %0, %1\n\t" : "=a" (tmp), "+a" (way)); + return tmp; +} + +extern inline unsigned long read_itlb_translation (int way) +{ + unsigned long tmp; + __asm__ __volatile__("ritlb1 %0, %1\n\t" : "=a" (tmp), "+a" (way)); + return tmp; +} + +#endif /* DEBUG_TLB */ + + +#endif /* __KERNEL__ */ +#endif /* _XTENSA_PGALLOC_H */ diff --git a/include/asm-xtensa/topology.h b/include/asm-xtensa/topology.h new file mode 100644 index 000000000000..7309e38a0ccb --- /dev/null +++ b/include/asm-xtensa/topology.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/topology.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_TOPOLOGY_H +#define _XTENSA_TOPOLOGY_H + +#include + +#endif /* _XTENSA_TOPOLOGY_H */ diff --git a/include/asm-xtensa/types.h b/include/asm-xtensa/types.h new file mode 100644 index 000000000000..ebac00469852 --- /dev/null +++ b/include/asm-xtensa/types.h @@ -0,0 +1,66 @@ +/* + * include/asm-xtensa/types.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_TYPES_H +#define _XTENSA_TYPES_H + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +/* + * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space + */ + +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) +typedef __signed__ long long __s64; +typedef unsigned long long __u64; +#endif + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +typedef __signed__ char s8; +typedef unsigned char u8; + +typedef __signed__ short s16; +typedef unsigned short u16; + +typedef __signed__ int s32; +typedef unsigned int u32; + +typedef __signed__ long long s64; +typedef unsigned long long u64; + + +#define BITS_PER_LONG 32 + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +typedef unsigned int kmem_bufctl_t; + +#endif /* __KERNEL__ */ +#endif + +#endif /* _XTENSA_TYPES_H */ diff --git a/include/asm-xtensa/uaccess.h b/include/asm-xtensa/uaccess.h new file mode 100644 index 000000000000..35576b25c7b2 --- /dev/null +++ b/include/asm-xtensa/uaccess.h @@ -0,0 +1,532 @@ +/* + * include/asm-xtensa/uaccess.h + * + * User space memory access functions + * + * These routines provide basic accessing functions to the user memory + * space for the kernel. This header file provides fuctions such as: + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_UACCESS_H +#define _XTENSA_UACCESS_H + +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#ifdef __ASSEMBLY__ + +#define _ASMLANGUAGE +#include +#include +#include + +/* + * These assembly macros mirror the C macros that follow below. They + * should always have identical functionality. See + * arch/xtensa/kernel/sys.S for usage. + */ + +#define KERNEL_DS 0 +#define USER_DS 1 + +#define get_ds (KERNEL_DS) + +/* + * get_fs reads current->thread.current_ds into a register. + * On Entry: + * anything + * stack + * On Exit: + * contains current->thread.current_ds + */ + .macro get_fs ad, sp + GET_CURRENT(\ad,\sp) + l32i \ad, \ad, THREAD_CURRENT_DS + .endm + +/* + * set_fs sets current->thread.current_ds to some value. + * On Entry: + * anything (temp register) + * value to write + * stack + * On Exit: + * destroyed (actually, current) + * preserved, value to write + */ + .macro set_fs at, av, sp + GET_CURRENT(\at,\sp) + s32i \av, \at, THREAD_CURRENT_DS + .endm + +/* + * kernel_ok determines whether we should bypass addr/size checking. + * See the equivalent C-macro version below for clarity. + * On success, kernel_ok branches to a label indicated by parameter + * . This implies that the macro falls through to the next + * insruction on an error. + * + * Note that while this macro can be used independently, we designed + * in for optimal use in the access_ok macro below (i.e., we fall + * through on error). + * + * On Entry: + * anything (temp register) + * label to branch to on success; implies + * fall-through macro on error + * stack pointer + * On Exit: + * destroyed (actually, current->thread.current_ds) + */ + +#if ((KERNEL_DS != 0) || (USER_DS == 0)) +# error Assembly macro kernel_ok fails +#endif + .macro kernel_ok at, sp, success + get_fs \at, \sp + beqz \at, \success + .endm + +/* + * user_ok determines whether the access to user-space memory is allowed. + * See the equivalent C-macro version below for clarity. + * + * On error, user_ok branches to a label indicated by parameter + * . This implies that the macro falls through to the next + * instruction on success. + * + * Note that while this macro can be used independently, we designed + * in for optimal use in the access_ok macro below (i.e., we fall + * through on success). + * + * On Entry: + * register containing memory address + * register containing memory size + * temp register + * label to branch to on error; implies fall-through + * macro on success + * On Exit: + * preserved + * preserved + * destroyed (actually, (TASK_SIZE + 1 - size)) + */ + .macro user_ok aa, as, at, error + movi \at, (TASK_SIZE+1) + bgeu \as, \at, \error + sub \at, \at, \as + bgeu \aa, \at, \error + .endm + +/* + * access_ok determines whether a memory access is allowed. See the + * equivalent C-macro version below for clarity. + * + * On error, access_ok branches to a label indicated by parameter + * . This implies that the macro falls through to the next + * instruction on success. + * + * Note that we assume success is the common case, and we optimize the + * branch fall-through case on success. + * + * On Entry: + * register containing memory address + * register containing memory size + * temp register + * + * label to branch to on error; implies fall-through + * macro on success + * On Exit: + * preserved + * preserved + * destroyed + */ + .macro access_ok aa, as, at, sp, error + kernel_ok \at, \sp, .Laccess_ok_\@ + user_ok \aa, \as, \at, \error +.Laccess_ok_\@: + .endm + +/* + * verify_area determines whether a memory access is allowed. It's + * mostly an unnecessary wrapper for access_ok, but we provide it as a + * duplicate of the verify_area() C inline function below. See the + * equivalent C version below for clarity. + * + * On error, verify_area branches to a label indicated by parameter + * . This implies that the macro falls through to the next + * instruction on success. + * + * Note that we assume success is the common case, and we optimize the + * branch fall-through case on success. + * + * On Entry: + * register containing memory address + * register containing memory size + * temp register + * label to branch to on error; implies fall-through + * macro on success + * On Exit: + * preserved + * preserved + * destroyed + */ + .macro verify_area aa, as, at, sp, error + access_ok \at, \aa, \as, \sp, \error + .endm + + +#else /* __ASSEMBLY__ not defined */ + +#include +#include + +/* + * The fs value determines whether argument validity checking should + * be performed or not. If get_fs() == USER_DS, checking is + * performed, with get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons (Data Segment Register?), these macros are + * grossly misnamed. + */ + +#define KERNEL_DS ((mm_segment_t) { 0 }) +#define USER_DS ((mm_segment_t) { 1 }) + +#define get_ds() (KERNEL_DS) +#define get_fs() (current->thread.current_ds) +#define set_fs(val) (current->thread.current_ds = (val)) + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS)) +#define __user_ok(addr,size) (((size) <= TASK_SIZE)&&((addr) <= TASK_SIZE-(size))) +#define __access_ok(addr,size) (__kernel_ok || __user_ok((addr),(size))) +#define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size)) + +extern inline int verify_area(int type, const void * addr, unsigned long size) +{ + return access_ok(type,addr,size) ? 0 : -EFAULT; +} + +/* + * These are the main single-value transfer routines. They + * automatically use the right size if we just have the right pointer + * type. + * + * This gets kind of ugly. We want to return _two_ values in + * "get_user()" and yet we don't want to do any pointers, because that + * is too much of a performance impact. Thus we have a few rather ugly + * macros here, and hide all the uglyness from the user. + * + * Careful to not + * (a) re-use the arguments for side effects (sizeof is ok) + * (b) require any knowledge of processes at this stage + */ +#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr))) +#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr))) + +/* + * The "__xxx" versions of the user access functions are versions that + * do not verify the address space, that must have been done previously + * with a separate "access_ok()" call (this is used when we do multiple + * accesses to the same area of user memory). + */ +#define __put_user(x,ptr) __put_user_nocheck((x),(ptr),sizeof(*(ptr))) +#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr))) + + +extern long __put_user_bad(void); + +#define __put_user_nocheck(x,ptr,size) \ +({ \ + long __pu_err; \ + __put_user_size((x),(ptr),(size),__pu_err); \ + __pu_err; \ +}) + +#define __put_user_check(x,ptr,size) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) *__pu_addr = (ptr); \ + if (access_ok(VERIFY_WRITE,__pu_addr,size)) \ + __put_user_size((x),__pu_addr,(size),__pu_err); \ + __pu_err; \ +}) + +#define __put_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: __put_user_asm(x,ptr,retval,1,"s8i"); break; \ + case 2: __put_user_asm(x,ptr,retval,2,"s16i"); break; \ + case 4: __put_user_asm(x,ptr,retval,4,"s32i"); break; \ + case 8: { \ + __typeof__(*ptr) __v64 = x; \ + retval = __copy_to_user(ptr,&__v64,8); \ + break; \ + } \ + default: __put_user_bad(); \ + } \ +} while (0) + + +/* + * Consider a case of a user single load/store would cause both an + * unaligned exception and an MMU-related exception (unaligned + * exceptions happen first): + * + * User code passes a bad variable ptr to a system call. + * Kernel tries to access the variable. + * Unaligned exception occurs. + * Unaligned exception handler tries to make aligned accesses. + * Double exception occurs for MMU-related cause (e.g., page not mapped). + * do_page_fault() thinks the fault address belongs to the kernel, not the + * user, and panics. + * + * The kernel currently prohibits user unaligned accesses. We use the + * __check_align_* macros to check for unaligned addresses before + * accessing user space so we don't crash the kernel. Both + * __put_user_asm and __get_user_asm use these alignment macros, so + * macro-specific labels such as 0f, 1f, %0, %2, and %3 must stay in + * sync. + */ + +#define __check_align_1 "" + +#define __check_align_2 \ + " _bbci.l %2, 0, 1f \n" \ + " movi %0, %3 \n" \ + " _j 2f \n" + +#define __check_align_4 \ + " _bbsi.l %2, 0, 0f \n" \ + " _bbci.l %2, 1, 1f \n" \ + "0: movi %0, %3 \n" \ + " _j 2f \n" + + +/* + * We don't tell gcc that we are accessing memory, but this is OK + * because we do not write to any memory gcc knows about, so there + * are no aliasing issues. + * + * WARNING: If you modify this macro at all, verify that the + * __check_align_* macros still work. + */ +#define __put_user_asm(x, addr, err, align, insn) \ + __asm__ __volatile__( \ + __check_align_##align \ + "1: "insn" %1, %2, 0 \n" \ + "2: \n" \ + " .section .fixup,\"ax\" \n" \ + " .align 4 \n" \ + "4: \n" \ + " .long 2b \n" \ + "5: \n" \ + " l32r %2, 4b \n" \ + " movi %0, %3 \n" \ + " jx %2 \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " .long 1b, 5b \n" \ + " .previous" \ + :"=r" (err) \ + :"r" ((int)(x)), "r" (addr), "i" (-EFAULT), "0" (err)) + +#define __get_user_nocheck(x,ptr,size) \ +({ \ + long __gu_err, __gu_val; \ + __get_user_size(__gu_val,(ptr),(size),__gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __get_user_check(x,ptr,size) \ +({ \ + long __gu_err = -EFAULT, __gu_val = 0; \ + const __typeof__(*(ptr)) *__gu_addr = (ptr); \ + if (access_ok(VERIFY_READ,__gu_addr,size)) \ + __get_user_size(__gu_val,__gu_addr,(size),__gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +extern long __get_user_bad(void); + +#define __get_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: __get_user_asm(x,ptr,retval,1,"l8ui"); break; \ + case 2: __get_user_asm(x,ptr,retval,2,"l16ui"); break; \ + case 4: __get_user_asm(x,ptr,retval,4,"l32i"); break; \ + case 8: retval = __copy_from_user(&x,ptr,8); break; \ + default: (x) = __get_user_bad(); \ + } \ +} while (0) + + +/* + * WARNING: If you modify this macro at all, verify that the + * __check_align_* macros still work. + */ +#define __get_user_asm(x, addr, err, align, insn) \ + __asm__ __volatile__( \ + __check_align_##align \ + "1: "insn" %1, %2, 0 \n" \ + "2: \n" \ + " .section .fixup,\"ax\" \n" \ + " .align 4 \n" \ + "4: \n" \ + " .long 2b \n" \ + "5: \n" \ + " l32r %2, 4b \n" \ + " movi %1, 0 \n" \ + " movi %0, %3 \n" \ + " jx %2 \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " .long 1b, 5b \n" \ + " .previous" \ + :"=r" (err), "=r" (x) \ + :"r" (addr), "i" (-EFAULT), "0" (err)) + + +/* + * Copy to/from user space + */ + +/* + * We use a generic, arbitrary-sized copy subroutine. The Xtensa + * architecture would cause heavy code bloat if we tried to inline + * these functions and provide __constant_copy_* equivalents like the + * i386 versions. __xtensa_copy_user is quite efficient. See the + * .fixup section of __xtensa_copy_user for a discussion on the + * X_zeroing equivalents for Xtensa. + */ + +extern unsigned __xtensa_copy_user(void *to, const void *from, unsigned n); +#define __copy_user(to,from,size) __xtensa_copy_user(to,from,size) + + +static inline unsigned long +__generic_copy_from_user_nocheck(void *to, const void *from, unsigned long n) +{ + return __copy_user(to,from,n); +} + +static inline unsigned long +__generic_copy_to_user_nocheck(void *to, const void *from, unsigned long n) +{ + return __copy_user(to,from,n); +} + +static inline unsigned long +__generic_copy_to_user(void *to, const void *from, unsigned long n) +{ + prefetch(from); + if (access_ok(VERIFY_WRITE, to, n)) + return __copy_user(to,from,n); + return n; +} + +static inline unsigned long +__generic_copy_from_user(void *to, const void *from, unsigned long n) +{ + prefetchw(to); + if (access_ok(VERIFY_READ, from, n)) + return __copy_user(to,from,n); + else + memset(to, 0, n); + return n; +} + +#define copy_to_user(to,from,n) __generic_copy_to_user((to),(from),(n)) +#define copy_from_user(to,from,n) __generic_copy_from_user((to),(from),(n)) +#define __copy_to_user(to,from,n) __generic_copy_to_user_nocheck((to),(from),(n)) +#define __copy_from_user(to,from,n) __generic_copy_from_user_nocheck((to),(from),(n)) +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + + +/* + * We need to return the number of bytes not cleared. Our memset() + * returns zero if a problem occurs while accessing user-space memory. + * In that event, return no memory cleared. Otherwise, zero for + * success. + */ + +extern inline unsigned long +__xtensa_clear_user(void *addr, unsigned long size) +{ + if ( ! memset(addr, 0, size) ) + return size; + return 0; +} + +extern inline unsigned long +clear_user(void *addr, unsigned long size) +{ + if (access_ok(VERIFY_WRITE, addr, size)) + return __xtensa_clear_user(addr, size); + return size ? -EFAULT : 0; +} + +#define __clear_user __xtensa_clear_user + + +extern long __strncpy_user(char *, const char *, long); +#define __strncpy_from_user __strncpy_user + +extern inline long +strncpy_from_user(char *dst, const char *src, long count) +{ + if (access_ok(VERIFY_READ, src, 1)) + return __strncpy_from_user(dst, src, count); + return -EFAULT; +} + + +#define strlen_user(str) strnlen_user((str), TASK_SIZE - 1) + +/* + * Return the size of a string (including the ending 0!) + */ +extern long __strnlen_user(const char *, long); + +extern inline long strnlen_user(const char *str, long len) +{ + unsigned long top = __kernel_ok ? ~0UL : TASK_SIZE - 1; + + if ((unsigned long)str > top) + return 0; + return __strnlen_user(str, len); +} + + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup.unit otherwise. */ + +extern unsigned long search_exception_table(unsigned long addr); +extern void sort_exception_table(void); + +/* Returns the new pc */ +#define fixup_exception(map_reg, fixup_unit, pc) \ +({ \ + fixup_unit; \ +}) + +#endif /* __ASSEMBLY__ */ +#endif /* _XTENSA_UACCESS_H */ diff --git a/include/asm-xtensa/ucontext.h b/include/asm-xtensa/ucontext.h new file mode 100644 index 000000000000..94c94ed3e00a --- /dev/null +++ b/include/asm-xtensa/ucontext.h @@ -0,0 +1,22 @@ +/* + * include/asm-xtensa/ucontext.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_UCONTEXT_H +#define _XTENSA_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* _XTENSA_UCONTEXT_H */ diff --git a/include/asm-xtensa/unaligned.h b/include/asm-xtensa/unaligned.h new file mode 100644 index 000000000000..28220890d0a6 --- /dev/null +++ b/include/asm-xtensa/unaligned.h @@ -0,0 +1,28 @@ +/* + * include/asm-xtensa/unaligned.h + * + * Xtensa doesn't handle unaligned accesses efficiently. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_UNALIGNED_H +#define _XTENSA_UNALIGNED_H + +#include + +/* Use memmove here, so gcc does not insert a __builtin_memcpy. */ + +#define get_unaligned(ptr) \ + ({ __typeof__(*(ptr)) __tmp; memmove(&__tmp, (ptr), sizeof(*(ptr))); __tmp; }) + +#define put_unaligned(val, ptr) \ + ({ __typeof__(*(ptr)) __tmp = (val); \ + memmove((ptr), &__tmp, sizeof(*(ptr))); \ + (void)0; }) + +#endif /* _XTENSA_UNALIGNED_H */ diff --git a/include/asm-xtensa/unistd.h b/include/asm-xtensa/unistd.h new file mode 100644 index 000000000000..64c64dd83ba4 --- /dev/null +++ b/include/asm-xtensa/unistd.h @@ -0,0 +1,537 @@ +/* + * include/asm-xtensa/unistd.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_UNISTD_H +#define _XTENSA_UNISTD_H + +#include + +//#define __NR_setup 0 /* used only by init, to get system going */ +#define __NR_spill 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_oldumount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_vm86 113 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_modify_ldt 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_cacheflush 147 +#define __NR_cachectl 148 +#define __NR_sysxtensa 149 +#define __NR_sysdummy 150 +#define __NR_getsid 151 +#define __NR_fdatasync 152 +#define __NR__sysctl 153 +#define __NR_mlock 154 +#define __NR_munlock 155 +#define __NR_mlockall 156 +#define __NR_munlockall 157 +#define __NR_sched_setparam 158 +#define __NR_sched_getparam 159 +#define __NR_sched_setscheduler 160 +#define __NR_sched_getscheduler 161 +#define __NR_sched_yield 162 +#define __NR_sched_get_priority_max 163 +#define __NR_sched_get_priority_min 164 +#define __NR_sched_rr_get_interval 165 +#define __NR_nanosleep 166 +#define __NR_mremap 167 +#define __NR_accept 168 +#define __NR_bind 169 +#define __NR_connect 170 +#define __NR_getpeername 171 +#define __NR_getsockname 172 +#define __NR_getsockopt 173 +#define __NR_listen 174 +#define __NR_recv 175 +#define __NR_recvfrom 176 +#define __NR_recvmsg 177 +#define __NR_send 178 +#define __NR_sendmsg 179 +#define __NR_sendto 180 +#define __NR_setsockopt 181 +#define __NR_shutdown 182 +#define __NR_socket 183 +#define __NR_socketpair 184 +#define __NR_setresuid 185 +#define __NR_getresuid 186 +#define __NR_query_module 187 +#define __NR_poll 188 +#define __NR_nfsservctl 189 +#define __NR_setresgid 190 +#define __NR_getresgid 191 +#define __NR_prctl 192 +#define __NR_rt_sigreturn 193 +#define __NR_rt_sigaction 194 +#define __NR_rt_sigprocmask 195 +#define __NR_rt_sigpending 196 +#define __NR_rt_sigtimedwait 197 +#define __NR_rt_sigqueueinfo 198 +#define __NR_rt_sigsuspend 199 +#define __NR_pread 200 +#define __NR_pwrite 201 +#define __NR_chown 202 +#define __NR_getcwd 203 +#define __NR_capget 204 +#define __NR_capset 205 +#define __NR_sigaltstack 206 +#define __NR_sendfile 207 +#define __NR_streams1 208 /* some people actually want it */ +#define __NR_streams2 209 /* some people actually want it */ +#define __NR_mmap2 210 +#define __NR_truncate64 211 +#define __NR_ftruncate64 212 +#define __NR_stat64 213 +#define __NR_lstat64 214 +#define __NR_fstat64 215 +#define __NR_pivot_root 216 +#define __NR_mincore 217 +#define __NR_madvise 218 +#define __NR_getdents64 219 +#define __NR_vfork 220 + +/* Keep this last; should always equal the last valid call number. */ +#define __NR_Linux_syscalls 220 + +/* user-visible error numbers are in the range -1 - -125: see + * */ + +#define SYSXTENSA_RESERVED 0 /* don't use this */ +#define SYSXTENSA_ATOMIC_SET 1 /* set variable */ +#define SYSXTENSA_ATOMIC_EXG_ADD 2 /* exchange memory and add */ +#define SYSXTENSA_ATOMIC_ADD 3 /* add to memory */ +#define SYSXTENSA_ATOMIC_CMP_SWP 4 /* compare and swap */ + +#define SYSXTENSA_COUNT 5 /* count of syscall0 functions*/ + +#ifdef __KERNEL__ +#define __syscall_return(type, res) return ((type)(res)) +#else +#define __syscall_return(type, res) \ +do { \ + if ((unsigned long)(res) >= (unsigned long)(-125)) { \ + /* Avoid using "res" which is declared to be in register r2; \ + * errno might expand to a function call and clobber it. */ \ + int __err = -(res); \ + errno = __err; \ + res = -1; \ + } \ + return (type) (res); \ +} while (0) +#endif + + +/* Tensilica's xt-xcc compiler is much more agressive at code + * optimization than gcc. Multiple __asm__ statements are + * insufficient for xt-xcc because subsequent optimization passes + * (beyond the front-end that knows of __asm__ statements and other + * such GNU Extensions to C) can modify the register selection for + * containment of C variables. + * + * xt-xcc cannot modify the contents of a single __asm__ statement, so + * we create single-asm versions of the syscall macros that are + * suitable and optimal for both xt-xcc and gcc. + * + * Linux takes system-call arguments in registers. The following + * design is optimized for user-land apps (e.g., glibc) which + * typically have a function wrapper around the "syscall" assembly + * instruction. It satisfies the Xtensa ABI while minizing argument + * shifting. + * + * The Xtensa ABI and software conventions require the system-call + * number in a2. If an argument exists in a2, we move it to the next + * available register. Note that for improved efficiency, we do NOT + * shift all parameters down one register to maintain the original + * order. + * + * At best case (zero arguments), we just write the syscall number to + * a2. At worst case (1 to 6 arguments), we move the argument in a2 + * to the next available register, then write the syscall number to + * a2. + * + * For clarity, the following truth table enumerates all possibilities. + * + * arguments syscall number arg0, arg1, arg2, arg3, arg4, arg5 + * --------- -------------- ---------------------------------- + * 0 a2 + * 1 a2 a3 + * 2 a2 a4, a3 + * 3 a2 a5, a3, a4 + * 4 a2 a6, a3, a4, a5 + * 5 a2 a7, a3, a4, a5, a6 + * 6 a2 a8, a3, a4, a5, a6, a7 + */ + +#define _syscall0(type,name) \ +type name(void) \ +{ \ +long __res; \ +__asm__ __volatile__ ( \ + " movi a2, %1 \n" \ + " syscall \n" \ + " mov %0, a2 \n" \ + : "=a" (__res) \ + : "i" (__NR_##name) \ + : "a2" \ + ); \ +__syscall_return(type,__res); \ +} + +#define _syscall1(type,name,type0,arg0) \ +type name(type0 arg0) \ +{ \ +long __res; \ +__asm__ __volatile__ ( \ + " mov a3, %2 \n" \ + " movi a2, %1 \n" \ + " syscall \n" \ + " mov %0, a2 \n" \ + : "=a" (__res) \ + : "i" (__NR_##name), "a" (arg0) \ + : "a2", "a3" \ + ); \ +__syscall_return(type,__res); \ +} + +#define _syscall2(type,name,type0,arg0,type1,arg1) \ +type name(type0 arg0,type1 arg1) \ +{ \ +long __res; \ +__asm__ __volatile__ ( \ + " mov a4, %2 \n" \ + " mov a3, %3 \n" \ + " movi a2, %1 \n" \ + " syscall \n" \ + " mov %0, a2 \n" \ + : "=a" (__res) \ + : "i" (__NR_##name), "a" (arg0), "a" (arg1) \ + : "a2", "a3", "a4" \ + ); \ +__syscall_return(type,__res); \ +} + +#define _syscall3(type,name,type0,arg0,type1,arg1,type2,arg2) \ +type name(type0 arg0,type1 arg1,type2 arg2) \ +{ \ +long __res; \ +__asm__ __volatile__ ( \ + " mov a5, %2 \n" \ + " mov a4, %4 \n" \ + " mov a3, %3 \n" \ + " movi a2, %1 \n" \ + " syscall \n" \ + " mov %0, a2 \n" \ + : "=a" (__res) \ + : "i" (__NR_##name), "a" (arg0), "a" (arg1), "a" (arg2) \ + : "a2", "a3", "a4", "a5" \ + ); \ +__syscall_return(type,__res); \ +} + +#define _syscall4(type,name,type0,arg0,type1,arg1,type2,arg2,type3,arg3) \ +type name(type0 arg0,type1 arg1,type2 arg2,type3 arg3) \ +{ \ +long __res; \ +__asm__ __volatile__ ( \ + " mov a6, %2 \n" \ + " mov a5, %5 \n" \ + " mov a4, %4 \n" \ + " mov a3, %3 \n" \ + " movi a2, %1 \n" \ + " syscall \n" \ + " mov %0, a2 \n" \ + : "=a" (__res) \ + : "i" (__NR_##name), "a" (arg0), "a" (arg1), "a" (arg2), "a" (arg3) \ + : "a2", "a3", "a4", "a5", "a6" \ + ); \ +__syscall_return(type,__res); \ +} + +/* Note that we save and restore the a7 frame pointer. + * Including a7 in the clobber list doesn't do what you'd expect. + */ +#define _syscall5(type,name,type0,arg0,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \ +type name(type0 arg0,type1 arg1,type2 arg2,type3 arg3,type4 arg4) \ +{ \ +long __res; \ +__asm__ __volatile__ ( \ + " mov a9, a7 \n" \ + " mov a7, %2 \n" \ + " mov a6, %6 \n" \ + " mov a5, %5 \n" \ + " mov a4, %4 \n" \ + " mov a3, %3 \n" \ + " movi a2, %1 \n" \ + " syscall \n" \ + " mov a7, a9 \n" \ + " mov %0, a2 \n" \ + : "=a" (__res) \ + : "i" (__NR_##name), "a" (arg0), "a" (arg1), "a" (arg2), \ + "a" (arg3), "a" (arg4) \ + : "a2", "a3", "a4", "a5", "a6", "a9" \ + ); \ +__syscall_return(type,__res); \ +} + +/* Note that we save and restore the a7 frame pointer. + * Including a7 in the clobber list doesn't do what you'd expect. + */ +#define _syscall6(type,name,type0,arg0,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5) \ +type name(type0 arg0,type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \ +{ \ +long __res; \ +__asm__ __volatile__ ( \ + " mov a9, a7 \n" \ + " mov a8, %2 \n" \ + " mov a7, %7 \n" \ + " mov a6, %6 \n" \ + " mov a5, %5 \n" \ + " mov a4, %4 \n" \ + " mov a3, %3 \n" \ + " movi a2, %1 \n" \ + " syscall \n" \ + " mov a7, a9 \n" \ + " mov %0, a2 \n" \ + : "=a" (__res) \ + : "i" (__NR_##name), "a" (arg0), "a" (arg1), "a" (arg2), \ + "a" (arg3), "a" (arg4), "a" (arg5) \ + : "a2", "a3", "a4", "a5", "a6", "a8", "a9" \ + ); \ +__syscall_return(type,__res); \ +} + + +#ifdef __KERNEL_SYSCALLS__ + +#include +#include +#include + +/* + * we need this inline - forking from kernel space will result + * in NO COPY ON WRITE (!!!), until an execve is executed. This + * is no problem, but for the stack. This is handled by not letting + * main() use the stack at all after fork(). Thus, no function + * calls - which means inline code for fork too, as otherwise we + * would use the stack upon exit from 'fork()'. + * + * Actually only pause and fork are needed inline, so that there + * won't be any messing with the stack from main(), but we define + * some others too. + */ + +#define __NR__exit __NR_exit + +static __inline__ _syscall0(int,pause) +//static __inline__ _syscall1(int,setup,int,magic) FIXME +static __inline__ _syscall0(int,sync) +static __inline__ _syscall0(pid_t,setsid) +static __inline__ _syscall3(int,write,int,fd,const char *,buf,off_t,count) +static __inline__ _syscall3(int,read,int,fd,char *,buf,off_t,count) +static __inline__ _syscall3(off_t,lseek,int,fd,off_t,offset,int,count) +static __inline__ _syscall1(int,dup,int,fd) +static __inline__ _syscall3(int,execve,const char*,file,char**,argv,char**,envp) +static __inline__ _syscall3(int,open,const char *,file,int,flag,int,mode) +static __inline__ _syscall1(int,close,int,fd) +static __inline__ _syscall1(int,_exit,int,exitcode) +static __inline__ _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options) +static __inline__ _syscall1(int,delete_module,const char *,name) + +struct stat; +static __inline__ _syscall2(int,fstat,int,fd,struct stat *,buf) +static __inline__ _syscall0(pid_t,getpid) +static __inline__ _syscall2(int,kill,int,pid,int,sig) +static __inline__ _syscall2(int,stat,const char *, path,struct stat *,buf) +static __inline__ _syscall1(int,unlink,char *,pathname) + + + +extern pid_t waitpid(int, int*, int ); +static __inline__ pid_t wait(int * wait_stat) +{ + return waitpid(-1,wait_stat,0); +} +#endif + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall"); + +#ifdef __KERNEL__ +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +#endif + + + +#endif /* _XTENSA_UNISTD_H */ diff --git a/include/asm-xtensa/user.h b/include/asm-xtensa/user.h new file mode 100644 index 000000000000..2c3ed23354a8 --- /dev/null +++ b/include/asm-xtensa/user.h @@ -0,0 +1,20 @@ +/* + * include/asm-xtensa/user.h + * + * Xtensa Processor version. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_USER_H +#define _XTENSA_USER_H + +/* This file usually defines a 'struct user' structure. However, it it only + * used for a.out file, which are not supported on Xtensa. + */ + +#endif /* _XTENSA_USER_H */ diff --git a/include/asm-xtensa/vga.h b/include/asm-xtensa/vga.h new file mode 100644 index 000000000000..23d82f6acb57 --- /dev/null +++ b/include/asm-xtensa/vga.h @@ -0,0 +1,19 @@ +/* + * include/asm-xtensa/vga.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_VGA_H +#define _XTENSA_VGA_H + +#define VGA_MAP_MEM(x) (unsigned long)phys_to_virt(x) + +#define vga_readb(x) (*(x)) +#define vga_writeb(x,y) (*(y) = (x)) + +#endif diff --git a/include/asm-xtensa/xor.h b/include/asm-xtensa/xor.h new file mode 100644 index 000000000000..e7b1f083991d --- /dev/null +++ b/include/asm-xtensa/xor.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/xor.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_XOR_H +#define _XTENSA_XOR_H + +#include + +#endif -- 2.30.2