From 99c81eab785e8f50963c6c730a183a2f95ef4a54 Mon Sep 17 00:00:00 2001 From: "Daniel F. Dickinson" Date: Mon, 17 Dec 2018 00:25:03 -0500 Subject: [PATCH] ar71xx: Fix PowerCloud CR5000 5GHz wifi mac Without this patch PowerCloud CR5000 AR9382 PCIe 5GHz Wifi uses the mac address from eeprom instead the one specified when initializing the PCIe chip. There were two issues: 1) ap94_pci_init on the second PCIe wmac is wrong as there is only one PCIe wmac on this device (the other wmac is the AR1022/AR9342 SoC wmac). 2) Without specifying pdata->use_eeprom there is a failure to load firmware and caldata. Thanks to Christian Lamparter (@chunkeey) for the heavy lifting and help. [0] [0] Signed-off-by: Daniel F. Dickinson --- target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c index 0851899b40b..7c41e7fbc06 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c @@ -136,6 +136,7 @@ static struct mdio_board_info cr5000_mdio0_info[] = { static void __init cr5000_setup(void) { u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + struct ath9k_platform_data *pdata; ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); gpio_request_one(CR5000_GPIO_LED_POWER_ENABLE, @@ -153,10 +154,12 @@ static void __init cr5000_setup(void) cr5000_gpio_keys); ath79_register_usb(); ath79_register_wmac(art + CR5000_WMAC_CALDATA_OFFSET, art + CR5000_WMAC_MAC_OFFSET); - ap94_pci_init(NULL, NULL, NULL, art + CR5000_PCIE_WMAC_OFFSET); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + ap91_pci_init(NULL, art + CR5000_PCIE_WMAC_OFFSET); + pdata = ap9x_pci_get_wmac_data(0); + if (pdata) + pdata->use_eeprom = true; + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); ath79_register_mdio(0, 0x0); ath79_init_mac(ath79_eth0_data.mac_addr, art + CR5000_MAC0_OFFSET, 0); -- 2.30.2