From 9945d05171dd5f71c1d288ed63fa4112024d0a85 Mon Sep 17 00:00:00 2001 From: Weiping Yang Date: Mon, 19 Sep 2022 05:47:40 -0400 Subject: [PATCH] ipq40xx: add support for GL.iNet GL-A1300 Specifications: SOC: Qualcomm IPQ4018 (DAKOTA) ARM Quad-Core RAM: 256 MiB FLASH1: 4 MiB NOR FLASH2: 128 MiB NAND ETH: Qualcomm QCA8075 WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11b/g/n 2x2 WLAN2: Qualcomm Atheros QCA4018 5G 802.11n/ac W2 2x2 USB: 1 x USB 3.0 port Button: 1 x Reset button Switch: 1 x Mode switch LED: 1 x Blue LED + 1 x White LED Install via uboot tftp or uboot web failsafe. By uboot tftp: (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-generic-glinet_gl-a1300-squashfs-nand-factory.ubi (IPQ40xx) # nand erase 0 0x8000000 (IPQ40xx) # nand write 0x84000000 0 $filesize By uboot web failsafe: Push the reset button for 10 seconds util the power led flash faster, then use broswer to access http://192.168.1.1 Afterwards upgrade can use sysupgrade image. Signed-off-by: Weiping Yang --- package/boot/uboot-envtools/files/ipq40xx | 1 + package/firmware/ipq-wifi/Makefile | 2 + .../ipq-wifi/board-glinet_gl-a1300.qca4019 | Bin 0 -> 24308 bytes .../ipq40xx/base-files/etc/board.d/02_network | 1 + .../base-files/lib/upgrade/platform.sh | 1 + .../arm/boot/dts/qcom-ipq4018-gl-a1300.dts | 326 ++++++++++++++++++ target/linux/ipq40xx/image/generic.mk | 14 + 7 files changed, 345 insertions(+) create mode 100644 package/firmware/ipq-wifi/board-glinet_gl-a1300.qca4019 create mode 100644 target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-a1300.dts diff --git a/package/boot/uboot-envtools/files/ipq40xx b/package/boot/uboot-envtools/files/ipq40xx index 823a33ca1b..4ee83bb057 100644 --- a/package/boot/uboot-envtools/files/ipq40xx +++ b/package/boot/uboot-envtools/files/ipq40xx @@ -34,6 +34,7 @@ case "$board" in alfa-network,ap120c-ac|\ devolo,magic-2-wifi-next|\ edgecore,ecw5211|\ +glinet,gl-a1300 |\ glinet,gl-ap1300|\ glinet,gl-b1300|\ glinet,gl-b2200|\ diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index da82e16dde..2096b5f2d6 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -30,6 +30,7 @@ ALLWIFIBOARDS:= \ edgecore_ecw5410 \ edgecore_oap100 \ extreme-networks_ws-ap3915i \ + glinet_gl-a1300 \ glinet_gl-ap1300 \ glinet_gl-s1300 \ linksys_ea8300 \ @@ -105,6 +106,7 @@ $(eval $(call generate-ipq-wifi-package,devolo_magic-2-wifi-next,devolo Magic 2 $(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410)) $(eval $(call generate-ipq-wifi-package,edgecore_oap100,Edgecore OAP100)) $(eval $(call generate-ipq-wifi-package,extreme-networks_ws-ap3915i,Edgecore OAP100)) +$(eval $(call generate-ipq-wifi-package,glinet_gl-a1300,GL.iNet GL-A1300)) $(eval $(call generate-ipq-wifi-package,glinet_gl-ap1300,GL.iNet GL-AP1300)) $(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300)) $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300)) diff --git a/package/firmware/ipq-wifi/board-glinet_gl-a1300.qca4019 b/package/firmware/ipq-wifi/board-glinet_gl-a1300.qca4019 new file mode 100644 index 0000000000000000000000000000000000000000..d8695c983641b25f4e059f65a0ce8b4f2501338c GIT binary patch literal 24308 zcmeHPdr(tX8b1jj>SE!BfCzXAAv|IsK%g2V@)iT6U{R3(i$E30tx+C^hoKAY_@EFG zfm$#`&@w2GrihG-4~WIu+8Jf{kNsn3|7bh==+3OWwxiu?XLc9&+#4|Rl5NJ>y#T5Ng(kjZ2KN>MPL1F#jQ0(sev{Gx)u z0+}@E%_3=Wko4e=5TaIaEWh+1Ugd`bmgkpB^N$|iu}d5j8yXf8B9qaeFAMg=3KkX7 zXuzh15uSnfxupwcc>t`pcY+E4OaNX9BQ(<)m&?Yx0w63b?E7cWXhP;1@Z(?3MU%+} zb}&!5XYALc8wtFC0*_7ArmVV+t;xD0q1=Du0Gy^?YFR2|AnNfM0RP_0syHiM5HjW9KQq3cs8vDv36q(JDTkSOn69k^luXZTd9`*oXwK^2~b!)J>sqYiO1kcd0bE&=0ZJ4apZk+zBIU#;*c zy7f_cXK;;Iv2)(?LWzo&M8M8|-LEz{BF-)wH+gI(FZc!}evO?=U_bDN2+!zrIt|Zl zY~b7SnklirR+|~(_VDf9e3ZlSfq%YiZ*L#AH=CVdyVmHQgbax)7ZHKX%=AV&wVacCSb?ok|)j3)Dv#W83MB0~8npT~d1N4BHedE3Py zXb2)er-M*mF|AI=Bot0ZMX9sSk0p>eqs~vA5f9XZ=OK1zquh;xdR!;b-g zWu>xf__1+`f8>pS_RV5Z+DgP=2`xpFp~L_LIDf;f1t1joL4J-GWCL*^6^acLUN$j8 z0h{gV$u^Q!*gm_J&CY4z0HJ^ezCQ*)t35)C35Pp9YY`v>LfgDG2%x*r*XO{}$%)u> zG#L}sxH1rUG3dag(+|QO2)MgUw_W=Il*>@a*^NMXnKp4IytsA^e_^il_w(ial1aC7 zr`xO3?aqmJ@6F7~J6NP_YHjQ2>b^EGI6N}?$%8K*TYtb{AJ4iw*JWc3h<#8oqmJAO zCH6qYadqS_D6#)3=GT!spw@$E)??+PyKI)h$_mtyJ>%4j+``5SmwGfewV#{QR~9Pz z*)S)Wh$rgF^As~d!ejy>M#Vg_I01xDh9g2$$Pn;Yi#Unr+wt_P`6Y+>H*d{((lM z)37}KH4Rj9=%8oI{P#7MfCg~ zyW~^ZTnfdvpGLZcH(Q$u&K$u~Q3`NGo zZB2(#j_r|b)7(~Gz)D340zPzTQ5+#1#>V}*VB)UklCm83`Po1l)<6nv2R(EKS709X=W7LX>W3+tp>tTt&jf2s~J($ib3f zn3o}zF#;4G?NC=>@uE$H!vi=6Yh(%D>Qf&@-ppGM`3f{|+_7h>M! zmNNF;?~}Gf*ZLfB%dPI;cPXgOz5JE@zQKwQV;TdhHx?;Xsi#7ZyX@bv^Hy&`^Y$9n zTQ1q3-ct0Xsr=t@m1(ZauSC|f%NYmi+tW^mm%B+EL^t{myf1jyOXiZ>qmgzdoMXw6 zyx#sYweS?X#7Q#TS=tz19Vl~6fB127LtxdWLZ|(`gNM5kn>i<#g>8LDFGbh;RWkFh zwoB`x%|D2&xsrTF%% z`?~~7f4%E?_I{8>(+#OZ90!;n3nm8g@7H&8Yw?skt}hABJl%GRGY@D9kgvZbf>W~e z=Sf9qi~!Duw}pK8%(iO}7K0COJl;ar&GGEX_Fs}~kB?39?e$x8^Ux^1{X9UUT$VNh bmh2gu +#include +#include + +/ { + model = "GL.iNet GL-A1300"; + compatible = "glinet,gl-a1300", "qcom,ipq4019"; + + aliases { + led-boot = &led_run; + led-failsafe = &led_run; + led-running = &led_run; + led-upgrade = &led_run; + label-mac-device = &swport4; + }; + + chosen { + bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1"; + }; + + soc { + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + /* select hostmode */ + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + status = "okay"; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + switch { + label = "switch-button"; + gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_run: blue { + label = "blue:status"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + }; + + white { + label = "white:status"; + gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + + usb { + gpio-export,name = "usb_power"; + gpio-export,output = <1>; + gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&prng { + status = "okay"; +}; + +&mdio { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&blsp1_spi1 { + status = "okay"; + + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 5 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + + partition@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + + partition@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + + partition@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + + partition@e0000 { + label = "APPSBLENV"; /* uboot env*/ + reg = <0x000e0000 0x00010000>; + }; + + partition@f0000 { + label = "APPSBL"; /* uboot */ + reg = <0x000f0000 0x00080000>; + read-only; + }; + + partition@170000 { + label = "ART"; + reg = <0x00170000 0x00010000>; + read-only; + compatible = "nvmem-cells"; + + precal_art_1000: precal@1000 { + reg = <0x1000 0x2f20>; + }; + + precal_art_5000: precal@5000 { + reg = <0x5000 0x2f20>; + }; + + macaddr_gmac0: macaddr@0 { + reg = <0x0 0x6>; + }; + + macaddr_gmac1: macaddr@6 { + reg = <0x6 0x6>; + }; + }; + + partition@180000 { + label = "log"; + reg = <0x00180000 0x00020000>; + }; + }; + }; + + spi-nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi"; + reg = <0x00000000 0x08000000>; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + i2c_0_pins: i2c_0_pinmux { + pinmux { + pins = "gpio58", "gpio59"; + function = "blsp_i2c0"; + bias-disable; + }; + }; + + spi0_pins: spi0_pinmux { + mux_spi { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + mux_cs { + function = "gpio"; + pins = "gpio54", "gpio5"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&gmac { + status = "okay"; +}; + +&switch { + status = "okay"; +}; + +&swport3 { + status = "okay"; + + label = "lan2"; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_gmac0>; + mac-address-increment = <2>; +}; + +&swport4 { + status = "okay"; + + label = "lan1"; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_gmac0>; +}; + +&swport5 { + status = "okay"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_gmac1>; +}; + +&wifi0 { + status = "okay"; + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_1000>; + qcom,ath10k-calibration-variant = "GL-A1300"; +}; + +&wifi1 { + status = "okay"; + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_5000>; + qcom,ath10k-calibration-variant = "GL-A1300"; +}; diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index e8e6e29e72..b50d072bec 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -565,6 +565,20 @@ endef # Missing DSA Setup #TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup +define Device/glinet_gl-a1300 + $(call Device/FitImage) + $(call Device/UbiFit) + DEVICE_VENDOR := GL.iNet + DEVICE_MODEL := GL-A1300 + SOC := qcom-ipq4018 + DEVICE_DTS_CONFIG := config@ap.dk01.1-c2 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 131072k + DEVICE_PACKAGE := ipq-wifi-glinet_gl-a1300 +endef +TARGET_DEVICES += glinet_gl-a1300 + define Device/glinet_gl-ap1300 $(call Device/FitImage) $(call Device/UbiFit) -- 2.30.2