From 987a7e31759c0ef3124d521f434bd2d96ed89d6a Mon Sep 17 00:00:00 2001 From: Chuanhong Guo Date: Fri, 29 Dec 2017 12:35:32 +0800 Subject: [PATCH] ramips: fix lenovo newifi-y1 switch and LED config There are 3 ethernet ports on Y1. LAN1 on port1, LAN2 on port0 and WAN on port4. Use a standalone switch configuration to match this and use the switch trigger so that LAN LED could indicate the connetction status for both lan ports correctly. This patch also drop the internet led configuration, because there is a WAN led for port4 and eth0.2 isn't always used as WAN. Signed-off-by: Chuanhong Guo --- target/linux/ramips/base-files/etc/board.d/01_leds | 3 +-- target/linux/ramips/base-files/etc/board.d/02_network | 5 ++++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index e8c29fa037..cc30999e1c 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -351,8 +351,7 @@ y1) set_usb_led "$board:blue:usb" ucidef_set_led_netdev "wifi" "WIFI" "$board:blue:wifi" "wlan1" ucidef_set_led_netdev "wifi5g" "WIFI5G" "$board:blue:wifi5g" "wlan0" - ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0.1" "tx rx" - ucidef_set_led_netdev "wan" "WAN" "$board:blue:internet" "eth0.2" "tx rx" + ucidef_set_led_switch "lan" "LAN" "$board:blue:lan" "switch0" "0x03" ;; y1s) set_usb_led "$board:blue:usb" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 1778dc9329..17d25b1954 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -100,7 +100,6 @@ ramips_setup_interfaces() wl-wn575a3|\ wndr3700v5|\ wt1520|\ - y1|\ youku-yk1|\ zbt-ape522ii|\ zbt-we826|\ @@ -282,6 +281,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "0:wan" "6@eth0" ;; + y1) + ucidef_add_switch "switch0" \ + "0:lan:2" "1:lan:1" "4:wan" "6@eth0" + ;; *) RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"` if [ -n "${RT3X5X}" ]; then -- 2.30.2