From 984e03cdf1431bb593aeaa1b74c445d616f955d3 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 12 Jun 2008 13:13:23 -0500 Subject: [PATCH] NAND: Always skip blocks on read/write/boot. Use of the non-skipping versions was almost always (if not always) an error, and no valid use case has been identified. Signed-off-by: Scott Wood --- common/cmd_nand.c | 27 ++++++++++++++------------- doc/README.nand | 37 ++++++++++++------------------------- 2 files changed, 26 insertions(+), 38 deletions(-) diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 710ba8f946..2c421e948e 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -332,8 +332,8 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return 1; s = strchr(cmd, '.'); - if (s != NULL && - (!strcmp(s, ".jffs2") || !strcmp(s, ".e") || !strcmp(s, ".i"))) { + if (!s || !strcmp(s, ".jffs2") || + !strcmp(s, ".e") || !strcmp(s, ".i")) { if (read) { /* read */ nand_read_options_t opts; @@ -372,10 +372,8 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) else ret = nand->write_oob(nand, off, &ops); } else { - if (read) - ret = nand_read(nand, off, &size, (u_char *)addr); - else - ret = nand_write(nand, off, &size, (u_char *)addr); + printf("Unknown nand command suffix '%s'.\n", s); + return 1; } printf(" %d bytes %s: %s\n", size, @@ -492,10 +490,10 @@ U_BOOT_CMD(nand, 5, 1, do_nand, "nand - NAND sub-system\n", "info - show available NAND devices\n" "nand device [dev] - show or set current device\n" - "nand read[.jffs2] - addr off|partition size\n" - "nand write[.jffs2] - addr off|partition size\n" + "nand read - addr off|partition size\n" + "nand write - addr off|partition size\n" " read/write 'size' bytes starting at offset 'off'\n" - " to/from memory address 'addr'\n" + " to/from memory address 'addr', skipping bad blocks.\n" "nand erase [clean] [off size] - erase 'size' bytes from\n" " offset 'off' (entire device if not specified)\n" "nand bad - show bad blocks\n" @@ -514,15 +512,17 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, char *ep, *s; size_t cnt; image_header_t *hdr; - int jffs2 = 0; #if defined(CONFIG_FIT) const void *fit_hdr = NULL; #endif s = strchr(cmd, '.'); if (s != NULL && - (!strcmp(s, ".jffs2") || !strcmp(s, ".e") || !strcmp(s, ".i"))) - jffs2 = 1; + (strcmp(s, ".jffs2") && !strcmp(s, ".e") && !strcmp(s, ".i"))) { + printf("Unknown nand load suffix '%s'\n", s); + show_boot_progress(-53); + return 1; + } printf("\nLoading from %s, offset 0x%lx\n", nand->name, offset); @@ -559,6 +559,7 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, } show_boot_progress (57); + /* FIXME: skip bad blocks */ r = nand_read(nand, offset, &cnt, (u_char *) addr); if (r) { puts("** Read error\n"); @@ -680,7 +681,7 @@ usage: U_BOOT_CMD(nboot, 4, 1, do_nandboot, "nboot - boot from NAND device\n", - "[.jffs2] [partition] | [[[loadAddr] dev] offset]\n"); + "[partition] | [[[loadAddr] dev] offset]\n"); #endif diff --git a/doc/README.nand b/doc/README.nand index 647a6b8e67..0ad5e18dd3 100644 --- a/doc/README.nand +++ b/doc/README.nand @@ -57,14 +57,9 @@ Commands: Print information about all of the NAND devices found. nand read addr ofs|partition size - Read `size' bytes from `ofs' in NAND flash to `addr'. If a page - cannot be read because it is marked bad or an uncorrectable data - error is found the command stops with an error. - - nand read.jffs2 addr ofs|partition size - Like `read', but the data for blocks that are marked bad is read as - 0xff. This gives a readable JFFS2 image that can be processed by - the JFFS2 commands such as ls and fsload. + Read `size' bytes from `ofs' in NAND flash to `addr'. Blocks that + are marked bad are skipped. If a page cannot be read because an + uncorrectable data error is found, the command stops with an error. nand read.oob addr ofs|partition size Read `size' bytes from the out-of-band data area corresponding to @@ -73,17 +68,15 @@ Commands: for bad blocks or ECC errors. nand write addr ofs|partition size - Write `size' bytes from `addr' to `ofs' in NAND flash. If a page - cannot be written because it is marked bad or the write fails the - command stops with an error. - - nand write.jffs2 addr ofs|partition size - Like `write', but blocks that are marked bad are skipped and the - data is written to the next block instead. This allows writing - a JFFS2 image, as long as the image is short enough to fit even - after skipping the bad blocks. Compact images, such as those - produced by mkfs.jffs2 should work well, but loading an image copied - from another flash is going to be trouble if there are any bad blocks. + Write `size' bytes from `addr' to `ofs' in NAND flash. Blocks that + are marked bad are skipped. If a page cannot be read because an + uncorrectable data error is found, the command stops with an error. + + As JFFS2 skips blocks similarly, this allows writing a JFFS2 image, + as long as the image is short enough to fit even after skipping the + bad blocks. Compact images, such as those produced by mkfs.jffs2 + should work well, but loading an image copied from another flash is + going to be trouble if there are any bad blocks. nand write.oob addr ofs|partition size Write `size' bytes from `addr' to the out-of-band data area @@ -215,12 +208,6 @@ JFFS2 related commands: using both the new code which is able to skip bad blocks "nand erase clean" additionally writes JFFS2-cleanmarkers in the oob. - "nand write.jffs2" - like "nand write" but skip found bad eraseblocks - - "nand read.jffs2" - like "nand read" but skip found bad eraseblocks - Miscellaneous and testing commands: "markbad [offset]" create an artificial bad block (for testing bad block handling) -- 2.30.2