From 97070b32a886d53b7343bcb28ed38d906fa95f50 Mon Sep 17 00:00:00 2001 From: Bill Pemberton Date: Thu, 19 Mar 2009 17:58:25 -0400 Subject: [PATCH] Staging: comedi: comedi: remove C99 comments in skel.c Signed-off-by: Bill Pemberton Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/skel.c | 30 ++++++++++++++------------- 1 file changed, 16 insertions(+), 14 deletions(-) diff --git a/drivers/staging/comedi/drivers/skel.c b/drivers/staging/comedi/drivers/skel.c index b2268aa49bc8..c7700d134cc1 100644 --- a/drivers/staging/comedi/drivers/skel.c +++ b/drivers/staging/comedi/drivers/skel.c @@ -215,7 +215,7 @@ static int skel_attach(struct comedi_device * dev, struct comedi_devconfig * it) * it is, this is the place to do it. Otherwise, dev->board_ptr * should already be initialized. */ - //dev->board_ptr = skel_probe(dev, it); + /* dev->board_ptr = skel_probe(dev, it); */ /* * Initialize dev->board_name. Note that we can use the "thisboard" @@ -238,7 +238,7 @@ static int skel_attach(struct comedi_device * dev, struct comedi_devconfig * it) return -ENOMEM; s = dev->subdevices + 0; - //dev->read_subdev=s; + /* dev->read_subdev=s; */ /* analog input subdevice */ s->type = COMEDI_SUBD_AI; /* we support single-ended (ground) and differential */ @@ -249,8 +249,10 @@ static int skel_attach(struct comedi_device * dev, struct comedi_devconfig * it) s->len_chanlist = 16; /* This is the maximum chanlist length that the board can handle */ s->insn_read = skel_ai_rinsn; -// s->subdev_flags |= SDF_CMD_READ; -// s->do_cmd = skel_ai_cmd; +/* +* s->subdev_flags |= SDF_CMD_READ; +* s->do_cmd = skel_ai_cmd; +*/ s->do_cmdtest = skel_ai_cmdtest; s = dev->subdevices + 1; @@ -311,20 +313,20 @@ static int skel_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s /* a typical programming sequence */ /* write channel to multiplexer */ - //outw(chan,dev->iobase + SKEL_MUX); + /* outw(chan,dev->iobase + SKEL_MUX); */ /* don't wait for mux to settle */ /* convert n samples */ for (n = 0; n < insn->n; n++) { /* trigger conversion */ - //outw(0,dev->iobase + SKEL_CONVERT); + /* outw(0,dev->iobase + SKEL_CONVERT); */ #define TIMEOUT 100 /* wait for conversion to end */ for (i = 0; i < TIMEOUT; i++) { status = 1; - //status = inb(dev->iobase + SKEL_STATUS); + /* status = inb(dev->iobase + SKEL_STATUS); */ if (status) break; } @@ -336,7 +338,7 @@ static int skel_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s } /* read data */ - //d = inw(dev->iobase + SKEL_AI_DATA); + /* d = inw(dev->iobase + SKEL_AI_DATA); */ d = 0; /* mangle the data as necessary */ @@ -529,7 +531,7 @@ static int skel_ao_winsn(struct comedi_device * dev, struct comedi_subdevice * s * very useful, but that's how the interface is defined. */ for (i = 0; i < insn->n; i++) { /* a typical programming sequence */ - //outw(data[i],dev->iobase + SKEL_DA0 + chan); + /* outw(data[i],dev->iobase + SKEL_DA0 + chan); */ devpriv->ao_readback[chan] = data[i]; } @@ -568,15 +570,15 @@ static int skel_dio_insn_bits(struct comedi_device * dev, struct comedi_subdevic s->state &= ~data[0]; s->state |= data[0] & data[1]; /* Write out the new digital output lines */ - //outw(s->state,dev->iobase + SKEL_DIO); + /* outw(s->state,dev->iobase + SKEL_DIO); */ } /* on return, data[1] contains the value of the digital * input and output lines. */ - //data[1]=inw(dev->iobase + SKEL_DIO); + /* data[1]=inw(dev->iobase + SKEL_DIO); */ /* or we could just return the software copy of the output values if * it was a purely digital output subdevice */ - //data[1]=s->state; + /* data[1]=s->state; */ return 2; } @@ -607,7 +609,7 @@ static int skel_dio_insn_config(struct comedi_device * dev, struct comedi_subdev return -EINVAL; break; } - //outw(s->io_bits,dev->iobase + SKEL_DIO_CONFIG); + /* outw(s->io_bits,dev->iobase + SKEL_DIO_CONFIG); */ return insn->n; } @@ -619,4 +621,4 @@ static int skel_dio_insn_config(struct comedi_device * dev, struct comedi_subdev COMEDI_INITCLEANUP(driver_skel); /* If you are writing a PCI driver you should use COMEDI_PCI_INITCLEANUP instead. */ -// COMEDI_PCI_INITCLEANUP(driver_skel, skel_pci_table) +/* COMEDI_PCI_INITCLEANUP(driver_skel, skel_pci_table) */ -- 2.30.2