From 96eb5c6fa8ead2bf749b78dff2f55a340cff020e Mon Sep 17 00:00:00 2001 From: John Crispin Date: Tue, 1 Mar 2016 09:17:06 +0000 Subject: [PATCH] ramips: Added support for ZBT-826 / ZBT-1026 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Support for these MT7620-based routers: https://wiki.openwrt.org/toh/zbt/we-826 Based on Oskari’s patches found here: https://dev.openwrt.org/ticket/19996 Signed-off-by: Jamie Stuart SVN-Revision: 48865 --- .../ramips/base-files/etc/board.d/01_leds | 5 + .../ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/ZBT-WE826.dts | 124 ++++++++++++++++++ target/linux/ramips/image/Makefile | 2 + target/linux/ramips/mt7620/profiles/zbt.mk | 19 +++ 7 files changed, 155 insertions(+) mode change 100755 => 100644 target/linux/ramips/base-files/etc/board.d/01_leds mode change 100755 => 100644 target/linux/ramips/base-files/etc/board.d/02_network mode change 100755 => 100644 target/linux/ramips/base-files/lib/ramips.sh mode change 100755 => 100644 target/linux/ramips/base-files/lib/upgrade/platform.sh create mode 100644 target/linux/ramips/dts/ZBT-WE826.dts create mode 100644 target/linux/ramips/mt7620/profiles/zbt.mk diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds old mode 100755 new mode 100644 index d1b4e159aef..8fd50fedc79 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -268,6 +268,11 @@ zbt-wa05) set_wifi_led "$board:blue:air" set_usb_led "$board:blue:usb" ;; +zbt-we826) + ucidef_set_led_default "power" "power" "$board:green:power" "1" + set_wifi_led "$board:green:wifi" + set_usb_led "$board:green:usb" + ;; zbt-wr8305rt) ucidef_set_led_default "power" "power" "$board:green:sys" "1" set_usb_led "$board:green:usb" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network old mode 100755 new mode 100644 index 0121e51665b..0a680d09755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -209,6 +209,7 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "0:wan" "6@eth0" ;; + zbt-we826|\ zbt-wr8305rt) ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh old mode 100755 new mode 100644 index c6c32fe7dbb..c4eb357818a --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -475,6 +475,9 @@ ramips_board_detect() { *"ZBT-WA05") name="zbt-wa05" ;; + *"ZBT-WE826") + name="zbt-we826" + ;; *"ZBT-WG2626") name="zbt-wg2626" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh old mode 100755 new mode 100644 index 0cae7071055..df1ededd008 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -139,6 +139,7 @@ platform_check_image() { y1|\ y1s|\ zbt-wa05|\ + zbt-we826|\ zbt-wg2626|\ zbt-wr8305rt|\ zte-q7|\ diff --git a/target/linux/ramips/dts/ZBT-WE826.dts b/target/linux/ramips/dts/ZBT-WE826.dts new file mode 100644 index 00000000000..22bef9905c4 --- /dev/null +++ b/target/linux/ramips/dts/ZBT-WE826.dts @@ -0,0 +1,124 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "zbtlink,zbt-we826", "ralink,mt7620a-soc"; + model = "ZBT-WE826"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + gpio0: gpio@600 { + status = "okay"; + }; + + gpio1: gpio@638 { + status = "okay"; + }; + + gpio3: gpio@688 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + en25q128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q128"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; + }; + + sdhci@10130000 { + status = "okay"; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + ralink,port-map = "wllll"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "zbt-we826:green:power"; + gpios = <&gpio1 14 0>; + }; + usb { + label = "zbt-we826:green:usb"; + gpios = <&gpio1 15 0>; + }; + air { + label = "zbt-we826:green:wifi"; + gpios = <&gpio3 0 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 1 1>; + linux,code = <0x198>; + }; + }; + + pcie@10140000 { + status = "okay"; + }; +}; \ No newline at end of file diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 307c3f93e6a..5d90ced2b5e 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -976,6 +976,7 @@ Image/Build/Profile/MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),miwifi Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7) Image/Build/Profile/YOUKU-YK1=$(call BuildFirmware/Default16M/$(1),$(1),youku-yk1,YOUKU-YK1) Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05) +Image/Build/Profile/ZBT-WE826=$(call BuildFirmware/Default16M/$(1),$(1),zbt-we826,ZBT-WE826) Image/Build/Profile/ZBT-WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wr8305rt,ZBT-WR8305RT) Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i) microwrt_mtd_size=16515072 @@ -1018,6 +1019,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/ZTE-Q7,$(1)) $(call Image/Build/Profile/YOUKU-YK1,$(1)) $(call Image/Build/Profile/ZBT-WA05,$(1)) + $(call Image/Build/Profile/ZBT-WE826,$(1)) $(call Image/Build/Profile/ZBT-WR8305RT,$(1)) $(call Image/Build/Profile/ArcherC20i,$(1)) $(call Image/Build/Profile/MicroWRT,$(1)) diff --git a/target/linux/ramips/mt7620/profiles/zbt.mk b/target/linux/ramips/mt7620/profiles/zbt.mk new file mode 100644 index 00000000000..c33048f4abc --- /dev/null +++ b/target/linux/ramips/mt7620/profiles/zbt.mk @@ -0,0 +1,19 @@ +# +# Copyright (C) 2016 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/ZBT-WE826 + NAME:=ZBT-WE826 Device + PACKAGES:=\ + kmod-scsi-core kmod-scsi-generic kmod-mmc kmod-sdhci \ + block-mount kmod-usb-core kmod-usb-dwc2 kmod-usb2 kmod-usb-ohci \ + kmod-mt76 +endef + +define Profile/ZBT-WE826/Description + Support for ZBT WE-826-(B,T) routers +endef +$(eval $(call Profile,ZBT-WE826)) -- 2.30.2