From 96c6608346758ceffebf30d74cab00db58874bb9 Mon Sep 17 00:00:00 2001 From: Tianling Shen Date: Wed, 26 Feb 2025 21:52:53 +0800 Subject: [PATCH] mediatek: add support for CMCC A10 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit This board is also as known as SuperElectron ZN-M5 and ZN-M8. However, for ZN-M5 and ZN-M8, there's another version uses ZX279128 as CPU chip, which is unsupported. You can check it in "高级设置" > "系统日志" > "内核日志" page from webUI. Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 128 MB SPI-NAND RAM: 256MB Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset, WPS Power: DC 12V 1A Stock layout flash instructions: Login into webUI and upload sysupgrade firmware in "系统管理" > "升级固件" page. Remember to unselect "保留配置" ("Keep configurations") first before doing that. OpenWrt U-Boot layout flash instructions: 1. Flash stock layout firmware first. 2. Connect to the device via SSH, and backup everything, especially 'Factory' partition. 3. Unlock MTD partitions: apk update && apk add kmod-mtd-rw insmod mtd-rw i_want_a_brick=1 4. Write new BL2 and FIP: mtd write openwrt-mediatek-filogic-cmcc_a10-ubootmod-preloader.bin BL2 mtd write openwrt-mediatek-filogic-cmcc_a10-ubootmod-bl31-uboot.fip FIP 5. Set static IP on your PC: IP 192.168.1.254/24, GW 192.168.1.1 6. Serve OpenWrt initramfs image using TFTP server. 7. Cut off the power and re-engage, wait for TFTP recovery to complete. 8. After OpenWrt has booted, perform sysupgrade. Signed-off-by: Tianling Shen Link: https://github.com/openwrt/openwrt/pull/18121 Signed-off-by: Hauke Mehrtens --- .../uboot-envtools/files/mediatek_filogic | 1 + package/boot/uboot-mediatek/Makefile | 13 + .../patches/446-add-cmcc_a10.patch | 326 ++++++++++++++++++ .../mediatek/dts/mt7981b-cmcc-a10-stock.dts | 40 +++ .../dts/mt7981b-cmcc-a10-ubootmod.dts | 28 ++ .../linux/mediatek/dts/mt7981b-cmcc-a10.dtsi | 254 ++++++++++++++ .../filogic/base-files/etc/board.d/02_network | 2 + .../base-files/lib/upgrade/platform.sh | 1 + target/linux/mediatek/image/filogic.mk | 55 +++ 9 files changed, 720 insertions(+) create mode 100644 package/boot/uboot-mediatek/patches/446-add-cmcc_a10.patch create mode 100644 target/linux/mediatek/dts/mt7981b-cmcc-a10-stock.dts create mode 100644 target/linux/mediatek/dts/mt7981b-cmcc-a10-ubootmod.dts create mode 100644 target/linux/mediatek/dts/mt7981b-cmcc-a10.dtsi diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic index bf107cc135..8fbd4052b7 100644 --- a/package/boot/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-envtools/files/mediatek_filogic @@ -34,6 +34,7 @@ ubootenv_add_ubi_default() { case "$board" in abt,asr3000|\ +cmcc,a10-ubootmod|\ h3c,magic-nx30-pro|\ jcg,q30-pro|\ mercusys,mr90x-v1-ubi|\ diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile index a62ecb9c97..356b2bb8ea 100644 --- a/package/boot/uboot-mediatek/Makefile +++ b/package/boot/uboot-mediatek/Makefile @@ -231,6 +231,18 @@ define U-Boot/mt7981_abt_asr3000 DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3 endef +define U-Boot/mt7981_cmcc_a10 + NAME:=CMCC A10 + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=cmcc_a10-ubootmod + UBOOT_CONFIG:=mt7981_cmcc_a10 + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=spim-nand + BL2_SOC:=mt7981 + BL2_DDRTYPE:=ddr3 + DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3 +endef + define U-Boot/mt7981_cmcc_rax3000m-emmc NAME:=CMCC RAX3000M BUILD_SUBTARGET:=filogic @@ -832,6 +844,7 @@ UBOOT_TARGETS := \ mt7628_ravpower_rp-wd009 \ mt7629_rfb \ mt7981_abt_asr3000 \ + mt7981_cmcc_a10 \ mt7981_cmcc_rax3000m-emmc \ mt7981_cmcc_rax3000m-nand \ mt7981_gatonetworks_gdsp \ diff --git a/package/boot/uboot-mediatek/patches/446-add-cmcc_a10.patch b/package/boot/uboot-mediatek/patches/446-add-cmcc_a10.patch new file mode 100644 index 0000000000..a4083bf4c7 --- /dev/null +++ b/package/boot/uboot-mediatek/patches/446-add-cmcc_a10.patch @@ -0,0 +1,326 @@ +--- /dev/null ++++ b/configs/mt7981_cmcc_a10_defconfig +@@ -0,0 +1,106 @@ ++CONFIG_ARM=y ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="mt7981-cmcc-a10" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_TARGET_MT7981=y ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_DEBUG_UART=y ++CONFIG_FIT=y ++CONFIG_BOOTDELAY=30 ++CONFIG_AUTOBOOT_KEYED=y ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-cmcc-a10.dtb" ++CONFIG_LOGLEVEL=7 ++CONFIG_PRE_CONSOLE_BUFFER=y ++CONFIG_LOG=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_PROMPT="MT7981> " ++CONFIG_CMD_CPU=y ++CONFIG_CMD_LICENSE=y ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_CMD_STRINGS=y ++CONFIG_CMD_DM=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PART=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_LINK_LOCAL=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_UUID=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_OF_EMBED=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_UBI=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_ENV_UBI_PART="ubi" ++CONFIG_ENV_UBI_VOLUME="ubootenv" ++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2" ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_DEFAULT_ENV_FILE="defenvs/cmcc_a10_env" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_NETCONSOLE=y ++CONFIG_USE_IPADDR=y ++CONFIG_IPADDR="192.168.1.1" ++CONFIG_USE_SERVERIP=y ++CONFIG_SERVERIP="192.168.1.254" ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_CLK=y ++CONFIG_GPIO_HOG=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++# CONFIG_MMC is not set ++CONFIG_MTD=y ++CONFIG_DM_MTD=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_MTD_UBI_FASTMAP=y ++CONFIG_PHY_FIXED=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PHY=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7981=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_RAM=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPIM=y ++CONFIG_ZSTD=y ++CONFIG_HEXDUMP=y +--- /dev/null ++++ b/arch/arm/dts/mt7981-cmcc-a10.dts +@@ -0,0 +1,157 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later ++ ++/dts-v1/; ++#include "mt7981.dtsi" ++#include ++#include ++ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ model = "CMCC A10"; ++ compatible = "mediatek,mt7981", "mediatek,mt7981-rfb"; ++ ++ chosen { ++ stdout-path = &uart0; ++ tick-timer = &timer0; ++ }; ++ ++ memory@40000000 { ++ device_type = "memory"; ++ reg = <0x40000000 0x10000000>; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ ++ button-reset { ++ label = "reset"; ++ linux,code = ; ++ gpios = <&gpio 1 GPIO_ACTIVE_LOW>; ++ }; ++ ++ button-wps { ++ label = "wps"; ++ linux,code = ; ++ gpios = <&gpio 0 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ gpio-leds { ++ compatible = "gpio-leds"; ++ ++ led-0 { ++ label = "blue:status"; ++ gpios = <&gpio 9 GPIO_ACTIVE_LOW>; ++ default-state = "off"; ++ }; ++ ++ running_led: led-1 { ++ label = "green:status"; ++ gpios = <&gpio 10 GPIO_ACTIVE_LOW>; ++ default-state = "off"; ++ }; ++ ++ boot_led: led-2 { ++ label = "red:status"; ++ gpios = <&gpio 11 GPIO_ACTIVE_LOW>; ++ default-state = "on"; ++ }; ++ }; ++}; ++ ++ð { ++ status = "okay"; ++ mediatek,gmac-id = <0>; ++ phy-mode = "2500base-x"; ++ mediatek,switch = "mt7531"; ++ reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>; ++ ++ fixed-link { ++ speed = <2500>; ++ full-duplex; ++ }; ++}; ++ ++&pinctrl { ++ spi_flash_pins: spi0-pins-func-1 { ++ mux { ++ function = "flash"; ++ groups = "spi0", "spi0_wp_hold"; ++ }; ++ ++ conf-pu { ++ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ ++ conf-pd { ++ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; ++ drive-strength = ; ++ bias-pull-down = ; ++ }; ++ }; ++}; ++ ++&spi0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi_flash_pins>; ++ status = "okay"; ++ must_tx; ++ enhance_timing; ++ dma_ext; ++ ipm_design; ++ support_quad; ++ tick_dly = <2>; ++ sample_sel = <0>; ++ ++ spi_nand@0 { ++ compatible = "spi-nand"; ++ reg = <0>; ++ spi-max-frequency = <52000000>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "bl2"; ++ reg = <0x0 0x100000>; ++ }; ++ ++ partition@100000 { ++ label = "u-boot-env"; ++ reg = <0x100000 0x80000>; ++ }; ++ ++ partition@180000 { ++ label = "factory"; ++ reg = <0x180000 0x200000>; ++ }; ++ ++ partition@380000 { ++ label = "fip"; ++ reg = <0x380000 0x200000>; ++ }; ++ ++ partition@580000 { ++ label = "ubi"; ++ reg = <0x580000 0x7a80000>; ++ compatible = "linux,ubi"; ++ }; ++ }; ++ }; ++}; ++ ++&uart0 { ++ mediatek,force-highspeed; ++ status = "okay"; ++}; ++ ++&watchdog { ++ status = "disabled"; ++}; +--- /dev/null ++++ b/defenvs/cmcc_a10_env +@@ -0,0 +1,54 @@ ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi ++bootconf=config-1 ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-cmcc_a10-ubootmod-initramfs-recovery.itb ++bootfile_bl2=openwrt-mediatek-filogic-cmcc_a10-ubootmod-preloader.bin ++bootfile_fip=openwrt-mediatek-filogic-cmcc_a10-ubootmod-bl31-uboot.fip ++bootfile_upg=openwrt-mediatek-filogic-cmcc_a10-ubootmod-squashfs-sysupgrade.itb ++bootled_pwr=red:status ++bootled_rec=blue:status ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= ( ( ( OpenWrt ) ) ) ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_8=Reboot.=reset ++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu ++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever ++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off ++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off ++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever ++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done ++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2 ++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800 ++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr ++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr ++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format ++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset ++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi ++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs ++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery ++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize ++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv ++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" diff --git a/target/linux/mediatek/dts/mt7981b-cmcc-a10-stock.dts b/target/linux/mediatek/dts/mt7981b-cmcc-a10-stock.dts new file mode 100644 index 0000000000..96627f8bfb --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-cmcc-a10-stock.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; +#include "mt7981b-cmcc-a10.dtsi" + +/ { + model = "CMCC A10 (stock layout)"; + compatible = "cmcc,a10-stock", "mediatek,mt7981"; +}; + +&partitions { + partition@580000 { + label = "ubi"; + reg = <0x580000 0x4000000>; + }; + + partition@4580000 { + label = "firmware_backup"; + reg = <0x4580000 0x2000000>; + read-only; + }; + + partition@6580000 { + label = "zrsave"; + reg = <0x6580000 0x100000>; + read-only; + }; + + partition@6680000 { + label = "config2"; + reg = <0x6680000 0x100000>; + read-only; + }; +}; + +&spi_nand { + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; +}; diff --git a/target/linux/mediatek/dts/mt7981b-cmcc-a10-ubootmod.dts b/target/linux/mediatek/dts/mt7981b-cmcc-a10-ubootmod.dts new file mode 100644 index 0000000000..f8a1c7f665 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-cmcc-a10-ubootmod.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; +#include "mt7981b-cmcc-a10.dtsi" + +/ { + model = "CMCC A10 (OpenWrt U-Boot layout)"; + compatible = "cmcc,a10-ubootmod", "mediatek,mt7981"; +}; + +&chosen { + bootargs = "root=/dev/fit0 rootwait"; + rootdisk = <&ubi_rootdisk>; +}; + +&partitions { + partition@580000 { + compatible = "linux,ubi"; + label = "ubi"; + reg = <0x580000 0x7a80000>; + + volumes { + ubi_rootdisk: ubi-volume-fit { + volname = "fit"; + }; + }; + }; +}; diff --git a/target/linux/mediatek/dts/mt7981b-cmcc-a10.dtsi b/target/linux/mediatek/dts/mt7981b-cmcc-a10.dtsi new file mode 100644 index 0000000000..fe132aa66a --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-cmcc-a10.dtsi @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2023 Tianling Shen + */ + +/dts-v1/; +#include +#include +#include +#include "mt7981.dtsi" + +/ { + aliases { + led-boot = &boot_led; + led-failsafe = &boot_led; + led-running = &running_led; + led-upgrade = &running_led; + serial0 = &uart0; + }; + + chosen: chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + reg = <0 0x40000000 0 0x10000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + + button-wps { + label = "wps"; + linux,code = ; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + + running_led: led-1 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + }; + + boot_led: led-2 { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + nvmem-cells = <&macaddr_factory_2a 0>; + nvmem-cell-names = "mac-address"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; +}; + +&mdio_bus { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + spi_nand: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "BL2"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "Factory"; + reg = <0x180000 0x200000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr_factory_a: macaddr@a { + compatible = "mac-base"; + reg = <0xa 0x6>; + #nvmem-cell-cells = <1>; + }; + + macaddr_factory_24: macaddr@24 { + compatible = "mac-base"; + reg = <0x24 0x6>; + #nvmem-cell-cells = <1>; + }; + + macaddr_factory_2a: macaddr@2a { + compatible = "mac-base"; + reg = <0x2a 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@380000 { + label = "FIP"; + reg = <0x380000 0x200000>; + read-only; + }; + }; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "wan"; + + nvmem-cells = <&macaddr_factory_24 0>; + nvmem-cell-names = "mac-address"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; + status = "okay"; + + band@1 { + reg = <1>; + nvmem-cells = <&macaddr_factory_a 0>; + nvmem-cell-names = "mac-address"; + }; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index e9f63938b2..5c22992242 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -30,6 +30,8 @@ mediatek_setup_interfaces() ;; asus,rt-ax59u|\ cetron,ct3003|\ + cmcc,a10-stock|\ + cmcc,a10-ubootmod|\ confiabits,mt7981|\ cudy,wr3000-v1|\ jcg,q30-pro|\ diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index 38019e89e5..451a11bc96 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -71,6 +71,7 @@ platform_do_upgrade() { bananapi,bpi-r3-mini|\ bananapi,bpi-r4|\ bananapi,bpi-r4-poe|\ + cmcc,a10-ubootmod|\ cmcc,rax3000m|\ gatonetworks,gdsp|\ h3c,magic-nx30-pro|\ diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index a019f50461..37f6c07774 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -502,6 +502,61 @@ define Device/cetron_ct3003 endef TARGET_DEVICES += cetron_ct3003 +define Device/cmcc_a10-stock + DEVICE_VENDOR := CMCC + DEVICE_MODEL := A10 (stock layout) + DEVICE_ALT0_VENDOR := SuperElectron + DEVICE_ALT0_MODEL := ZN-M5 (stock layout) + DEVICE_ALT1_VENDOR := SuperElectron + DEVICE_ALT1_MODEL := ZN-M8 (stock layout) + DEVICE_DTS := mt7981b-cmcc-a10-stock + DEVICE_DTS_DIR := ../dts + SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 65536k + KERNEL_IN_UBI := 1 + IMAGES += factory.bin + IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + KERNEL = kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb + KERNEL_INITRAMFS = kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd +endef +TARGET_DEVICES += cmcc_a10-stock + +define Device/cmcc_a10-ubootmod + DEVICE_VENDOR := CMCC + DEVICE_MODEL := A10 (OpenWrt U-Boot layout) + DEVICE_ALT0_VENDOR := SuperElectron + DEVICE_ALT0_MODEL := ZN-M5 (OpenWrt U-Boot layout) + DEVICE_ALT1_VENDOR := SuperElectron + DEVICE_ALT1_MODEL := ZN-M8 (OpenWrt U-Boot layout) + DEVICE_DTS := mt7981b-cmcc-a10-ubootmod + DEVICE_DTS_DIR := ../dts + SUPPORTED_DEVICES += cmcc,a10 + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_IN_UBI := 1 + UBOOTENV_IN_UBI := 1 + IMAGES := sysupgrade.itb + KERNEL_INITRAMFS_SUFFIX := -recovery.itb + KERNEL := kernel-bin | gzip + KERNEL_INITRAMFS := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k + IMAGE/sysupgrade.itb := append-kernel | \ + fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata + ARTIFACTS := preloader.bin bl31-uboot.fip + ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3 + ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot cmcc_a10 +endef +TARGET_DEVICES += cmcc_a10-ubootmod + define Device/cmcc_rax3000m DEVICE_VENDOR := CMCC DEVICE_MODEL := RAX3000M -- 2.30.2