From 9637c4b2dd5e84418f7367e5361ba9ff6726e377 Mon Sep 17 00:00:00 2001 From: Evgeni Dobrev Date: Mon, 8 Dec 2014 17:49:42 +0100 Subject: [PATCH] Add support for Seagate BlackArmor NAS220 Add support for Seagate BlackArmor NAS220 Signed-off-by: Evgeni Dobrev --- arch/arm/cpu/arm926ejs/kirkwood/Kconfig | 4 + board/Seagate/nas220/Kconfig | 12 ++ board/Seagate/nas220/MAINTAINERS | 6 + board/Seagate/nas220/Makefile | 7 + board/Seagate/nas220/kwbimage.cfg | 151 +++++++++++++++++++++ board/Seagate/nas220/nas220.c | 118 +++++++++++++++++ configs/nas220_defconfig | 3 + include/configs/nas220.h | 168 ++++++++++++++++++++++++ 8 files changed, 469 insertions(+) create mode 100644 board/Seagate/nas220/Kconfig create mode 100644 board/Seagate/nas220/MAINTAINERS create mode 100644 board/Seagate/nas220/Makefile create mode 100644 board/Seagate/nas220/kwbimage.cfg create mode 100644 board/Seagate/nas220/nas220.c create mode 100644 configs/nas220_defconfig create mode 100644 include/configs/nas220.h diff --git a/arch/arm/cpu/arm926ejs/kirkwood/Kconfig b/arch/arm/cpu/arm926ejs/kirkwood/Kconfig index 6c037a16c9..45c6687d0b 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/Kconfig +++ b/arch/arm/cpu/arm926ejs/kirkwood/Kconfig @@ -57,6 +57,9 @@ config TARGET_DOCKSTAR config TARGET_GOFLEXHOME bool "GoFlex Home Board" +config TARGET_NAS220 + bool "BlackArmor NAS220" + endchoice config SYS_SOC @@ -80,5 +83,6 @@ source "board/LaCie/wireless_space/Kconfig" source "board/raidsonic/ib62x0/Kconfig" source "board/Seagate/dockstar/Kconfig" source "board/Seagate/goflexhome/Kconfig" +source "board/Seagate/nas220/Kconfig" endif diff --git a/board/Seagate/nas220/Kconfig b/board/Seagate/nas220/Kconfig new file mode 100644 index 0000000000..0fa529cde1 --- /dev/null +++ b/board/Seagate/nas220/Kconfig @@ -0,0 +1,12 @@ +if TARGET_NAS220 + +config SYS_BOARD + default "nas220" + +config SYS_VENDOR + default "Seagate" + +config SYS_CONFIG_NAME + default "nas220" + +endif diff --git a/board/Seagate/nas220/MAINTAINERS b/board/Seagate/nas220/MAINTAINERS new file mode 100644 index 0000000000..f2df7ea64f --- /dev/null +++ b/board/Seagate/nas220/MAINTAINERS @@ -0,0 +1,6 @@ +NAS220 BOARD +M: Evgeni Dobrev +S: Maintained +F: board/Seagate/nas220/ +F: include/configs/nas220.h +F: configs/nas220_defconfig diff --git a/board/Seagate/nas220/Makefile b/board/Seagate/nas220/Makefile new file mode 100644 index 0000000000..9de73e6f5e --- /dev/null +++ b/board/Seagate/nas220/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (C) 2014 Evgeni Dobrev +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := nas220.o diff --git a/board/Seagate/nas220/kwbimage.cfg b/board/Seagate/nas220/kwbimage.cfg new file mode 100644 index 0000000000..dbbfb9c020 --- /dev/null +++ b/board/Seagate/nas220/kwbimage.cfg @@ -0,0 +1,151 @@ +# +# Copyright (C) 2014 Evgeni Dobrev +# +# Based on sheevaplug/kwbimage.cfg originally written by +# Prafulla Wadaskar +# (C) Copyright 2009 +# Marvell Semiconductor +# +# SPDX-License-Identifier: GPL-2.0+ +# +# Refer doc/README.kwbimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM nand +NAND_ECC_MODE default +NAND_PAGE_SIZE 0x0200 + +# SOC registers configuration using bootrom header extension +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed + +# Configure RGMII-0 interface pad voltage to 1.8V +DATA 0xFFD100e0 0x1b1b1b9b + +#Dram initalization for SINGLE x16 CL=5 @ 400MHz +DATA 0xFFD01400 0x43000618 # DDR Configuration register +# bit13-0: 0xa00 (2560 DDR2 clks refresh rate) +# bit23-14: zero +# bit24: 1= enable exit self refresh mode on DDR access +# bit25: 1 required +# bit29-26: zero +# bit31-30: 01 + +DATA 0xFFD01404 0x35143000 # DDR Controller Control Low +# bit 4: 0=addr/cmd in smame cycle +# bit 5: 0=clk is driven during self refresh, we don't care for APX +# bit 6: 0=use recommended falling edge of clk for addr/cmd +# bit14: 0=input buffer always powered up +# bit18: 1=cpu lock transaction enabled +# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 +# bit27-24: 8= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM +# bit30-28: 3 required +# bit31: 0=no additional STARTBURST delay + +DATA 0xFFD01408 0x11012227 # DDR Timing (Low) (active cycles value +1) +# bit7-4: TRCD +# bit11- 8: TRP +# bit15-12: TWR +# bit19-16: TWTR +# bit20: TRAS msb +# bit23-21: 0x0 +# bit27-24: TRRD +# bit31-28: TRTP + +DATA 0xFFD0140C 0x00000819 # DDR Timing (High) +# bit6-0: TRFC +# bit8-7: TR2R +# bit10-9: TR2W +# bit12-11: TW2W +# bit31-13: zero required + + +DATA 0xFFD01410 0x0000000d # DDR Address Control +# bit1-0: 00, Cs0width=x8 +# bit3-2: 11, Cs0size=1Gb +# bit5-4: 00, Cs1width=nonexistent +# bit7-6: 00, Cs1size =nonexistent +# bit9-8: 00, Cs2width=nonexistent +# bit11-10: 00, Cs2size =nonexistent +# bit13-12: 00, Cs3width=nonexistent +# bit15-14: 00, Cs3size =nonexistent +# bit16: 0, Cs0AddrSel +# bit17: 0, Cs1AddrSel +# bit18: 0, Cs2AddrSel +# bit19: 0, Cs3AddrSel +# bit31-20: 0 required + +DATA 0xFFD01414 0x00000000 # DDR Open Pages Control +# bit0: 0, OpenPage enabled +# bit31-1: 0 required + +DATA 0xFFD01418 0x00000000 # DDR Operation +# bit3-0: 0x0, DDR cmd +# bit31-4: 0 required + +DATA 0xFFD0141C 0x00000632 # DDR Mode +# bit2-0: 2, BurstLen=2 required +# bit3: 0, BurstType=0 required +# bit6-4: 4, CL=5 +# bit7: 0, TestMode=0 normal +# bit8: 0, DLL reset=0 normal +# bit11-9: 6, auto-precharge write recovery ???????????? +# bit12: 0, PD must be zero +# bit31-13: 0 required + + +DATA 0xFFD01420 0x00000040 # DDR Extended Mode +# bit0: 0, DDR DLL enabled +# bit1: 0, DDR drive strenght normal +# bit2: 0, DDR ODT control lsd (disabled) +# bit5-3: 000, required +# bit6: 1, DDR ODT control msb, (disabled) +# bit9-7: 000, required +# bit10: 0, differential DQS enabled +# bit11: 0, required +# bit12: 0, DDR output buffer enabled +# bit31-13: 0 required + +DATA 0xFFD01424 0x0000F07F # DDR Controller Control High +# bit2-0: 111, required +# bit3 : 1 , MBUS Burst Chop disabled +# bit6-4: 111, required +# bit7 : 0 +# bit8 : 0 +# bit9 : 0 , no half clock cycle addition to dataout +# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals +# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh +# bit15-12: 1111 required +# bit31-16: 0 required + +DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size +# bit0: 1, Window enabled +# bit1: 0, Write Protect disabled +# bit3-2: 00, CS0 hit selected +# bit23-4: ones, required +# bit31-24: 0x07, Size (i.e. 128MB) + +DATA 0xFFD01508 0x00000000 # CS[1]n Base address to 0x0 + +DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled + +DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled +DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled + +DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low) +DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) +# bit1-0: 00, ODT0 controlled by ODT Control (low) register above +# bit3-2: 01, ODT1 active NEVER! +# bit31-4: zero, required + +DATA 0xFFD0149C 0x0000E803 # CPU ODT Control + +DATA 0xFFD01480 0x00000001 # DDR Initialization Control +#bit0=1, enable DDR init upon this register write + +DATA 0xffd01620 0x00465000 + +# End of Header extension +DATA 0x0 0x0 + diff --git a/board/Seagate/nas220/nas220.c b/board/Seagate/nas220/nas220.c new file mode 100644 index 0000000000..d9a06273a3 --- /dev/null +++ b/board/Seagate/nas220/nas220.c @@ -0,0 +1,118 @@ +/* + * Copyright (C) 2014 Evgeni Dobrev + * + * Based on sheevaplug.c originally written by + * Prafulla Wadaskar + * (C) Copyright 2009 + * Marvell Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ + /* + * default gpio configuration + */ + mvebu_config_gpio(NAS220_GE_OE_VAL_LOW, NAS220_GE_OE_VAL_HIGH, + NAS220_GE_OE_LOW, NAS220_GE_OE_HIGH); + + /* Multi-Purpose Pins Functionality configuration */ + static const u32 kwmpp_config[] = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_SPI_SCn, + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, + MPP13_GPIO, + MPP14_GPIO, + MPP15_SATA0_ACTn, + MPP16_SATA1_ACTn, + MPP17_SATA0_PRESENTn, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GPIO, + MPP21_GPIO, + MPP22_GPIO, + MPP23_GPIO, + MPP24_GPIO, + MPP25_GPIO, + MPP26_GPIO, + MPP27_GPIO, + MPP28_GPIO, + MPP29_GPIO, + MPP30_GPIO, + MPP31_GPIO, + MPP32_GPIO, + MPP33_GPIO, + MPP34_GPIO, + MPP35_GPIO, + 0 + }; + kirkwood_mpp_conf(kwmpp_config, NULL); + return 0; +} + +int board_init(void) +{ + /* + * arch number of board + */ + gd->bd->bi_arch_number = MACH_TYPE_NAS220; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; + + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +/* Configure and enable MV88E1116 PHY */ +void reset_phy(void) +{ + u16 reg; + u16 devadr; + char *name = "egiga0"; + + if (miiphy_set_current_dev(name)) + return; + + /* command to read PHY dev address */ + if (miiphy_read(name, 0xEE, 0xEE, (u16 *)&devadr)) { + printf("Err..%s could not read PHY dev address\n", __func__); + return; + } + + /* + * Enable RGMII delay on Tx and Rx for CPU port + * Ref: sec 4.7.2 of chip datasheet + */ + miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); + miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); + reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); + miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); + miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); + + /* reset the phy */ + miiphy_reset(name, devadr); + + printf("88E1116 Initialized on %s\n", name); +} +#endif /* CONFIG_RESET_PHY_R */ diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig new file mode 100644 index 0000000000..5a79c51ef3 --- /dev/null +++ b/configs/nas220_defconfig @@ -0,0 +1,3 @@ +CONFIG_ARM=y +CONFIG_KIRKWOOD=y +CONFIG_TARGET_NAS220=y diff --git a/include/configs/nas220.h b/include/configs/nas220.h new file mode 100644 index 0000000000..cfb85bfe84 --- /dev/null +++ b/include/configs/nas220.h @@ -0,0 +1,168 @@ +/* + * Copyright (C) 2014 Evgeni Dobrev + * + * based on work from: + * (C) Copyright 2009 + * Marvell Semiconductor + * Written-by: Prafulla Wadaskar + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_NAS220_H +#define _CONFIG_NAS220_H + +/* + * Machine type definition and ID + */ +#define MACH_TYPE_NAS220 MACH_TYPE_RD88F6192_NAS +#define CONFIG_MACH_TYPE MACH_TYPE_NAS220 +#define CONFIG_IDENT_STRING "\nNAS 220" + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ +#define CONFIG_KW88F6192 /* SOC Name */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ + +/* power-on led, regulator, sata0, sata1 */ +#define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) +#define NAS220_GE_OE_VAL_HIGH (0) +#define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))) +#define NAS220_GE_OE_HIGH (~(0)) + +/* PHY related */ +#define MV88E1116_LED_FCTRL_REG 10 +#define MV88E1116_CPRSP_CR3_REG 21 +#define MV88E1116_MAC_CTRL_REG 21 +#define MV88E1116_PGADR_REG 22 +#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) +#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#include +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB +#define CONFIG_CMD_DATE +#define CONFIG_CMD_IDE +#define CONFIG_SYS_LONGHELP +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +/* Remove or override few declarations from mv-common.h */ +#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ +#define CONFIG_SYS_PROMPT "nas220> " + +/* + * Environment variables configurations + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SECT_SIZE 0x10000 +#else +#define CONFIG_ENV_IS_NOWHERE +#endif + +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_OFFSET 0xa0000 + +/* + * Default environment variables + */ +#define CONFIG_BOOTCOMMAND "" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs=console=ttyS0,115200\0" \ + "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\ + "0x010000@0xa0000(env),"\ + "0x500000@0xc0000(uimage),"\ + "0x1a40000@0x5c0000(rootfs)\0" \ + "mtdids=nand0=orion_nand\0"\ + "bootdelay=-1\0"\ + "autostart=no\0"\ + "autoload=no\0" + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ +#define CONFIG_PHY_BASE_ADR 8 +#endif /* CONFIG_CMD_NET */ + +/* + * USB/EHCI + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI /* Enable EHCI USB support */ +#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_SUPPORT_VFAT +#endif /* CONFIG_CMD_USB */ + +/* + * File system + */ +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_JFFS2_NAND +#define CONFIG_JFFS2_LZO +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_RBTREE +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_LZO + +/* + * SATA + */ +#ifdef CONFIG_MVSATA_IDE +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET +#endif + + +/* + * Device Tree + */ +#define CONFIG_OF_LIBFDT + +/* + * EFI partition + */ +#define CONFIG_EFI_PARTITION + +/* + * Date Time + */ +#ifdef CONFIG_CMD_DATE +#define CONFIG_RTC_MV +#endif /* CONFIG_CMD_DATE */ + +#define CONFIG_KIRKWOOD_GPIO + +#endif /* _CONFIG_NAS220_H */ + -- 2.30.2