From 95d185894bcb6c3dffb70ef69f3c80516d19bd49 Mon Sep 17 00:00:00 2001 From: Matthias Weisser Date: Wed, 6 Jul 2011 00:28:32 +0000 Subject: [PATCH] imx: Make imx25 compatible to mxc_gpio driver and fix in tx25 Adding support for mxc_gpio driver for imx25 and fix names of registers in tx25 board. Signed-off-by: Matthias Weisser --- arch/arm/include/asm/arch-mx25/imx-regs.h | 10 +++++++-- board/karo/tx25/tx25.c | 26 +++++++++++------------ include/mxc_gpio.h | 5 +++++ 3 files changed, 26 insertions(+), 15 deletions(-) diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h index 62ee4d537b..2ccb445975 100644 --- a/arch/arm/include/asm/arch-mx25/imx-regs.h +++ b/arch/arm/include/asm/arch-mx25/imx-regs.h @@ -86,8 +86,8 @@ struct esdramc_regs { /* GPIO registers */ struct gpio_regs { - u32 dr; /* data */ - u32 dir; /* direction */ + u32 gpio_dr; /* data */ + u32 gpio_dir; /* direction */ u32 psr; /* pad satus */ u32 icr1; /* interrupt config 1 */ u32 icr2; /* interrupt config 2 */ @@ -357,4 +357,10 @@ struct aips_regs { #define WSR_UNLOCK1 0x5555 #define WSR_UNLOCK2 0xAAAA +/* Names used in GPIO driver */ +#define GPIO1_BASE_ADDR IMX_GPIO1_BASE +#define GPIO2_BASE_ADDR IMX_GPIO2_BASE +#define GPIO3_BASE_ADDR IMX_GPIO3_BASE +#define GPIO4_BASE_ADDR IMX_GPIO4_BASE + #endif /* _IMX_REGS_H */ diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c index 269858c6ee..4088374bc5 100644 --- a/board/karo/tx25/tx25.c +++ b/board/karo/tx25/tx25.c @@ -70,18 +70,18 @@ void tx25_fec_init(void) writel(0x0, &padctl->pad_d11); /* drop PHY power and assert reset (low) */ - val = readl(&gpio4->dr) & ~((1 << 7) | (1 << 9)); - writel(val, &gpio4->dr); - val = readl(&gpio4->dir) | (1 << 7) | (1 << 9); - writel(val, &gpio4->dir); + val = readl(&gpio4->gpio_dr) & ~((1 << 7) | (1 << 9)); + writel(val, &gpio4->gpio_dr); + val = readl(&gpio4->gpio_dir) | (1 << 7) | (1 << 9); + writel(val, &gpio4->gpio_dir); mdelay(5); debug("resetting phy\n"); /* turn on PHY power leaving reset asserted */ - val = readl(&gpio4->dr) | 1 << 9; - writel(val, &gpio4->dr); + val = readl(&gpio4->gpio_dr) | 1 << 9; + writel(val, &gpio4->gpio_dr); mdelay(10); @@ -111,19 +111,19 @@ void tx25_fec_init(void) /* * set each to 1 and make each an output */ - val = readl(&gpio3->dr) | (1 << 10) | (1 << 11) | (1 << 12); - writel(val, &gpio3->dr); - val = readl(&gpio3->dir) | (1 << 10) | (1 << 11) | (1 << 12); - writel(val, &gpio3->dir); + val = readl(&gpio3->gpio_dr) | (1 << 10) | (1 << 11) | (1 << 12); + writel(val, &gpio3->gpio_dr); + val = readl(&gpio3->gpio_dir) | (1 << 10) | (1 << 11) | (1 << 12); + writel(val, &gpio3->gpio_dir); mdelay(22); /* this value came from RedBoot */ /* * deassert PHY reset */ - val = readl(&gpio4->dr) | 1 << 7; - writel(val, &gpio4->dr); - writel(val, &gpio4->dr); + val = readl(&gpio4->gpio_dr) | 1 << 7; + writel(val, &gpio4->gpio_dr); + writel(val, &gpio4->gpio_dr); mdelay(5); diff --git a/include/mxc_gpio.h b/include/mxc_gpio.h index 002ba61e00..f673dcecd6 100644 --- a/include/mxc_gpio.h +++ b/include/mxc_gpio.h @@ -24,6 +24,11 @@ #ifndef __MXC_GPIO_H #define __MXC_GPIO_H +/* Converts a GPIO port number and the internal bit position + * to the GPIO number + */ +#define MXC_GPIO_PORT_TO_NUM(port, bit) (((port - 1) << 5) + (bit & 0x1f)) + enum mxc_gpio_direction { MXC_GPIO_DIRECTION_IN, MXC_GPIO_DIRECTION_OUT, -- 2.30.2