From 95577e7bd108b5c70e5c757ce5b73545e068b8d6 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Micha=C5=82=20K=C4=99pie=C5=84?= Date: Tue, 18 Apr 2023 15:48:41 +0200 Subject: [PATCH] ath79: add support for MikroTik RB951Ui-2HnD MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit MikroTik RB951Ui-2HnD is a wireless SOHO router that was previously supported by the ar71xx target, see commit d19b868b12 ("ar71xx: Add support for MikroTik RB951Ui-2HnD"). Specifications -------------- - SoC: Atheros AR9344 (600 MHz) - RAM: 128 MB (2x 64 MB) - Storage: 128 MB NAND flash (various manufacturers) - Ethernet: Atheros AR8229 switch, 5x 10/100 Mbit/s - 1x PoE in (port 1, 8-30 V input) - 1x PoE out (port 5, 500 mA output) - Wireless: Atheros AR9340 (802.11b/g/n) - USB: 2.0 (1A) - 9x LED: - 1x power (green, not configurable) - 1x user (green) - 5x FE ports (green) - 1x wireless (green) - 1x PoE out (red) - 1x button (restart) See https://mikrotik.com/product/RB951Ui-2HnD for more details. Flashing -------- TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedures at https://openwrt.org/toh/mikrotik/common. Signed-off-by: Michał Kępień --- ...ar9344_mikrotik_routerboard-951ui-2hnd.dts | 153 ++++++++++++++++++ target/linux/ath79/image/mikrotik.mk | 9 ++ .../mikrotik/base-files/etc/board.d/01_leds | 1 + .../base-files/etc/board.d/02_network | 1 + .../etc/hotplug.d/firmware/10-ath9k-eeprom | 3 + .../base-files/lib/upgrade/platform.sh | 1 + 6 files changed, 168 insertions(+) create mode 100644 target/linux/ath79/dts/ar9344_mikrotik_routerboard-951ui-2hnd.dts diff --git a/target/linux/ath79/dts/ar9344_mikrotik_routerboard-951ui-2hnd.dts b/target/linux/ath79/dts/ar9344_mikrotik_routerboard-951ui-2hnd.dts new file mode 100644 index 00000000000..3d59a30f112 --- /dev/null +++ b/target/linux/ath79/dts/ar9344_mikrotik_routerboard-951ui-2hnd.dts @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9344_mikrotik_routerboard.dtsi" + +/ { + compatible = "mikrotik,routerboard-951ui-2hnd", "qca,ar9344"; + model = "Mikrotik RouterBOARD 951Ui-2HnD"; + + /delete-node/ leds; + + leds { + compatible = "gpio-leds"; + + led_user: user { + label = "green:user"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + port1 { + label = "green:port1"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + port2 { + label = "green:port2"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + + port3 { + label = "green:port3"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + port4 { + label = "green:port4"; + gpios = <&gpio 21 GPIO_ACTIVE_LOW>; + }; + + port5 { + label = "green:port5"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-export { + compatible = "gpio-export"; + + gpio_poe_power { + gpio-export,name = "rb951ui2hnd:power:poe"; + gpio-export,output = <1>; + gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + }; + + gpio_usb_power { + gpio-export,name = "rb951ui2hnd:power:usb"; + gpio-export,output = <1>; + gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpio { + nand_power { + gpio-hog; + gpios = <14 GPIO_ACTIVE_LOW>; + output-high; + }; +}; + +&nand { + status = "okay"; + + nand-ecc-mode = "soft"; + qca,nand-swap-dma; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "booter"; + reg = <0x0000000 0x0040000>; + read-only; + }; + + partition@40000 { + label = "kernel"; + reg = <0x0040000 0x03c0000>; + }; + + partition@400000 { + label = "ubi"; + reg = <0x0400000 0x7c00000>; + }; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "mikrotik,routerboot-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "routerboot"; + reg = <0x0 0x0>; + read-only; + }; + + hard_config: hard_config { + read-only; + }; + + bios { + size = <0x1000>; + read-only; + }; + + soft_config { + }; + }; + }; +}; + +ð0 { + phy-handle = <&swphy4>; + + /delete-node/ gmac-config; +}; + +ð1 { + compatible = "qca,ar9340-eth", "syscon"; +}; + +&wmac { + qca,led-pin = /bits/ 8 <11>; +}; + +&usb { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk index fb0035fb653..3f65b35c8c5 100644 --- a/target/linux/ath79/image/mikrotik.mk +++ b/target/linux/ath79/image/mikrotik.mk @@ -48,6 +48,15 @@ define Device/mikrotik_routerboard-922uags-5hpacd endef TARGET_DEVICES += mikrotik_routerboard-922uags-5hpacd +define Device/mikrotik_routerboard-951ui-2hnd + $(Device/mikrotik_nand) + SOC := ar9344 + DEVICE_MODEL := RouterBOARD 951Ui-2HnD + DEVICE_PACKAGES += kmod-usb-ohci kmod-usb2 + SUPPORTED_DEVICES += rb-951ui-2hnd +endef +TARGET_DEVICES += mikrotik_routerboard-951ui-2hnd + define Device/mikrotik_routerboard-951ui-2nd $(Device/mikrotik_nor) SOC := qca9531 diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds index 4c1b98fff22..31346ebdf58 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds @@ -16,6 +16,7 @@ mikrotik,routerboard-lhg-5nd) ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "60" "100" ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "80" "100" ;; +mikrotik,routerboard-951ui-2hnd|\ mikrotik,routerboard-951ui-2nd|\ mikrotik,routerboard-952ui-5ac2nd) ucidef_set_led_netdev "port1" "port1" "green:port1" "eth1" diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network index da63347c3c0..aba811fb2d1 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network @@ -25,6 +25,7 @@ ath79_setup_interfaces() mikrotik,routerboard-wapr-2nd) ucidef_set_interface_lan "eth0" ;; + mikrotik,routerboard-951ui-2hnd|\ mikrotik,routerboard-951ui-2nd|\ mikrotik,routerboard-952ui-5ac2nd) ucidef_set_interface_wan "eth1" diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index e0bf1e47efb..b23bd05bcd5 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -46,6 +46,9 @@ case "$FIRMWARE" in mikrotik,routerboard-962uigs-5hact2hnt) caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 7) ;; + mikrotik,routerboard-951ui-2hnd) + caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" +11) + ;; *) caldata_die "board $board is not supported yet" ;; diff --git a/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh b/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh index 93a9c3a855e..cefbc5d3341 100644 --- a/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh @@ -33,6 +33,7 @@ platform_do_upgrade() { mikrotik,routerboard-912uag-2hpnd|\ mikrotik,routerboard-921gs-5hpacd-15s|\ mikrotik,routerboard-922uags-5hpacd|\ + mikrotik,routerboard-951ui-2hnd|\ mikrotik,routerboard-sxt-5nd-r2) platform_do_upgrade_mikrotik_nand "$1" ;; -- 2.30.2