From 94f05b0f60de32e6efa19310bd142f1519e2abdb Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 14 Aug 2011 12:16:20 +0000 Subject: [PATCH] bnx2x: Coalesce pr_cont uses and fix DP typos Uses of pr_cont should be avoided where reasonably possible because they can be interleaved by other threads and processes. Coalesce pr_cont uses. Fix typos, duplicated words and spacing in DP uses caused by split multi-line formats. Coalesce some of these split formats. Add missing terminating newlines to DP uses. Signed-off-by: Joe Perches Acked-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 42 ++--- .../net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 4 +- .../net/ethernet/broadcom/bnx2x/bnx2x_dcb.c | 2 +- .../net/ethernet/broadcom/bnx2x/bnx2x_link.c | 153 +++++++++--------- .../net/ethernet/broadcom/bnx2x/bnx2x_main.c | 33 ++-- .../net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 23 +-- 6 files changed, 134 insertions(+), 123 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index d724a18b5285..3254b9e7c2ea 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -953,15 +953,16 @@ void __bnx2x_link_report(struct bnx2x *bp) netdev_err(bp->dev, "NIC Link is Down\n"); return; } else { + const char *duplex; + const char *flow; + netif_carrier_on(bp->dev); - netdev_info(bp->dev, "NIC Link is Up, "); - pr_cont("%d Mbps ", cur_data.line_speed); if (test_and_clear_bit(BNX2X_LINK_REPORT_FD, &cur_data.link_report_flags)) - pr_cont("full duplex"); + duplex = "full"; else - pr_cont("half duplex"); + duplex = "half"; /* Handle the FC at the end so that only these flags would be * possibly set. This way we may easily check if there is no FC @@ -970,16 +971,19 @@ void __bnx2x_link_report(struct bnx2x *bp) if (cur_data.link_report_flags) { if (test_bit(BNX2X_LINK_REPORT_RX_FC_ON, &cur_data.link_report_flags)) { - pr_cont(", receive "); if (test_bit(BNX2X_LINK_REPORT_TX_FC_ON, &cur_data.link_report_flags)) - pr_cont("& transmit "); + flow = "ON - receive & transmit"; + else + flow = "ON - receive"; } else { - pr_cont(", transmit "); + flow = "ON - transmit"; } - pr_cont("flow control ON"); + } else { + flow = "none"; } - pr_cont("\n"); + netdev_info(bp->dev, "NIC Link is Up, %d Mbps %s duplex, Flow control: %s\n", + cur_data.line_speed, duplex, flow); } } @@ -2584,7 +2588,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) #endif /* enable this debug print to view the transmission queue being used - DP(BNX2X_MSG_FP, "indices: txq %d, fp %d, txdata %d", + DP(BNX2X_MSG_FP, "indices: txq %d, fp %d, txdata %d\n", txq_index, fp_index, txdata_index); */ /* locate the fastpath and the txdata */ @@ -2593,7 +2597,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) /* enable this debug print to view the tranmission details DP(BNX2X_MSG_FP,"transmitting packet cid %d fp index %d txdata_index %d" - " tx_data ptr %p fp pointer %p", + " tx_data ptr %p fp pointer %p\n", txdata->cid, fp_index, txdata_index, txdata, fp); */ if (unlikely(bnx2x_tx_avail(bp, txdata) < @@ -2910,14 +2914,14 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc) /* requested to support too many traffic classes */ if (num_tc > bp->max_cos) { DP(NETIF_MSG_TX_ERR, "support for too many traffic classes" - " requested: %d. max supported is %d", + " requested: %d. max supported is %d\n", num_tc, bp->max_cos); return -EINVAL; } /* declare amount of supported traffic classes */ if (netdev_set_num_tc(dev, num_tc)) { - DP(NETIF_MSG_TX_ERR, "failed to declare %d traffic classes", + DP(NETIF_MSG_TX_ERR, "failed to declare %d traffic classes\n", num_tc); return -EINVAL; } @@ -2925,7 +2929,7 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc) /* configure priority to traffic class mapping */ for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) { netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[prio]); - DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", + DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", prio, bp->prio_to_cos[prio]); } @@ -2934,10 +2938,10 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc) This can be used for ets or pfc, and save the effort of setting up a multio class queue disc or negotiating DCBX with a switch netdev_set_prio_tc_map(dev, 0, 0); - DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", 0, 0); + DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", 0, 0); for (prio = 1; prio < 16; prio++) { netdev_set_prio_tc_map(dev, prio, 1); - DP(BNX2X_MSG_SP, "mapping priority %d to tc %d", prio, 1); + DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", prio, 1); } */ /* configure traffic class to transmission queue mapping */ @@ -2945,7 +2949,7 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc) count = BNX2X_NUM_ETH_QUEUES(bp); offset = cos * MAX_TXQS_PER_COS; netdev_set_tc_queue(dev, cos, count, offset); - DP(BNX2X_MSG_SP, "mapping tc %d to offset %d count %d", + DP(BNX2X_MSG_SP, "mapping tc %d to offset %d count %d\n", cos, offset, count); } @@ -3033,7 +3037,7 @@ static void bnx2x_free_fp_mem_at(struct bnx2x *bp, int fp_index) struct bnx2x_fp_txdata *txdata = &fp->txdata[cos]; DP(BNX2X_MSG_SP, - "freeing tx memory of fp %d cos %d cid %d", + "freeing tx memory of fp %d cos %d cid %d\n", fp_index, cos, txdata->cid); BNX2X_FREE(txdata->tx_buf_ring); @@ -3115,7 +3119,7 @@ static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index) struct bnx2x_fp_txdata *txdata = &fp->txdata[cos]; DP(BNX2X_MSG_SP, "allocating tx memory of " - "fp %d cos %d", + "fp %d cos %d\n", index, cos); BNX2X_ALLOC(txdata->tx_buf_ring, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 223bfeebc597..501a24b4767e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -1289,7 +1289,7 @@ static inline void bnx2x_init_txdata(struct bnx2x *bp, txdata->txq_index = txq_index; txdata->tx_cons_sb = tx_cons_sb; - DP(BNX2X_MSG_SP, "created tx data cid %d, txq %d", + DP(BNX2X_MSG_SP, "created tx data cid %d, txq %d\n", txdata->cid, txdata->txq_index); } @@ -1333,7 +1333,7 @@ static inline void bnx2x_init_fcoe_fp(struct bnx2x *bp) bnx2x_init_txdata(bp, &bnx2x_fcoe(bp, txdata[0]), fp->cid, FCOE_TXQ_IDX(bp), BNX2X_FCOE_L2_TX_INDEX); - DP(BNX2X_MSG_SP, "created fcoe tx data (fp index %d)", fp->index); + DP(BNX2X_MSG_SP, "created fcoe tx data (fp index %d)\n", fp->index); /* qZone id equals to FW (per path) client id */ bnx2x_fcoe(bp, cl_qzone_id) = bnx2x_fp_qzone_id(fp); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c index a4ea35f6a456..38b5ca527a32 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c @@ -350,7 +350,7 @@ static void bnx2x_dcbx_map_nw(struct bnx2x *bp) if (cos_params[i].pri_bitmask & nw_prio) { /* extend the bitmask with unmapped */ DP(NETIF_MSG_LINK, - "cos %d extended with 0x%08x", i, unmapped); + "cos %d extended with 0x%08x\n", i, unmapped); cos_params[i].pri_bitmask |= unmapped; break; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index d45b1555a602..e3de6fedf218 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -694,8 +694,8 @@ static int bnx2x_ets_e3b0_disabled(const struct link_params *params, struct bnx2x *bp = params->bp; if (!CHIP_IS_E3B0(bp)) { - DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_disabled the chip isn't E3B0" - "\n"); + DP(NETIF_MSG_LINK, + "bnx2x_ets_e3b0_disabled the chip isn't E3B0\n"); return -EINVAL; } @@ -854,8 +854,8 @@ static int bnx2x_ets_e3b0_get_total_bw( if (bnx2x_cos_state_bw == ets_params->cos[cos_idx].state) { if (0 == ets_params->cos[cos_idx].params.bw_params.bw) { - DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW" - "was set to 0\n"); + DP(NETIF_MSG_LINK, + "bnx2x_ets_E3B0_config BW was set to 0\n"); return -EINVAL; } *total_bw += @@ -866,12 +866,12 @@ static int bnx2x_ets_e3b0_get_total_bw( /*Check taotl BW is valid */ if ((100 != *total_bw) || (0 == *total_bw)) { if (0 == *total_bw) { - DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW" - "shouldn't be 0\n"); + DP(NETIF_MSG_LINK, + "bnx2x_ets_E3B0_config toatl BW shouldn't be 0\n"); return -EINVAL; } - DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW should be" - "100\n"); + DP(NETIF_MSG_LINK, + "bnx2x_ets_E3B0_config toatl BW should be 100\n"); /** * We can handle a case whre the BW isn't 100 this can happen * if the TC are joined. @@ -908,13 +908,13 @@ static int bnx2x_ets_e3b0_sp_pri_to_cos_set(const struct link_params *params, if (DCBX_INVALID_COS != sp_pri_to_cos[pri]) { DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid " - "parameter There can't be two COS's with" + "parameter There can't be two COS's with " "the same strict pri\n"); return -EINVAL; } if (pri > max_num_of_cos) { - DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid" + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid " "parameter Illegal strict priority\n"); return -EINVAL; } @@ -1090,8 +1090,8 @@ int bnx2x_ets_e3b0_config(const struct link_params *params, u8 cos_entry = 0; if (!CHIP_IS_E3B0(bp)) { - DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_disabled the chip isn't E3B0" - "\n"); + DP(NETIF_MSG_LINK, + "bnx2x_ets_e3b0_disabled the chip isn't E3B0\n"); return -EINVAL; } @@ -1108,8 +1108,8 @@ int bnx2x_ets_e3b0_config(const struct link_params *params, bnx2x_status = bnx2x_ets_e3b0_get_total_bw(params, ets_params, &total_bw); if (0 != bnx2x_status) { - DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config get_total_bw failed " - "\n"); + DP(NETIF_MSG_LINK, + "bnx2x_ets_E3B0_config get_total_bw failed\n"); return -EINVAL; } @@ -1144,13 +1144,13 @@ int bnx2x_ets_e3b0_config(const struct link_params *params, cos_entry); } else { - DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_config cos state not" - " valid\n"); + DP(NETIF_MSG_LINK, + "bnx2x_ets_e3b0_config cos state not valid\n"); return -EINVAL; } if (0 != bnx2x_status) { - DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_config set cos bw " - "failed\n"); + DP(NETIF_MSG_LINK, + "bnx2x_ets_e3b0_config set cos bw failed\n"); return bnx2x_status; } } @@ -1160,8 +1160,8 @@ int bnx2x_ets_e3b0_config(const struct link_params *params, sp_pri_to_cos); if (0 != bnx2x_status) { - DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config set_pri_cli_reg " - "failed\n"); + DP(NETIF_MSG_LINK, + "bnx2x_ets_E3B0_config set_pri_cli_reg failed\n"); return bnx2x_status; } @@ -1618,8 +1618,8 @@ static void bnx2x_xmac_init(struct bnx2x *bp, u32 max_speed) if (is_port4mode && (REG_RD(bp, MISC_REG_RESET_REG_2) & MISC_REGISTERS_RESET_REG_2_XMAC)) { - DP(NETIF_MSG_LINK, "XMAC already out of reset" - " in 4-port mode\n"); + DP(NETIF_MSG_LINK, + "XMAC already out of reset in 4-port mode\n"); return; } @@ -1642,13 +1642,13 @@ static void bnx2x_xmac_init(struct bnx2x *bp, u32 max_speed) /* Set the number of ports on the system side to 1 */ REG_WR(bp, MISC_REG_XMAC_CORE_PORT_MODE, 0); if (max_speed == SPEED_10000) { - DP(NETIF_MSG_LINK, "Init XMAC to 10G x 1" - " port per path\n"); + DP(NETIF_MSG_LINK, + "Init XMAC to 10G x 1 port per path\n"); /* Set the number of ports on the Warp Core to 10G */ REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 3); } else { - DP(NETIF_MSG_LINK, "Init XMAC to 20G x 2 ports" - " per path\n"); + DP(NETIF_MSG_LINK, + "Init XMAC to 20G x 2 ports per path\n"); /* Set the number of ports on the Warp Core to 20G */ REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 1); } @@ -3959,8 +3959,8 @@ static void bnx2x_warpcore_set_sgmii_speed(struct bnx2x_phy *phy, val16 |= 0x0040; break; default: - DP(NETIF_MSG_LINK, "Speed not supported: 0x%x" - "\n", phy->req_line_speed); + DP(NETIF_MSG_LINK, + "Speed not supported: 0x%x\n", phy->req_line_speed); return; } @@ -4092,9 +4092,9 @@ static int bnx2x_get_mod_abs_int_cfg(struct bnx2x *bp, */ if ((cfg_pin < PIN_CFG_GPIO0_P0) || (cfg_pin > PIN_CFG_GPIO3_P1)) { - DP(NETIF_MSG_LINK, "ERROR: Invalid cfg pin %x for " - "module detect indication\n", - cfg_pin); + DP(NETIF_MSG_LINK, + "ERROR: Invalid cfg pin %x for module detect indication\n", + cfg_pin); return -EINVAL; } @@ -4222,8 +4222,9 @@ static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy, break; default: - DP(NETIF_MSG_LINK, "Unsupported Serdes Net Interface " - "0x%x\n", serdes_net_if); + DP(NETIF_MSG_LINK, + "Unsupported Serdes Net Interface 0x%x\n", + serdes_net_if); return; } } @@ -6127,8 +6128,8 @@ static int bnx2x_link_initialize(struct link_params *params, if (phy_index == EXT_PHY2 && (bnx2x_phy_selection(params) == PORT_HW_CFG_PHY_SELECTION_FIRST_PHY)) { - DP(NETIF_MSG_LINK, "Not initializing" - " second phy\n"); + DP(NETIF_MSG_LINK, + "Not initializing second phy\n"); continue; } params->phy[phy_index].config_init( @@ -6447,8 +6448,8 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars) */ if (active_external_phy == EXT_PHY1) { if (params->phy[EXT_PHY2].phy_specific_func) { - DP(NETIF_MSG_LINK, "Disabling TX on" - " EXT_PHY2\n"); + DP(NETIF_MSG_LINK, + "Disabling TX on EXT_PHY2\n"); params->phy[EXT_PHY2].phy_specific_func( ¶ms->phy[EXT_PHY2], params, DISABLE_TX); @@ -7341,8 +7342,8 @@ static int bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy, u16 val = 0; u16 i; if (byte_cnt > 16) { - DP(NETIF_MSG_LINK, "Reading from eeprom is" - " is limited to 0xf\n"); + DP(NETIF_MSG_LINK, + "Reading from eeprom is limited to 0xf\n"); return -EINVAL; } /* Set the read command byte count */ @@ -7413,8 +7414,8 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, " addr %d, cnt %d\n", addr, byte_cnt);*/ if (byte_cnt > 16) { - DP(NETIF_MSG_LINK, "Reading from eeprom is" - " is limited to 16 bytes\n"); + DP(NETIF_MSG_LINK, + "Reading from eeprom is limited to 16 bytes\n"); return -EINVAL; } @@ -7443,8 +7444,8 @@ static int bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy, u16 val, i; if (byte_cnt > 16) { - DP(NETIF_MSG_LINK, "Reading from eeprom is" - " is limited to 0xf\n"); + DP(NETIF_MSG_LINK, + "Reading from eeprom is limited to 0xf\n"); return -EINVAL; } @@ -7591,13 +7592,14 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, check_limiting_mode = 1; } else if (copper_module_type & SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) { - DP(NETIF_MSG_LINK, "Passive Copper" - " cable detected\n"); + DP(NETIF_MSG_LINK, + "Passive Copper cable detected\n"); *edc_mode = EDC_MODE_PASSIVE_DAC; } else { - DP(NETIF_MSG_LINK, "Unknown copper-cable-" - "type 0x%x !!!\n", copper_module_type); + DP(NETIF_MSG_LINK, + "Unknown copper-cable-type 0x%x !!!\n", + copper_module_type); return -EINVAL; } break; @@ -7635,8 +7637,8 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, SFP_EEPROM_OPTIONS_ADDR, SFP_EEPROM_OPTIONS_SIZE, options) != 0) { - DP(NETIF_MSG_LINK, "Failed to read Option" - " field from module EEPROM\n"); + DP(NETIF_MSG_LINK, + "Failed to read Option field from module EEPROM\n"); return -EINVAL; } if ((options[0] & SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK)) @@ -7677,15 +7679,15 @@ static int bnx2x_verify_sfp_module(struct bnx2x_phy *phy, FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY) { /* Use first phy request only in case of non-dual media*/ if (DUAL_MEDIA(params)) { - DP(NETIF_MSG_LINK, "FW does not support OPT MDL " - "verification\n"); + DP(NETIF_MSG_LINK, + "FW does not support OPT MDL verification\n"); return -EINVAL; } cmd = DRV_MSG_CODE_VRFY_FIRST_PHY_OPT_MDL; } else { /* No support in OPT MDL detection */ - DP(NETIF_MSG_LINK, "FW does not support OPT MDL " - "verification\n"); + DP(NETIF_MSG_LINK, + "FW does not support OPT MDL verification\n"); return -EINVAL; } @@ -7736,8 +7738,9 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, for (timeout = 0; timeout < 60; timeout++) { if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val) == 0) { - DP(NETIF_MSG_LINK, "SFP+ module initialization " - "took %d ms\n", timeout * 5); + DP(NETIF_MSG_LINK, + "SFP+ module initialization took %d ms\n", + timeout * 5); return 0; } msleep(5); @@ -8506,8 +8509,8 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy, /* Set TX PreEmphasis if needed */ if ((params->feature_config_flags & FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { - DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x," - "TX_CTRL2 0x%x\n", + DP(NETIF_MSG_LINK, + "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x\n", phy->tx_preemphasis[0], phy->tx_preemphasis[1]); bnx2x_cl45_write(bp, phy, @@ -8788,8 +8791,8 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy, if (mod_abs & (1<<8)) { /* Module is absent */ - DP(NETIF_MSG_LINK, "MOD_ABS indication " - "show module is absent\n"); + DP(NETIF_MSG_LINK, + "MOD_ABS indication show module is absent\n"); phy->media_type = ETH_PHY_NOT_PRESENT; /* * 1. Set mod_abs to detect next module @@ -8816,8 +8819,8 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy, } else { /* Module is present */ - DP(NETIF_MSG_LINK, "MOD_ABS indication " - "show module is present\n"); + DP(NETIF_MSG_LINK, + "MOD_ABS indication show module is present\n"); /* * First disable transmitter, and if the module is ok, the * module_detection will enable it @@ -8908,8 +8911,9 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy, if ((val1 & (1<<8)) == 0) { if (!CHIP_IS_E1x(bp)) oc_port = BP_PATH(bp) + (params->port << 1); - DP(NETIF_MSG_LINK, "8727 Power fault has been detected" - " on port %d\n", oc_port); + DP(NETIF_MSG_LINK, + "8727 Power fault has been detected on port %d\n", + oc_port); netdev_err(bp->dev, "Error: Power fault on Port %d has" " been detected and the power to " "that SFP+ module has been removed" @@ -9690,8 +9694,8 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy, MDIO_AN_REG_8481_EXPANSION_REG_RD_RW, &legacy_status); - DP(NETIF_MSG_LINK, "Legacy speed status" - " = 0x%x\n", legacy_status); + DP(NETIF_MSG_LINK, "Legacy speed status = 0x%x\n", + legacy_status); link_up = ((legacy_status & (1<<11)) == (1<<11)); if (link_up) { legacy_speed = (legacy_status & (3<<9)); @@ -9709,9 +9713,10 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy, else vars->duplex = DUPLEX_HALF; - DP(NETIF_MSG_LINK, "Link is up in %dMbps," - " is_duplex_full= %d\n", vars->line_speed, - (vars->duplex == DUPLEX_FULL)); + DP(NETIF_MSG_LINK, + "Link is up in %dMbps, is_duplex_full= %d\n", + vars->line_speed, + (vars->duplex == DUPLEX_FULL)); /* Check legacy speed AN resolution */ bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, @@ -10286,9 +10291,10 @@ static u8 bnx2x_54618se_read_status(struct bnx2x_phy *phy, } else /* Should not happen */ vars->line_speed = 0; - DP(NETIF_MSG_LINK, "Link is up in %dMbps," - " is_duplex_full= %d\n", vars->line_speed, - (vars->duplex == DUPLEX_FULL)); + DP(NETIF_MSG_LINK, + "Link is up in %dMbps, is_duplex_full= %d\n", + vars->line_speed, + (vars->duplex == DUPLEX_FULL)); /* Check legacy speed AN resolution */ bnx2x_cl22_read(bp, phy, @@ -11336,8 +11342,9 @@ static void bnx2x_phy_def_cfg(struct link_params *params, dev_info. port_hw_config[params->port].speed_capability_mask)); } - DP(NETIF_MSG_LINK, "Default config phy idx %x cfg 0x%x speed_cap_mask" - " 0x%x\n", phy_index, link_config, phy->speed_cap_mask); + DP(NETIF_MSG_LINK, + "Default config phy idx %x cfg 0x%x speed_cap_mask 0x%x\n", + phy_index, link_config, phy->speed_cap_mask); phy->req_duplex = DUPLEX_FULL; switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 173b258b855f..e899e87f722d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -4388,7 +4388,7 @@ static inline void bnx2x_handle_rx_mode_eqe(struct bnx2x *bp) static inline struct bnx2x_queue_sp_obj *bnx2x_cid_to_q_obj( struct bnx2x *bp, u32 cid) { - DP(BNX2X_MSG_SP, "retrieving fp from cid %d", cid); + DP(BNX2X_MSG_SP, "retrieving fp from cid %d\n", cid); #ifdef BCM_CNIC if (cid == BNX2X_FCOE_ETH_CID) return &bnx2x_fcoe(bp, q_obj); @@ -7176,7 +7176,7 @@ static inline void bnx2x_pf_q_prep_init(struct bnx2x *bp, /* set maximum number of COSs supported by this queue */ init_params->max_cos = fp->max_cos; - DP(BNX2X_MSG_SP, "fp: %d setting queue params max cos to: %d", + DP(BNX2X_MSG_SP, "fp: %d setting queue params max cos to: %d\n", fp->index, init_params->max_cos); /* set the context pointers queue object */ @@ -7209,7 +7209,7 @@ int bnx2x_setup_tx_only(struct bnx2x *bp, struct bnx2x_fastpath *fp, DP(BNX2X_MSG_SP, "preparing to send tx-only ramrod for connection:" "cos %d, primary cid %d, cid %d, " - "client id %d, sp-client id %d, flags %lx", + "client id %d, sp-client id %d, flags %lx\n", tx_index, q_params->q_obj->cids[FIRST_TX_COS_INDEX], q_params->q_obj->cids[tx_index], q_params->q_obj->cl_id, tx_only_params->gen_params.spcl_id, tx_only_params->flags); @@ -7241,7 +7241,7 @@ int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp, int rc; u8 tx_index; - DP(BNX2X_MSG_SP, "setting up queue %d", fp->index); + DP(BNX2X_MSG_SP, "setting up queue %d\n", fp->index); /* reset IGU state skip FCoE L2 queue */ if (!IS_FCOE_FP(fp)) @@ -7265,7 +7265,7 @@ int bnx2x_setup_queue(struct bnx2x *bp, struct bnx2x_fastpath *fp, return rc; } - DP(BNX2X_MSG_SP, "init complete"); + DP(BNX2X_MSG_SP, "init complete\n"); /* Now move the Queue to the SETUP state... */ @@ -7319,7 +7319,7 @@ static int bnx2x_stop_queue(struct bnx2x *bp, int index) struct bnx2x_queue_state_params q_params = {0}; int rc, tx_index; - DP(BNX2X_MSG_SP, "stopping queue %d cid %d", index, fp->cid); + DP(BNX2X_MSG_SP, "stopping queue %d cid %d\n", index, fp->cid); q_params.q_obj = &fp->q_obj; /* We want to wait for completion in this context */ @@ -7334,7 +7334,7 @@ static int bnx2x_stop_queue(struct bnx2x *bp, int index) /* ascertain this is a normal queue*/ txdata = &fp->txdata[tx_index]; - DP(BNX2X_MSG_SP, "stopping tx-only queue %d", + DP(BNX2X_MSG_SP, "stopping tx-only queue %d\n", txdata->txq_index); /* send halt terminate on tx-only connection */ @@ -10704,7 +10704,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, return rc; } - DP(NETIF_MSG_DRV, "max_non_def_sbs %d", max_non_def_sbs); + DP(NETIF_MSG_DRV, "max_non_def_sbs %d\n", max_non_def_sbs); rc = bnx2x_init_bp(bp); if (rc) @@ -10759,15 +10759,14 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed); - netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx," - " IRQ %d, ", board_info[ent->driver_data].name, - (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4), - pcie_width, - ((!CHIP_IS_E2(bp) && pcie_speed == 2) || - (CHIP_IS_E2(bp) && pcie_speed == 1)) ? - "5GHz (Gen2)" : "2.5GHz", - dev->base_addr, bp->pdev->irq); - pr_cont("node addr %pM\n", dev->dev_addr); + netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n", + board_info[ent->driver_data].name, + (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4), + pcie_width, + ((!CHIP_IS_E2(bp) && pcie_speed == 2) || + (CHIP_IS_E2(bp) && pcie_speed == 1)) ? + "5GHz (Gen2)" : "2.5GHz", + dev->base_addr, bp->pdev->irq, dev->dev_addr); return 0; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index b4d9c16ff152..1f88c1913bb6 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -3045,8 +3045,8 @@ static int bnx2x_mcast_setup_e1h(struct bnx2x *bp, break; case BNX2X_MCAST_CMD_DEL: - DP(BNX2X_MSG_SP, "Invalidating multicast " - "MACs configuration\n"); + DP(BNX2X_MSG_SP, + "Invalidating multicast MACs configuration\n"); /* clear the registry */ memset(o->registry.aprox_match.vec, 0, @@ -4239,7 +4239,7 @@ static int bnx2x_queue_comp_cmd(struct bnx2x *bp, o->cids[BNX2X_PRIMARY_CID_INDEX], o->next_state); if (o->next_tx_only) /* print num tx-only if any exist */ - DP(BNX2X_MSG_SP, "primary cid %d: num tx-only cons %d", + DP(BNX2X_MSG_SP, "primary cid %d: num tx-only cons %d\n", o->cids[BNX2X_PRIMARY_CID_INDEX], o->next_tx_only); o->state = o->next_state; @@ -4301,7 +4301,7 @@ static void bnx2x_q_fill_init_general_data(struct bnx2x *bp, test_bit(BNX2X_Q_FLG_FCOE, flags) ? LLFC_TRAFFIC_TYPE_FCOE : LLFC_TRAFFIC_TYPE_NW; - DP(BNX2X_MSG_SP, "flags: active %d, cos %d, stats en %d", + DP(BNX2X_MSG_SP, "flags: active %d, cos %d, stats en %d\n", gen_data->activate_flg, gen_data->cos, gen_data->statistics_en_flg); } @@ -4454,7 +4454,7 @@ static void bnx2x_q_fill_setup_tx_only(struct bnx2x *bp, &data->tx, &cmd_params->params.tx_only.flags); - DP(BNX2X_MSG_SP, "cid %d, tx bd page lo %x hi %x",cmd_params->q_obj->cids[0], + DP(BNX2X_MSG_SP, "cid %d, tx bd page lo %x hi %x\n",cmd_params->q_obj->cids[0], data->tx.tx_bd_page_base.lo, data->tx.tx_bd_page_base.hi); } @@ -4501,9 +4501,9 @@ static inline int bnx2x_q_init(struct bnx2x *bp, /* Set CDU context validation values */ for (cos = 0; cos < o->max_cos; cos++) { - DP(BNX2X_MSG_SP, "setting context validation. cid %d, cos %d", + DP(BNX2X_MSG_SP, "setting context validation. cid %d, cos %d\n", o->cids[cos], cos); - DP(BNX2X_MSG_SP, "context pointer %p", init->cxts[cos]); + DP(BNX2X_MSG_SP, "context pointer %p\n", init->cxts[cos]); bnx2x_set_ctx_validation(bp, init->cxts[cos], o->cids[cos]); } @@ -4592,7 +4592,7 @@ static inline int bnx2x_q_send_setup_tx_only(struct bnx2x *bp, return -EINVAL; } - DP(BNX2X_MSG_SP, "parameters received: cos: %d sp-id: %d", + DP(BNX2X_MSG_SP, "parameters received: cos: %d sp-id: %d\n", tx_only_params->gen_params.cos, tx_only_params->gen_params.spcl_id); @@ -4603,7 +4603,7 @@ static inline int bnx2x_q_send_setup_tx_only(struct bnx2x *bp, bnx2x_q_fill_setup_tx_only(bp, params, rdata); DP(BNX2X_MSG_SP, "sending tx-only ramrod: cid %d, client-id %d," - "sp-client id %d, cos %d", + "sp-client id %d, cos %d\n", o->cids[cid_index], rdata->general.client_id, rdata->general.sp_client_id, rdata->general.cos); @@ -5160,8 +5160,9 @@ static inline int bnx2x_func_state_change_comp(struct bnx2x *bp, return -EINVAL; } - DP(BNX2X_MSG_SP, "Completing command %d for func %d, setting state to " - "%d\n", cmd, BP_FUNC(bp), o->next_state); + DP(BNX2X_MSG_SP, + "Completing command %d for func %d, setting state to %d\n", + cmd, BP_FUNC(bp), o->next_state); o->state = o->next_state; o->next_state = BNX2X_F_STATE_MAX; -- 2.30.2