From 945fd17ab6bab8a4d05da6c3170519fbcfe62ddb Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 28 Feb 2018 21:14:26 +0100 Subject: [PATCH] x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table The separation of the cpu_entry_area from the fixmap missed the fact that on 32bit non-PAE kernels the cpu_entry_area mapping might not be covered in initial_page_table by the previous synchronizations. This results in suspend/resume failures because 32bit utilizes initial page table for resume. The absence of the cpu_entry_area mapping results in a triple fault, aka. insta reboot. With PAE enabled this works by chance because the PGD entry which covers the fixmap and other parts incindentally provides the cpu_entry_area mapping as well. Synchronize the initial page table after setting up the cpu entry area. Instead of adding yet another copy of the same code, move it to a function and invoke it from the various places. It needs to be investigated if the existing calls in setup_arch() and setup_per_cpu_areas() can be replaced by the later invocation from setup_cpu_entry_areas(), but that's beyond the scope of this fix. Fixes: 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap") Reported-by: Woody Suwalski Signed-off-by: Thomas Gleixner Tested-by: Woody Suwalski Cc: William Grant Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1802282137290.1392@nanos.tec.linutronix.de --- arch/x86/include/asm/pgtable_32.h | 1 + arch/x86/include/asm/pgtable_64.h | 1 + arch/x86/kernel/setup.c | 17 +++++------------ arch/x86/kernel/setup_percpu.c | 17 ++++------------- arch/x86/mm/cpu_entry_area.c | 6 ++++++ arch/x86/mm/init_32.c | 15 +++++++++++++++ 6 files changed, 32 insertions(+), 25 deletions(-) diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h index e55466760ff8..b3ec519e3982 100644 --- a/arch/x86/include/asm/pgtable_32.h +++ b/arch/x86/include/asm/pgtable_32.h @@ -32,6 +32,7 @@ extern pmd_t initial_pg_pmd[]; static inline void pgtable_cache_init(void) { } static inline void check_pgt_cache(void) { } void paging_init(void); +void sync_initial_page_table(void); /* * Define this if things work differently on an i386 and an i486: diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h index 81462e9a34f6..1149d2112b2e 100644 --- a/arch/x86/include/asm/pgtable_64.h +++ b/arch/x86/include/asm/pgtable_64.h @@ -28,6 +28,7 @@ extern pgd_t init_top_pgt[]; #define swapper_pg_dir init_top_pgt extern void paging_init(void); +static inline void sync_initial_page_table(void) { } #define pte_ERROR(e) \ pr_err("%s:%d: bad pte %p(%016lx)\n", \ diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 1ae67e982af7..4c616be28506 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -1204,20 +1204,13 @@ void __init setup_arch(char **cmdline_p) kasan_init(); -#ifdef CONFIG_X86_32 - /* sync back kernel address range */ - clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY, - swapper_pg_dir + KERNEL_PGD_BOUNDARY, - KERNEL_PGD_PTRS); - /* - * sync back low identity map too. It is used for example - * in the 32-bit EFI stub. + * Sync back kernel address range. + * + * FIXME: Can the later sync in setup_cpu_entry_areas() replace + * this call? */ - clone_pgd_range(initial_page_table, - swapper_pg_dir + KERNEL_PGD_BOUNDARY, - min(KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY)); -#endif + sync_initial_page_table(); tboot_probe(); diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 497aa766fab3..ea554f812ee1 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -287,24 +287,15 @@ void __init setup_per_cpu_areas(void) /* Setup cpu initialized, callin, callout masks */ setup_cpu_local_masks(); -#ifdef CONFIG_X86_32 /* * Sync back kernel address range again. We already did this in * setup_arch(), but percpu data also needs to be available in * the smpboot asm. We can't reliably pick up percpu mappings * using vmalloc_fault(), because exception dispatch needs * percpu data. + * + * FIXME: Can the later sync in setup_cpu_entry_areas() replace + * this call? */ - clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY, - swapper_pg_dir + KERNEL_PGD_BOUNDARY, - KERNEL_PGD_PTRS); - - /* - * sync back low identity map too. It is used for example - * in the 32-bit EFI stub. - */ - clone_pgd_range(initial_page_table, - swapper_pg_dir + KERNEL_PGD_BOUNDARY, - min(KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY)); -#endif + sync_initial_page_table(); } diff --git a/arch/x86/mm/cpu_entry_area.c b/arch/x86/mm/cpu_entry_area.c index b9283cc27622..476d810639a8 100644 --- a/arch/x86/mm/cpu_entry_area.c +++ b/arch/x86/mm/cpu_entry_area.c @@ -163,4 +163,10 @@ void __init setup_cpu_entry_areas(void) for_each_possible_cpu(cpu) setup_cpu_entry_area(cpu); + + /* + * This is the last essential update to swapper_pgdir which needs + * to be synchronized to initial_page_table on 32bit. + */ + sync_initial_page_table(); } diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index 79cb066f40c0..396e1f0151ac 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -453,6 +453,21 @@ static inline void permanent_kmaps_init(pgd_t *pgd_base) } #endif /* CONFIG_HIGHMEM */ +void __init sync_initial_page_table(void) +{ + clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY, + swapper_pg_dir + KERNEL_PGD_BOUNDARY, + KERNEL_PGD_PTRS); + + /* + * sync back low identity map too. It is used for example + * in the 32-bit EFI stub. + */ + clone_pgd_range(initial_page_table, + swapper_pg_dir + KERNEL_PGD_BOUNDARY, + min(KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY)); +} + void __init native_pagetable_init(void) { unsigned long pfn, va; -- 2.30.2