From 93fa9d32670f5592c8e56abc9928fc194e1e72fc Mon Sep 17 00:00:00 2001 From: Marcel Apfelbaum Date: Thu, 15 May 2014 12:42:49 -0600 Subject: [PATCH] PCI: shpchp: Check bridge's secondary (not primary) bus speed When a new device is added below a hotplug bridge, the bridge's secondary bus speed and the device's bus speed must match. The shpchp driver previously checked the bridge's *primary* bus speed, not the secondary bus speed. This caused hot-add errors like: shpchp 0000:00:03.0: Speed of bus ff and adapter 0 mismatch Check the secondary bus speed instead. [bhelgaas: changelog] Link: https://bugzilla.kernel.org/show_bug.cgi?id=75251 Fixes: 3749c51ac6c1 ("PCI: Make current and maximum bus speeds part of the PCI core") Signed-off-by: Marcel Apfelbaum Signed-off-by: Bjorn Helgaas Acked-by: Michael S. Tsirkin CC: stable@vger.kernel.org # v2.6.34+ --- drivers/pci/hotplug/shpchp_ctrl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 58499277903a..6efc2ec5e4db 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -282,8 +282,8 @@ static int board_added(struct slot *p_slot) return WRONG_BUS_FREQUENCY; } - bsp = ctrl->pci_dev->bus->cur_bus_speed; - msp = ctrl->pci_dev->bus->max_bus_speed; + bsp = ctrl->pci_dev->subordinate->cur_bus_speed; + msp = ctrl->pci_dev->subordinate->max_bus_speed; /* Check if there are other slots or devices on the same bus */ if (!list_empty(&ctrl->pci_dev->subordinate->devices)) -- 2.30.2