From 93b3334a3514a7f10801103e5da98ce75c9f916e Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Tue, 5 Mar 2024 22:34:58 +0100 Subject: [PATCH] kirkwood: remove 5.15 kernel support Kernel was switched to 6.1. Lets drop 5.15 support. Signed-off-by: Pawel Dembicki --- target/linux/kirkwood/config-5.15 | 293 --------------- .../001-5.18-Add-Ctera-C-200-V1-board.patch | 350 ------------------ ...dts-kirkwood-Add-Zyxel-NSA310S-board.patch | 301 --------------- ...irkwood-Add-Endian-4i-Edge-200-board.patch | 249 ------------- .../kirkwood/patches-5.15/100-ib62x0.patch | 53 --- .../kirkwood/patches-5.15/101-iconnect.patch | 80 ---- .../kirkwood/patches-5.15/102-dockstar.patch | 62 ---- .../patches-5.15/103-iomega-ix2-200.patch | 67 ---- .../patches-5.15/105-linksys-viper-dts.patch | 59 --- .../kirkwood/patches-5.15/106-goflexnet.patch | 53 --- ...-zyxel-nsa3x0-common-nand-partitions.patch | 48 --- .../kirkwood/patches-5.15/107-03-nsa325.patch | 54 --- .../patches-5.15/109-pogoplug_v4.patch | 87 ----- .../kirkwood/patches-5.15/110-pogo_e02.patch | 68 ---- .../kirkwood/patches-5.15/111-l-50.patch | 47 --- .../patches-5.15/112-sheevaplug.patch | 47 --- .../patches-5.15/113-readynas_duo_v2.patch | 76 ---- .../patches-5.15/114-ctera-c-200-v1.patch | 60 --- .../kirkwood/patches-5.15/115-nsa310s.patch | 35 -- .../patches-5.15/116-4i-edge-200.patch | 34 -- .../patches-5.15/117-netgear_stora.patch | 10 - ...able-sata-port-specific-led-triggers.patch | 10 - .../202-linksys-find-active-root.patch | 62 ---- .../patches-5.15/203-blackarmor-nas220.patch | 99 ----- 24 files changed, 2304 deletions(-) delete mode 100644 target/linux/kirkwood/config-5.15 delete mode 100644 target/linux/kirkwood/patches-5.15/001-5.18-Add-Ctera-C-200-V1-board.patch delete mode 100644 target/linux/kirkwood/patches-5.15/002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch delete mode 100644 target/linux/kirkwood/patches-5.15/003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch delete mode 100644 target/linux/kirkwood/patches-5.15/100-ib62x0.patch delete mode 100644 target/linux/kirkwood/patches-5.15/101-iconnect.patch delete mode 100644 target/linux/kirkwood/patches-5.15/102-dockstar.patch delete mode 100644 target/linux/kirkwood/patches-5.15/103-iomega-ix2-200.patch delete mode 100644 target/linux/kirkwood/patches-5.15/105-linksys-viper-dts.patch delete mode 100644 target/linux/kirkwood/patches-5.15/106-goflexnet.patch delete mode 100644 target/linux/kirkwood/patches-5.15/107-01-zyxel-nsa3x0-common-nand-partitions.patch delete mode 100644 target/linux/kirkwood/patches-5.15/107-03-nsa325.patch delete mode 100644 target/linux/kirkwood/patches-5.15/109-pogoplug_v4.patch delete mode 100644 target/linux/kirkwood/patches-5.15/110-pogo_e02.patch delete mode 100644 target/linux/kirkwood/patches-5.15/111-l-50.patch delete mode 100644 target/linux/kirkwood/patches-5.15/112-sheevaplug.patch delete mode 100644 target/linux/kirkwood/patches-5.15/113-readynas_duo_v2.patch delete mode 100644 target/linux/kirkwood/patches-5.15/114-ctera-c-200-v1.patch delete mode 100644 target/linux/kirkwood/patches-5.15/115-nsa310s.patch delete mode 100644 target/linux/kirkwood/patches-5.15/116-4i-edge-200.patch delete mode 100644 target/linux/kirkwood/patches-5.15/117-netgear_stora.patch delete mode 100644 target/linux/kirkwood/patches-5.15/201-enable-sata-port-specific-led-triggers.patch delete mode 100644 target/linux/kirkwood/patches-5.15/202-linksys-find-active-root.patch delete mode 100644 target/linux/kirkwood/patches-5.15/203-blackarmor-nas220.patch diff --git a/target/linux/kirkwood/config-5.15 b/target/linux/kirkwood/config-5.15 deleted file mode 100644 index ce19fce6ee66..000000000000 --- a/target/linux/kirkwood/config-5.15 +++ /dev/null @@ -1,293 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_CPU_AUTO=y -# CONFIG_ARCH_MULTI_V4 is not set -# CONFIG_ARCH_MULTI_V4T is not set -CONFIG_ARCH_MULTI_V4_V5=y -CONFIG_ARCH_MULTI_V5=y -CONFIG_ARCH_MVEBU=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM=y -# CONFIG_ARMADA_37XX_WATCHDOG is not set -# CONFIG_ARMADA_THERMAL is not set -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y -CONFIG_ARM_CRYPTO=y -CONFIG_ARM_HAS_SG_CHAIN=y -# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set -CONFIG_ARM_L1_CACHE_SHIFT=5 -# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set -CONFIG_ARM_PATCH_PHYS_VIRT=y -# CONFIG_ARM_THUMB is not set -CONFIG_ARM_UNWIND=y -CONFIG_ATA=y -CONFIG_ATAGS=y -CONFIG_ATA_LEDS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_MQ_PCI=y -CONFIG_CACHE_FEROCEON_L2=y -# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_FEROCEON=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FEROCEON=y -# CONFIG_CPU_FEROCEON_OLD_ID is not set -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_PABRT_LEGACY=y -CONFIG_CPU_PM=y -CONFIG_CPU_THERMAL=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_FEROCEON=y -CONFIG_CPU_USE_DOMAINS=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_DEV_MARVELL=y -CONFIG_CRYPTO_DEV_MARVELL_CESA=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_LIB_DES=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_ZSTD=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" -CONFIG_DEBUG_MVEBU_UART0_ALTERNATE=y -# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set -CONFIG_DEBUG_UART_8250=y -CONFIG_DEBUG_UART_8250_SHIFT=2 -CONFIG_DEBUG_UART_PHYS=0xf1012000 -CONFIG_DEBUG_UART_VIRT=0xfed12000 -CONFIG_DEBUG_UNCOMPRESS=y -CONFIG_DMA_OPS=y -CONFIG_DMA_REMAP=y -CONFIG_DNOTIFY=y -CONFIG_DTC=y -# CONFIG_EARLY_PRINTK is not set -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FORCE_PCI=y -CONFIG_FWNODE_MDIO=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GLOB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_CDEV=y -CONFIG_GPIO_MVEBU=y -CONFIG_GRO_CELLS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HWMON=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_OMAP=y -CONFIG_HZ_FIXED=0 -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MV64XXX=y -# CONFIG_I2C_PXA is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_KIRKWOOD_CLK=y -CONFIG_KIRKWOOD_THERMAL=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_NETXBIG=y -CONFIG_LEDS_NS2=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MACH_KIRKWOOD=y -CONFIG_MACH_MVEBU_ANY=y -CONFIG_MANGLE_BOOTARGS=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MEMFD_CREATE=y -CONFIG_MIGRATION=y -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MTD_CFI is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -# CONFIG_MTD_NAND_MARVELL is not set -CONFIG_MTD_NAND_ORION=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MV643XX_ETH=y -CONFIG_MVEBU_CLK_COMMON=y -CONFIG_MVEBU_MBUS=y -CONFIG_MVMDIO=y -# CONFIG_MVNETA is not set -# CONFIG_MVPP2 is not set -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_KUSER_HELPERS=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6XXX=y -CONFIG_NET_DSA_TAG_DSA=y -CONFIG_NET_DSA_TAG_DSA_COMMON=y -CONFIG_NET_DSA_TAG_EDSA=y -CONFIG_NET_SELFTESTS=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NLS=y -CONFIG_NVMEM=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_ORION_IRQCHIP=y -CONFIG_ORION_TIMER=y -CONFIG_ORION_WATCHDOG=y -CONFIG_OUTER_CACHE=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCI_BRIDGE_EMUL=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MVEBU=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -# CONFIG_PHY_MVEBU_A3700_UTMI is not set -# CONFIG_PHY_MVEBU_A38X_COMPHY is not set -CONFIG_PHY_MVEBU_SATA=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_KIRKWOOD=y -CONFIG_PINCTRL_MVEBU=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PINCTRL_SX150X=y -CONFIG_PLAT_ORION=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_GPIO=y -CONFIG_POWER_RESET_LINKSTATION=y -CONFIG_POWER_SUPPLY=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_RATIONAL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_MV=y -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_SCSI=y -CONFIG_SCSI_COMMON=y -CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_MCTRL_GPIO=y -# CONFIG_SERIAL_MVEBU_UART is not set -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SGL_ALLOC=y -CONFIG_SG_POOL=y -CONFIG_SOC_BUS=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -# CONFIG_SPI_ARMADA_3700 is not set -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SPI_ORION=y -CONFIG_SPLIT_PTLOCK_CPUS=999999 -CONFIG_SRAM=y -CONFIG_SRAM_EXEC=y -CONFIG_SRCU=y -CONFIG_SWPHY=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TINY_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNWINDER_ARM=y -CONFIG_USB=y -CONFIG_USB_COMMON=y -CONFIG_USB_LED_TRIG=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -# CONFIG_VFP is not set -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_WAN=y -CONFIG_WATCHDOG_CORE=y -CONFIG_XXHASH=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZSTD_COMPRESS=y -CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/kirkwood/patches-5.15/001-5.18-Add-Ctera-C-200-V1-board.patch b/target/linux/kirkwood/patches-5.15/001-5.18-Add-Ctera-C-200-V1-board.patch deleted file mode 100644 index 453915e8cf3f..000000000000 --- a/target/linux/kirkwood/patches-5.15/001-5.18-Add-Ctera-C-200-V1-board.patch +++ /dev/null @@ -1,350 +0,0 @@ -From 5fc74dbdf8f640a7ca7fb92345ac6fbeaa078d65 Mon Sep 17 00:00:00 2001 -From: Pawel Dembicki -Date: Tue, 15 Feb 2022 17:39:22 +0100 -Subject: [PATCH] ARM: dts: kirkwood: Add Ctera C-200 V1 board - -Ctera C200 V1 is kirkwood-based 2-Bay NAS. - -Hardware: - - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz - - Ram: 512MB (4x Nanya NT5TU128M8GE-AC) - - NAND Flash: 256MB (Samsung 216 K9F2G08U0C) - - Lan: 1x GBE (Marvell 88E1116R-NNC1) - - Storage: 2x SATA HDD 3.5" Slot - - USB: 2x USB 2.0 port - - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND) - - LEDs: 13x GPIO controlled - - Buttons: 2x GPIO controlled - -Signed-off-by: Pawel Dembicki -Reviewed-by: Andrew Lunn -Signed-off-by: Gregory CLEMENT ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/kirkwood-c200-v1.dts | 310 +++++++++++++++++++++++++ - 2 files changed, 311 insertions(+) - create mode 100644 arch/arm/boot/dts/kirkwood-c200-v1.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -267,6 +267,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \ - dtb-$(CONFIG_MACH_KIRKWOOD) += \ - kirkwood-b3.dtb \ - kirkwood-blackarmor-nas220.dtb \ -+ kirkwood-c200-v1.dtb \ - kirkwood-cloudbox.dtb \ - kirkwood-d2net.dtb \ - kirkwood-db-88f6281.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/kirkwood-c200-v1.dts -@@ -0,0 +1,310 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later -+/* -+ * Ctera C200 V1 Board Description -+ * Copyright 2021-2022 Pawel Dembicki -+ */ -+ -+/dts-v1/; -+ -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" -+#include -+ -+/ { -+ model = "Ctera C200 V1"; -+ compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ stdout-path = &uart0; -+ }; -+ -+ memory@0 { -+ device_type = "memory"; -+ reg = <0x00000000 0x20000000>; -+ }; -+ -+ keys { -+ compatible = "gpio-keys"; -+ pinctrl-0 = <&pmx_buttons>; -+ pinctrl-names = "default"; -+ -+ power { -+ label = "Power Button"; -+ linux,code = ; -+ gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ reset { -+ label = "Reset Button"; -+ linux,code = ; -+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; -+ }; -+ -+ usb1 { -+ label = "USB1 Button"; -+ linux,code = ; -+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; -+ }; -+ -+ usb2 { -+ label = "USB2 Button"; -+ linux,code = ; -+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ gpio-poweroff { -+ compatible = "gpio-poweroff"; -+ pinctrl-0 = <&pmx_poweroff>; -+ pinctrl-names = "default"; -+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&pmx_leds>; -+ pinctrl-names = "default"; -+ -+ led-0 { -+ function = LED_FUNCTION_DISK; -+ function-enumerator = <2>; -+ color = ; -+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-1 { -+ function = LED_FUNCTION_DISK; -+ function-enumerator = <1>; -+ color = ; -+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-2 { -+ function = LED_FUNCTION_DISK; -+ function-enumerator = <2>; -+ color = ; -+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-3 { -+ function = LED_FUNCTION_DISK; -+ function-enumerator = <1>; -+ color = ; -+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-4 { -+ function = LED_FUNCTION_STATUS; -+ color = ; -+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-5 { -+ function = LED_FUNCTION_STATUS; -+ color = ; -+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-6 { -+ function = LED_FUNCTION_INDICATOR; -+ color = ; -+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-7 { -+ function = LED_FUNCTION_DISK_ERR; -+ color = ; -+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-8 { -+ function = LED_FUNCTION_DISK_ERR; -+ color = ; -+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-9 { -+ function = LED_FUNCTION_USB; -+ function-enumerator = <1>; -+ color = ; -+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-10 { -+ function = LED_FUNCTION_USB; -+ function-enumerator = <1>; -+ color = ; -+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "usbport"; -+ trigger-sources = <&hub_port2>; -+ }; -+ -+ led-11 { -+ function = LED_FUNCTION_USB; -+ function-enumerator = <2>; -+ color = ; -+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; -+ }; -+ -+ led-12 { -+ function = LED_FUNCTION_USB; -+ function-enumerator = <2>; -+ color = ; -+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "usbport"; -+ trigger-sources = <&hub_port1>; -+ }; -+ }; -+}; -+ -+ð0 { -+ status = "okay"; -+}; -+ -+ð0port { -+ phy-handle = <ðphy9>; -+}; -+ -+&i2c0 { -+ status = "okay"; -+ -+ rtc@30 { -+ compatible = "s35390a"; -+ reg = <0x30>; -+ }; -+ -+ lm63@4c { -+ compatible = "national,lm63"; -+ reg = <0x4c>; -+ }; -+}; -+ -+&mdio { -+ status = "okay"; -+ -+ ethphy9: ethernet-phy@9 { -+ reg = <9>; -+ }; -+}; -+ -+&nand { -+ status = "okay"; -+ chip-delay = <40>; -+ -+ partition@0 { -+ label = "uboot"; -+ reg = <0x0000000 0x200000>; -+ }; -+ -+ partition@200000 { -+ label = "certificate"; -+ reg = <0x0200000 0x100000>; -+ }; -+ -+ partition@300000 { -+ label = "preset_cfg"; -+ reg = <0x0300000 0x100000>; -+ }; -+ -+ partition@400000 { -+ label = "dev_params"; -+ reg = <0x0400000 0x100000>; -+ }; -+ -+ partition@500000 { -+ label = "active_bank"; -+ reg = <0x0500000 0x0100000>; -+ }; -+ -+ partition@600000 { -+ label = "magic"; -+ reg = <0x0600000 0x0100000>; -+ }; -+ -+ partition@700000 { -+ label = "bank1"; -+ reg = <0x0700000 0x2800000>; -+ }; -+ -+ partition@2f00000 { -+ label = "bank2"; -+ reg = <0x2f00000 0x2800000>; -+ }; -+ -+ /* 0x5700000-0x5a00000 undefined in vendor firmware */ -+ -+ partition@5a00000 { -+ label = "reserved"; -+ reg = <0x5a00000 0x2000000>; -+ }; -+ -+ partition@7a00000 { -+ label = "rootfs"; -+ reg = <0x7a00000 0x8600000>; -+ }; -+}; -+ -+&pinctrl { -+ /* Buzzer gpios are connected to two pins of buzzer. -+ * This buzzer require a modulated signal from gpio. -+ * Leave it as is due lack of proper driver. -+ */ -+ pmx_buzzer: pmx-buzzer { -+ marvell,pins = "mpp12", "mpp13"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_leds: pmx-leds { -+ marvell,pins = "mpp14", "mpp15", "mpp16", "mpp17", "mpp38", -+ "mpp39", "mpp40", "mpp42", "mpp43", "mpp44", -+ "mpp45", "mpp46", "mpp47"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_buttons: pmx-buttons { -+ marvell,pins = "mpp28", "mpp29", "mpp48", "mpp49"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_poweroff: pmx-poweroff { -+ marvell,pins = "mpp34"; -+ marvell,function = "gpio"; -+ }; -+}; -+ -+&rtc { -+ status = "disabled"; -+}; -+ -+&sata { -+ status = "okay"; -+ nr-ports = <2>; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&usb0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ port@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ #trigger-source-cells = <0>; -+ -+ hub_port1: port@1 { -+ reg = <1>; -+ #trigger-source-cells = <0>; -+ }; -+ -+ hub_port2: port@2 { -+ reg = <2>; -+ #trigger-source-cells = <0>; -+ }; -+ }; -+}; diff --git a/target/linux/kirkwood/patches-5.15/002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch b/target/linux/kirkwood/patches-5.15/002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch deleted file mode 100644 index b745ea104fd5..000000000000 --- a/target/linux/kirkwood/patches-5.15/002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch +++ /dev/null @@ -1,301 +0,0 @@ -From e977a103840c57d72b52cbc8c17f87f86ef9aa8d Mon Sep 17 00:00:00 2001 -From: Pawel Dembicki -Date: Sat, 29 Oct 2022 22:57:38 +0200 -Subject: [PATCH] ARM: dts: kirkwood: Add Zyxel NSA310S board - -Zyxel NSA310S is a NAS based on Marvell kirkwood SoC. - -Specification: - - Processor Marvell 88F6702 1 GHz - - 256MB RAM - - 128MB NAND - - 1x GBE LAN port (PHY: Marvell 88E1318) - - 2x USB 2.0 - - 1x SATA - - 3x button - - 7x leds - - serial on J1 connector (115200 8N1) (GND-NOPIN-RX-TX-VCC) - -Tested-by: Tony Dinh -Signed-off-by: Pawel Dembicki -Acked-by: Adam Baker -Reviewed-by: Andrew Lunn -Signed-off-by: Gregory CLEMENT ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/kirkwood-nsa310s.dts | 259 +++++++++++++++++++++++++ - 2 files changed, 260 insertions(+) - create mode 100644 arch/arm/boot/dts/kirkwood-nsa310s.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -320,6 +320,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ - kirkwood-ns2mini.dtb \ - kirkwood-nsa310.dtb \ - kirkwood-nsa310a.dtb \ -+ kirkwood-nsa310s.dtb \ - kirkwood-nsa320.dtb \ - kirkwood-nsa325.dtb \ - kirkwood-openblocks_a6.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts -@@ -0,0 +1,259 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * ZyXEL NSA310S Board Description -+ * Copyright 2020-2022 Pawel Dembicki -+ * Copyright (c) 2015-2021, Tony Dinh -+ * Copyright (c) 2014, Adam Baker -+ * Based upon the board setup file created by Peter Schildmann -+ */ -+/dts-v1/; -+ -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" -+#include -+ -+/ { -+ model = "ZyXEL NSA310S"; -+ compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood"; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x10000000>; -+ }; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200n8 earlyprintk"; -+ stdout-path = &uart0; -+ }; -+ -+ gpio_poweroff { -+ compatible = "gpio-poweroff"; -+ pinctrl-0 = <&pmx_pwr_off>; -+ pinctrl-names = "default"; -+ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-0 = <&pmx_buttons>; -+ pinctrl-names = "default"; -+ -+ power { -+ label = "Power Button"; -+ linux,code = ; -+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ copy { -+ label = "Copy Button"; -+ linux,code = ; -+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; -+ }; -+ -+ reset { -+ label = "Reset Button"; -+ linux,code = ; -+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&pmx_leds>; -+ pinctrl-names = "default"; -+ -+ led-1 { -+ function = LED_FUNCTION_DISK_ERR; -+ color = ; -+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ led-2 { -+ function = LED_FUNCTION_USB; -+ color = ; -+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "usb-host"; -+ }; -+ -+ led-3 { -+ function = LED_FUNCTION_DISK; -+ color = ; -+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "ata1"; -+ }; -+ -+ led-4 { -+ function = LED_FUNCTION_INDICATOR; -+ color = ; -+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ led-5 { -+ function = LED_FUNCTION_INDICATOR; -+ color = ; -+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ led-6 { -+ function = LED_FUNCTION_STATUS; -+ color = ; -+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ led-7 { -+ function = LED_FUNCTION_STATUS; -+ color = ; -+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ -+ usb0_power: regulator@1 { -+ compatible = "regulator-fixed"; -+ regulator-name = "USB Power"; -+ -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ regulator-boot-on; -+ gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ sata1_power: regulator@2 { -+ compatible = "regulator-fixed"; -+ regulator-name = "SATA1 Power"; -+ -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ regulator-boot-on; -+ gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ thermal-zones { -+ disk-thermal { -+ polling-delay = <20000>; -+ polling-delay-passive = <2000>; -+ -+ thermal-sensors = <&hdd_temp>; -+ -+ trips { -+ disk_alert: disk-alert { -+ temperature = <40000>; -+ hysteresis = <5000>; -+ type = "active"; -+ }; -+ disk_crit: disk-crit { -+ temperature = <60000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+ -+ð0 { -+ status = "okay"; -+ -+ ethernet0-port@0 { -+ phy-handle = <ðphy0>; -+ }; -+}; -+ -+&i2c0 { -+ status = "okay"; -+ -+ rtc@68 { -+ compatible = "htk,ht1382"; -+ reg = <0x68>; -+ }; -+}; -+ -+&mdio { -+ status = "okay"; -+ -+ ethphy0: ethernet-phy@1 { -+ reg = <1>; -+ phy-mode = "rgmii-id"; -+ marvell,reg-init = <0x1 0x16 0x0 0x3>, -+ <0x1 0x10 0x0 0x1017>, -+ <0x1 0x11 0x0 0x4408>, -+ <0x1 0x16 0x0 0x0>; -+ }; -+}; -+ -+&nand { -+ status = "okay"; -+ chip-delay = <35>; -+ -+ partition@0 { -+ label = "uboot"; -+ reg = <0x0000000 0x00c0000>; -+ read-only; -+ }; -+ partition@c0000 { -+ label = "uboot_env"; -+ reg = <0x00c0000 0x0080000>; -+ }; -+ partition@140000 { -+ label = "ubi"; -+ reg = <0x0140000 0x7ec0000>; -+ }; -+}; -+ -+&pciec { -+ status = "okay"; -+}; -+ -+&pcie0 { -+ status = "okay"; -+}; -+ -+&pinctrl { -+ pinctrl-names = "default"; -+ -+ pmx_buttons: pmx-buttons { -+ marvell,pins = "mpp24", "mpp25", "mpp26"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_leds: pmx-leds { -+ marvell,pins = "mpp13", "mpp15", "mpp16", "mpp22", "mpp23", -+ "mpp28", "mpp29"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_power: pmx-power { -+ marvell,pins = "mpp21", "mpp33"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_pwr_off: pmx-pwr-off { -+ marvell,pins = "mpp27"; -+ marvell,function = "gpio"; -+ }; -+}; -+ -+&rtc { -+ status = "disabled"; -+}; -+ -+&sata { -+ status = "okay"; -+ nr-ports = <1>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ hdd_temp: sata-port@0 { -+ reg = <0>; -+ #thermal-sensor-cells = <0>; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; diff --git a/target/linux/kirkwood/patches-5.15/003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch b/target/linux/kirkwood/patches-5.15/003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch deleted file mode 100644 index 4b0f46bb6dd5..000000000000 --- a/target/linux/kirkwood/patches-5.15/003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch +++ /dev/null @@ -1,249 +0,0 @@ -From 5668d088ee4ea05db9daaae0645d1d1f579b20f9 Mon Sep 17 00:00:00 2001 -From: Pawel Dembicki -Date: Mon, 3 Oct 2022 09:34:43 +0200 -Subject: ARM: dts: kirkwood: Add Endian 4i Edge 200 board - -Add Endian 4i Edge 200 is 5-port firewall. -It have also clone: Endian UTM Mini (The same hardware, with added WLAN -card). - -Hardware: - - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz - - Ram: 512MB (4x Nanya NT5TU128M8GE-AC) - - NAND Flash: 512MB (Micron 29F4G08AAC) - - Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2) - - Lan 5: 1x GBE (Marvell 88E1116R-NNC1) - - Storage: MicroSD Slot - - MCPIE: MiniPCIe Slot present [fitted with SparkLan WPEA-110N/E - (Atheros AR9280 chipset) in Endian UTM Mini WLAN only] - - USB: 1x USB 2.0 port - - Console: RJ-45 port - - LEDs: 3x GPIO controlled - -Signed-off-by: Pawel Dembicki -Reviewed-by: Andrew Lunn -Signed-off-by: Gregory CLEMENT ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/kirkwood-4i-edge-200.dts | 205 +++++++++++++++++++++++++++++ - 2 files changed, 206 insertions(+) - create mode 100644 arch/arm/boot/dts/kirkwood-4i-edge-200.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -265,6 +265,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \ - keystone-k2g-evm.dtb \ - keystone-k2g-ice.dtb - dtb-$(CONFIG_MACH_KIRKWOOD) += \ -+ kirkwood-4i-edge-200.dtb \ - kirkwood-b3.dtb \ - kirkwood-blackarmor-nas220.dtb \ - kirkwood-c200-v1.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/kirkwood-4i-edge-200.dts -@@ -0,0 +1,205 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * Endian 4i Edge 200 Board Description -+ * Note: Endian UTM Mini is hardware clone of Endian Edge 200 -+ * Copyright 2021-2022 Pawel Dembicki -+ */ -+ -+/dts-v1/; -+ -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" -+#include -+ -+/ { -+ model = "Endian 4i Edge 200"; -+ compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood"; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x20000000>; -+ }; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200n8"; -+ stdout-path = &uart0; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&pmx_led>; -+ pinctrl-names = "default"; -+ -+ led-1 { -+ function = LED_FUNCTION_SD; -+ color = ; -+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "mmc0"; -+ }; -+ -+ led-2 { -+ function = LED_FUNCTION_STATUS; -+ color = ; -+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ led-3 { -+ function = LED_FUNCTION_STATUS; -+ color = ; -+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+}; -+ -+ð0 { -+ status = "okay"; -+}; -+ -+ð0port { -+ speed = <1000>; -+ duplex = <1>; -+}; -+ -+ð1 { -+ status = "okay"; -+}; -+ -+ð1port { -+ phy-handle = <ðphyb>; -+}; -+ -+&mdio { -+ status = "okay"; -+ -+ ethphyb: ethernet-phy@b { -+ reg = <0x0b>; -+ -+ marvell,reg-init = -+ /* link-activity, bi-color mode 4 */ -+ <3 0x10 0xfff0 0xf>; /* Reg 3,16 <- 0xzzzf */ -+ }; -+ -+ switch0: switch@11 { -+ compatible = "marvell,mv88e6085"; -+ reg = <0x11>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "port1"; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "port2"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "port3"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "port4"; -+ }; -+ -+ port@5 { -+ reg = <5>; -+ phy-mode = "rgmii-id"; -+ ethernet = <ð0port>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&nand { -+ status = "okay"; -+ pinctrl-0 = <&pmx_nand>; -+ pinctrl-names = "default"; -+ -+ partition@0 { -+ label = "u-boot"; -+ reg = <0x00000000 0x000a0000>; -+ read-only; -+ }; -+ -+ partition@a0000 { -+ label = "u-boot-env"; -+ reg = <0x000a0000 0x00060000>; -+ read-only; -+ }; -+ -+ partition@100000 { -+ label = "kernel"; -+ reg = <0x00100000 0x00400000>; -+ }; -+ -+ partition@500000 { -+ label = "ubi"; -+ reg = <0x00500000 0x1fb00000>; -+ }; -+}; -+ -+&pciec { -+ status = "okay"; -+}; -+ -+&pcie0 { -+ status = "okay"; -+}; -+ -+&pinctrl { -+ pinctrl-0 = <&pmx_sysrst>; -+ pinctrl-names = "default"; -+ -+ pmx_sysrst: pmx-sysrst { -+ marvell,pins = "mpp6"; -+ marvell,function = "sysrst"; -+ }; -+ -+ pmx_sdio_cd: pmx-sdio-cd { -+ marvell,pins = "mpp28"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led: pmx-led { -+ marvell,pins = "mpp34", "mpp35", "mpp49"; -+ marvell,function = "gpio"; -+ }; -+}; -+ -+&rtc { -+ status = "okay"; -+}; -+ -+&sata_phy0 { -+ status = "disabled"; -+}; -+ -+&sata_phy1 { -+ status = "disabled"; -+}; -+ -+&sdio { -+ pinctrl-0 = <&pmx_sdio_cd>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ cd-gpios = <&gpio0 28 9>; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&usb0 { -+ status = "okay"; -+}; diff --git a/target/linux/kirkwood/patches-5.15/100-ib62x0.patch b/target/linux/kirkwood/patches-5.15/100-ib62x0.patch deleted file mode 100644 index 0637c24b6318..000000000000 --- a/target/linux/kirkwood/patches-5.15/100-ib62x0.patch +++ /dev/null @@ -1,53 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-ib62x0.dts -+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts -@@ -6,7 +6,14 @@ - - / { - model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; -- compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; -+ compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; -+ -+ aliases { -+ led-boot = &led_green_os; -+ led-failsafe = &led_red_os; -+ led-running = &led_green_os; -+ led-upgrade = &led_red_os; -+ }; - - memory { - device_type = "memory"; -@@ -81,12 +88,12 @@ - &pmx_led_usb_transfer>; - pinctrl-names = "default"; - -- green-os { -+ led_green_os: green-os { - label = "ib62x0:green:os"; - gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; -- default-state = "keep"; -+ default-state = "on"; - }; -- red-os { -+ led_red_os: red-os { - label = "ib62x0:red:os"; - gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; - }; -@@ -118,13 +125,13 @@ - }; - - partition@100000 { -- label = "uImage"; -- reg = <0x0100000 0x600000>; -+ label = "second stage u-boot"; -+ reg = <0x100000 0x200000>; - }; - -- partition@700000 { -- label = "root"; -- reg = <0x0700000 0xf900000>; -+ partition@200000 { -+ label = "ubi"; -+ reg = <0x200000 0xfe00000>; - }; - - }; diff --git a/target/linux/kirkwood/patches-5.15/101-iconnect.patch b/target/linux/kirkwood/patches-5.15/101-iconnect.patch deleted file mode 100644 index 935e2dfcf548..000000000000 --- a/target/linux/kirkwood/patches-5.15/101-iconnect.patch +++ /dev/null @@ -1,80 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-iconnect.dts -+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts -@@ -8,6 +8,13 @@ - model = "Iomega Iconnect"; - compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_power_blue; -+ led-failsafe = &led_power_red; -+ led-running = &led_power_blue; -+ led-upgrade = &led_power_red; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; -@@ -16,8 +23,6 @@ - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; -- linux,initrd-start = <0x4500040>; -- linux,initrd-end = <0x4800000>; - }; - - ocp@f1000000 { -@@ -89,12 +94,12 @@ - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; -- power-blue { -+ led_power_blue: power-blue { - label = "power:blue"; - gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; -- default-state = "keep"; -+ default-state = "on"; - }; -- power-red { -+ led_power_red: power-red { - label = "power:red"; - gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; - }; -@@ -146,28 +151,23 @@ - status = "okay"; - - partition@0 { -- label = "uboot"; -- reg = <0x0000000 0xc0000>; -+ label = "u-boot"; -+ reg = <0x0000000 0xe0000>; - }; - -- partition@a0000 { -- label = "env"; -- reg = <0xa0000 0x20000>; -+ partition@e0000 { -+ label = "u-boot environment"; -+ reg = <0xe0000 0x100000>; - }; - - partition@100000 { -- label = "zImage"; -- reg = <0x100000 0x300000>; -- }; -- -- partition@540000 { -- label = "initrd"; -- reg = <0x540000 0x300000>; -+ label = "second stage u-boot"; -+ reg = <0x100000 0x200000>; - }; - -- partition@980000 { -- label = "boot"; -- reg = <0x980000 0x1f400000>; -+ partition@200000 { -+ label = "ubi"; -+ reg = <0x200000 0x1fe00000>; - }; - }; - diff --git a/target/linux/kirkwood/patches-5.15/102-dockstar.patch b/target/linux/kirkwood/patches-5.15/102-dockstar.patch deleted file mode 100644 index 127f84962c19..000000000000 --- a/target/linux/kirkwood/patches-5.15/102-dockstar.patch +++ /dev/null @@ -1,62 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-dockstar.dts -+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts -@@ -8,6 +8,13 @@ - model = "Seagate FreeAgent Dockstar"; - compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_health; -+ led-failsafe = &led_fault; -+ led-running = &led_health; -+ led-upgrade = &led_fault; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; -@@ -42,12 +49,12 @@ - pinctrl-0 = <&pmx_led_green &pmx_led_orange>; - pinctrl-names = "default"; - -- health { -+ led_health: health { - label = "status:green:health"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; -- default-state = "keep"; -+ default-state = "on"; - }; -- fault { -+ led_fault: fault { - label = "status:orange:fault"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; -@@ -78,18 +85,22 @@ - - partition@0 { - label = "u-boot"; -- reg = <0x0000000 0x100000>; -- read-only; -+ reg = <0x0000000 0xe0000>; -+ }; -+ -+ partition@e0000 { -+ label = "u-boot environment"; -+ reg = <0xe0000 0x100000>; - }; - - partition@100000 { -- label = "uImage"; -- reg = <0x0100000 0x400000>; -+ label = "second stage u-boot"; -+ reg = <0x100000 0x200000>; - }; - -- partition@500000 { -- label = "data"; -- reg = <0x0500000 0xfb00000>; -+ partition@200000 { -+ label = "ubi"; -+ reg = <0x200000 0xfe00000>; - }; - }; - diff --git a/target/linux/kirkwood/patches-5.15/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-5.15/103-iomega-ix2-200.patch deleted file mode 100644 index 9313b4bc3e30..000000000000 --- a/target/linux/kirkwood/patches-5.15/103-iomega-ix2-200.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts -+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts -@@ -8,6 +8,13 @@ - model = "Iomega StorCenter ix2-200"; - compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_power; -+ led-failsafe = &led_health; -+ led-running = &led_power; -+ led-upgrade = &led_health; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; -@@ -127,16 +134,16 @@ - &pmx_led_rebuild &pmx_led_health >; - pinctrl-names = "default"; - -- power_led { -+ led_power: power_led { - label = "status:white:power_led"; - gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; -- default-state = "keep"; -+ default-state = "on"; - }; - rebuild_led { - label = "status:white:rebuild_led"; - gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - }; -- health_led { -+ led_health: health_led { - label = "status:red:health_led"; - gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; - }; -@@ -186,18 +193,18 @@ - }; - - partition@a0000 { -- label = "env"; -+ label = "u-boot environment"; - reg = <0xa0000 0x20000>; - read-only; - }; - - partition@100000 { -- label = "uImage"; -+ label = "kernel"; - reg = <0x100000 0x300000>; - }; - - partition@400000 { -- label = "rootfs"; -+ label = "ubi"; - reg = <0x400000 0x1C00000>; - }; - }; -@@ -211,7 +218,7 @@ - }; - - ð0 { -- status = "okay"; -+ status = "disabled"; - ethernet0-port@0 { - speed = <1000>; - duplex = <1>; diff --git a/target/linux/kirkwood/patches-5.15/105-linksys-viper-dts.patch b/target/linux/kirkwood/patches-5.15/105-linksys-viper-dts.patch deleted file mode 100644 index d56a469d94a2..000000000000 --- a/target/linux/kirkwood/patches-5.15/105-linksys-viper-dts.patch +++ /dev/null @@ -1,59 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts -+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts -@@ -24,6 +24,10 @@ - }; - - aliases { -+ led-boot = &led_white_health; -+ led-failsafe = &led_white_health; -+ led-running = &led_white_health; -+ led-upgrade = &led_white_health; - serial0 = &uart0; - }; - -@@ -56,9 +60,10 @@ - pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >; - pinctrl-names = "default"; - -- white-health { -+ led_white_health: white-health { - label = "viper:white:health"; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; -+ default-state = "on"; - }; - - white-pulse { -@@ -114,23 +119,23 @@ - }; - - partition@200000 { -- label = "kernel"; -- reg = <0x200000 0x2A0000>; -+ label = "kernel1"; -+ reg = <0x200000 0x1A00000>; - }; - -- partition@4a0000 { -- label = "rootfs"; -- reg = <0x4A0000 0x1760000>; -+ partition@500000 { -+ label = "rootfs1"; -+ reg = <0x500000 0x1700000>; - }; - - partition@1c00000 { -- label = "alt_kernel"; -- reg = <0x1C00000 0x2A0000>; -+ label = "kernel2"; -+ reg = <0x1C00000 0x1A00000>; - }; - -- partition@1ea0000 { -- label = "alt_rootfs"; -- reg = <0x1EA0000 0x1760000>; -+ partition@1f00000 { -+ label = "rootfs2"; -+ reg = <0x1F00000 0x1700000>; - }; - - partition@3600000 { diff --git a/target/linux/kirkwood/patches-5.15/106-goflexnet.patch b/target/linux/kirkwood/patches-5.15/106-goflexnet.patch deleted file mode 100644 index 82cf90841e30..000000000000 --- a/target/linux/kirkwood/patches-5.15/106-goflexnet.patch +++ /dev/null @@ -1,53 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-goflexnet.dts -+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts -@@ -8,6 +8,13 @@ - model = "Seagate GoFlex Net"; - compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_health; -+ led-failsafe = &led_fault; -+ led-running = &led_health; -+ led-upgrade = &led_fault; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; -@@ -85,12 +92,12 @@ - >; - pinctrl-names = "default"; - -- health { -+ led_health: health { - label = "status:green:health"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; -- default-state = "keep"; -+ default-state = "on"; - }; -- fault { -+ led_fault: fault { - label = "status:orange:fault"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; -@@ -159,18 +166,8 @@ - }; - - partition@100000 { -- label = "uImage"; -- reg = <0x0100000 0x400000>; -- }; -- -- partition@500000 { -- label = "pogoplug"; -- reg = <0x0500000 0x2000000>; -- }; -- -- partition@2500000 { -- label = "root"; -- reg = <0x02500000 0xd800000>; -+ label = "ubi"; -+ reg = <0x0100000 0x0ff00000>; - }; - }; - diff --git a/target/linux/kirkwood/patches-5.15/107-01-zyxel-nsa3x0-common-nand-partitions.patch b/target/linux/kirkwood/patches-5.15/107-01-zyxel-nsa3x0-common-nand-partitions.patch deleted file mode 100644 index df654033fd8c..000000000000 --- a/target/linux/kirkwood/patches-5.15/107-01-zyxel-nsa3x0-common-nand-partitions.patch +++ /dev/null @@ -1,48 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi -+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi -@@ -112,40 +112,16 @@ - - partition@0 { - label = "uboot"; -- reg = <0x0000000 0x0100000>; -+ reg = <0x0000000 0x00c0000>; - read-only; - }; - partition@100000 { - label = "uboot_env"; -- reg = <0x0100000 0x0080000>; -+ reg = <0x00c0000 0x0080000>; - }; -- partition@180000 { -- label = "key_store"; -- reg = <0x0180000 0x0080000>; -- }; -- partition@200000 { -- label = "info"; -- reg = <0x0200000 0x0080000>; -- }; -- partition@280000 { -- label = "etc"; -- reg = <0x0280000 0x0a00000>; -- }; -- partition@c80000 { -- label = "kernel_1"; -- reg = <0x0c80000 0x0a00000>; -- }; -- partition@1680000 { -- label = "rootfs1"; -- reg = <0x1680000 0x2fc0000>; -- }; -- partition@4640000 { -- label = "kernel_2"; -- reg = <0x4640000 0x0a00000>; -- }; -- partition@5040000 { -- label = "rootfs2"; -- reg = <0x5040000 0x2fc0000>; -+ partition@140000 { -+ label = "ubi"; -+ reg = <0x0140000 0x7ec0000>; - }; - }; - diff --git a/target/linux/kirkwood/patches-5.15/107-03-nsa325.patch b/target/linux/kirkwood/patches-5.15/107-03-nsa325.patch deleted file mode 100644 index 374c0895a99e..000000000000 --- a/target/linux/kirkwood/patches-5.15/107-03-nsa325.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-nsa325.dts -+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts -@@ -15,6 +15,13 @@ - model = "ZyXEL NSA325"; - compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_green_sys; -+ led-failsafe = &led_orange_sys; -+ led-running = &led_green_sys; -+ led-upgrade = &led_orange_sys; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; -@@ -162,17 +169,19 @@ - &pmx_led_hdd1_green &pmx_led_hdd1_red>; - pinctrl-names = "default"; - -- green-sys { -+ led_green_sys: green-sys { - label = "nsa325:green:sys"; - gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; -+ default-state = "on"; - }; -- orange-sys { -+ led_orange_sys: orange-sys { - label = "nsa325:orange:sys"; - gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - green-hdd1 { - label = "nsa325:green:hdd1"; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "ata1"; - }; - red-hdd1 { - label = "nsa325:red:hdd1"; -@@ -181,6 +190,7 @@ - green-hdd2 { - label = "nsa325:green:hdd2"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "ata2"; - }; - red-hdd2 { - label = "nsa325:red:hdd2"; -@@ -189,6 +199,7 @@ - green-usb { - label = "nsa325:green:usb"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "usb-host"; - }; - green-copy { - label = "nsa325:green:copy"; diff --git a/target/linux/kirkwood/patches-5.15/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-5.15/109-pogoplug_v4.patch deleted file mode 100644 index 4273eb9af19e..000000000000 --- a/target/linux/kirkwood/patches-5.15/109-pogoplug_v4.patch +++ /dev/null @@ -1,87 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts -+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts -@@ -18,12 +18,20 @@ - compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192", - "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_health; -+ led-failsafe = &led_fault; -+ led-running = &led_health; -+ led-upgrade = &led_fault; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x08000000>; - }; - - chosen { -+ bootargs = "console=ttyS0,115200"; - stdout-path = "uart0:115200n8"; - }; - -@@ -37,8 +45,8 @@ - eject { - debounce-interval = <50>; - wakeup-source; -- linux,code = ; -- label = "Eject Button"; -+ linux,code = ; -+ label = "Reset"; - gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; - }; - }; -@@ -48,12 +56,12 @@ - pinctrl-0 = <&pmx_led_green &pmx_led_red>; - pinctrl-names = "default"; - -- health { -+ led_health: health { - label = "pogoplugv4:green:health"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; -- fault { -+ led_fault: fault { - label = "pogoplugv4:red:fault"; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; -@@ -137,29 +145,19 @@ - #size-cells = <1>; - - partition@0 { -- label = "u-boot"; -- reg = <0x00000000 0x200000>; -+ label = "uboot"; -+ reg = <0x00000000 0x1c0000>; - read-only; - }; - -- partition@200000 { -- label = "uImage"; -- reg = <0x00200000 0x300000>; -- }; -- -- partition@500000 { -- label = "uImage2"; -- reg = <0x00500000 0x300000>; -- }; -- -- partition@800000 { -- label = "failsafe"; -- reg = <0x00800000 0x800000>; -+ partition@1c0000 { -+ label = "uboot_env"; -+ reg = <0x001c0000 0x40000>; - }; - -- partition@1000000 { -- label = "root"; -- reg = <0x01000000 0x7000000>; -+ partition@200000 { -+ label = "ubi"; -+ reg = <0x00200000 0x7e00000>; - }; - }; - }; diff --git a/target/linux/kirkwood/patches-5.15/110-pogo_e02.patch b/target/linux/kirkwood/patches-5.15/110-pogo_e02.patch deleted file mode 100644 index fc384d3521f9..000000000000 --- a/target/linux/kirkwood/patches-5.15/110-pogo_e02.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts -+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts -@@ -20,6 +20,13 @@ - compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", - "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_health; -+ led-failsafe = &led_fault; -+ led-running = &led_health; -+ led-upgrade = &led_fault; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; -@@ -33,12 +40,12 @@ - gpio-leds { - compatible = "gpio-leds"; - -- health { -+ led_health: health { - label = "pogo_e02:green:health"; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; -- default-state = "keep"; -+ default-state = "on"; - }; -- fault { -+ led_fault: fault { - label = "pogo_e02:orange:fault"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - }; -@@ -95,24 +102,24 @@ - status = "okay"; - - partition@0 { -- label = "u-boot"; -- reg = <0x0000000 0x100000>; -+ label = "uboot"; -+ reg = <0x0 0xe0000>; - read-only; - }; - -- partition@100000 { -- label = "uImage"; -- reg = <0x0100000 0x400000>; -+ partition@e0000 { -+ label = "uboot_env"; -+ reg = <0xe0000 0x20000>; - }; - -- partition@500000 { -- label = "pogoplug"; -- reg = <0x0500000 0x2000000>; -+ partition@100000 { -+ label = "second_stage_uboot"; -+ reg = <0x100000 0x100000>; - }; - -- partition@2500000 { -- label = "root"; -- reg = <0x02500000 0x5b00000>; -+ partition@200000 { -+ label = "ubi"; -+ reg = <0x200000 0x7e00000>; - }; - }; - diff --git a/target/linux/kirkwood/patches-5.15/111-l-50.patch b/target/linux/kirkwood/patches-5.15/111-l-50.patch deleted file mode 100644 index bc933cb610b5..000000000000 --- a/target/linux/kirkwood/patches-5.15/111-l-50.patch +++ /dev/null @@ -1,47 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-l-50.dts -+++ b/arch/arm/boot/dts/kirkwood-l-50.dts -@@ -18,6 +18,13 @@ - reg = <0x00000000 0x20000000>; - }; - -+ aliases { -+ led-boot = &led_status_green; -+ led-failsafe = &led_status_red; -+ led-running = &led_status_green; -+ led-upgrade = &led_status_red; -+ }; -+ - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = &uart0; -@@ -95,12 +102,12 @@ - leds { - compatible = "gpio-leds"; - -- status_green { -+ led_status_green: status_green { - label = "l-50:green:status"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - }; - -- status_red { -+ led_status_red: status_red { - label = "l-50:red:status"; - gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; - }; -@@ -349,13 +356,8 @@ - }; - - partition@100000 { -- label = "kernel-1"; -- reg = <0x00100000 0x00800000>; -- }; -- -- partition@900000 { -- label = "rootfs-1"; -- reg = <0x00900000 0x07100000>; -+ label = "ubi"; -+ reg = <0x00100000 0x07900000>; - }; - - partition@7a00000 { diff --git a/target/linux/kirkwood/patches-5.15/112-sheevaplug.patch b/target/linux/kirkwood/patches-5.15/112-sheevaplug.patch deleted file mode 100644 index d1ff9884a068..000000000000 --- a/target/linux/kirkwood/patches-5.15/112-sheevaplug.patch +++ /dev/null @@ -1,47 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi -+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi -@@ -78,13 +78,8 @@ - }; - - partition@100000 { -- label = "uImage"; -- reg = <0x0100000 0x400000>; -- }; -- -- partition@500000 { -- label = "root"; -- reg = <0x0500000 0x1fb00000>; -+ label = "ubi"; -+ reg = <0x0100000 0x1ff00000>; - }; - }; - ---- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts -+++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts -@@ -13,6 +13,13 @@ - model = "Globalscale Technologies SheevaPlug"; - compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_health; -+ led-failsafe = &led_health; -+ led-running = &led_health; -+ led-upgrade = &led_health; -+ }; -+ - ocp@f1000000 { - mvsdio@90000 { - pinctrl-0 = <&pmx_sdio>; -@@ -28,10 +35,10 @@ - pinctrl-0 = <&pmx_led_blue &pmx_led_red>; - pinctrl-names = "default"; - -- health { -+ led_health: health { - label = "sheevaplug:blue:health"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; -- default-state = "keep"; -+ default-state = "on"; - }; - - misc { diff --git a/target/linux/kirkwood/patches-5.15/113-readynas_duo_v2.patch b/target/linux/kirkwood/patches-5.15/113-readynas_duo_v2.patch deleted file mode 100644 index c6452c55a37c..000000000000 --- a/target/linux/kirkwood/patches-5.15/113-readynas_duo_v2.patch +++ /dev/null @@ -1,76 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts -+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts -@@ -19,6 +19,13 @@ - reg = <0x00000000 0x10000000>; - }; - -+ aliases { -+ led-boot = &led_power; -+ led-failsafe = &led_power; -+ led-running = &led_power; -+ led-upgrade = &led_power; -+ }; -+ - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; -@@ -115,7 +122,7 @@ - &pmx_led_blue_backup >; - pinctrl-names = "default"; - -- power_led { -+ led_power: power_led { - label = "status:blue:power_led"; - gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; - default-state = "keep"; -@@ -129,11 +136,13 @@ - disk1_led { - label = "status:blue:disk1_led"; - gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "ata1"; - }; - - disk2_led { - label = "status:blue:disk2_led"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "ata2"; - }; - - backup_led { -@@ -150,7 +159,13 @@ - - power-button { - label = "Power Button"; -- linux,code = ; -+ /* Power button and INT pin from PHY are both connected -+ * to this GPIO. Every network restart causes PHY restart -+ * and button is pressed. It's difficult to use it as -+ * KEY_POWER without changes in kernel (or netifd) so -+ * the button is configured as regular one. -+ */ -+ linux,code = ; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - -@@ -208,18 +223,13 @@ - }; - - partition@200000 { -- label = "uImage"; -+ label = "kernel"; - reg = <0x0200000 0x600000>; - }; - - partition@800000 { -- label = "minirootfs"; -- reg = <0x0800000 0x1000000>; -- }; -- -- partition@1800000 { -- label = "jffs2"; -- reg = <0x1800000 0x6800000>; -+ label = "ubi"; -+ reg = <0x0800000 0x7800000>; - }; - }; - diff --git a/target/linux/kirkwood/patches-5.15/114-ctera-c-200-v1.patch b/target/linux/kirkwood/patches-5.15/114-ctera-c-200-v1.patch deleted file mode 100644 index aed79d5dd570..000000000000 --- a/target/linux/kirkwood/patches-5.15/114-ctera-c-200-v1.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-c200-v1.dts -+++ b/arch/arm/boot/dts/kirkwood-c200-v1.dts -@@ -14,6 +14,14 @@ - model = "Ctera C200 V1"; - compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - -+ -+ aliases { -+ led-boot = &led_status_green; -+ led-failsafe = &led_status_red; -+ led-running = &led_status_green; -+ led-upgrade = &led_status_red; -+ }; -+ - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &uart0; -@@ -78,6 +86,7 @@ - function-enumerator = <1>; - color = ; - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "ata1"; - }; - - led-2 { -@@ -85,6 +94,7 @@ - function-enumerator = <2>; - color = ; - gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "ata2"; - }; - - led-3 { -@@ -94,13 +104,15 @@ - gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; - }; - -- led-4 { -+ led_status_red: led-4 { -+ label = "red:status"; - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - }; - -- led-5 { -+ led_status_green: led-5 { -+ label = "green:status"; - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; -@@ -240,7 +252,7 @@ - }; - - partition@7a00000 { -- label = "rootfs"; -+ label = "ubi"; - reg = <0x7a00000 0x8600000>; - }; - }; diff --git a/target/linux/kirkwood/patches-5.15/115-nsa310s.patch b/target/linux/kirkwood/patches-5.15/115-nsa310s.patch deleted file mode 100644 index 4c6e08f49cbc..000000000000 --- a/target/linux/kirkwood/patches-5.15/115-nsa310s.patch +++ /dev/null @@ -1,35 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-nsa310s.dts -+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts -@@ -16,6 +16,13 @@ - model = "ZyXEL NSA310S"; - compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_green_sys; -+ led-failsafe = &led_red_sys; -+ led-running = &led_green_sys; -+ led-upgrade = &led_red_sys; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; -@@ -96,14 +103,16 @@ - gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; - }; - -- led-6 { -+ led_green_sys: led-6 { -+ label = "nsa310s:green:sys"; - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - -- led-7 { -+ led_red_sys: led-7 { -+ label = "nsa310s:red:sys"; - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; diff --git a/target/linux/kirkwood/patches-5.15/116-4i-edge-200.patch b/target/linux/kirkwood/patches-5.15/116-4i-edge-200.patch deleted file mode 100644 index ffc46c29dc86..000000000000 --- a/target/linux/kirkwood/patches-5.15/116-4i-edge-200.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-4i-edge-200.dts -+++ b/arch/arm/boot/dts/kirkwood-4i-edge-200.dts -@@ -20,6 +20,13 @@ - reg = <0x00000000 0x20000000>; - }; - -+ aliases { -+ led-boot = &led_status_green; -+ led-failsafe = &led_status_orange; -+ led-running = &led_status_green; -+ led-upgrade = &led_status_orange; -+ }; -+ - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = &uart0; -@@ -37,13 +44,15 @@ - linux,default-trigger = "mmc0"; - }; - -- led-2 { -+ led_status_orange: led-2 { -+ label = "orange:status"; - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - }; - -- led-3 { -+ led_status_green: led-3 { -+ label = "green:status"; - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; diff --git a/target/linux/kirkwood/patches-5.15/117-netgear_stora.patch b/target/linux/kirkwood/patches-5.15/117-netgear_stora.patch deleted file mode 100644 index 3ebef23ac4ee..000000000000 --- a/target/linux/kirkwood/patches-5.15/117-netgear_stora.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -339,6 +339,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ - kirkwood-rs411.dtb \ - kirkwood-sheevaplug.dtb \ - kirkwood-sheevaplug-esata.dtb \ -+ kirkwood-stora.dtb \ - kirkwood-t5325.dtb \ - kirkwood-topkick.dtb \ - kirkwood-ts219-6281.dtb \ diff --git a/target/linux/kirkwood/patches-5.15/201-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-5.15/201-enable-sata-port-specific-led-triggers.patch deleted file mode 100644 index 35db06572715..000000000000 --- a/target/linux/kirkwood/patches-5.15/201-enable-sata-port-specific-led-triggers.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/mach-mvebu/Kconfig -+++ b/arch/arm/mach-mvebu/Kconfig -@@ -116,6 +116,7 @@ config MACH_DOVE - config MACH_KIRKWOOD - bool "Marvell Kirkwood boards" - depends on ARCH_MULTI_V5 -+ select ARCH_WANT_LIBATA_LEDS - select CPU_FEROCEON - select GPIOLIB - select KIRKWOOD_CLK diff --git a/target/linux/kirkwood/patches-5.15/202-linksys-find-active-root.patch b/target/linux/kirkwood/patches-5.15/202-linksys-find-active-root.patch deleted file mode 100644 index 515bb21707e3..000000000000 --- a/target/linux/kirkwood/patches-5.15/202-linksys-find-active-root.patch +++ /dev/null @@ -1,62 +0,0 @@ -The WRT1900AC among other Linksys routers uses a dual-firmware layout. -Dynamically rename the active partition to "ubi". - -Signed-off-by: Imre Kaloz ---- ---- a/drivers/mtd/parsers/ofpart_core.c -+++ b/drivers/mtd/parsers/ofpart_core.c -@@ -38,6 +38,8 @@ static bool node_has_compatible(struct d - return of_get_property(pp, "compatible", NULL); - } - -+static int mangled_rootblock; -+ - static int parse_fixed_partitions(struct mtd_info *master, - const struct mtd_partition **pparts, - struct mtd_part_parser_data *data) -@@ -47,6 +49,7 @@ static int parse_fixed_partitions(struct - struct mtd_partition *parts; - struct device_node *mtd_node; - struct device_node *ofpart_node; -+ const char *owrtpart = "ubi"; - const char *partname; - struct device_node *pp; - int nr_parts, i, ret = 0; -@@ -133,9 +136,15 @@ static int parse_fixed_partitions(struct - parts[i].size = of_read_number(reg + a_cells, s_cells); - parts[i].of_node = pp; - -- partname = of_get_property(pp, "label", &len); -- if (!partname) -- partname = of_get_property(pp, "name", &len); -+ if (mangled_rootblock && (i == mangled_rootblock)) { -+ partname = owrtpart; -+ } else { -+ partname = of_get_property(pp, "label", &len); -+ -+ if (!partname) -+ partname = of_get_property(pp, "name", &len); -+ } -+ - parts[i].name = partname; - - if (of_get_property(pp, "read-only", &len)) -@@ -252,6 +261,18 @@ static int __init ofpart_parser_init(voi - return 0; - } - -+static int __init active_root(char *str) -+{ -+ get_option(&str, &mangled_rootblock); -+ -+ if (!mangled_rootblock) -+ return 1; -+ -+ return 1; -+} -+ -+__setup("mangled_rootblock=", active_root); -+ - static void __exit ofpart_parser_exit(void) - { - deregister_mtd_parser(&ofpart_parser); diff --git a/target/linux/kirkwood/patches-5.15/203-blackarmor-nas220.patch b/target/linux/kirkwood/patches-5.15/203-blackarmor-nas220.patch deleted file mode 100644 index e04a28206a20..000000000000 --- a/target/linux/kirkwood/patches-5.15/203-blackarmor-nas220.patch +++ /dev/null @@ -1,99 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts -+++ b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts -@@ -17,6 +17,13 @@ - compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192", - "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_status_amber; -+ led-failsafe = &led_status_amber; -+ led-running = &led_status_blue; -+ led-upgrade = &led_status_amber; -+ }; -+ - memory { /* 128 MB */ - device_type = "memory"; - reg = <0x00000000 0x8000000>; -@@ -36,14 +43,14 @@ - compatible = "gpio-keys"; - - reset { -- label = "Reset"; -- linux,code = ; -+ label = "Reset Button"; -+ linux,code = ; - gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - -- button { -- label = "Power"; -- linux,code = ; -+ power { -+ label = "Power Button"; -+ linux,code = ; - gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - }; - }; -@@ -51,11 +58,27 @@ - gpio-leds { - compatible = "gpio-leds"; - -- blue-power { -+ led_power_blue: power_blue { - label = "nas220:blue:power"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; -+ -+ disk_blue { -+ label = "nas220:blue:disk"; -+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "disk-activity"; -+ }; -+ -+ led_status_blue: status_blue { -+ label = "nas220:blue:status"; -+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ led_status_amber: status_amber { -+ label = "nas220:amber:status"; -+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; -+ }; - }; - - regulators { -@@ -153,6 +176,33 @@ - - &nand { - status = "okay"; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ -+ partition@0 { -+ label = "uboot"; -+ reg = <0x0 0xa0000>; -+ read-only; -+ }; -+ -+ partition@a0000 { -+ label = "uboot-env"; -+ reg = <0xa0000 0x10000>; -+ read-only; -+ }; -+ -+ partition@b0000 { -+ label = "reserved"; -+ reg = <0xb0000 0x10000>; -+ read-only; -+ }; -+ -+ partition@c0000 { -+ label = "ubi"; -+ reg = <0xc0000 0x1e80000>; -+ }; -+ }; - }; - - &mdio { -- 2.30.2