From 92b3e2e9253a9f4c9224071842fd263c334dece0 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Tue, 3 Apr 2007 23:17:37 +0100 Subject: [PATCH] [PATCH] zd1211rw: Fix E2P_PHY_REG patching Due to conflicting/confusing defines in the vendor driver, we were reading E2P_PHY_REG from the wrong location. CR157 patching was slightly incorrect in that the vendor driver only patches in an 8-bit value, whereas we were patching 24 bits. Additionally, CR157 patching was happening on both zd1211 and zd1211b, but this should only happen on zd1211. Signed-off-by: Daniel Drake Signed-off-by: Ulrich Kunitz Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_chip.c | 11 +++-------- drivers/net/wireless/zd1211rw/zd_chip.h | 2 +- 2 files changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c index 9d299bd18850..87ee3ee020fe 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.c +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -592,16 +592,16 @@ int zd_chip_unlock_phy_regs(struct zd_chip *chip) return r; } -/* CR157 can be optionally patched by the EEPROM */ +/* CR157 can be optionally patched by the EEPROM for original ZD1211 */ static int patch_cr157(struct zd_chip *chip) { int r; - u32 value; + u16 value; if (!chip->patch_cr157) return 0; - r = zd_ioread32_locked(chip, &value, E2P_PHY_REG); + r = zd_ioread16_locked(chip, &value, E2P_PHY_REG); if (r) return r; @@ -791,11 +791,6 @@ static int zd1211b_hw_reset_phy(struct zd_chip *chip) goto out; r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); - if (r) - goto unlock; - - r = patch_cr157(chip); -unlock: t = zd_chip_unlock_phy_regs(chip); if (t && !r) r = t; diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h index ae39c225bc9e..e57ed75d9425 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.h +++ b/drivers/net/wireless/zd1211rw/zd_chip.h @@ -641,8 +641,8 @@ enum { * also only 11 channels. */ #define E2P_ALLOWED_CHANNEL E2P_DATA(0x18) -#define E2P_PHY_REG E2P_DATA(0x1a) #define E2P_DEVICE_VER E2P_DATA(0x20) +#define E2P_PHY_REG E2P_DATA(0x25) #define E2P_36M_CAL_VALUE1 E2P_DATA(0x28) #define E2P_36M_CAL_VALUE2 E2P_DATA(0x2a) #define E2P_36M_CAL_VALUE3 E2P_DATA(0x2c) -- 2.30.2