From 929694d252d21bad0e2b05ba02e616e6795988b2 Mon Sep 17 00:00:00 2001 From: Nicolas Thill Date: Wed, 2 Mar 2005 01:28:40 +0000 Subject: [PATCH] Add hardware details for WRT54G v1.1 SVN-Revision: 300 --- .../hardware/linksys/wrt54g_v11/cpuinfo.txt | 16 ++++ .../linksys/wrt54g_v11/dmesg-2_4_29.txt | 96 +++++++++++++++++++ .../hardware/linksys/wrt54g_v11/ifconfig.txt | 54 +++++++++++ .../docs/hardware/linksys/wrt54g_v11/info.txt | 23 +++++ .../hardware/linksys/wrt54g_v11/lspci-vv.txt | 92 ++++++++++++++++++ .../hardware/linksys/wrt54g_v11/nvram.txt | 88 +++++++++++++++++ .../docs/hardware/linksys/wrt54g_v11/pci.txt | 56 +++++++++++ 7 files changed, 425 insertions(+) create mode 100644 openwrt/docs/hardware/linksys/wrt54g_v11/cpuinfo.txt create mode 100644 openwrt/docs/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt create mode 100644 openwrt/docs/hardware/linksys/wrt54g_v11/ifconfig.txt create mode 100644 openwrt/docs/hardware/linksys/wrt54g_v11/info.txt create mode 100644 openwrt/docs/hardware/linksys/wrt54g_v11/lspci-vv.txt create mode 100644 openwrt/docs/hardware/linksys/wrt54g_v11/nvram.txt create mode 100644 openwrt/docs/hardware/linksys/wrt54g_v11/pci.txt diff --git a/openwrt/docs/hardware/linksys/wrt54g_v11/cpuinfo.txt b/openwrt/docs/hardware/linksys/wrt54g_v11/cpuinfo.txt new file mode 100644 index 0000000000..b3cfcfb0b4 --- /dev/null +++ b/openwrt/docs/hardware/linksys/wrt54g_v11/cpuinfo.txt @@ -0,0 +1,16 @@ +system type : Broadcom BCM947XX +processor : 0 +cpu model : BCM4710 V0.0 +BogoMIPS : 82.94 +wait instruction : no +microsecond timers : yes +tlb_entries : 32 +extra interrupt vector : no +hardware watchpoint : no +VCED exceptions : not available +VCEI exceptions : not available +dcache hits : 2866936757 +dcache misses : 57830034 +icache hits : 1724839356 +icache misses : 431170605 +instructions : 2156850242 diff --git a/openwrt/docs/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt b/openwrt/docs/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt new file mode 100644 index 0000000000..58e5ce54cc --- /dev/null +++ b/openwrt/docs/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt @@ -0,0 +1,96 @@ +CPU revision is: 00024000 +Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. +Primary data cache 4kB, 2-way, linesize 16 bytes. +Linux version 2.4.29 (nthill@mr-grey) (gcc version 3.3.5) #1 Tue Mar 1 19:49:53 CET 2005 +Determined physical RAM map: + memory: 01000000 @ 00000000 (usable) +On node 0 totalpages: 4096 +zone(0): 4096 pages. +zone(1): 0 pages. +zone(2): 0 pages. +Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200 +CPU: BCM4710 rev 0 at 125 MHz +Using 62.400 MHz high precision timer. +!unable to setup serial console! +Calibrating delay loop... 82.94 BogoMIPS +Memory: 14044k/16384k available (1485k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem) +Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) +Inode cache hash table entries: 1024 (order: 1, 8192 bytes) +Mount cache hash table entries: 512 (order: 0, 4096 bytes) +Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) +Page-cache hash table entries: 4096 (order: 2, 16384 bytes) +Checking for 'wait' instruction... unavailable. +POSIX conformance testing by UNIFIX +PCI: Fixing up bus 0 +PCI: Fixing up bridge +PCI: Setting latency timer of device 01:00.0 to 64 +PCI: Fixing up bus 1 +Linux NET4.0 for Linux 2.4 +Based upon Swansea University Computer Society NET3.039 +Initializing RT netlink socket +Starting kswapd +devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) +devfs: boot_options: 0x1 +JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. +Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher +pty: 256 Unix98 ptys configured +Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled +Software Watchdog Timer: 0.05, timer margin: 60 sec +loop: loaded (max 8 devices) +PPP generic driver version 2.4.2 + Amd/Fujitsu Extended Query Table v1.1 at 0x0040 +Physically mapped flash: Swapping erase regions for broken CFI table. +number of CFI chips: 1 +cfi_cmdset_0002: Disabling fast programming due to code brokenness. +Flash device: 0x400000 at 0x1fc00000 +Creating 5 MTD partitions on "Physically mapped flash": +0x00000000-0x00040000 : "pmon" +0x00040000-0x003f0000 : "linux" +0x000edd94-0x001fd000 : "rootfs" +mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only +0x003f0000-0x00400000 : "nvram" +0x00200000-0x003f0000 : "OpenWrt" +sflash: chipcommon not found +Initializing Cryptographic API +NET4: Linux TCP/IP 1.0 for NET4.0 +IP Protocols: ICMP, UDP, TCP, IGMP +IP: routing cache hash table of 512 buckets, 4Kbytes +TCP: Hash tables configured (established 1024 bind 2048) +ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack +ip_tables: (C) 2000-2002 Netfilter core team +NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. +NET4: Ethernet Bridge 008 for NET4.0 +Bridge firewalling registered +802.1Q VLAN Support v1.8 Ben Greear +All bugs added by David S. Miller +VFS: Mounted root (squashfs filesystem) readonly. +Mounted devfs on /dev +Freeing unused kernel memory: 100k freed +Warning: unable to open an initial console. +Algorithmics/MIPS FPU Emulator v1.5 +diag boardtype: 0000041a +using v1 hardware +jffs2.bbc: SIZE compression mode activated. +PCI: Setting latency timer of device 00:02.0 to 64 +5325E phy=FFFFFFFF +eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 +PCI: Setting latency timer of device 00:08.0 to 64 +5325E phy=FFFFFFFF +eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 +PCI: Setting latency timer of device 01:08.0 to 64 +PCI: Enabling device 01:08.0 (0004 -> 0006) +eth2: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0 +device eth0 entered promiscuous mode +vlan2: add 01:00:5e:00:00:01 mcast address to master interface +device eth1 entered promiscuous mode +device eth2 entered promiscuous mode +br0: port 3(eth2) entering learning state +br0: port 2(eth1) entering learning state +br0: port 1(vlan2) entering learning state +br0: port 3(eth2) entering forwarding state +br0: topology change detected, propagating +br0: port 2(eth1) entering forwarding state +br0: topology change detected, propagating +br0: port 1(vlan2) entering forwarding state +br0: topology change detected, propagating +vlan1: add 01:00:5e:00:00:01 mcast address to master interface diff --git a/openwrt/docs/hardware/linksys/wrt54g_v11/ifconfig.txt b/openwrt/docs/hardware/linksys/wrt54g_v11/ifconfig.txt new file mode 100644 index 0000000000..a47a11b706 --- /dev/null +++ b/openwrt/docs/hardware/linksys/wrt54g_v11/ifconfig.txt @@ -0,0 +1,54 @@ +br0 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55 + inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:6022 errors:0 dropped:0 overruns:0 frame:0 + TX packets:5768 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:356276 (347.9 KiB) TX bytes:457411 (446.6 KiB) + +eth0 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55 + UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 + RX packets:6204 errors:0 dropped:0 overruns:0 frame:0 + TX packets:5774 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:1000 + RX bytes:514297 (502.2 KiB) TX bytes:484047 (472.7 KiB) + Interrupt:3 Base address:0x2000 + +eth1 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:56 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0 + TX packets:66 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:1000 + RX bytes:0 (0.0 B) TX bytes:7209 (7.0 KiB) + Interrupt:4 Base address:0x8000 + +eth2 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:57 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:2202 + TX packets:93 errors:36 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:1000 + RX bytes:0 (0.0 B) TX bytes:11951 (11.6 KiB) + Interrupt:6 Base address:0x2000 + +lo Link encap:Local Loopback + inet addr:127.0.0.1 Mask:255.0.0.0 + UP LOOPBACK RUNNING MTU:16436 Metric:1 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0 + TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) + +vlan1 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:181 errors:0 dropped:0 overruns:0 frame:0 + TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:19634 (19.1 KiB) TX bytes:3564 (3.4 KiB) + +vlan2 Link encap:Ethernet HWaddr 00:0C:41:B3:3C:55 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 + RX packets:6023 errors:0 dropped:0 overruns:0 frame:0 + TX packets:5768 errors:0 dropped:0 overruns:0 carrier:0 + collisions:0 txqueuelen:0 + RX bytes:382991 (374.0 KiB) TX bytes:480483 (469.2 KiB) + diff --git a/openwrt/docs/hardware/linksys/wrt54g_v11/info.txt b/openwrt/docs/hardware/linksys/wrt54g_v11/info.txt new file mode 100644 index 0000000000..2bd458d160 --- /dev/null +++ b/openwrt/docs/hardware/linksys/wrt54g_v11/info.txt @@ -0,0 +1,23 @@ +Linksys WRT54G v1.1 + +Online Description from Linksys: +http://www.linksys.com/products/product.asp?grid=33&scid=35&prid=601 + +CPU: BCM4710 at 125 MHz +RAM: 16 MB +Flash: 4 MB (AMD AM29LV320DT 2 M x 16-Bit) +1 Broadcom BCM47xx 10/100 Mbps Ethernet Controller +1 Broadcom BCM4320 802.11 Wireless Controller +1 Infineon-ADMtek ADM6996L 5-ports Ethernet swith +serial port possible (but not used) +JTAG interface available (but not used) + +List of files: +nvram.txt: contents of NVRAM after 'mtd erase' and OpenWRT upgrade +cpuinfo.txt: contents of /proc/cpuinfo (2.4.29) +pci.txt: contents of /proc/pci (2.4.29) +dmesg-2_4_29.txt: dmesg from Kernel 2.4.29 +lspci-vv.txt: output of lspci -vv -P ./proc/bus/pci (deported) + +-- +Nico diff --git a/openwrt/docs/hardware/linksys/wrt54g_v11/lspci-vv.txt b/openwrt/docs/hardware/linksys/wrt54g_v11/lspci-vv.txt new file mode 100644 index 0000000000..d58a02b25f --- /dev/null +++ b/openwrt/docs/hardware/linksys/wrt54g_v11/lspci-vv.txt @@ -0,0 +1,92 @@ +0000:00:00.0 RAM memory: Broadcom Corporation: Unknown device 0803 + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- (32-bit, non-prefetchable) [disabled] [size=128M] + Region 2: Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=128M] + Region 3: Memory at 80000000 (32-bit, non-prefetchable) [disabled] [size=80000000] + Expansion ROM at [disabled] [size=2K] + +0000:00:01.0 Ethernet controller: Broadcom Corporation BCM47xx Sentry5 iLine32 HomePNA 2.0 + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] + +0000:00:02.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller + Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] + +0000:00:03.0 Modem: Broadcom Corporation Sentry5 UART (prog-if 00 [Generic]) + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] + +0000:00:04.0 USB Controller: Broadcom Corporation Sentry5 USB Controller (prog-if 10 [OHCI]) + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] + +0000:00:05.0 PCI bridge: Broadcom Corporation Sentry5 PCI Bridge (prog-if 00 [Normal decode]) + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap+ 66MHz+ UDF+ FastB2B+ ParErr+ DEVSEL=?? >TAbort+ SERR+ [disabled] [size=2K] + BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- + +0000:00:06.0 MIPS: Broadcom Corporation Sentry5 MIPS32 CPU + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] + +0000:00:07.0 FLASH memory: Broadcom Corporation Sentry5 External Interface Core + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] + +0000:00:08.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller + Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] [size=2K] + +0000:01:00.0 Host bridge: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge (rev 01) + Subsystem: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- (32-bit, prefetchable) [size=128M] + +0000:01:08.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) + Subsystem: Tekram Technology Co.,Ltd.: Unknown device 1603 + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-