From 913d8d110078788c14812dce8bb62c37946821d2 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 7 Aug 2010 11:01:35 +0100 Subject: [PATCH] drm/i915: Ensure that while(INREG()) are bounded (v2) Add a new macro, wait_for, to simplify the act of waiting on a register to change state. wait_for() takes three arguments, the condition to inspect on every loop, the maximum amount of time to wait and whether to yield the cpu for a length of time after each check. v2: Upgrade failure messages to DRM_ERROR on the suggestion of Eric Anholt. We do not expect to hit these conditions as they reflect programming errors, so if we do we want to be notified. Signed-off-by: Chris Wilson Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_crt.c | 17 ++++---- drivers/gpu/drm/i915/intel_display.c | 58 +++++++--------------------- drivers/gpu/drm/i915/intel_dp.c | 25 +++++------- drivers/gpu/drm/i915/intel_drv.h | 14 +++++++ drivers/gpu/drm/i915/intel_lvds.c | 12 +++--- 5 files changed, 48 insertions(+), 78 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index cfcf85496e30..c43176d77549 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -185,8 +185,9 @@ static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector) DRM_DEBUG_KMS("pch crt adpa 0x%x", adpa); I915_WRITE(PCH_ADPA, adpa); - while ((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) != 0) - ; + if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0, + 1000, 1)) + DRM_ERROR("timed out waiting for FORCE_TRIGGER"); if (HAS_PCH_CPT(dev)) { I915_WRITE(PCH_ADPA, temp); @@ -237,17 +238,13 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector) hotplug_en |= CRT_HOTPLUG_FORCE_DETECT; for (i = 0; i < tries ; i++) { - unsigned long timeout; /* turn on the FORCE_DETECT */ I915_WRITE(PORT_HOTPLUG_EN, hotplug_en); - timeout = jiffies + msecs_to_jiffies(1000); /* wait for FORCE_DETECT to go off */ - do { - if (!(I915_READ(PORT_HOTPLUG_EN) & - CRT_HOTPLUG_FORCE_DETECT)) - break; - msleep(1); - } while (time_after(timeout, jiffies)); + if (wait_for((I915_READ(PORT_HOTPLUG_EN) & + CRT_HOTPLUG_FORCE_DETECT) == 0, + 1000, 1)) + DRM_ERROR("timed out waiting for FORCE_DETECT to go off"); } stat = I915_READ(PORT_HOTPLUG_STAT); diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 1eae234ff485..0bf683dd512c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1037,7 +1037,6 @@ static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval) void i8xx_disable_fbc(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - unsigned long timeout = jiffies + msecs_to_jiffies(1); u32 fbc_ctl; if (!I915_HAS_FBC(dev)) @@ -1052,12 +1051,9 @@ void i8xx_disable_fbc(struct drm_device *dev) I915_WRITE(FBC_CONTROL, fbc_ctl); /* Wait for compressing bit to clear */ - while (I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) { - if (time_after(jiffies, timeout)) { - DRM_DEBUG_DRIVER("FBC idle timed out\n"); - break; - } - ; /* do nothing */ + if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10, 0)) { + DRM_DEBUG_KMS("FBC idle timed out\n"); + return; } intel_wait_for_vblank(dev); @@ -1943,7 +1939,6 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B; int trans_dpll_sel = (pipe == 0) ? 0 : 1; u32 temp; - int n; u32 pipe_bpc; temp = I915_READ(pipeconf_reg); @@ -2134,9 +2129,8 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) I915_WRITE(transconf_reg, temp | TRANS_ENABLE); I915_READ(transconf_reg); - while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0) - ; - + if (wait_for(I915_READ(transconf_reg) & TRANS_STATE_ENABLE, 10, 0)) + DRM_ERROR("failed to enable transcoder\n"); } intel_crtc_load_lut(crtc); @@ -2167,20 +2161,10 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) temp = I915_READ(pipeconf_reg); if ((temp & PIPEACONF_ENABLE) != 0) { I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE); - I915_READ(pipeconf_reg); - n = 0; + /* wait for cpu pipe off, pipe state */ - while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0) { - n++; - if (n < 60) { - udelay(500); - continue; - } else { - DRM_DEBUG_KMS("pipe %d off delay\n", - pipe); - break; - } - } + if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0, 50, 1)) + DRM_ERROR("failed to turn off cpu pipe\n"); } else DRM_DEBUG_KMS("crtc %d is disabled\n", pipe); @@ -2241,20 +2225,10 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) temp = I915_READ(transconf_reg); if ((temp & TRANS_ENABLE) != 0) { I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE); - I915_READ(transconf_reg); - n = 0; + /* wait for PCH transcoder off, transcoder state */ - while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0) { - n++; - if (n < 60) { - udelay(500); - continue; - } else { - DRM_DEBUG_KMS("transcoder %d off " - "delay\n", pipe); - break; - } - } + if (wait_for((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) == 0, 50, 1)) + DRM_ERROR("failed to disable transcoder\n"); } temp = I915_READ(transconf_reg); @@ -5521,7 +5495,6 @@ void ironlake_enable_drps(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; u32 rgvmodectl = I915_READ(MEMMODECTL); u8 fmax, fmin, fstart, vstart; - int i = 0; /* 100ms RC evaluation intervals */ I915_WRITE(RCUPEI, 100000); @@ -5565,13 +5538,8 @@ void ironlake_enable_drps(struct drm_device *dev) rgvmodectl |= MEMMODE_SWMODE_EN; I915_WRITE(MEMMODECTL, rgvmodectl); - while (I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) { - if (i++ > 100) { - DRM_ERROR("stuck trying to change perf mode\n"); - break; - } - msleep(1); - } + if (wait_for((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 1, 0)) + DRM_ERROR("stuck trying to change perf mode\n"); msleep(1); ironlake_set_drps(dev, fstart); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index cee5d9ceb3b8..c6629bd9430f 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -759,22 +759,18 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, static void ironlake_edp_panel_on (struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - unsigned long timeout = jiffies + msecs_to_jiffies(5000); - u32 pp, pp_status; + u32 pp; - pp_status = I915_READ(PCH_PP_STATUS); - if (pp_status & PP_ON) + if (I915_READ(PCH_PP_STATUS) & PP_ON) return; pp = I915_READ(PCH_PP_CONTROL); pp |= PANEL_UNLOCK_REGS | POWER_TARGET_ON; I915_WRITE(PCH_PP_CONTROL, pp); - do { - pp_status = I915_READ(PCH_PP_STATUS); - } while (((pp_status & PP_ON) == 0) && !time_after(jiffies, timeout)); - if (time_after(jiffies, timeout)) - DRM_DEBUG_KMS("panel on wait timed out: 0x%08x\n", pp_status); + if (wait_for(I915_READ(PCH_PP_STATUS) & PP_ON, 5000, 10)) + DRM_ERROR("panel on wait timed out: 0x%08x\n", + I915_READ(PCH_PP_STATUS)); pp &= ~(PANEL_UNLOCK_REGS | EDP_FORCE_VDD); I915_WRITE(PCH_PP_CONTROL, pp); @@ -783,18 +779,15 @@ static void ironlake_edp_panel_on (struct drm_device *dev) static void ironlake_edp_panel_off (struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - unsigned long timeout = jiffies + msecs_to_jiffies(5000); - u32 pp, pp_status; + u32 pp; pp = I915_READ(PCH_PP_CONTROL); pp &= ~POWER_TARGET_ON; I915_WRITE(PCH_PP_CONTROL, pp); - do { - pp_status = I915_READ(PCH_PP_STATUS); - } while ((pp_status & PP_ON) && !time_after(jiffies, timeout)); - if (time_after(jiffies, timeout)) - DRM_DEBUG_KMS("panel off wait timed out\n"); + if (wait_for((I915_READ(PCH_PP_STATUS) & PP_ON) == 0, 5000, 10)) + DRM_ERROR("panel off wait timed out: 0x%08x\n", + I915_READ(PCH_PP_STATUS)); /* Make sure VDD is enabled so DP AUX will work */ pp |= EDP_FORCE_VDD; diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index c552b06e5d21..2a3eaaf64b24 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -32,6 +32,20 @@ #include "drm_crtc.h" #include "drm_crtc_helper.h" + +#define wait_for(COND, MS, W) ({ \ + unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \ + int ret__ = 0; \ + while (! (COND)) { \ + if (time_after(jiffies, timeout__)) { \ + ret__ = -ETIMEDOUT; \ + break; \ + } \ + if (W) msleep(W); \ + } \ + ret__; \ +}) + /* * Display related stuff */ diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index cb5821eb59b6..b819c1081147 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -96,7 +96,7 @@ static u32 intel_lvds_get_max_backlight(struct drm_device *dev) static void intel_lvds_set_power(struct drm_device *dev, bool on) { struct drm_i915_private *dev_priv = dev->dev_private; - u32 pp_status, ctl_reg, status_reg, lvds_reg; + u32 ctl_reg, status_reg, lvds_reg; if (HAS_PCH_SPLIT(dev)) { ctl_reg = PCH_PP_CONTROL; @@ -114,9 +114,8 @@ static void intel_lvds_set_power(struct drm_device *dev, bool on) I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON); - do { - pp_status = I915_READ(status_reg); - } while ((pp_status & PP_ON) == 0); + if (wait_for(I915_READ(status_reg) & PP_ON, 1000, 0)) + DRM_ERROR("timed out waiting to enable LVDS pipe"); intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle); } else { @@ -124,9 +123,8 @@ static void intel_lvds_set_power(struct drm_device *dev, bool on) I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON); - do { - pp_status = I915_READ(status_reg); - } while (pp_status & PP_ON); + if (wait_for((I915_READ(status_reg) & PP_ON) == 0, 1000, 0)) + DRM_ERROR("timed out waiting for LVDS pipe to turn off"); I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN); POSTING_READ(lvds_reg); -- 2.30.2