From 9137f812e911fc8030e8b954b097e62e29691154 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sat, 12 Sep 2015 11:07:49 +0300 Subject: [PATCH] staging: sm750fb: ddk750_*i2c: shorten lines to under 80 characters Fix some checkpatch warnings about long lines Signed-off-by: Mike Rapoport Signed-off-by: Greg Kroah-Hartman --- drivers/staging/sm750fb/ddk750_hwi2c.c | 19 ++++++++++++++----- drivers/staging/sm750fb/ddk750_hwi2c.h | 3 ++- drivers/staging/sm750fb/ddk750_swi2c.c | 22 ++++++++++++++++------ 3 files changed, 32 insertions(+), 12 deletions(-) diff --git a/drivers/staging/sm750fb/ddk750_hwi2c.c b/drivers/staging/sm750fb/ddk750_hwi2c.c index 34b687b2dc2c..7be2111284f4 100644 --- a/drivers/staging/sm750fb/ddk750_hwi2c.c +++ b/drivers/staging/sm750fb/ddk750_hwi2c.c @@ -63,7 +63,8 @@ static long hw_i2c_wait_tx_done(void) /* Wait until the transfer is completed. */ timeout = HWI2C_WAIT_TIMEOUT; - while ((FIELD_GET(PEEK32(I2C_STATUS), I2C_STATUS, TX) != I2C_STATUS_TX_COMPLETED) && + while ((FIELD_GET(PEEK32(I2C_STATUS), + I2C_STATUS, TX) != I2C_STATUS_TX_COMPLETED) && (timeout != 0)) timeout--; @@ -102,7 +103,10 @@ static unsigned int hw_i2c_write_data( * Only 16 byte can be accessed per i2c start instruction. */ do { - /* Reset I2C by writing 0 to I2C_RESET register to clear the previous status. */ + /* + * Reset I2C by writing 0 to I2C_RESET register to + * clear the previous status. + */ POKE32(I2C_RESET, 0); /* Set the number of bytes to be written */ @@ -117,7 +121,8 @@ static unsigned int hw_i2c_write_data( POKE32(I2C_DATA0 + i, *buf++); /* Start the I2C */ - POKE32(I2C_CTRL, FIELD_SET(PEEK32(I2C_CTRL), I2C_CTRL, CTRL, START)); + POKE32(I2C_CTRL, + FIELD_SET(PEEK32(I2C_CTRL), I2C_CTRL, CTRL, START)); /* Wait until the transfer is completed. */ if (hw_i2c_wait_tx_done() != 0) @@ -165,7 +170,10 @@ static unsigned int hw_i2c_read_data( * Only 16 byte can be accessed per i2c start instruction. */ do { - /* Reset I2C by writing 0 to I2C_RESET register to clear all the status. */ + /* + * Reset I2C by writing 0 to I2C_RESET register to + * clear all the status. + */ POKE32(I2C_RESET, 0); /* Set the number of bytes to be read */ @@ -176,7 +184,8 @@ static unsigned int hw_i2c_read_data( POKE32(I2C_BYTE_COUNT, count); /* Start the I2C */ - POKE32(I2C_CTRL, FIELD_SET(PEEK32(I2C_CTRL), I2C_CTRL, CTRL, START)); + POKE32(I2C_CTRL, + FIELD_SET(PEEK32(I2C_CTRL), I2C_CTRL, CTRL, START)); /* Wait until transaction done. */ if (hw_i2c_wait_tx_done() != 0) diff --git a/drivers/staging/sm750fb/ddk750_hwi2c.h b/drivers/staging/sm750fb/ddk750_hwi2c.h index 2827865ce689..46e22dce2570 100644 --- a/drivers/staging/sm750fb/ddk750_hwi2c.h +++ b/drivers/staging/sm750fb/ddk750_hwi2c.h @@ -6,5 +6,6 @@ int sm750_hw_i2c_init(unsigned char bus_speed_mode); void sm750_hw_i2c_close(void); unsigned char sm750_hw_i2c_read_reg(unsigned char addr, unsigned char reg); -int sm750_hw_i2c_write_reg(unsigned char addr, unsigned char reg, unsigned char data); +int sm750_hw_i2c_write_reg(unsigned char addr, unsigned char reg, + unsigned char data); #endif diff --git a/drivers/staging/sm750fb/ddk750_swi2c.c b/drivers/staging/sm750fb/ddk750_swi2c.c index ddbbeffcef3a..37cdd5b5f19e 100644 --- a/drivers/staging/sm750fb/ddk750_swi2c.c +++ b/drivers/staging/sm750fb/ddk750_swi2c.c @@ -125,7 +125,10 @@ static void sw_i2c_scl(unsigned char value) gpio_dir = PEEK32(sw_i2c_clk_gpio_data_dir_reg); if (value) { /* High */ - /* Set direction as input. This will automatically pull the signal up. */ + /* + * Set direction as input. This will automatically + * pull the signal up. + */ gpio_dir &= ~(1 << sw_i2c_clk_gpio); POKE32(sw_i2c_clk_gpio_data_dir_reg, gpio_dir); } else { /* Low */ @@ -159,7 +162,10 @@ static void sw_i2c_sda(unsigned char value) gpio_dir = PEEK32(sw_i2c_data_gpio_data_dir_reg); if (value) { /* High */ - /* Set direction as input. This will automatically pull the signal up. */ + /* + * Set direction as input. This will automatically + * pull the signal up. + */ gpio_dir &= ~(1 << sw_i2c_data_gpio); POKE32(sw_i2c_data_gpio_data_dir_reg, gpio_dir); } else { /* Low */ @@ -184,10 +190,11 @@ static unsigned char sw_i2c_read_sda(void) { unsigned long gpio_dir; unsigned long gpio_data; + unsigned long dir_mask = 1 << sw_i2c_data_gpio; /* Make sure that the direction is input (High) */ gpio_dir = PEEK32(sw_i2c_data_gpio_data_dir_reg); - if ((gpio_dir & (1 << sw_i2c_data_gpio)) != (~(1 << sw_i2c_data_gpio))) { + if ((gpio_dir & dir_mask) != ~dir_mask) { gpio_dir &= ~(1 << sw_i2c_data_gpio); POKE32(sw_i2c_data_gpio_data_dir_reg, gpio_dir); } @@ -392,7 +399,10 @@ long sm750_sw_i2c_init( { int i; - /* Return 0 if the GPIO pins to be used is out of range. The range is only from [0..63] */ + /* + * Return 0 if the GPIO pins to be used is out of range. The + * range is only from [0..63] + */ if ((clk_gpio > 31) || (data_gpio > 31)) return -1; @@ -417,9 +427,9 @@ long sm750_sw_i2c_init( /* Enable the GPIO pins for the i2c Clock and Data (GPIO MUX) */ POKE32(sw_i2c_clk_gpio_mux_reg, - PEEK32(sw_i2c_clk_gpio_mux_reg) & ~(1 << sw_i2c_clk_gpio)); + PEEK32(sw_i2c_clk_gpio_mux_reg) & ~(1 << sw_i2c_clk_gpio)); POKE32(sw_i2c_data_gpio_mux_reg, - PEEK32(sw_i2c_data_gpio_mux_reg) & ~(1 << sw_i2c_data_gpio)); + PEEK32(sw_i2c_data_gpio_mux_reg) & ~(1 << sw_i2c_data_gpio)); /* Enable GPIO power */ enableGPIO(1); -- 2.30.2