From 91183babea8f36d7bea40ecbc3862913ca0eae65 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 17 Jun 2015 17:44:58 +0200 Subject: [PATCH] sunxi: musb: Use device-model for musb host mode Modify the sunxi musb glue to use the device-model for musb host mode. This allows using musb in host mode together with other host drivers such as ehci / ohci, which is esp. useful on boards which use the musb controller in host-only mode, these boards have e.g. an usb-a receptacle or an usb to sata converter attached to the musb controller. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- arch/arm/Kconfig | 2 +- drivers/usb/musb-new/sunxi.c | 57 ++++++++++++++++++++++++++++++++++++ 2 files changed, 58 insertions(+), 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0e899cd0d9..3355b3bcaa 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -648,7 +648,7 @@ config ARCH_SUNXI select DM_GPIO select DM_ETH select DM_SERIAL - select DM_USB if !USB_MUSB_SUNXI + select DM_USB select OF_CONTROL select OF_SEPARATE select SPL_DISABLE_OF_CONTROL diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c index cbd2954c41..6109011dca 100644 --- a/drivers/usb/musb-new/sunxi.c +++ b/drivers/usb/musb-new/sunxi.c @@ -26,9 +26,12 @@ #include #include #include +#include +#include #include #include "linux-compat.h" #include "musb_core.h" +#include "musb_uboot.h" /****************************************************************************** ****************************************************************************** @@ -293,7 +296,61 @@ static struct musb_hdrc_platform_data musb_plat = { .platform_ops = &sunxi_musb_ops, }; +#ifdef CONFIG_MUSB_HOST +int musb_usb_probe(struct udevice *dev) +{ + struct musb_host_data *host = dev_get_priv(dev); + struct usb_bus_priv *priv = dev_get_uclass_priv(dev); + + priv->desc_before_addr = true; + + if (!host->host) { + host->host = musb_init_controller(&musb_plat, NULL, + (void *)SUNXI_USB0_BASE); + if (!host->host) { + printf("Failed to init the controller\n"); + return -EIO; + } + } + + printf("MUSB OTG in host-mode\n"); + + return musb_lowlevel_init(host); +} + +int musb_usb_remove(struct udevice *dev) +{ + struct musb_host_data *host = dev_get_priv(dev); + + musb_stop(host->host); + + return 0; +} + +U_BOOT_DRIVER(usb_musb) = { + .name = "sunxi-musb", + .id = UCLASS_USB, + .probe = musb_usb_probe, + .remove = musb_usb_remove, + .ops = &musb_usb_ops, + .platdata_auto_alloc_size = sizeof(struct usb_platdata), + .priv_auto_alloc_size = sizeof(struct musb_host_data), +}; +#endif + void sunxi_musb_board_init(void) { +#ifdef CONFIG_MUSB_HOST + struct udevice *dev; + + /* + * Bind the driver directly for now as musb linux kernel support is + * still pending upstream so our dts files do not have the necessary + * nodes yet. TODO: Remove this as soon as the dts nodes are in place + * and bind by compatible instead. + */ + device_bind_driver(dm_root(), "sunxi-musb", "sunxi-musb", &dev); +#else musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE); +#endif } -- 2.30.2