From 90da06692532541a38f9857972e1fd6b1cdfb45a Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 6 Jan 2011 07:02:53 +0000 Subject: [PATCH] e1000e: reduce scope of some variables, remove unnecessary ones Static analysis of the driver code found some variables for which the scope can be reduced, or remove the variable altogether. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/e1000e/ethtool.c | 4 +--- drivers/net/e1000e/ich8lan.c | 3 ++- drivers/net/e1000e/lib.c | 4 ++-- drivers/net/e1000e/netdev.c | 45 ++++++++++++++++++------------------ drivers/net/e1000e/phy.c | 8 +++---- 5 files changed, 31 insertions(+), 33 deletions(-) diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index dfa44de9cf0d..323fd12c306b 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1255,7 +1255,6 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 ctrl_reg = 0; - u32 stat_reg = 0; u16 phy_reg = 0; s32 ret_val = 0; @@ -1363,8 +1362,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) * Set the ILOS bit on the fiber Nic if half duplex link is * detected. */ - stat_reg = er32(STATUS); - if ((stat_reg & E1000_STATUS_FD) == 0) + if ((er32(STATUS) & E1000_STATUS_FD) == 0) ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU); } diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index fb46974cfec1..232b42b7f7ce 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -2104,7 +2104,6 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) { union ich8_hws_flash_status hsfsts; s32 ret_val = -E1000_ERR_NVM; - s32 i = 0; hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); @@ -2140,6 +2139,8 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); ret_val = 0; } else { + s32 i = 0; + /* * Otherwise poll for sometime so the current * cycle has a chance to end before giving up. diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 68aa1749bf66..96921de5df2e 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -1978,15 +1978,15 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) { struct e1000_nvm_info *nvm = &hw->nvm; u32 eecd = er32(EECD); - u16 timeout = 0; u8 spi_stat_reg; if (nvm->type == e1000_nvm_eeprom_spi) { + u16 timeout = NVM_MAX_RETRY_SPI; + /* Clear SK and CS */ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); ew32(EECD, eecd); udelay(1); - timeout = NVM_MAX_RETRY_SPI; /* * Read "Status Register" repeatedly until the LSB is cleared. diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 1c2f33dd0633..5b916b01805f 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2720,7 +2720,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 rctl, rfctl; - u32 psrctl = 0; u32 pages = 0; /* Workaround Si errata on 82579 - configure jumbo frame flow */ @@ -2819,6 +2818,8 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) adapter->rx_ps_pages = 0; if (adapter->rx_ps_pages) { + u32 psrctl = 0; + /* Configure extra packet-split registers */ rfctl = er32(RFCTL); rfctl |= E1000_RFCTL_EXTEN; @@ -3020,7 +3021,6 @@ static void e1000_set_multi(struct net_device *netdev) struct netdev_hw_addr *ha; u8 *mta_list; u32 rctl; - int i; /* Check for Promiscuous and All Multicast modes */ @@ -3043,12 +3043,13 @@ static void e1000_set_multi(struct net_device *netdev) ew32(RCTL, rctl); if (!netdev_mc_empty(netdev)) { + int i = 0; + mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC); if (!mta_list) return; /* prepare a packed array of only addresses. */ - i = 0; netdev_for_each_mc_addr(ha, netdev) memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN); @@ -3999,10 +4000,11 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; struct e1000_phy_regs *phy = &adapter->phy_regs; - int ret_val; if ((er32(STATUS) & E1000_STATUS_LU) && (adapter->hw.phy.media_type == e1000_media_type_copper)) { + int ret_val; + ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr); ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr); ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise); @@ -4148,7 +4150,6 @@ static void e1000_watchdog_task(struct work_struct *work) struct e1000_ring *tx_ring = adapter->tx_ring; struct e1000_hw *hw = &adapter->hw; u32 link, tctl; - int tx_pending = 0; link = e1000e_has_link(adapter); if ((netif_carrier_ok(netdev)) && link) { @@ -4302,21 +4303,18 @@ link_up: e1000e_update_adaptive(&adapter->hw); - if (!netif_carrier_ok(netdev)) { - tx_pending = (e1000_desc_unused(tx_ring) + 1 < - tx_ring->count); - if (tx_pending) { - /* - * We've lost link, so the controller stops DMA, - * but we've got queued Tx work that's never going - * to get done, so reset controller to flush Tx. - * (Do the reset outside of interrupt context). - */ - adapter->tx_timeout_count++; - schedule_work(&adapter->reset_task); - /* return immediately since reset is imminent */ - return; - } + if (!netif_carrier_ok(netdev) && + (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) { + /* + * We've lost link, so the controller stops DMA, + * but we've got queued Tx work that's never going + * to get done, so reset controller to flush Tx. + * (Do the reset outside of interrupt context). + */ + adapter->tx_timeout_count++; + schedule_work(&adapter->reset_task); + /* return immediately since reset is imminent */ + return; } /* Simple mode for Interrupt Throttle Rate (ITR) */ @@ -4387,13 +4385,13 @@ static int e1000_tso(struct e1000_adapter *adapter, u32 cmd_length = 0; u16 ipcse = 0, tucse, mss; u8 ipcss, ipcso, tucss, tucso, hdr_len; - int err; if (!skb_is_gso(skb)) return 0; if (skb_header_cloned(skb)) { - err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + if (err) return err; } @@ -5518,9 +5516,10 @@ static irqreturn_t e1000_intr_msix(int irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); - int vector, msix_irq; if (adapter->msix_entries) { + int vector, msix_irq; + vector = 0; msix_irq = adapter->msix_entries[vector].vector; disable_irq(msix_irq); diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 6bea051b134b..6ae31fcfb629 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -2409,9 +2409,7 @@ static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg) s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) { s32 ret_val; - u32 page_select = 0; u32 page = offset >> IGP_PAGE_SHIFT; - u32 page_shift = 0; ret_val = hw->phy.ops.acquire(hw); if (ret_val) @@ -2427,6 +2425,8 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset); if (offset > MAX_PHY_MULTI_PAGE_REG) { + u32 page_shift, page_select; + /* * Page select is register 31 for phy address 1 and 22 for * phy address 2 and 3. Page select is shifted only for @@ -2468,9 +2468,7 @@ out: s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) { s32 ret_val; - u32 page_select = 0; u32 page = offset >> IGP_PAGE_SHIFT; - u32 page_shift = 0; ret_val = hw->phy.ops.acquire(hw); if (ret_val) @@ -2486,6 +2484,8 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset); if (offset > MAX_PHY_MULTI_PAGE_REG) { + u32 page_shift, page_select; + /* * Page select is register 31 for phy address 1 and 22 for * phy address 2 and 3. Page select is shifted only for -- 2.30.2