From 8f666b07ac53eeedd6c035adf6d4299f9ed0df2d Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Fri, 28 Aug 2009 13:58:24 +0000 Subject: [PATCH] tg3: Move the JUMBO_CAPABLE and SUPPORT_MSI flags This patch moves where the jumbo capable and msi support flags are located. This is prep work for the addition of msix support flags. Signed-off-by: Matt Carlson Signed-off-by: David S. Miller --- drivers/net/tg3.c | 10 +++++----- drivers/net/tg3.h | 4 ++-- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 606703cf9618..5e74a19e7c12 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -92,7 +92,7 @@ /* hardware minimum and maximum for a single frame's data payload */ #define TG3_MIN_MTU 60 #define TG3_MAX_MTU(tp) \ - ((tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) ? 9000 : 1500) + ((tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) ? 9000 : 1500) /* These numbers seem to be hard coded in the NIC firmware somehow. * You can't change the ring sizes, but you can change where you place @@ -1921,7 +1921,7 @@ out: if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) { /* Cannot do read-modify-write on 5401 */ tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20); - } else if (tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) { + } else if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) { u32 phy_reg; /* Set bit 14 with read-modify-write to preserve other bits */ @@ -1933,7 +1933,7 @@ out: /* Set phy register 0x10 bit 0 to high fifo elasticity to support * jumbo frames transmission. */ - if (tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) { + if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) { u32 phy_reg; if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, &phy_reg)) @@ -6975,7 +6975,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) /* Program the jumbo buffer descriptor ring control * blocks on those devices that have them. */ - if ((tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) && + if ((tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) && !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) { /* Setup replenish threshold. */ tw32(RCVBDI_JUMBO_THRESH, tp->rx_jumbo_pending / 8); @@ -12034,7 +12034,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) || (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) - tp->tg3_flags2 |= TG3_FLG2_JUMBO_CAPABLE; + tp->tg3_flags |= TG3_FLAG_JUMBO_CAPABLE; pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE, &pci_state_reg); diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 1c9495df67ce..5efae2c51388 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2601,6 +2601,7 @@ struct tg3 { #define TG3_FLAG_EEPROM_WRITE_PROT 0x00001000 #define TG3_FLAG_NVRAM 0x00002000 #define TG3_FLAG_NVRAM_BUFFERED 0x00004000 +#define TG3_FLAG_SUPPORT_MSI 0x00008000 #define TG3_FLAG_PCIX_MODE 0x00020000 #define TG3_FLAG_PCI_HIGH_SPEED 0x00040000 #define TG3_FLAG_PCI_32BIT 0x00080000 @@ -2613,7 +2614,7 @@ struct tg3 { #define TG3_FLAG_CPMU_PRESENT 0x04000000 #define TG3_FLAG_40BIT_DMA_BUG 0x08000000 #define TG3_FLAG_BROKEN_CHECKSUMS 0x10000000 -#define TG3_FLAG_SUPPORT_MSI 0x20000000 +#define TG3_FLAG_JUMBO_CAPABLE 0x20000000 #define TG3_FLAG_CHIP_RESETTING 0x40000000 #define TG3_FLAG_INIT_COMPLETE 0x80000000 u32 tg3_flags2; @@ -2639,7 +2640,6 @@ struct tg3 { #define TG3_FLG2_5750_PLUS 0x00080000 #define TG3_FLG2_PROTECTED_NVRAM 0x00100000 #define TG3_FLG2_USING_MSI 0x00200000 -#define TG3_FLG2_JUMBO_CAPABLE 0x00400000 #define TG3_FLG2_MII_SERDES 0x00800000 #define TG3_FLG2_ANY_SERDES (TG3_FLG2_PHY_SERDES | \ TG3_FLG2_MII_SERDES) -- 2.30.2