From 8f3f3eb7a264630a73c23cecfa2af2235775e09a Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Wed, 5 Aug 2015 10:45:15 -0700 Subject: [PATCH] staging: comedi: me4000: only enable PLX interrupt if we have and irq Currently me4000_reset() always enables the PLX interrupt. Move the enable of the interrupt into me4000_auto_attach() and only do the enable if we actually have and irq. Make sure the PLX interrupt is disabled in me4000_reset() before we try to request the irq. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/me4000.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c index da0075b926a5..a4c28fa90759 100644 --- a/drivers/staging/comedi/drivers/me4000.c +++ b/drivers/staging/comedi/drivers/me4000.c @@ -412,7 +412,10 @@ static void me4000_reset(struct comedi_device *dev) unsigned int val; int chan; - /* Make a hardware reset */ + /* Disable interrupts on the PLX */ + outl(0, devpriv->plx_regbase + PLX9052_INTCSR); + + /* Software reset the PLX */ val = inl(devpriv->plx_regbase + PLX9052_CNTRL); val |= PLX9052_CNTRL_PCI_RESET; outl(val, devpriv->plx_regbase + PLX9052_CNTRL); @@ -430,11 +433,6 @@ static void me4000_reset(struct comedi_device *dev) for (chan = 0; chan < 4; chan++) outl(val, dev->iobase + ME4000_AO_CTRL_REG(chan)); - /* Enable interrupts on the PLX */ - outl(PLX9052_INTCSR_LI1ENAB | - PLX9052_INTCSR_LI1POL | - PLX9052_INTCSR_PCIENAB, devpriv->plx_regbase + PLX9052_INTCSR); - /* Set the adustment register for AO demux */ outl(ME4000_AO_DEMUX_ADJUST_VALUE, dev->iobase + ME4000_AO_DEMUX_ADJUST_REG); @@ -1181,8 +1179,14 @@ static int me4000_auto_attach(struct comedi_device *dev, if (pcidev->irq > 0) { result = request_irq(pcidev->irq, me4000_ai_isr, IRQF_SHARED, dev->board_name, dev); - if (result == 0) + if (result == 0) { dev->irq = pcidev->irq; + + /* Enable interrupts on the PLX */ + outl(PLX9052_INTCSR_LI1ENAB | PLX9052_INTCSR_LI1POL | + PLX9052_INTCSR_PCIENAB, + devpriv->plx_regbase + PLX9052_INTCSR); + } } result = comedi_alloc_subdevices(dev, 4); -- 2.30.2