From 8ed390ac768606c0072602701c0723debb54282f Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Wed, 15 Nov 2023 00:59:59 +0100 Subject: [PATCH] qualcommax: set correct PHY mode for port 0-4 Port 0-4 have the mode set to SGMII instead of PSGMII. Now that we use the upstream qca807x driver, this conflicts with the qca SSDK driver that expects the mode to be PSGMII as for not integrated driver, it does refer to the real PHY mode. Update the entry for port 0-4 to PSGMII to solve warning from qca SSDK in ipq8074-ess.dtsi. Signed-off-by: Christian Marangi --- .../files/arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi index d3f4211ecf90..a1e2d01e8f75 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi @@ -476,7 +476,7 @@ reg = <0x3a001000 0x200>; qcom,mactype = <0>; local-mac-address = [000000000000]; - phy-mode = "sgmii"; + phy-mode = "psgmii"; status = "disabled"; }; @@ -487,7 +487,7 @@ reg = <0x3a001200 0x200>; qcom,mactype = <0>; local-mac-address = [000000000000]; - phy-mode = "sgmii"; + phy-mode = "psgmii"; status = "disabled"; }; @@ -498,7 +498,7 @@ reg = <0x3a001400 0x200>; qcom,mactype = <0>; local-mac-address = [000000000000]; - phy-mode = "sgmii"; + phy-mode = "psgmii"; status = "disabled"; }; @@ -509,7 +509,7 @@ reg = <0x3a001600 0x200>; qcom,mactype = <0>; local-mac-address = [000000000000]; - phy-mode = "sgmii"; + phy-mode = "psgmii"; status = "disabled"; }; -- 2.30.2