From 8e78bc39a38d2a82818bcae467d3bcbbbe8531f3 Mon Sep 17 00:00:00 2001 From: Ivan Deng Date: Thu, 16 Jan 2025 00:53:36 -0800 Subject: [PATCH] qualcommax: add missing WAN LED support to Spectrum SAX1V1K routers Fixed an issue where both WAN LEDs light up before plugging in the ethernet cable and no blinking regardless of WAN network activity. Updated the LED configuration to reflect proper status: Green indicates 2.5Gb connection speed. Yellow indicates other connection speed and traffic activity. This resolves inconsistent WAN LED behavior on Spectrum SAX1V1K routers. Signed-off-by: Ivan Deng Link: https://github.com/openwrt/openwrt/pull/17623 Signed-off-by: Robert Marko --- .../arm64/boot/dts/qcom/ipq8072-sax1v1k.dts | 21 +++++++++++++++++++ .../ipq807x/base-files/etc/board.d/01_leds | 3 ++- 2 files changed, 23 insertions(+), 1 deletion(-) diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-sax1v1k.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-sax1v1k.dts index fbb652a097..15ca4d8ec4 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-sax1v1k.dts +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-sax1v1k.dts @@ -137,6 +137,27 @@ reg = <28>; reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; reset-deassert-us = <10000>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_WAN; + default-state = "keep"; + active-low; + }; + + led@2 { + reg = <2>; + color = ; + function = LED_FUNCTION_WAN; + default-state = "keep"; + active-low; + }; + }; }; }; diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds index b5c3cbc736..ae941657f9 100644 --- a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds +++ b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds @@ -16,7 +16,8 @@ asus,rt-ax89x) ucidef_set_led_netdev "sfp" "SFP" "white:sfp" "10g-sfp" ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan" ;; -dynalink,dl-wrx36) +dynalink,dl-wrx36|\ +spectrum,sax1v1k) ucidef_set_led_netdev "wan-port-link-green" "WAN-PORT-LINK-GREEN" "90000.mdio-1:1c:green:wan" "wan" "link_2500" ucidef_set_led_netdev "wan-port-link-yellow" "WAN-PORT-LINK-YELLOW" "90000.mdio-1:1c:yellow:wan" "wan" "tx rx link_10 link_100 link_1000" ;; -- 2.30.2