From 8e218fb24faef0bfe95bc91b3c05261e20439527 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 15 Mar 2009 22:17:04 +0200 Subject: [PATCH] ath5k: Convert chip specific calibration data to a generic format * Convert chip specific calibration data to a generic format common for all chips Note: We scale up power to be in 0.25dB units for all chips for compatibility with RF5112 v2: Address Bob's and Jiri's comments Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/eeprom.c | 774 +++++++++++++++++++--------- drivers/net/wireless/ath5k/eeprom.h | 128 +++-- 2 files changed, 629 insertions(+), 273 deletions(-) diff --git a/drivers/net/wireless/ath5k/eeprom.c b/drivers/net/wireless/ath5k/eeprom.c index ac45ca47ca87..c0fb3b09ba45 100644 --- a/drivers/net/wireless/ath5k/eeprom.c +++ b/drivers/net/wireless/ath5k/eeprom.c @@ -1,7 +1,7 @@ /* * Copyright (c) 2004-2008 Reyk Floeter - * Copyright (c) 2006-2008 Nick Kossifidis - * Copyright (c) 2008 Felix Fietkau + * Copyright (c) 2006-2009 Nick Kossifidis + * Copyright (c) 2008-2009 Felix Fietkau * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -98,11 +98,6 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah) int ret; u16 val; - /* Initial TX thermal adjustment values */ - ee->ee_tx_clip = 4; - ee->ee_pwd_84 = ee->ee_pwd_90 = 1; - ee->ee_gain_select = 1; - /* * Read values from EEPROM and store them in the capability structure */ @@ -241,22 +236,22 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); switch(mode) { case AR5K_EEPROM_MODE_11A: - ee->ee_ob[mode][3] = (val >> 5) & 0x7; - ee->ee_db[mode][3] = (val >> 2) & 0x7; - ee->ee_ob[mode][2] = (val << 1) & 0x7; + ee->ee_ob[mode][3] = (val >> 5) & 0x7; + ee->ee_db[mode][3] = (val >> 2) & 0x7; + ee->ee_ob[mode][2] = (val << 1) & 0x7; AR5K_EEPROM_READ(o++, val); - ee->ee_ob[mode][2] |= (val >> 15) & 0x1; - ee->ee_db[mode][2] = (val >> 12) & 0x7; - ee->ee_ob[mode][1] = (val >> 9) & 0x7; - ee->ee_db[mode][1] = (val >> 6) & 0x7; - ee->ee_ob[mode][0] = (val >> 3) & 0x7; - ee->ee_db[mode][0] = val & 0x7; + ee->ee_ob[mode][2] |= (val >> 15) & 0x1; + ee->ee_db[mode][2] = (val >> 12) & 0x7; + ee->ee_ob[mode][1] = (val >> 9) & 0x7; + ee->ee_db[mode][1] = (val >> 6) & 0x7; + ee->ee_ob[mode][0] = (val >> 3) & 0x7; + ee->ee_db[mode][0] = val & 0x7; break; case AR5K_EEPROM_MODE_11G: case AR5K_EEPROM_MODE_11B: - ee->ee_ob[mode][1] = (val >> 4) & 0x7; - ee->ee_db[mode][1] = val & 0x7; + ee->ee_ob[mode][1] = (val >> 4) & 0x7; + ee->ee_db[mode][1] = val & 0x7; break; } @@ -504,35 +499,6 @@ ath5k_eeprom_init_modes(struct ath5k_hw *ah) return 0; } -/* Used to match PCDAC steps with power values on RF5111 chips - * (eeprom versions < 4). For RF5111 we have 10 pre-defined PCDAC - * steps that match with the power values we read from eeprom. On - * older eeprom versions (< 3.2) these steps are equaly spaced at - * 10% of the pcdac curve -until the curve reaches it's maximum- - * (10 steps from 0 to 100%) but on newer eeprom versions (>= 3.2) - * these 10 steps are spaced in a different way. This function returns - * the pcdac steps based on eeprom version and curve min/max so that we - * can have pcdac/pwr points. - */ -static inline void -ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp) -{ - static const u16 intercepts3[] = - { 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 }; - static const u16 intercepts3_2[] = - { 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 }; - const u16 *ip; - int i; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_2) - ip = intercepts3_2; - else - ip = intercepts3; - - for (i = 0; i < ARRAY_SIZE(intercepts3); i++) - *vp++ = (ip[i] * max + (100 - ip[i]) * min) / 100; -} - /* Read the frequency piers for each mode (mostly used on newer eeproms with 0xff * frequency mask) */ static inline int @@ -546,26 +512,25 @@ ath5k_eeprom_read_freq_list(struct ath5k_hw *ah, int *offset, int max, int ret; u16 val; + ee->ee_n_piers[mode] = 0; while(i < max) { AR5K_EEPROM_READ(o++, val); - freq1 = (val >> 8) & 0xff; - freq2 = val & 0xff; - - if (freq1) { - pc[i++].freq = ath5k_eeprom_bin2freq(ee, - freq1, mode); - ee->ee_n_piers[mode]++; - } + freq1 = val & 0xff; + if (!freq1) + break; - if (freq2) { - pc[i++].freq = ath5k_eeprom_bin2freq(ee, - freq2, mode); - ee->ee_n_piers[mode]++; - } + pc[i++].freq = ath5k_eeprom_bin2freq(ee, + freq1, mode); + ee->ee_n_piers[mode]++; - if (!freq1 || !freq2) + freq2 = (val >> 8) & 0xff; + if (!freq2) break; + + pc[i++].freq = ath5k_eeprom_bin2freq(ee, + freq2, mode); + ee->ee_n_piers[mode]++; } /* return new offset */ @@ -652,13 +617,122 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) return 0; } -/* Read power calibration for RF5111 chips +/* + * Read power calibration for RF5111 chips + * * For RF5111 we have an XPD -eXternal Power Detector- curve - * for each calibrated channel. Each curve has PCDAC steps on - * x axis and power on y axis and looks like a logarithmic - * function. To recreate the curve and pass the power values - * on the pcdac table, we read 10 points here and interpolate later. + * for each calibrated channel. Each curve has 0,5dB Power steps + * on x axis and PCDAC steps (offsets) on y axis and looks like an + * exponential function. To recreate the curve we read 11 points + * here and interpolate later. */ + +/* Used to match PCDAC steps with power values on RF5111 chips + * (eeprom versions < 4). For RF5111 we have 11 pre-defined PCDAC + * steps that match with the power values we read from eeprom. On + * older eeprom versions (< 3.2) these steps are equaly spaced at + * 10% of the pcdac curve -until the curve reaches it's maximum- + * (11 steps from 0 to 100%) but on newer eeprom versions (>= 3.2) + * these 11 steps are spaced in a different way. This function returns + * the pcdac steps based on eeprom version and curve min/max so that we + * can have pcdac/pwr points. + */ +static inline void +ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp) +{ + const static u16 intercepts3[] = + { 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 }; + const static u16 intercepts3_2[] = + { 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 }; + const u16 *ip; + int i; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_2) + ip = intercepts3_2; + else + ip = intercepts3; + + for (i = 0; i < ARRAY_SIZE(intercepts3); i++) + vp[i] = (ip[i] * max + (100 - ip[i]) * min) / 100; +} + +/* Convert RF5111 specific data to generic raw data + * used by interpolation code */ +static int +ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode, + struct ath5k_chan_pcal_info *chinfo) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf5111 *pcinfo; + struct ath5k_pdgain_info *pd; + u8 pier, point, idx; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + + /* Fill raw data for each calibration pier */ + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + + pcinfo = &chinfo[pier].rf5111_info; + + /* Allocate pd_curves for this cal pier */ + chinfo[pier].pd_curves = + kcalloc(AR5K_EEPROM_N_PD_CURVES, + sizeof(struct ath5k_pdgain_info), + GFP_KERNEL); + + if (!chinfo[pier].pd_curves) + return -ENOMEM; + + /* Only one curve for RF5111 + * find out which one and place + * in in pd_curves. + * Note: ee_x_gain is reversed here */ + for (idx = 0; idx < AR5K_EEPROM_N_PD_CURVES; idx++) { + + if (!((ee->ee_x_gain[mode] >> idx) & 0x1)) { + pdgain_idx[0] = idx; + break; + } + } + + ee->ee_pd_gains[mode] = 1; + + pd = &chinfo[pier].pd_curves[idx]; + + pd->pd_points = AR5K_EEPROM_N_PWR_POINTS_5111; + + /* Allocate pd points for this curve */ + pd->pd_step = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111, + sizeof(u8), GFP_KERNEL); + if (!pd->pd_step) + return -ENOMEM; + + pd->pd_pwr = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111, + sizeof(s16), GFP_KERNEL); + if (!pd->pd_pwr) + return -ENOMEM; + + /* Fill raw dataset + * (convert power to 0.25dB units + * for RF5112 combatibility) */ + for (point = 0; point < pd->pd_points; point++) { + + /* Absolute values */ + pd->pd_pwr[point] = 2 * pcinfo->pwr[point]; + + /* Already sorted */ + pd->pd_step[point] = pcinfo->pcdac[point]; + } + + /* Set min/max pwr */ + chinfo[pier].min_pwr = pd->pd_pwr[0]; + chinfo[pier].max_pwr = pd->pd_pwr[10]; + + } + + return 0; +} + +/* Parse EEPROM data */ static int ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode) { @@ -747,30 +821,165 @@ ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode) cdata->pcdac_max, cdata->pcdac); } - return 0; + return ath5k_eeprom_convert_pcal_info_5111(ah, mode, pcal); } -/* Read power calibration for RF5112 chips + +/* + * Read power calibration for RF5112 chips + * * For RF5112 we have 4 XPD -eXternal Power Detector- curves * for each calibrated channel on 0, -6, -12 and -18dbm but we only - * use the higher (3) and the lower (0) curves. Each curve has PCDAC - * steps on x axis and power on y axis and looks like a linear - * function. To recreate the curve and pass the power values - * on the pcdac table, we read 4 points for xpd 0 and 3 points - * for xpd 3 here and interpolate later. + * use the higher (3) and the lower (0) curves. Each curve has 0.5dB + * power steps on x axis and PCDAC steps on y axis and looks like a + * linear function. To recreate the curve and pass the power values + * on hw, we read 4 points for xpd 0 (lower gain -> max power) + * and 3 points for xpd 3 (higher gain -> lower power) here and + * interpolate later. * * Note: Many vendors just use xpd 0 so xpd 3 is zeroed. */ + +/* Convert RF5112 specific data to generic raw data + * used by interpolation code */ +static int +ath5k_eeprom_convert_pcal_info_5112(struct ath5k_hw *ah, int mode, + struct ath5k_chan_pcal_info *chinfo) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf5112 *pcinfo; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + unsigned int pier, pdg, point; + + /* Fill raw data for each calibration pier */ + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + + pcinfo = &chinfo[pier].rf5112_info; + + /* Allocate pd_curves for this cal pier */ + chinfo[pier].pd_curves = + kcalloc(AR5K_EEPROM_N_PD_CURVES, + sizeof(struct ath5k_pdgain_info), + GFP_KERNEL); + + if (!chinfo[pier].pd_curves) + return -ENOMEM; + + /* Fill pd_curves */ + for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { + + u8 idx = pdgain_idx[pdg]; + struct ath5k_pdgain_info *pd = + &chinfo[pier].pd_curves[idx]; + + /* Lowest gain curve (max power) */ + if (pdg == 0) { + /* One more point for better accuracy */ + pd->pd_points = AR5K_EEPROM_N_XPD0_POINTS; + + /* Allocate pd points for this curve */ + pd->pd_step = kcalloc(pd->pd_points, + sizeof(u8), GFP_KERNEL); + + if (!pd->pd_step) + return -ENOMEM; + + pd->pd_pwr = kcalloc(pd->pd_points, + sizeof(s16), GFP_KERNEL); + + if (!pd->pd_pwr) + return -ENOMEM; + + + /* Fill raw dataset + * (all power levels are in 0.25dB units) */ + pd->pd_step[0] = pcinfo->pcdac_x0[0]; + pd->pd_pwr[0] = pcinfo->pwr_x0[0]; + + for (point = 1; point < pd->pd_points; + point++) { + /* Absolute values */ + pd->pd_pwr[point] = + pcinfo->pwr_x0[point]; + + /* Deltas */ + pd->pd_step[point] = + pd->pd_step[point - 1] + + pcinfo->pcdac_x0[point]; + } + + /* Set min power for this frequency */ + chinfo[pier].min_pwr = pd->pd_pwr[0]; + + /* Highest gain curve (min power) */ + } else if (pdg == 1) { + + pd->pd_points = AR5K_EEPROM_N_XPD3_POINTS; + + /* Allocate pd points for this curve */ + pd->pd_step = kcalloc(pd->pd_points, + sizeof(u8), GFP_KERNEL); + + if (!pd->pd_step) + return -ENOMEM; + + pd->pd_pwr = kcalloc(pd->pd_points, + sizeof(s16), GFP_KERNEL); + + if (!pd->pd_pwr) + return -ENOMEM; + + /* Fill raw dataset + * (all power levels are in 0.25dB units) */ + for (point = 0; point < pd->pd_points; + point++) { + /* Absolute values */ + pd->pd_pwr[point] = + pcinfo->pwr_x3[point]; + + /* Fixed points */ + pd->pd_step[point] = + pcinfo->pcdac_x3[point]; + } + + /* Since we have a higher gain curve + * override min power */ + chinfo[pier].min_pwr = pd->pd_pwr[0]; + } + } + } + + return 0; +} + +/* Parse EEPROM data */ static int ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; struct ath5k_chan_pcal_info_rf5112 *chan_pcal_info; struct ath5k_chan_pcal_info *gen_chan_info; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; u32 offset; - unsigned int i, c; + u8 i, c; u16 val; int ret; + u8 pd_gains = 0; + + /* Count how many curves we have and + * identify them (which one of the 4 + * available curves we have on each count). + * Curves are stored from lower (x0) to + * higher (x3) gain */ + for (i = 0; i < AR5K_EEPROM_N_PD_CURVES; i++) { + /* ee_x_gain[mode] is x gain mask */ + if ((ee->ee_x_gain[mode] >> i) & 0x1) + pdgain_idx[pd_gains++] = i; + } + ee->ee_pd_gains[mode] = pd_gains; + + if (pd_gains == 0 || pd_gains > 2) + return -EINVAL; switch (mode) { case AR5K_EEPROM_MODE_11A: @@ -808,13 +1017,13 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) for (i = 0; i < ee->ee_n_piers[mode]; i++) { chan_pcal_info = &gen_chan_info[i].rf5112_info; - /* Power values in dBm * 4 + /* Power values in quarter dB * for the lower xpd gain curve * (0 dBm -> higher output power) */ for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) { AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr_x0[c] = (val & 0xff); - chan_pcal_info->pwr_x0[++c] = ((val >> 8) & 0xff); + chan_pcal_info->pwr_x0[c] = (s8) (val & 0xff); + chan_pcal_info->pwr_x0[++c] = (s8) ((val >> 8) & 0xff); } /* PCDAC steps @@ -825,12 +1034,12 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) chan_pcal_info->pcdac_x0[2] = ((val >> 5) & 0x1f); chan_pcal_info->pcdac_x0[3] = ((val >> 10) & 0x1f); - /* Power values in dBm * 4 + /* Power values in quarter dB * for the higher xpd gain curve * (18 dBm -> lower output power) */ AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr_x3[0] = (val & 0xff); - chan_pcal_info->pwr_x3[1] = ((val >> 8) & 0xff); + chan_pcal_info->pwr_x3[0] = (s8) (val & 0xff); + chan_pcal_info->pwr_x3[1] = (s8) ((val >> 8) & 0xff); AR5K_EEPROM_READ(offset++, val); chan_pcal_info->pwr_x3[2] = (val & 0xff); @@ -843,24 +1052,36 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) chan_pcal_info->pcdac_x3[2] = 63; if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3) { - chan_pcal_info->pcdac_x0[0] = ((val >> 8) & 0xff); + chan_pcal_info->pcdac_x0[0] = ((val >> 8) & 0x3f); /* Last xpd0 power level is also channel maximum */ gen_chan_info[i].max_pwr = chan_pcal_info->pwr_x0[3]; } else { chan_pcal_info->pcdac_x0[0] = 1; - gen_chan_info[i].max_pwr = ((val >> 8) & 0xff); + gen_chan_info[i].max_pwr = (s8) ((val >> 8) & 0xff); } - /* Recreate pcdac_x0 table for this channel using pcdac steps */ - chan_pcal_info->pcdac_x0[1] += chan_pcal_info->pcdac_x0[0]; - chan_pcal_info->pcdac_x0[2] += chan_pcal_info->pcdac_x0[1]; - chan_pcal_info->pcdac_x0[3] += chan_pcal_info->pcdac_x0[2]; } - return 0; + return ath5k_eeprom_convert_pcal_info_5112(ah, mode, gen_chan_info); } + +/* + * Read power calibration for RF2413 chips + * + * For RF2413 we have a Power to PDDAC table (Power Detector) + * instead of a PCDAC and 4 pd gain curves for each calibrated channel. + * Each curve has power on x axis in 0.5 db steps and PDDADC steps on y + * axis and looks like an exponential function like the RF5111 curve. + * + * To recreate the curves we read here the points and interpolate + * later. Note that in most cases only 2 (higher and lower) curves are + * used (like RF5112) but vendors have the oportunity to include all + * 4 curves on eeprom. The final curve (higher power) has an extra + * point for better accuracy like RF5112. + */ + /* For RF2413 power calibration data doesn't start on a fixed location and * if a mode is not supported, it's section is missing -not zeroed-. * So we need to calculate the starting offset for each section by using @@ -890,13 +1111,15 @@ ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode) switch(mode) { case AR5K_EEPROM_MODE_11G: if (AR5K_EEPROM_HDR_11B(ee->ee_header)) - offset += ath5k_pdgains_size_2413(ee, AR5K_EEPROM_MODE_11B) + - AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; + offset += ath5k_pdgains_size_2413(ee, + AR5K_EEPROM_MODE_11B) + + AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; /* fall through */ case AR5K_EEPROM_MODE_11B: if (AR5K_EEPROM_HDR_11A(ee->ee_header)) - offset += ath5k_pdgains_size_2413(ee, AR5K_EEPROM_MODE_11A) + - AR5K_EEPROM_N_5GHZ_CHAN / 2; + offset += ath5k_pdgains_size_2413(ee, + AR5K_EEPROM_MODE_11A) + + AR5K_EEPROM_N_5GHZ_CHAN / 2; /* fall through */ case AR5K_EEPROM_MODE_11A: break; @@ -907,37 +1130,118 @@ ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode) return offset; } -/* Read power calibration for RF2413 chips - * For RF2413 we have a PDDAC table (Power Detector) instead - * of a PCDAC and 4 pd gain curves for each calibrated channel. - * Each curve has PDDAC steps on x axis and power on y axis and - * looks like an exponential function. To recreate the curves - * we read here the points and interpolate later. Note that - * in most cases only higher and lower curves are used (like - * RF5112) but vendors have the oportunity to include all 4 - * curves on eeprom. The final curve (higher power) has an extra - * point for better accuracy like RF5112. - */ +/* Convert RF2413 specific data to generic raw data + * used by interpolation code */ +static int +ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode, + struct ath5k_chan_pcal_info *chinfo) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf2413 *pcinfo; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + unsigned int pier, pdg, point; + + /* Fill raw data for each calibration pier */ + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + + pcinfo = &chinfo[pier].rf2413_info; + + /* Allocate pd_curves for this cal pier */ + chinfo[pier].pd_curves = + kcalloc(AR5K_EEPROM_N_PD_CURVES, + sizeof(struct ath5k_pdgain_info), + GFP_KERNEL); + + if (!chinfo[pier].pd_curves) + return -ENOMEM; + + /* Fill pd_curves */ + for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { + + u8 idx = pdgain_idx[pdg]; + struct ath5k_pdgain_info *pd = + &chinfo[pier].pd_curves[idx]; + + /* One more point for the highest power + * curve (lowest gain) */ + if (pdg == ee->ee_pd_gains[mode] - 1) + pd->pd_points = AR5K_EEPROM_N_PD_POINTS; + else + pd->pd_points = AR5K_EEPROM_N_PD_POINTS - 1; + + /* Allocate pd points for this curve */ + pd->pd_step = kcalloc(pd->pd_points, + sizeof(u8), GFP_KERNEL); + + if (!pd->pd_step) + return -ENOMEM; + + pd->pd_pwr = kcalloc(pd->pd_points, + sizeof(s16), GFP_KERNEL); + + if (!pd->pd_pwr) + return -ENOMEM; + + /* Fill raw dataset + * convert all pwr levels to + * quarter dB for RF5112 combatibility */ + pd->pd_step[0] = pcinfo->pddac_i[pdg]; + pd->pd_pwr[0] = 4 * pcinfo->pwr_i[pdg]; + + for (point = 1; point < pd->pd_points; point++) { + + pd->pd_pwr[point] = pd->pd_pwr[point - 1] + + 2 * pcinfo->pwr[pdg][point - 1]; + + pd->pd_step[point] = pd->pd_step[point - 1] + + pcinfo->pddac[pdg][point - 1]; + + } + + /* Highest gain curve -> min power */ + if (pdg == 0) + chinfo[pier].min_pwr = pd->pd_pwr[0]; + + /* Lowest gain curve -> max power */ + if (pdg == ee->ee_pd_gains[mode] - 1) + chinfo[pier].max_pwr = + pd->pd_pwr[pd->pd_points - 1]; + } + } + + return 0; +} + +/* Parse EEPROM data */ static int ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - struct ath5k_chan_pcal_info_rf2413 *chan_pcal_info; - struct ath5k_chan_pcal_info *gen_chan_info; - unsigned int i, c; + struct ath5k_chan_pcal_info_rf2413 *pcinfo; + struct ath5k_chan_pcal_info *chinfo; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; u32 offset; - int ret; + int idx, i, ret; u16 val; u8 pd_gains = 0; - if (ee->ee_x_gain[mode] & 0x1) pd_gains++; - if ((ee->ee_x_gain[mode] >> 1) & 0x1) pd_gains++; - if ((ee->ee_x_gain[mode] >> 2) & 0x1) pd_gains++; - if ((ee->ee_x_gain[mode] >> 3) & 0x1) pd_gains++; + /* Count how many curves we have and + * identify them (which one of the 4 + * available curves we have on each count). + * Curves are stored from higher to + * lower gain so we go backwards */ + for (idx = AR5K_EEPROM_N_PD_CURVES - 1; idx >= 0; idx--) { + /* ee_x_gain[mode] is x gain mask */ + if ((ee->ee_x_gain[mode] >> idx) & 0x1) + pdgain_idx[pd_gains++] = idx; + + } ee->ee_pd_gains[mode] = pd_gains; + if (pd_gains == 0) + return -EINVAL; + offset = ath5k_cal_data_offset_2413(ee, mode); - ee->ee_n_piers[mode] = 0; switch (mode) { case AR5K_EEPROM_MODE_11A: if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) @@ -945,7 +1249,7 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) ath5k_eeprom_init_11a_pcal_freq(ah, offset); offset += AR5K_EEPROM_N_5GHZ_CHAN / 2; - gen_chan_info = ee->ee_pwr_cal_a; + chinfo = ee->ee_pwr_cal_a; break; case AR5K_EEPROM_MODE_11B: if (!AR5K_EEPROM_HDR_11B(ee->ee_header)) @@ -953,7 +1257,7 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) ath5k_eeprom_init_11bg_2413(ah, mode, offset); offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; - gen_chan_info = ee->ee_pwr_cal_b; + chinfo = ee->ee_pwr_cal_b; break; case AR5K_EEPROM_MODE_11G: if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) @@ -961,41 +1265,35 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) ath5k_eeprom_init_11bg_2413(ah, mode, offset); offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; - gen_chan_info = ee->ee_pwr_cal_g; + chinfo = ee->ee_pwr_cal_g; break; default: return -EINVAL; } - if (pd_gains == 0) - return 0; - for (i = 0; i < ee->ee_n_piers[mode]; i++) { - chan_pcal_info = &gen_chan_info[i].rf2413_info; + pcinfo = &chinfo[i].rf2413_info; /* * Read pwr_i, pddac_i and the first * 2 pd points (pwr, pddac) */ AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr_i[0] = val & 0x1f; - chan_pcal_info->pddac_i[0] = (val >> 5) & 0x7f; - chan_pcal_info->pwr[0][0] = - (val >> 12) & 0xf; + pcinfo->pwr_i[0] = val & 0x1f; + pcinfo->pddac_i[0] = (val >> 5) & 0x7f; + pcinfo->pwr[0][0] = (val >> 12) & 0xf; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[0][0] = val & 0x3f; - chan_pcal_info->pwr[0][1] = (val >> 6) & 0xf; - chan_pcal_info->pddac[0][1] = - (val >> 10) & 0x3f; + pcinfo->pddac[0][0] = val & 0x3f; + pcinfo->pwr[0][1] = (val >> 6) & 0xf; + pcinfo->pddac[0][1] = (val >> 10) & 0x3f; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr[0][2] = val & 0xf; - chan_pcal_info->pddac[0][2] = - (val >> 4) & 0x3f; + pcinfo->pwr[0][2] = val & 0xf; + pcinfo->pddac[0][2] = (val >> 4) & 0x3f; - chan_pcal_info->pwr[0][3] = 0; - chan_pcal_info->pddac[0][3] = 0; + pcinfo->pwr[0][3] = 0; + pcinfo->pddac[0][3] = 0; if (pd_gains > 1) { /* @@ -1003,44 +1301,36 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) * so it only has 2 pd points. * Continue wih pd gain 1. */ - chan_pcal_info->pwr_i[1] = (val >> 10) & 0x1f; + pcinfo->pwr_i[1] = (val >> 10) & 0x1f; - chan_pcal_info->pddac_i[1] = (val >> 15) & 0x1; + pcinfo->pddac_i[1] = (val >> 15) & 0x1; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac_i[1] |= (val & 0x3F) << 1; + pcinfo->pddac_i[1] |= (val & 0x3F) << 1; - chan_pcal_info->pwr[1][0] = (val >> 6) & 0xf; - chan_pcal_info->pddac[1][0] = - (val >> 10) & 0x3f; + pcinfo->pwr[1][0] = (val >> 6) & 0xf; + pcinfo->pddac[1][0] = (val >> 10) & 0x3f; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr[1][1] = val & 0xf; - chan_pcal_info->pddac[1][1] = - (val >> 4) & 0x3f; - chan_pcal_info->pwr[1][2] = - (val >> 10) & 0xf; - - chan_pcal_info->pddac[1][2] = - (val >> 14) & 0x3; + pcinfo->pwr[1][1] = val & 0xf; + pcinfo->pddac[1][1] = (val >> 4) & 0x3f; + pcinfo->pwr[1][2] = (val >> 10) & 0xf; + + pcinfo->pddac[1][2] = (val >> 14) & 0x3; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[1][2] |= - (val & 0xF) << 2; + pcinfo->pddac[1][2] |= (val & 0xF) << 2; - chan_pcal_info->pwr[1][3] = 0; - chan_pcal_info->pddac[1][3] = 0; + pcinfo->pwr[1][3] = 0; + pcinfo->pddac[1][3] = 0; } else if (pd_gains == 1) { /* * Pd gain 0 is the last one so * read the extra point. */ - chan_pcal_info->pwr[0][3] = - (val >> 10) & 0xf; + pcinfo->pwr[0][3] = (val >> 10) & 0xf; - chan_pcal_info->pddac[0][3] = - (val >> 14) & 0x3; + pcinfo->pddac[0][3] = (val >> 14) & 0x3; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[0][3] |= - (val & 0xF) << 2; + pcinfo->pddac[0][3] |= (val & 0xF) << 2; } /* @@ -1048,105 +1338,65 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) * as above. */ if (pd_gains > 2) { - chan_pcal_info->pwr_i[2] = (val >> 4) & 0x1f; - chan_pcal_info->pddac_i[2] = (val >> 9) & 0x7f; + pcinfo->pwr_i[2] = (val >> 4) & 0x1f; + pcinfo->pddac_i[2] = (val >> 9) & 0x7f; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr[2][0] = - (val >> 0) & 0xf; - chan_pcal_info->pddac[2][0] = - (val >> 4) & 0x3f; - chan_pcal_info->pwr[2][1] = - (val >> 10) & 0xf; - - chan_pcal_info->pddac[2][1] = - (val >> 14) & 0x3; + pcinfo->pwr[2][0] = (val >> 0) & 0xf; + pcinfo->pddac[2][0] = (val >> 4) & 0x3f; + pcinfo->pwr[2][1] = (val >> 10) & 0xf; + + pcinfo->pddac[2][1] = (val >> 14) & 0x3; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[2][1] |= - (val & 0xF) << 2; + pcinfo->pddac[2][1] |= (val & 0xF) << 2; - chan_pcal_info->pwr[2][2] = - (val >> 4) & 0xf; - chan_pcal_info->pddac[2][2] = - (val >> 8) & 0x3f; + pcinfo->pwr[2][2] = (val >> 4) & 0xf; + pcinfo->pddac[2][2] = (val >> 8) & 0x3f; - chan_pcal_info->pwr[2][3] = 0; - chan_pcal_info->pddac[2][3] = 0; + pcinfo->pwr[2][3] = 0; + pcinfo->pddac[2][3] = 0; } else if (pd_gains == 2) { - chan_pcal_info->pwr[1][3] = - (val >> 4) & 0xf; - chan_pcal_info->pddac[1][3] = - (val >> 8) & 0x3f; + pcinfo->pwr[1][3] = (val >> 4) & 0xf; + pcinfo->pddac[1][3] = (val >> 8) & 0x3f; } if (pd_gains > 3) { - chan_pcal_info->pwr_i[3] = (val >> 14) & 0x3; + pcinfo->pwr_i[3] = (val >> 14) & 0x3; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr_i[3] |= ((val >> 0) & 0x7) << 2; + pcinfo->pwr_i[3] |= ((val >> 0) & 0x7) << 2; - chan_pcal_info->pddac_i[3] = (val >> 3) & 0x7f; - chan_pcal_info->pwr[3][0] = - (val >> 10) & 0xf; - chan_pcal_info->pddac[3][0] = - (val >> 14) & 0x3; + pcinfo->pddac_i[3] = (val >> 3) & 0x7f; + pcinfo->pwr[3][0] = (val >> 10) & 0xf; + pcinfo->pddac[3][0] = (val >> 14) & 0x3; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[3][0] |= - (val & 0xF) << 2; - chan_pcal_info->pwr[3][1] = - (val >> 4) & 0xf; - chan_pcal_info->pddac[3][1] = - (val >> 8) & 0x3f; - - chan_pcal_info->pwr[3][2] = - (val >> 14) & 0x3; + pcinfo->pddac[3][0] |= (val & 0xF) << 2; + pcinfo->pwr[3][1] = (val >> 4) & 0xf; + pcinfo->pddac[3][1] = (val >> 8) & 0x3f; + + pcinfo->pwr[3][2] = (val >> 14) & 0x3; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr[3][2] |= - ((val >> 0) & 0x3) << 2; + pcinfo->pwr[3][2] |= ((val >> 0) & 0x3) << 2; - chan_pcal_info->pddac[3][2] = - (val >> 2) & 0x3f; - chan_pcal_info->pwr[3][3] = - (val >> 8) & 0xf; + pcinfo->pddac[3][2] = (val >> 2) & 0x3f; + pcinfo->pwr[3][3] = (val >> 8) & 0xf; - chan_pcal_info->pddac[3][3] = - (val >> 12) & 0xF; + pcinfo->pddac[3][3] = (val >> 12) & 0xF; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[3][3] |= - ((val >> 0) & 0x3) << 4; + pcinfo->pddac[3][3] |= ((val >> 0) & 0x3) << 4; } else if (pd_gains == 3) { - chan_pcal_info->pwr[2][3] = - (val >> 14) & 0x3; + pcinfo->pwr[2][3] = (val >> 14) & 0x3; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr[2][3] |= - ((val >> 0) & 0x3) << 2; - - chan_pcal_info->pddac[2][3] = - (val >> 2) & 0x3f; - } + pcinfo->pwr[2][3] |= ((val >> 0) & 0x3) << 2; - for (c = 0; c < pd_gains; c++) { - /* Recreate pwr table for this channel using pwr steps */ - chan_pcal_info->pwr[c][0] += chan_pcal_info->pwr_i[c] * 2; - chan_pcal_info->pwr[c][1] += chan_pcal_info->pwr[c][0]; - chan_pcal_info->pwr[c][2] += chan_pcal_info->pwr[c][1]; - chan_pcal_info->pwr[c][3] += chan_pcal_info->pwr[c][2]; - if (chan_pcal_info->pwr[c][3] == chan_pcal_info->pwr[c][2]) - chan_pcal_info->pwr[c][3] = 0; - - /* Recreate pddac table for this channel using pddac steps */ - chan_pcal_info->pddac[c][0] += chan_pcal_info->pddac_i[c]; - chan_pcal_info->pddac[c][1] += chan_pcal_info->pddac[c][0]; - chan_pcal_info->pddac[c][2] += chan_pcal_info->pddac[c][1]; - chan_pcal_info->pddac[c][3] += chan_pcal_info->pddac[c][2]; - if (chan_pcal_info->pddac[c][3] == chan_pcal_info->pddac[c][2]) - chan_pcal_info->pddac[c][3] = 0; + pcinfo->pddac[2][3] = (val >> 2) & 0x3f; } } - return 0; + return ath5k_eeprom_convert_pcal_info_2413(ah, mode, chinfo); } + /* * Read per rate target power (this is the maximum tx power * supported by the card). This info is used when setting @@ -1154,11 +1404,12 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) * * This also works for v5 EEPROMs. */ -static int ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) +static int +ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; struct ath5k_rate_pcal_info *rate_pcal_info; - u16 *rate_target_pwr_num; + u8 *rate_target_pwr_num; u32 offset; u16 val; int ret, i; @@ -1264,7 +1515,9 @@ ath5k_eeprom_read_pcal_info(struct ath5k_hw *ah) else read_pcal = ath5k_eeprom_read_pcal_info_5111; - for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) { + + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; + mode++) { err = read_pcal(ah, mode); if (err) return err; @@ -1277,6 +1530,62 @@ ath5k_eeprom_read_pcal_info(struct ath5k_hw *ah) return 0; } +static int +ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *chinfo; + u8 pier, pdg; + + switch (mode) { + case AR5K_EEPROM_MODE_11A: + if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + if (!AR5K_EEPROM_HDR_11B(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } + + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + if (!chinfo[pier].pd_curves) + continue; + + for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { + struct ath5k_pdgain_info *pd = + &chinfo[pier].pd_curves[pdg]; + + if (pd != NULL) { + kfree(pd->pd_step); + kfree(pd->pd_pwr); + } + } + + kfree(chinfo[pier].pd_curves); + } + + return 0; +} + +void +ath5k_eeprom_detach(struct ath5k_hw *ah) +{ + u8 mode; + + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) + ath5k_eeprom_free_pcal_info(ah, mode); +} + /* Read conformance test limits used for regulatory control */ static int ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah) @@ -1457,3 +1766,4 @@ bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah) else return false; } + diff --git a/drivers/net/wireless/ath5k/eeprom.h b/drivers/net/wireless/ath5k/eeprom.h index 1deebc0257d4..b0c0606dea0b 100644 --- a/drivers/net/wireless/ath5k/eeprom.h +++ b/drivers/net/wireless/ath5k/eeprom.h @@ -173,6 +173,7 @@ #define AR5K_EEPROM_N_5GHZ_CHAN 10 #define AR5K_EEPROM_N_2GHZ_CHAN 3 #define AR5K_EEPROM_N_2GHZ_CHAN_2413 4 +#define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4 #define AR5K_EEPROM_MAX_CHAN 10 #define AR5K_EEPROM_N_PWR_POINTS_5111 11 #define AR5K_EEPROM_N_PCDAC 11 @@ -193,7 +194,7 @@ #define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10) #define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32) #define AR5K_EEPROM_MAX_CTLS 32 -#define AR5K_EEPROM_N_XPD_PER_CHANNEL 4 +#define AR5K_EEPROM_N_PD_CURVES 4 #define AR5K_EEPROM_N_XPD0_POINTS 4 #define AR5K_EEPROM_N_XPD3_POINTS 3 #define AR5K_EEPROM_N_PD_GAINS 4 @@ -232,7 +233,7 @@ enum ath5k_ctl_mode { AR5K_CTL_11B = 1, AR5K_CTL_11G = 2, AR5K_CTL_TURBO = 3, - AR5K_CTL_108G = 4, + AR5K_CTL_TURBOG = 4, AR5K_CTL_2GHT20 = 5, AR5K_CTL_5GHT20 = 6, AR5K_CTL_2GHT40 = 7, @@ -240,65 +241,114 @@ enum ath5k_ctl_mode { AR5K_CTL_MODE_M = 15, }; +/* Default CTL ids for the 3 main reg domains. + * Atheros only uses these by default but vendors + * can have up to 32 different CTLs for different + * scenarios. Note that theese values are ORed with + * the mode id (above) so we can have up to 24 CTL + * datasets out of these 3 main regdomains. That leaves + * 8 ids that can be used by vendors and since 0x20 is + * missing from HAL sources i guess this is the set of + * custom CTLs vendors can use. */ +#define AR5K_CTL_FCC 0x10 +#define AR5K_CTL_CUSTOM 0x20 +#define AR5K_CTL_ETSI 0x30 +#define AR5K_CTL_MKK 0x40 + +/* Indicates a CTL with only mode set and + * no reg domain mapping, such CTLs are used + * for world roaming domains or simply when + * a reg domain is not set */ +#define AR5K_CTL_NO_REGDOMAIN 0xf0 + +/* Indicates an empty (invalid) CTL */ +#define AR5K_CTL_NO_CTL 0xff + /* Per channel calibration data, used for power table setup */ struct ath5k_chan_pcal_info_rf5111 { /* Power levels in half dbm units * for one power curve. */ - u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111]; + u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111]; /* PCDAC table steps * for the above values */ - u8 pcdac[AR5K_EEPROM_N_PWR_POINTS_5111]; + u8 pcdac[AR5K_EEPROM_N_PWR_POINTS_5111]; /* Starting PCDAC step */ - u8 pcdac_min; + u8 pcdac_min; /* Final PCDAC step */ - u8 pcdac_max; + u8 pcdac_max; }; struct ath5k_chan_pcal_info_rf5112 { /* Power levels in quarter dBm units * for lower (0) and higher (3) - * level curves */ - s8 pwr_x0[AR5K_EEPROM_N_XPD0_POINTS]; - s8 pwr_x3[AR5K_EEPROM_N_XPD3_POINTS]; + * level curves in 0.25dB units */ + s8 pwr_x0[AR5K_EEPROM_N_XPD0_POINTS]; + s8 pwr_x3[AR5K_EEPROM_N_XPD3_POINTS]; /* PCDAC table steps * for the above values */ - u8 pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS]; - u8 pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS]; + u8 pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS]; + u8 pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS]; }; struct ath5k_chan_pcal_info_rf2413 { /* Starting pwr/pddac values */ - s8 pwr_i[AR5K_EEPROM_N_PD_GAINS]; - u8 pddac_i[AR5K_EEPROM_N_PD_GAINS]; - /* (pwr,pddac) points */ - s8 pwr[AR5K_EEPROM_N_PD_GAINS] - [AR5K_EEPROM_N_PD_POINTS]; - u8 pddac[AR5K_EEPROM_N_PD_GAINS] - [AR5K_EEPROM_N_PD_POINTS]; + s8 pwr_i[AR5K_EEPROM_N_PD_GAINS]; + u8 pddac_i[AR5K_EEPROM_N_PD_GAINS]; + /* (pwr,pddac) points + * power levels in 0.5dB units */ + s8 pwr[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_N_PD_POINTS]; + u8 pddac[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_N_PD_POINTS]; +}; + +enum ath5k_powertable_type { + AR5K_PWRTABLE_PWR_TO_PCDAC = 0, + AR5K_PWRTABLE_LINEAR_PCDAC = 1, + AR5K_PWRTABLE_PWR_TO_PDADC = 2, +}; + +struct ath5k_pdgain_info { + u8 pd_points; + u8 *pd_step; + /* Power values are in + * 0.25dB units */ + s16 *pd_pwr; }; struct ath5k_chan_pcal_info { /* Frequency */ u16 freq; - /* Max available power */ - s8 max_pwr; + /* Tx power boundaries */ + s16 max_pwr; + s16 min_pwr; union { struct ath5k_chan_pcal_info_rf5111 rf5111_info; struct ath5k_chan_pcal_info_rf5112 rf5112_info; struct ath5k_chan_pcal_info_rf2413 rf2413_info; }; + /* Raw values used by phy code + * Curves are stored in order from lower + * gain to higher gain (max txpower -> min txpower) */ + struct ath5k_pdgain_info *pd_curves; }; -/* Per rate calibration data for each mode, used for power table setup */ +/* Per rate calibration data for each mode, + * used for rate power table setup. + * Note: Values in 0.5dB units */ struct ath5k_rate_pcal_info { u16 freq; /* Frequency */ - /* Power level for 6-24Mbit/s rates */ + /* Power level for 6-24Mbit/s rates or + * 1Mb rate */ u16 target_power_6to24; - /* Power level for 36Mbit rate */ + /* Power level for 36Mbit rate or + * 2Mb rate */ u16 target_power_36; - /* Power level for 48Mbit rate */ + /* Power level for 48Mbit rate or + * 5.5Mbit rate */ u16 target_power_48; - /* Power level for 54Mbit rate */ + /* Power level for 54Mbit rate or + * 11Mbit rate */ u16 target_power_54; }; @@ -330,12 +380,6 @@ struct ath5k_eeprom_info { u16 ee_cck_ofdm_power_delta; u16 ee_scaled_cck_delta; - /* Used for tx thermal adjustment (eeprom_init, rfregs) */ - u16 ee_tx_clip; - u16 ee_pwd_84; - u16 ee_pwd_90; - u16 ee_gain_select; - /* RF Calibration settings (reset, rfregs) */ u16 ee_i_cal[AR5K_EEPROM_N_MODES]; u16 ee_q_cal[AR5K_EEPROM_N_MODES]; @@ -363,23 +407,25 @@ struct ath5k_eeprom_info { /* Power calibration data */ u16 ee_false_detect[AR5K_EEPROM_N_MODES]; - /* Number of pd gain curves per mode (RF2413) */ - u8 ee_pd_gains[AR5K_EEPROM_N_MODES]; + /* Number of pd gain curves per mode */ + u8 ee_pd_gains[AR5K_EEPROM_N_MODES]; + /* Back mapping pdcurve number -> pdcurve index in pd->pd_curves */ + u8 ee_pdc_to_idx[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PD_GAINS]; - u8 ee_n_piers[AR5K_EEPROM_N_MODES]; + u8 ee_n_piers[AR5K_EEPROM_N_MODES]; struct ath5k_chan_pcal_info ee_pwr_cal_a[AR5K_EEPROM_N_5GHZ_CHAN]; - struct ath5k_chan_pcal_info ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN]; - struct ath5k_chan_pcal_info ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN]; + struct ath5k_chan_pcal_info ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; + struct ath5k_chan_pcal_info ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; /* Per rate target power levels */ - u16 ee_rate_target_pwr_num[AR5K_EEPROM_N_MODES]; + u8 ee_rate_target_pwr_num[AR5K_EEPROM_N_MODES]; struct ath5k_rate_pcal_info ee_rate_tpwr_a[AR5K_EEPROM_N_5GHZ_CHAN]; - struct ath5k_rate_pcal_info ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN]; - struct ath5k_rate_pcal_info ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN]; + struct ath5k_rate_pcal_info ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; + struct ath5k_rate_pcal_info ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; /* Conformance test limits (Unused) */ - u16 ee_ctls; - u16 ee_ctl[AR5K_EEPROM_MAX_CTLS]; + u8 ee_ctls; + u8 ee_ctl[AR5K_EEPROM_MAX_CTLS]; struct ath5k_edge_power ee_ctl_pwr[AR5K_EEPROM_N_EDGES * AR5K_EEPROM_MAX_CTLS]; /* Noise Floor Calibration settings */ -- 2.30.2