From 8dc7623bf608495b6e6743e805807c7840673573 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 14 Dec 2018 11:36:15 +0200 Subject: [PATCH] usb: ehci-omap: Fix deferred probe for phy handling PHY model is being used on omap5 platforms even if port mode is not OMAP_EHCI_PORT_MODE_PHY. So don't guess if PHY is required or not based on PHY mode. If PHY is provided in device tree, it must be required. So, if devm_usb_get_phy_by_phandle() gives us an error code other than -ENODEV (no PHY) then error out. This fixes USB Ethernet on omap5-uevm if PHY happens to probe after EHCI thus causing a -EPROBE_DEFER. Cc: Johan Hovold Cc: Ladislav Michl Reported-by: Peter Ujfalusi Signed-off-by: Roger Quadros Tested-by: Peter Ujfalusi Acked-by: Tony Lindgren Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-omap.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 7e4c13346a1e..7d20296cbe9f 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -159,11 +159,12 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) /* get the PHY device */ phy = devm_usb_get_phy_by_phandle(dev, "phys", i); if (IS_ERR(phy)) { - /* Don't bail out if PHY is not absolutely necessary */ - if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) + ret = PTR_ERR(phy); + if (ret == -ENODEV) { /* no PHY */ + phy = NULL; continue; + } - ret = PTR_ERR(phy); if (ret != -EPROBE_DEFER) dev_err(dev, "Can't get PHY for port %d: %d\n", i, ret); -- 2.30.2